Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Physicochemical investigation of NiAl with small molybdenum additions

Specimens of four cast NiAl alloys, three of them containing 0.5, 1.0 and 1.5 at. % Mo., were homogenized for 10, 10, and 140 hr at 1373, 1523 and 1273 K, respectively, then kept at 1073, 1173 and 1323 K for 60, 120 and 3 hr, respectively, and quenched in icy water. The precipitation of a metastable Ni3Mo phase was observed at temperatures between 1073 and 1523 K. Molybdenum substituted for nickel was found to inhibit the lattice disordering in NiAl at 1073 and 1523 K.

Troshkina, V. A.↗

Enhanced erythrocyte suspension layer stability achieved by surface tension lowering additives

In connection with a fractionation procedure involving the separation of particles, a dilute suspension of these particles in a liquid is carefully layered on a dense liquid. Under ideal conditions, the suspension forms a zone of finite thickness with a 'sharp' interface between the suspension layer and the supporting liquid. Under an applied field, e.g., gravitational or electrical, the particles in the suspension layer migrate to form different layers according to their size and/or density or according to their electrophoretic mobilities. However, in many cases the ideal conditions necessary for the fractionation process are not obtained. Many studies have been conducted to explore the reasons for suspension layer 'instability'. The present investigation represents an extension of a study conducted by Omenyi et al. (1981). An electrostatic repulsion-van der Waals mechanism was used to study the stability of fixed erythrocyte suspensions layered on a D2O cushion.

Omenyi, S. N.↗

Additive for zinc electrodes

A zinc electrode for alkaline cells includes up to about ten percent by weight of Ba(OH)2.8H2O with about five percent being preferred. The zinc electrode may or may not be amalgamated with mercury.

Soltis, D. G.↗

Software reliability: Additional investigations into modeling with replicated experiments

The effects of programmer experience level, different program usage distributions, and programming languages are explored. All these factors affect performance, and some tentative relational hypotheses are presented. An analytic framework for replicated and non-replicated (traditional) software experiments is presented. A method of obtaining an upper bound on the error rate of the next error is proposed. The method was validated empirically by comparing forecasts with actual data. In all 14 cases the bound exceeded the observed parameter, albeit somewhat conservatively. Two other forecasting methods are proposed and compared to observed results. Although demonstrated relative to this framework that stages are neither independent nor exponentially distributed, empirical estimates show that the exponential assumption is nearly valid for all but the extreme tails of the distribution. Except for the dependence in the stage probabilities, Cox's model approximates to a degree what is being observed.

Nagel, P. M.↗

Process for improving mechanical properties of epoxy resins by addition of cobalt ions

A resin product useful as an adhesive, composite or casting resin is described as well as the process used in its preparation to improve its flexural strength mechanical property characteristics. Improved flexural strength is attained with little or no change in density, thermal stability or moisture resistance by chemically incorporating 1.2% to 10.6% by weight Co(3) ions in an epoxidized resin system.

Stoakley, D. M.↗

Radio searches for additional interstellar molecules

Observations in the 2-mm wavelength range are reported which yield new interstellar molecular transitions of NH2CHO, SO2, H2CCO, U150820.5, and U150850.0 toward Sgr B2, and SO2, CH2CHCN, HCOOCH3, and U153513.0 toward Orion A. The first interstellar searches for HOCl, CH3CH2CCH, and CH3SiH3 were conducted, but these species were not detected. During these observations limits were also obtained on 2-mm wave transitions of N2O and NaOH toward several galactic sources of molecular emission.

Hollis, J. M.↗

Observations of NGC 7027 from 5.2 to 7.5 microns - The detection of Ni II and additional dust features

NGC 7027 was observed with a multichannel grating spectrometer from 5.2 to 7.5 microns at a spectral resolving power of 120-200. Two new dust emission features are resolved at 5.62 and 6.95 microns, and for the first time the Ni II fine-structure line at 6.64 microns is detected. It is shown that a single molecular dust constituent might account for six of the nine observed dust features between 2 and 14 microns. The strength of the Ni II line indicates either that Ni is not depleted in the neutral gas, or that the line is formed at high density.

Bregman, J. D.↗

A two-dimensional analysis of laser heat addition in converging nozzles

The two-dimensional equations of motion describing the interaction between a laser beam and a flowing gas are considered. An implicit numerical scheme is used to solve these equations for unchoked flow through a converging-diverging nozzle. Separate grids are used for the fluid dynamics and the radiation equations. The effects of beam focusing and cross-beam intensity profiles are included. The calculations are based upon real gas properties for all quantities except the gas absorptivity, which is taken as a constant. The solutions contain the expected hot central core region with cool gas near the walls. This results in steep temperature gradients in both the streamwise and cross-stream directions. The absorption zone acts as a blockage in the nozzle causing a nonuniform velocity profile at the inlet and an overall decrease in mass flow. The absorption region also forces the streamlines to move away from the axis of symmetry, although this effect is not strong.

Molvik, G. A.↗

The absorption near 1400 A in the spectra of additional DA white dwarfs

Ultraviolet spectroscopic observations of five white dwarfs having published spectral types of DA made with the International Ultraviolet Explorer (IUE) satellite are reported. The three coolest objects: GD279 (0148 + 46), W485A (1327 - 08), and G231 - 40 (2117 + 53) have easily detected absorptions near lambda 1400. Of the two remaining stars, PG0039 + 045 may not be a true DA and GD140 (1134 + 30) is apparently too hot to show any feature near lambda 1400. It is argued that the lambda 1400 feature is produced by the lambda 1420 photoionization edge of Ca II.

Wegner, G.↗

A means for stationing additional geosynchronous satellites and space ladder

A practical method is analytically shown for multiplying the number of orbital slots for synchronous satellites. This is by radially tethering satellites above the synchronous orbit (forces outwards) balanced to satellites below this orbit (forces inwards). The term practical applies because the tether tension force is of second order smallness. Thus, several thousand miles of synchronous satellites can be radiated along a small tether line sized for tension of about one percent of a satellite weight. A vertical tether line also provides a track for transport, that is, a ladder or elevator. Analysis for an optimized diameter tether line is developed which is particularly effective when the tether, line is extended to the ground, thus, making a space ladder. Mars is the best candidate for a space ladder. With the optimized tether the total system mass is minimum when the outer satellite is far out. Tethered satellites have G-forces.

Deyoung, J.↗

Effects of silver and group 2 fluorides addition to plasma sprayed chromium carbide high temperature solid lubricant for foil gas bearing to 650 deg C

A new self-lubricating coating composition of nickel aluminide-bonded chromium carbide formulated with silver and Group II fluorides was developed in a research program on high temperature solid lubricants. One of the proposed applications for this new coating composition is as a wide temperature spectrum solid lubricant for complaint foil gas bearings. Friction and wear properties were obtained using a foil gas bearing start/stop apparatus at temperatures from 25 to 650 C. The journals were Inconel 718. Some were coated with the plasma sprayed experimental coating, others with unmodified nickel aluminide/chromium carbide as a baseline for comparison. The addtitional components were provided to assist in achieving low friction over the temperature range of interest. Uncoated, preoxidized Inconel X-750 foil bearings were operated against these surfaces. The foils were subjected to repeated start/stop cycles under a 14-kPa (2-psi) bearing unit loading. Sliding contact occurred during lift-off and coastdown at surface velocities less than 6 m/s (3000 rpm). Testing continued until 9000 start/stop cycles were accumulated or until a rise in starting torque indicated the journal/bearing had failed. Comparison in coating performance as well as discussions of their properties and methods of application are given.

Wagner, R. C.↗

Additional flow field studies of the GA(W)-1 airfoil with 30-percent chord Fowler flap including slot-gap variations and cove shape modifications

Experimental measurements were made to determine the effects of slot gap opening and flap cove shape on flap and airfoil flow fields. Test model was the GA(W)-1 airfoil with 0.30c Fowler flap deflected 35 degrees. Tests were conducted with optimum, wide and narrow gaps, and with three cove shapes. Three test angles were selected, corresponding to pre-stall and post-stall conditions. Reynolds number was 2,200,000 and Mach number was 0.13. Force, surface pressure, total pressure, and split-film turbulence measurements were made. Results were compared with theory for those parameters for which theoretical values were available.

Wentz, W. H., Jr.↗

Siloxane containing addition polyimides. II - Acetylene terminated polyimides

Acetylene terminated polyimide oligomers having a range of molecular weights have been synthesized by reacting bis (gamma-aminopropyl) tetramethyldisiloxane, aminophenylacetylene and 3, 3', 4, 4' benzophenonetetracarboxylic dianhydride in different molar ratios. The prepolymers were isolated and characterized for melt flow and cure properties. They show promise as adhesives for bonding titanium to titanium and as matrix resins for graphite cloth reinforced composites. The most promising system has been blended in varying proportions with Thermid 600, a commercially available acetylene terminated polyimide oligomer, and the mixtures have been tested for application as composite matrix resins.

Maudgal, S.↗

Rheological characterization of addition polyimide matrix resins and prepregs

Although graphite-reinforced polyimide matrix composites offer outstanding specific strength and stiffness, together with high thermal oxidative stability, processing problems connected with their rheological behavior remain to be addressed. The present rheological studies on neat polyimide resin systems encountered outgassing during cure. A staging technique has been developed which can successfully handle polyimide samples, and novel methods were applied to generate rheological curves for graphite-reinforced prepregs. The commercial graphite/polyimide systems studied were PRM 15, LARC 160, and V378A.

Maximovich, M. G.↗

Coma morphology and dust-emission pattern of periodic comet Halley. III - Additional high-resolution images taken in 1910

High-resolution photographic images of comet Halley obtained at Lick, Helwan, Lowell, and Vienna observatories during May-June 1910 are analyzed using the image-processing algorithm of Larson and Sekanina (1984). The results are presented in tables and compared with analyses of Mt. Wilson plates for the same period (Sekanina and Larson, 1984), and good general agreement is noted. Consideration is given to the position of the rotation pole, features indicative of the nucleus spin rate, the spokelike structure observed on May 21-22, and the expanding gas halo.

Larson, S. M.↗