Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Quantifying the Reactivity of Isolated Li x Si Domains in Si Anodes Using Operando NMR

The use of Si anodes can greatly improve the energy density of Li-ion batteries. However, understanding and mitigation of calendar aging remains a barrier to commercialization. Here, in this short report, we utilize operando Nuclear Magnetic Resonance (NMR) spectroscopy to detect and quantify lithium silicides (Li x Si) as they form and react within Si anodes in pouch cells during calendar aging. We provide direct experimental evidence of complex aging phenomena in the Si anodes, including both SEI growth and dissolution during storage. Formation of electrochemically isolated Li x Si is also observed, as indicated by the partial persistence of highly lithiated phases after the cell is discharged. Remarkably, we show that these isolated domains can themselves self-discharge over time, suggesting that their detection can be challenging in post-mortem studies. Finally, we show that aging outcomes depend heavily on the type of silicon particles contained within the electrode, and that certain surface coatings can help decrease the reactivity between lithium silicides and the electrolyte.

Li-ion battery↗
DOE OSTI2025

Evaluating Brightness and Stability of Cathodoluminescence from Colloidal Semiconductor Nanocrystals

Cathodoluminescence offers promise as a technique for correlation of atomic structure with electronic structure at the level of individual nanoparticles or even defects, with the ability to analyze complex nanostructures at length-scales far below those typically available to optical spectroscopy. Unlike other forms of electron microscopy, cathodoluminescence offers direct insights into the electronic structure of the visualized sample. Despite reports more than 10 years ago of individual nanoparticle cathodoluminescence, effective cathodoluminescence collection from colloidal semiconductor materials is relatively rare and remains challenging due to the instability of materials under the conditions of electron beam irradiation. In this work, to clarify the roadblocks for cathodoluminescence analysis of colloidal nanocrystals, we attempt a comprehensive study of the cathodoluminescence properties of semiconductor quantum shells, which have a thin concentric CdSe shell surrounding CdS nanoparticles, then surrounded by a further concentric CdS shell. These same materials were recently demonstrated to show promising scintillation performance in radioluminescence measurements, including high brightness (up to 100 ph/keV) and excellent durability. Comparative quantum yield measurements are designed to assess the brightness of semiconductor nanocrystal films, which show that the quantum shells are much less bright under electron irradiation compared to X-ray photons. Instability of CL emission is assigned to charging effects on the samples—and not thermal effects—through a series of voltage, current, dwell time, and atmospheric pressure experiments.

cathodoluminescence↗
DOE OSTI2025

CdSe Magic-Size Clusters Deviate from Nanocrystal-Size Scalings for Ultrafast Intraband Relaxation and Auger Recombination

The cluster regime of colloidal semiconductor quantum dots (QDs) occupies an interesting space on the continuum from molecule to bulk material and allow the study of QD properties at extreme quantum confinement limits. For typical QDs, several size-dependent property trends are well established including intraband relaxation rates and universal scaling of Auger recombination with particle volume. Advances in synthesis now allow isolation of atomically precise semiconductor magic-size clusters (MCs), which offer experimental insight regarding how electronic structure changes with particle size in the ultrasmall limit. Here, we report intraband cooling and Auger recombination for several stable CdSe MCs as a function of particle size and observe deviation from QD response in the cluster regime. We additionally show optical signatures ascribed to transient disordering 2 that appear in the single exciton regime for MCs, which point to complexities regarding their implementation.

Auger recombination↗
DOE OSTI2026

Tracking Thermal Transport in Colloidal Quantum Dot Films Using in Situ Time-Resolved X-ray Diffraction

Colloidal quantum dots (QDs) and their thin films are increasingly used in electronic and photonic devices replacing traditional bulk semiconductors. However, thermal properties of QDs remain underexplored relative to device development efforts. This study shows the use of time-resolved X-ray diffraction as a contact-free method to probe the thermal response of QDs in environments representative of the active layer in QD optoelectronic devices, providing in situ insights for future thermal management strategies. Through the extraction of Debye–Waller factors on a subnanosecond time scale, we directly capture the heating and cooling of core/shell CdSe/CdS QDs following pulsed optical excitation. In a QD thin film that actively provides optical gain, the thermal conductivity is found to be as low as 0.13 W m –1 K –1 , because of the poor heat flow between close-packed QD solids. For QDs dispersed in liquids, interfacial thermal conductance dominates thermal relaxation, with a conductance of 15 MW m –2 K –1 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ultrastable Gold Nanostars via Bottlebrush-like Block Copolymers

Gold (Au) nanostars are plasmonic nanostructures possessing potentials for small molecule detection, photocatalytic activities, and photothermal therapy. However, Au nanostars synthesized in the traditional way are often plagued by poor photo, thermal, and chemical stabilities. Here, we report an unconventional route to the synthesis of ultrastable colloidal Au nanostars enabled by bottlebrush-like block copolymers (BBCPs), dispensing with the need for Au seeds. Crafting of Au nanostars using BBCPs is rendered by bridging the latter with Au 3+ ions as cross-linkers that have multiple coordination sites. Notably, the presence of a covalently tethered polymer shell on the surface of Au nanostars (i.e., polymer-ligated Au nanostars) imparts remarkably high stability under high temperature and laser excitation over conventional cetyltrimethylammonium bromide (CTAB)-mediated Au nanostars. Due to enhanced laser stability, plasmonic fields near Au nanostars can be visualized under high laser fluence by ultrafast electron microscopy (UEM) without morphological degradation. Notably, the presence of insulating polystyrene chains does not compromise the plasmonic field distribution, with the highest field intensity observed along the star arms. In conclusion, the greatly improved long-term photo, thermal, and chemical stabilities make Au nanostars a prospective noble metal nanomaterial for a range of sensing applications.

Cellulose↗
DOE OSTI2025

Critical Insights into Solvent Choice for High-Voltage Organosulfur Electrolytes

Organosulfur electrolytes are promising candidates for enabling high-voltage cathodes due to their superior oxidative stability compared to conventional carbonate-based systems. However, their viscous nature and inability to passivate the anode necessitate the use of passivating agents and diluents to achieve meaningful charge/discharge rates. In this study, we investigate the use of cyclic fluorinated carbonates (CFCs) to form passivating interphases on electrode surfaces, aiming to optimize electrolyte performance in high-voltage systems. Electrolyte formulations containing 1.2 M LiPF 6 in a CFC:sulfone:1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TTE) mixture (2/5/3 V/V/V) were assessed in full-cell configurations with a LiNi 0.8 Mn 0.1 Co 0.1 O 2 (FCG-NMC) cathode and a 4.5 V upper cutoff potential. The results reveal that 3-3-3-trifluoropropylene carbonate (TFPC) combined with ethyl methyl sulfone (EMS) optimizes electrolyte performance, resulting in lower resistance buildup and reduced capacity loss compared to commercial electrolytes. We also explore the failure mechanisms of several carbonate/sulfone mixtures and identify key considerations for electrolyte compatibility in high-voltage systems. TFPC enhances cycling stability and lowers overall cell resistance, while fluoroethylene carbonate (FEC) formulations, despite higher ionic conductivity, fail to form adequate passivation layers, leading to rapid capacity loss. Additionally, EMS provides superior physical properties that avoid common failure modes seen with other sulfone solvents like methyl isopropyl sulfone and tetramethylene sulfone. Furthermore, this study underscores the importance of carefully selecting passivating carbonates and sulfone solvents to improve electrolyte performance and expand the viability of high-voltage electrolyte systems.

LiNi0.8Mn0.1Co0.1O2 cathode↗
DOE OSTI2025

Facet-Dependent Hydrogen Evolution Reaction on M 2 P (M = Ni, Co, Fe) Single Crystals

Transition-metal phosphides (MPs) are promising earth-abundant catalysts for hydrogen evolution reactions (HERs) due to their remarkable activity and stability. To further improve their properties, facet control is a key strategy. The growth of shape-selected nanoparticles may substantially enhance electrocatalytic activity, but this approach requires fundamental studies of facet-specific catalytic properties. There are only a few reports on the facet effects of MPs, which leads to a limited understanding of the activity of each facet and hampers catalyst design. Here, in this study, we grew large hexagonal-prism-shaped single crystals of three representative M 2 P (M = Ni, Co, and Fe) catalysts using metal flux routes. Two facets of M 2 P single crystals were tested to study facet-dependent HER activities, and it was consistently demonstrated that for all M 2 P crystals, a tip facet [(0001) for Ni 2 P/Fe 2 P and (010) for Co 2 P] had a higher activity than the side facet [(101̅0) for Ni 2 P/Fe 2 P and (100) for Co 2 P]. HER activity between the same facet elucidated the activity ordered between different transition metals as Fe 2 P > Co 2 P > Ni 2 P under low-potential regions. At high applied potentials, this trend is reversed due to the differences in Tafel slopes, with Ni 2 P becoming the most active catalyst, such that the activity of the (0001) facet of Ni 2 P approaches that of Pt. The calculated surface density of states (DOS) of each facet and its local curvature were found to be a useful descriptor for the activity trends among different transition metals of the same facets.

Co2P↗
DOE OSTI2026

Confinement Reconstruction Unlocks Stable Ru Single Atom-Doped IrO x Anodes for Long-Term High-Rate CO 2 Electrolysis

IrO 2 is a commonly employed anode catalyst for CO 2 electrolysis in membrane electrode assembly (MEA) systems. However, under high current densities, its structural reconstruction leads to activity loss and stability degradation, limiting the industrial viability of CO 2 electrolysis. In this work, we demonstrated a confinement reconstruction strategy to precisely regulate the structural evolution during electrolysis. Ethylene glycol serves as a structural modulator, protecting the catalyst surface, suppressing soluble species formation, and promoting ordered structural evolution. Single-atom Ru acts as a stability enhancer, forming robust Ir–O–Ru bridging structures that facilitate an ordered transformation from a 4-fold [RuO 4 ]/[IrO 4 ] to a 6-fold symmetry [RuO 6 ]/[IrO 6 ] octahedral framework, thereby enhancing structural rigidity and long-term stability. As a result, in MEA-based CO 2 electrolysis, the catalyst achieves a stable operation at 200 mA cm –2 for 480 h, maintaining a CO selectivity above 80%. Theoretical calculations further elucidate that the enhanced stability originates from the suppression of oxygen vacancy formation, making the lattice-oxygen-mediated mechanism (LOM) potentially less favorable. This work provides insights into the structural evolution of the OER catalysts under high-current-density conditions, paving the way for large-scale CO 2 electrolysis commercialization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Identification of In Situ Generated High-Spin Fe(II)-N 4 Active Sites for Acidic Oxygen Reduction Reaction via Operando 57 Fe Mössbauer Spectroscopy

Iron-nitrogen-carbon (FeNC) catalysts are considered among the most promising alternative to Pt catalysts in acidic oxygen reduction reaction (ORR), yet the geometric and electronic structures of the true active site under reaction conditions have not been clearly elucidated. Herein, we synthesized a representative FeNC catalyst by pyrolyzing Fe 3+ absorbed on ZIF-8-derived N-doped carbon at a mild temperature under the H 2 /Ar atmosphere, where a formation mechanism of FeN 4 sites through a Zn-mediated Fe nanoparticle atomization process was proposed. The resulting FeNC-750 catalyst shows high acidic ORR activity with a half-wave potential of 0.838 V and a peak power density of 1 W cm -2 in proton-exchange membrane fuel cell (PEMFC). By using operando 57 Fe Mössbauer spectroscopy on FeNC-750, it was revealed that the pyrrolic N-coordinated high-spin Fe 2+ N 4 sites, which are in situ generated from high-spin Fe 3+ N 4 during ORR, are identified as catalytic active states. Density functional theory calculations further verified that, compared to the pyridinic N-coordinated low-spin Fe 2+ N 4 , the pyrrolic N-coordinated high-spin Fe 2+ exhibits optimized adsorption energy for reaction intermediates, thereby lowering the energy barrier of the rate-determining step (RDS) and facilitating OH* desorption. In conclusion, this work provides both experimental and theoretical evidence of the true active site in the FeNC during acidic ORR, offering significant insights for the rational design of high-performance materials for acidic fuel cells.

FeNC catalyst↗
DOE OSTI2025

Reproducibility of Radiokrypton in Deep Desert Aquifers: Insights from a Decade of Research

Great technical advances have been achieved since the first atom-trap trace analysis (ATTA) -based radiokrypton application in Egypt, where 1 Myr old groundwater was discovered. Beyond advances in ATTA measurement capabilities, including reduction in sample size, analysis duration, and analytical uncertainty, major progress has been achieved over the past two decades in the sample collection and preparation techniques. These advances paved the expansion of ATTA-based noble gas applications to many other aquifers worldwide, illuminating the nature and flow pattern of deep groundwater systems. While the potential of this new analytical technique for old groundwater dating is well recognized, another important aspect yet to be examined is the reproducibility of radiokrypton in aquifers over time, i.e., how representative is a discrete groundwater sample, collected at a specific time and location, for the natural groundwater system? The likelihood of a negative answer is increased by flow-field disturbance in aquifers following massive groundwater abstraction. Here, in this work, we present repeated 81 Kr sampling and measurements in twenty-one sites over Israel, mostly of deep (up to 1 km) wells tapping confined aquifers in the arid to hyperarid Negev desert. The results demonstrate that radiokrypton measurements are indeed reproducible, even in cases where samples were collected as long as nine years apart and from highly productive (∼1 Mm 3 /yr order) pumping wells. Furthermore, many of the repeated measurements in this study (17 out of the 21 sites) were conducted with different ATTA Instruments in two different laboratories using slightly different sampling, preparation, and analysis techniques, yet with an overall good agreement. The consistency in the ATTA-based 81 Kr-dating results over time highlights the robustness of this state-of-the-art technique as a tool to unravel groundwater flow patterns and encourages further applications to many other yet-to-be-explored deep aquifers.

atom-trap trace analysis↗
DOE OSTI2026

Hg Accumulation by Single-Cell Sulfate-Reducing Bacteria Methylating Mercury

Methylmercury (MeHg) is a potent neurotoxin that poses risks to ecosystems and human health. MeHg is produced by microbes following saturating-like kinetics. We hypothesize that this saturation reflects a limited intracellular mercury (Hg) accumulation. Here, in this study, we investigated Hg accumulation in Pseudodesulfovibrio hydrargyri BerOc1, a sulfate-reducing model strain able to methylate Hg. Cells were incubated with 0.5 and 2 μM of mercury (HgCl 2 ), and mercury localization was studied using synchrotron-based nano-X-ray fluorescence and high-resolution analytical electron microscopy. For both concentrations, Hg was detected in the bacterial cytosol, in addition to extracellular (Hg, S)-containing nanoparticles. Intracellular Hg levels were slightly higher at 2 μM than at 0.5 μM (1.61 vs 1.40 pg.mm –2 ), suggesting a regulated accumulation. However, the population exhibited heterogeneity in Hg accumulation, particularly at the highest Hg exposure, with some cells being Hg hyperaccumulators. Correlative imaging between Hg localization and cell viability revealed that these hyperaccumulating cells were non-active. Our results suggest that active cells regulate Hg accumulation. From an analytical perspective, a minor subpopulation of hyperaccumulating cells can bias bulk measurements and should be considered in interpreting Hg accumulation in microorganisms. Environmentally, these cells can impact Hg cycling by acting as a metal sink.

Intracellular accumulation↗
DOE OSTI2025

High-Nickel Cathodes with Mechanical and Interfacial Robustness via Tailored Concentration Gradients for Stable Li-Ion Batteries

Here, we have developed a versatile mathematical framework integrated with an automated reactor system to design and reify highly customizable full concentration gradient (FCG) in high-nickel cathodes for advanced Li-ion batteries. This method provides precise and independent control of the average composition, slope, and curvature of FCGs, enabling the optimization of structural and mechanical properties of the cathode materials. We have showcased this method with Ni 0.8 Co 0.1 Mn 0.1 (OH) 2 precursors of controlled FCGs, which unlocked an optimized cathode with excellent cycling stability without crack formation after repeated cycles. This work opens up new possibilities for the design and manufacturing of advanced cathode materials, enabling safer, high-performance batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Role of the Mobile Active Site Flap in IMP Dehydrogenase Inhibitor Binding

Inosine 5′-monophosphate dehydrogenase (IMPDH) is a promising antibiotic target. This enzyme catalyzes the NAD-dependent oxidation of inosine 5′-monophosphate (IMP) to xanthosine 5′-monophosphate (XMP), which is the rate-limiting step in guanine nucleotide biosynthesis. Bacterial IMPDH-specific inhibitors have been developed that bind to the NAD + site. These inhibitors display varied affinities to different bacterial IMPDHs that are not easily rationalized by X-ray crystal structures of enzyme–inhibitor complexes. Inspection of X-ray crystal structures of 25 enzyme–inhibitor complexes, including 10 newly described, suggested that a mobile active site flap may be a structural determinant of inhibitor potency. Saturation transfer difference NMR experiments also suggested that the flap may contact the inhibitors to varying extents in different IMPDHs. Flap residue Leu413 contacted some inhibitors but was not structured in the crystal structures of other inhibitor complexes. The substitution of Leu413 with Phe or Ala in Bacillus anthracis IMPDH had inhibitor-selective effects, suggesting residue 413 could be a structural determinant of affinity. Curiously, the Ala substitution increased the potency of most inhibitors, even those that contacted Leu413 in the crystal structures. Presteady-state and steady-state kinetics experiments showed that the Leu413Ala substitution had comparable effects on inhibitor binding to the noncovalent E·IMP complex and the covalent intermediate E-XMP*, suggesting that the flap had similar interactions in both complexes. These results demonstrate that contacts do not necessarily indicate favorable interactions, and poorly structured mobile regions should not be discounted when assessing binding determinants.

Conformation↗
DOE OSTI2026

Robust Interpretation of Electrochemical Impedance Spectra Using Numerical Complex Analysis

Electrochemical Impedance Spectroscopy (EIS) is a noninvasive technique widely used for understanding charge transfer and charge transport processes in electrochemical systems and devices. Standard approaches for the interpretation of EIS data involve starting with a hypothetical circuit model for the physical processes in the device based on experience/intuition and then fitting the EIS data to this circuit model. This work explores a mathematical approach for extracting key characteristic features from EIS data by relying on fundamental principles of complex analysis. These characteristic features can suggest the presence of inductors and constant phase elements (nonideal capacitors) from impedance data and enable us to answer questions about the identifiability and nonuniqueness of equivalent circuit models. In certain scenarios such as models with only resistors and capacitors, we are able to enumerate all possible families of circuit models. Finally, we apply the mathematical framework presented here to real-world electrochemical systems and highlight results using impedance measurements from a lithium-ion battery coin cell.

charge transfer↗
DOE OSTI2025

Synthesis and Self-Assembly of Monodisperse Graphene Nanoribbons: Access to Submicron Architectures with Long-Range Order and Uniform Orientation

Fabricating organic semiconducting materials into large-scale well-organized architectures is critical for building high performance molecular electronics. While graphene nanoribbons (GNRs) hold enormous promise for various device applications, their assembly into a well-structured monolayer or multilayer architecture poses a substantial challenge. Here we report the preparation of length-defined monodisperse GNRs via the integrated iterative binomial synthesis (IIBS) strategy and their self-assembly into submicron-architectures with long-range order, uniform orientation as well as regular layers. Further, the use of short alkyl side chains benefits forming stable multi-layers through interlocking structures. By changing the length and backbone shapes of these monodisperse GNRs, various three-dimensional assemblies including multilayer stripes, monolayer stripes, and nanowires, can be achieved, leading to different photophysical properties and band gaps. The discovery of these intriguing self-assembly behaviors of length-defined GNRs is expected to open the door for various future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Connectivity-Dependent Exciton–Phonon Coupling in Cesium Bismuth Halide Quantum Dots

Metal halide octahedra form the fundamental functional building blocks of metal halide perovskites, dictating their structures, optical properties, electronic structures, and dynamics. Here, in this study, we show that the connectivity of bismuth halide octahedra in Cs 3 Bi 2 Br 9 and Cs 3 Bi 2 I 9 quantum dots (QDs) changes with different halide elements. We use first-principles calculations to reveal the key role of the connectivity of bismuth halide octahedra on the wave function symmetry, Huang-Rhys factor, and exciton-phonon interaction strength. Following QD synthesis via a ligand-mediated transport method, the effect of connectivity is verified with transient absorption spectroscopy, where we contrast Cs 3 Bi 2 Br 9 and Cs 3 Bi 2 I 9 QD exciton dynamics. In photoexcited Cs 3 Bi 2 I 9 QDs, phonons related to the vibrational motions of face-sharing [BiI 6 ] 3- bioctahedra couple strongly to the electronic state and drive rapid carrier relaxation. Equivalent signals are not observed for photoexcited Cs 3 Bi 2 Br 9 QDs, implying a lack of phonon involvement in band-edge absorption and subsequent exciton relaxation. Our findings suggest that structural engineering can effectively tune the exciton-phonon coupling and therefore influence exciton relaxation and recombination in perovskite nanomaterials.

TDDFT↗
DOE OSTI2025

Tunable Spin Qubit Pairs in Quantum Dot–Molecule Conjugates

Organic molecules and quantum dots (QDs) have both shown promise as materials that can host quantum bits (qubits). This is in part because of their synthetic tunability. The current work employs a combination of both materials to demonstrate a series of tunable quantum dot–organic molecule conjugates that can both host photogenerated spin-based qubit pairs (SQPs) and sensitize molecular triplet states. The photogenerated qubit pairs, composed of a spin-correlated radical pair (SCRP), are particularly intriguing since they can be initialized in well-defined, nonthermally populated, quantum states. Additionally, the radical pair enables charge recombination to a polarized molecular triplet state, also in a well-defined quantum state. The materials underlying this system are an organic molecular chromophore and electron donor, 9,10-bis(phenylethynyl)anthracene, and a quantum dot acceptor composed of ZnO. We prepare a series of quantum dot–molecule conjugates that possess variable quantum dot size and two different linker lengths connecting the two moieties. Optical spectroscopy revealed that the QD–molecule conjugates undergo photoexcited charge separation to generate long-lived charge-separated radical pairs. The resulting spin states are probed using light-induced time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy, revealing the presence of singlet-generated SCRPs and molecular triplet states. Notably, the EPR spectra of the radical pairs are dependent on the geometry of this highly tunable system. The g value of the ZnO QD anion is size tunable, and the line widths are influenced by radical pair separation. Overall, this work demonstrates the power of synthetic tunability in adjusting the spin specific addressability, satisfying a key requirement of functional qubit systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Construction of MoS 2 /MoO 3 Heterostructure with Ultrafast-Charged and Superior Low-Temperature Sodium Storage Properties

The electrochemical reaction kinetics of sodium-ion batteries (SIBs) become sluggish at low temperatures, resulting in significant reductions in energy density and power density. Rational design of anode materials with excellent low-temperature performance is of great significance for promoting the application of SIBs under extreme conditions. Here, in this study, the spontaneous hydrolysis and oxidation reactions of MoS 2 in aqueous solution are used to successfully construct the MoS 2 /MoO 3 heterostructure. The formation of built-in electric fields at the MoS 2 /MoO 3 heterointerfaces improves the electrochemical reaction kinetics, thereby enhancing the rate performance. In addition, the dual-phase material can effectively buffer the volume strain during the cycle process, thereby improving the cycle stability. Thus, the MoS 2 /MoO 3 displays ultrafast charging properties at room temperature (up to 244.6 mAh g –1 at 40 A g –1 , discharge/charge in 22 s). Even at −40 °C, it also exhibits a high capacity of 303.7 mAh g –1 and superior cycling performance (capacity retention rate up to 92.9% after 900 cycles at 2 A g –1 ).

MoS2↗