Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Crystal structure, thermally stability and photoluminescence properties of novel Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} phosphors

A series of novel luminescent phosphors Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} with apatite structure were synthesized via a high temperature solid-state reaction. The phase structure, photoluminescence (PL) properties, the PL thermal stability, as well as the fluorescence decay curves of the samples were investigated to characterize the resulting samples, and the selected Sr{sub 9.97}(PO{sub 4}){sub 6}O:0.03Eu{sup 2+} phosphor exhibits strong thermal quenching resistance, retaining the luminance of 88.73% at 150 °C. The quenching concentration of Eu{sup 2+} in Sr{sub 10}(PO{sub 4}){sub 6}O was about 0.03 attributing to the dipole–quadrupole interaction. The Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} phosphor exhibited a broad-band blue emission at 439 nm upon excitation at 346 nm. The results indicate that Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} phosphors have potential applications as near UV-convertible phosphors for white-light UV LEDs. - Graphical abstract: Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} phosphors have potential applications as near UV-convertible phosphors for white-light UV LEDs. - Highlights: • Sr{sub 9.97}(PO{sub 4}){sub 6}O:0.03Eu{sup 2+} phosphor exhibits strong thermal quenching resistance. • Two different Eu{sup 2+} emission centers exists in Sr{sub 10}(PO{sub 4}){sub 6}O. • The activation energy was also estimated for the Eu{sup 2+} luminescence center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acceptor doping of Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Dy, Ho, Yb) pyrochlores with divalent cations (Mg, Ca, Sr, Zn)

New LANTIOX high-temperature conductors with the pyrochlore structure, (Ln{sub 1-x}A{sub x}){sub 2}Ti{sub 2}O{sub 7-{delta}} (Ln = Dy, Ho, Yb; A = Ca, Mg, Zn; x = 0, 0.01, 0.02, 0.04, 0.07, 0.1), have been prepared at 1400-1600 deg. C using mechanical activation, co-precipitation and solid-state reactions. Acceptor doping in the lanthanide sublattice of Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Dy, Ho, Yb) with Ca{sup 2+}, Mg{sup 2+} and Zn{sup 2+} increases the conductivity of the titanates except in the (Ho{sub 1-x}Ca{sub x}){sub 2}Ti{sub 2}O{sub 7-{delta}} system, where the conductivity decreases slightly at low doping levels, x = 0.01-0.02. The highest conductivity in the (Ln{sub 1-x}A{sub x}){sub 2}Ti{sub 2}O{sub 7-{delta}} (Ln = Dy, Ho, Yb; A = Ca, Mg, Zn) systems is offered by the (Ln{sub 0.9}A{sub 0.1}){sub 2}Ti{sub 2}O{sub 7-{delta}} and attains maximum value for (Yb{sub 0.9}Ca{sub 0.1}){sub 2}Ti{sub 2}O{sub 6.9} and (Yb{sub 0.9}Mg{sub 0.1}){sub 2}Ti{sub 2}O{sub 6.9} solid solutions:{approx}2 x 10{sup -2} and 9 x 10{sup -3} S cm{sup -1} at 750 deg. C, respectively. Ca and Mg are best dopants for Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Dy, Ho, Yb) pyrochlores. Using impedance spectroscopy data, we have determined the activation energies for bulk and grain-boundary conduction in most of the (Ln{sub 1-x}A{sub x}){sub 2}Ti{sub 2}O{sub 7-{delta}} (Ln = Dy, Ho; A = Ca, Mg, Zn) materials. The values obtained, 0.7-1.05 and 1-1.4 eV, respectively, are typical of oxygen ion conductors. We have also evaluated defect formation energies in the systems studied.

36 MATERIALS SCIENCE↗

Novel red-emitting phosphor Ba3ZrNb4O15:Pr3+: The structure, characteristic photoluminescence property and thermal quenching behaviour investigation

Highlights: • Novel red emitting phosphors BZN:Pr{sup 3+} were successfully synthesized. • Phase purity, morphology and luminescent property of BZN:Pr{sup 3+} were studied. • Different concentration behavior and related mechanism were discussed. • Decay times and the fluorescence dynamics process were investigated. • Temperature sensitive thermal quenching behavior and mechanism was studied. - Abstract: Pr{sup 3+} activated niobate phosphors Ba{sub 3-x}ZrNb{sub 4}O{sub 15}:xPr{sup 3+} were firstly synthesized through high temperature solid-state method. The phase purity, crystal structure, morphology, luminescence property as well as thermal quenching behavior were carefully determined by using X-ray diffractometer, scanned electron microscope, photoluminescence and temperature dependent emission spectra, respectively. The luminescent property showed that Ba{sub 3-x}ZrNb{sub 4}O{sub 15}:xPr{sup 3+} (0.002 ≤ x ≤ 0.03) had dominate excitation around 451 nm and could exhibit red emissions peaking at 608, 618 and 651 nm, attributed to the {sup 1}D{sub 2}-{sup 3}H{sub 4}, {sup 3}P{sub 0}-{sup 3}H{sub 6} and P{sub 0}-{sup 3}F{sub 2} transitions of Pr{sup 3+} ions. The different concentration quenching behaviors were found while the related mechanism was investigated. The room temperature decay times and the related fluorescence dynamics process of Pr{sup 3+} ions in Ba{sub 3}ZrNb{sub 4}O{sub 15} were investigated. In addition, the optimal doping contents, CIE chromaticity coordinates as well as the color purity were determined. At last, the temperature sensitive emission quenching and decay behavior were discussed and the activation energy was calculated based on Arrhenius equation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metastable Phase Formation During the Reaction of Ni Films with Si(001): the Role of Texture Inheritance

The thermally induced solid-state reaction between a 10-nm-thick Ni film and a Si(001) substrate was investigated using in situ x-ray diffraction and ex situ pole figure analyses. The reaction begins with the appearance of orthorhombic Ni{sub 2}Si grains characterized by a strong fiber texture. The formation of the metastable hexagonal {theta} phase - which inherits the fiber texture of Ni{sub 2}Si - is then observed. This phase has been observed in every sample studied regardless of dopant, film thickness, deposition method, and anneal profile (>2000 conditions). Texture inheritance allows a reaction pathway with a lower activation energy than the expected formation through thermodynamically stable Ni silicide phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time-resolved observation of thermally activated rupture of a capillary-condensed water nanobridge

The capillary-condensed liquid bridge is one of the most ubiquitous forms of liquid in nature and contributes significantly to adhesion and friction of biological molecules as well as microscopic objects. Despite its important role in nanoscience and technology, the rupture process of the bridge is not well understood and needs more experimental works. Here, we report real-time observation of rupture of a capillary-condensed water nanobridge in ambient condition. During slow and stepwise stretch of the nanobridge, we measured the activation time for rupture, or the latency time required for the bridge breakup. By statistical analysis of the time-resolved distribution of activation time, we show that rupture is a thermally activated stochastic process and follows the Poisson statistics. In particular, from the Arrhenius law that the rupture rate satisfies, we estimate the position-dependent activation energies for the capillary-bridge rupture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetoresistivity in a tilted magnetic field in p-Si/SiGe/Si heterostructures with an anisotropic g-factor. Part II

The magnetoresistance components {rho}xx and {rho}xy are measured in two p-Si/SiGe/Si quantum wells that have an anisotropic g-factor in a tilted magnetic field as a function of the temperature, field, and tilt angle. Activation energy measurements demonstrate the existence of a ferromagnetic-paramagnetic (F-P) transition for the sample with the hole density p = 2 Multiplication-Sign 10{sup 11} cm{sup -2}. This transition is due to the crossing of the 0{up_arrow} and 1{down_arrow} Landau levels. However, in another sample with p = 7.2 Multiplication-Sign 10{sup 10} cm{sup -2}, the 0{up_arrow} and 1{down_arrow} Landau levels coincide for angles {theta} = 0-70 Degree-Sign . Only for {theta} > 70 Degree-Sign do the levels start to diverge which, in turn, results in the energy gap opening.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical, electrical, thermal properties of cadmium chloride doped PVA – PVP blend

Films of polyvinylalcohol (PVA) – polyvinylpyrrolidone (PVP) blend doped with Cadmium Chloride (CdCl{sub 2}) in the doping range 1 wt% to 40 wt% were prepared by solution casting technique. These films were characterized using optical/UV-Vis- NIR spectroscopy, Differential Scanning Calorimetry (DSC) and DC electrical measurements. The UV-Visible spectra were quantitatively analyzed to yield the optical parameters. The UV-Visible Spectra show intermediate absorption bands (before the final absorption edge) due to formation of energy bands in the forbidden gap of PVA-PVP. There is a prominent absorption band at 2.9 eV, from 0.5 wt% up to 1.8 wt% doping level (DL) caused by the dopant (CdCl{sub 2}). The DC electrical studies showed an increase in activation energy from 2.8 eV at 0.5 wt% DL up to 3.5 eV at 4.4 wt% DL, reaching a low of 2.4 eV at 11.2 wt% DL. DSC scans show evidence of formation of chain fragments, at doping levels beyond 8 wt%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetics of the sulfur oxidation on palladium: A combined in situ x-ray photoelectron spectroscopy and density-functional study

We studied the reaction kinetics of sulfur oxidation on the Pd(100) surface by in situ high resolution x-ray photoelectron spectroscopy and ab initio density functional calculations. Isothermal oxidation experiments were performed between 400 and 500 K for small amounts ({approx}0.02 ML) of preadsorbed sulfur, with oxygen in large excess. The main stable reaction intermediate found on the surface is SO{sub 4}, with SO{sub 2} and SO{sub 3} being only present in minor amounts. Density-functional calculations depict a reaction energy profile, which explains the sequential formation of SO{sub 2}, SO{sub 3}, and eventually SO{sub 4}, also highlighting that the in-plane formation of SO from S and O adatoms is the rate limiting step. From the experiments we determined the activation energy of the rate limiting step to be 85 {+-} 6 kJ mol{sup -1} by Arrhenius analysis, matching the calculated endothermicity of the SO formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of electrical properties and deep traps in p-Al{sub x}Ga{sub 1-x}N grown by molecular beam epitaxy and metal organic chemical vapor deposition

The electrical properties, admittance spectra, microcathodoluminescence, and deep trap spectra of p-AlGaN films with an Al mole fraction up to 45% grown by both metal organic chemical vapor deposition (MOCVD) and molecular beam epitaxy (MBE) were compared. The ionization energy of Mg increases from 0.15 to 0.17 eV in p-GaN to 0.3 eV in 45% Al p-AlGaN. In p-GaN films grown by MBE and MOCVD and in MOCVD grown p-AlGaN, we observed additional acceptors with a concentration an order lower than that of Mg acceptors, with a higher hole capture cross section and an ionization energy close to that of Mg. For some of the MBE grown p-AlGaN, we also detected the presence of additional acceptor centers, but in that case the centers were located near the p-AlGaN layer interface with the semi-insulating AlGaN buffer and showed activation energies considerably lower than those of Mg.

36 MATERIALS SCIENCE↗

Kinetics of lime/bentonite pozzolanic reactions at 20 and 50 °C: Batch tests and modeling

The effects of duration (1–100 days) and temperature (20 and 50 °C) were assessed from batch tests for Ca-bentonite mixed with 10 wt.% lime. The pozzolanic processes were monitored over time by {sup 29}Si NMR (Cement Concr. Res. 42, 2012), TGA-DTA, XRD and chemical analysis. Modeling considered kinetics and thermodynamics of mineralogical transformations and cation exchange. Kinetic laws were dependent on pH and temperature (Arrhenius energy). Lime hydration occurs within hours, modifying the bentonite exchangeable population and increasing the pH. These alkaline conditions initiate the pozzolanic reactions in a second stage. The rate-limiting step is the dissolution kinetics of the bentonite minerals, i.e. a relatively fast and total consumption of cristobalite in parallel to a long-term slower dissolution of montmorillonite. First C–S–H and then C–A–S–H are formed consequently. Temperature speeds up the pozzolanic reaction kinetics by a factor 5 from 20 to 50 °C, corresponding to an apparent activation energy of 40–50 kJ/mol.

36 MATERIALS SCIENCE↗

Characterization and oxidation states of Cu and Pd in PdCuO/ZnO/ZrO 2 catalysts for hydrogen production by methanol partial oxidation

Copper and zinc oxide based catalysts prepared by coprecipitation were promoted with palladium and ZrO 2 , and their activity and selectivity for methanol oxidative reforming was measured and characterized by N 2 O decomposition, X-ray absorption spectroscopy, BET, X-ray photoelectron spectroscopy, X-ray diffraction, and temperature programmed reduction. Addition of ZrO 2 increased copper dispersion and surface area, with little effect on activity, while palladium promotion significantly enhanced activity with little change of the catalytic structure. A catalyst promoted with both ZrO 2 and palladium yielded hydrogen below 150 C. EXAFS results under reaction conditions showed that the oxidation state of copper was influenced by palladium in the catalyst bulk. A palladium promoted catalyst contained 90% Cu 0 , while the copper in an unpromoted catalyst was 100% Cu 1+ at the same temperature. Palladium preferentially forms an unstable alloy with copper instead of zinc during reduction, which persists during reaction regardless of copper oxidation state. A 100-h time on stream activity measurement showed growth in copper crystallites and change in copper oxidation state resulting in decreasing activity and selectivity. A kinetic model of the reaction pathway showed that palladium and ZrO 2 promoters lower the activation energy of methanol combustion and steam reforming reactions.

08 HYDROGEN↗

Synthesis and characterization of the new uranium yttrium oxysulfide UY{sub 4}O{sub 3}S{sub 5}

Red needles of UY{sub 4}O{sub 3}S{sub 5} have been synthesized by the solid-state reaction at 1273 K of UOS and Y{sub 2}S{sub 3} with Sb{sub 2}S{sub 3} as a flux. UY{sub 4}O{sub 3}S{sub 5} adopts a three-dimensional structure that contains five crystallographically unique heavy-atom positions. U and Y atoms disorder on one eight-coordinate metal position bonded to four O atoms and four S atoms and two seven-coordinate metal positions bonded to three O atoms and four S atoms. Another eight-coordinate metal position with two O and six S atoms and one six-coordinate metal position with six S atoms are exclusively occupied by Y atoms. UY{sub 4}O{sub 3}S{sub 5} is a modified Curie-Weiss paramagnet between 1.8 and 300 K. Its effective magnetic moment is estimated to be 3.3(2) mu{sub B}. UY{sub 4}O{sub 3}S{sub 5} has a band gap of 1.95 eV. The electrical resistivity along the [010] direction of a single crystal shows Arrhenius-type thermal activation with an activation energy of 0.2 eV. - Graphical abstract: View of the crystal structure of UY4O3S5.

36 MATERIALS SCIENCE↗

Lithium stoichiometry of solid electrolytes based on tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}

Graphical abstract: - Highlights: • We prepared Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 6, 7, 8, 9, 10) by the citrate–nitrate method. • We studied phase composition and conductivity of Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x}. • We proposed a simple method to determine the carbonate impurity content in the solid electrolytes. • The synthesized solid electrolytes Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 7–9) have 1.32–3.49 wt.% Li{sub 2}CO{sub 3}. • The composition with x = 9 has high total conductivity, 7.5 × 10{sup −6} S cm{sup −1}, at room temperature. - Abstract: Samples of Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 6, 7, 8, 9, 10) were synthesized with the citrate–nitrate method. Neutron diffraction studies have shown the presence of lithium carbonate impurities in the synthesized compounds. We propose a simple and effective method to determine the carbonate impurity content in the solid electrolytes. The technique is based on the measurement of the carbon dioxide volume produced from the interaction of the investigated material with acid. Determined in this way, the content of Li{sub 2}CO{sub 3} in the synthesized electrolytes Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}, Li{sub 8}La{sub 3}Zr{sub 2}O{sub 12.5} and Li{sub 9}La{sub 3}Zr{sub 2}O{sub 13} are 1.32 ± 0.04, 1.95 ± 0.06 and 3.49 ± 0.10 wt.%, respectively. From the obtained data, the actual lithium content per formula unit of complex oxide was calculated for the synthesized compounds. The composition with x = 9 had the highest total conductivity, σ = 7.5 × 10{sup −6} S cm{sup −1}, at room temperature. All the investigated electrolytes have an activation energy of approximately 50 kJ mol{sup −1}.

36 MATERIALS SCIENCE↗

Support shape effect in metal oxide catalysis: ceria nanoshapes supported vanadia catalysts for oxidative dehydrogenation of iso-butane

The activation energy of VOx/CeO2 catalysts in oxidative dehydrogenation of iso-butane was found dependent on the shape of ceria support: rods < octahedra, closely related to the surface oxygen vacancy formation energy and defects amount of the two ceria supports with different crystallographic surface planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comprehensive diagram to grow InAlN alloys by plasma-assisted molecular beam epitaxy

Indium incorporation and surface morphology of InAlN layers grown on (0001) GaN by plasma-assisted molecular beam epitaxy were investigated as a function of the impinging In flux and the substrate temperature in the 450-610 deg. C range. In incorporation was found to decrease with substrate temperature due to thermal decomposition of the growing layer, while for a given temperature it increased with the impinging In flux until stoichiometry was reached at the growth front. The InN losses during growth followed an Arrhenius behavior characterized by an activation energy of 2.0 eV. A growth diagram highly instrumental to identify optimum growth conditions was established.

36 MATERIALS SCIENCE↗

Study of dielectric relaxation process in nanocomposite of Li{sub 2}O−SiO{sub 2} nanoglass-CuO nanoparticles

Dielectric behaviour of a nanocomposite consisting of 23Li{sub 2}O⋅77SiO{sub 2} nanoglass within the pores of compacted CuO nanoparticles was studied. Real and imaginary parts of dielectric permittivity of the material were measured over the temperature range 313 to 363 K. The results indicated a relaxation behaviour. The data were explained by a space charge polarization model developed in the case of a laminar conductor. The activation energy of the relaxation process was in close agreement with that of lithium ion conduction in the nanoglass.

36 MATERIALS SCIENCE↗

Phase separation and crystallization process of amorphous Fe{sub 78}B{sub 12}Si{sub 9}Ni{sub 1} alloy

The influence of the melt heat treatment on the structure and crystallization process of the rapidly quenched amorphous Fe{sub 78}B{sub 12}Si{sub 9}Ni{sub 1} alloys have been investigated by means of x-ray diffraction, DSC and TEM. Amorphous phase separation has been observed in the alloys quenched after the preliminary high temperature heat treatment of the liquid alloy (heating above 1400°C). Comparative analysis of the pair distribution functions demonstrates that this phase separation accompanied by a changes in the local atomic arrangement. It has been found that crystallization process at heating is strongly dependent on the initial amorphous phase structure - homogeneous or phase separated. In the last case crystallization goes through the formation of a new metastable hexagonal phase [a=12.2849(9) Ǻ, c=7.6657(8) Ǻ]. At the same time the activation energy for crystallization (Ea) reduces from 555 to 475 kJ mole{sup −1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗