SEARCH · Engineering Papers
Results for “valorization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Photochemical Diodes for Simultaneous Bias-Free Glycerol Valorization and Hydrogen Evolution
Artificial photosynthesis offers a route to producing clean fuel energy. However, the large thermodynamic requirement for water splitting along with the corresponding sluggish kinetics for the oxygen evolution reaction (OER) limits its current practical application. Here, we offer an alternative approach by replacing the OER with the glycerol oxidation reaction (GOR) for value-added chemicals. By using a Si photoanode, a low GOR onset potential of -0.05 V vs RHE and a photocurrent density of 10 mA/cm 2 at 0.5 V vs RHE can be reached. Coupled with a Si nanowire photocathode for the hydrogen evolution reaction (HER), the integrated system yields a high photocurrent density of 6 mA/cm 2 with no applied bias under 1 sun illumination and can run for over 4 days under diurnal illumination. In conclusion, the demonstration of the GOR-HER integrated system provides a framework for designing bias-free photoelectrochemical devices at appreciable currents and establishes a facile approach to artificial photosynthesis.
The challenges of electrolytic valorization of carbon dioxide
Electroreduction of carbon dioxide is an enabling technology that can produce valuable chemicals, such as C 1 (for example, formic acid and carbon monoxide) and C 2 chemicals (for example, ethylene and ethanol), with a minimal or even negative carbon footprint. Now, a techno-economic analysis shows that only the C 1 products can achieve competitive prices, while substantial improvements in process economics are needed for C 2 .
Linear paired electrochemical valorization of glycerol enabled by the electro-Fenton process using a
Explore the source record for details and available documents.
A red-light-powered silicon nanowire biophotochemical diode for simultaneous CO 2 reduction and glycerol valorization
A bias-free photochemical diode, in which a p-type photocathode is connected to an n-type photoanode to harness light for driving photoelectrochemical reduction and oxidation pairs, serves as a platform for realizing light-driven fuel generation from CO 2 . However, the conventional design, in which cathodic CO 2 reduction is coupled with the anodic oxygen evolution reaction (OER), requires substantial energy input. Here we present a photochemical diode device that harnesses red light (740 nm) to simultaneously drive biophotocathodic CO 2 -to-multicarbon conversion and photoanodic glycerol oxidation as an alternative to the OER to overcome the above thermodynamic limitation. The device consists of an efficient CO 2 -fixing microorganism, Sporomusa ovata, interfaced with a silicon nanowire photocathode and a Pt–Au-loaded silicon nanowire photoanode. This photochemical diode operates bias-free under low-intensity (20 mW cm –2 ) red light irradiation with ~80% Faradaic efficiency for both the cathodic and anodic products. Finally, this work provides an alternative photosynthetic route to mitigate excessive CO 2 emissions and efficiently generate value-added chemicals from CO 2 and glycerol.
Exogenous electricity flowing through cyanobacterial photosystem I drives CO 2 valorization with high energy efficiency
Nature's biocatalytic processes are driven by photosynthesis, whereby photosystems I and II are connected in series for light-stimulated generation of fuel products or electricity. Externally supplying electricity directly to the photosynthetic electron transfer chain (PETC) has numerous potential benefits, although strategies for achieving this goal have remained elusive. Here we report an integrated photo-electrochemical architecture which shuttles electrons directly to PETC in living cyanobacteria. The cathode of this architecture electrochemically interfaces with cyanobacterial cells that have a lack of photosystem II activity and cannot perform photosynthesis independently. Illumination of the cathode channels electrons from an external circuit to intracellular PETC through photosystem I, ultimately fueling cyanobacterial conversion of CO 2 into acetate. We observed acetate formation when supplying both illumination and exogenous electrons under intermittent conditions (e.g., in a 30 s supply plus 30 min interval condition of both light and exogenous electrons). The energy conversion efficiency for acetate production under programmed intermittent LED illumination (400–700 nm) and exogenous electron supply reached ca. 9%, when taking into account the number of photons and electrons received by the biotic system, and ca. 3% for total photons and electrons supplied to the cyanobacteria. This approach is applicable for generating various CO 2 reduction products by using engineered cyanobacteria, one of which has enabled electrophototrophic production of ethylene, a broadly used hydrocarbon in the chemical industry. The resulting bio-electrochemical hybrid has the potential to produce fuel chemicals with numerous potential advantages over standalone natural and artificial photosynthetic approaches.
Metabolic Modification of Sphingobium lignivorans SYK-6 for Lignin Valorization Through the Discovery of an Unusual Transcriptional Repressor of Lignin-Derived Dimer Catabolism
Sphingobium lignivorans SYK-6 catabolizes guaiacylglycerol-..beta..-guaiacyl ether (GGE, a ..beta..-O-4-type dimer) and 1,2-diguaiacylpropane-1,3-diol (DGPD, a ..beta..-1-type dimer) derived from lignin. Recently, SLG_35860 containing TetR- and MarR-type transcriptional regulator motifs was suggested to be involved in the regulation of GGE and DGPD catabolism. Here we investigated the role of SLG_35860 in the transcriptional regulation of GGE and DGPD catabolism genes. SLG_35860 designated ligS repressed 11 genes involved in GGE and DGPD catabolism. LigS binds directly to specific sequences in the promoter region of each gene. The MarR domain was shown to be involved in these bindings; however, GGE, DGPD, and their metabolites did not function as effectors of LigS. We discovered unidentified compound(s) in the black liquor of oxygen-soda anthraquinone pulping of Japanese cedar that SYK-6 cannot metabolize and that acted as effector(s). Therefore, LigS constantly represses the transcription of the GGE and DGPD catabolism genes to low levels. Based on these findings, we examined the productivity of a polymer building block, 2-pyrone-4,6-dicarboxylic acid (PDC), from GGE, DGPD, and a GGE metabolite using an engineered ligS mutant. The rates of PDC production from each compound by this strain were 1.5-6.0 times higher than those of a PDC-producing strain carrying ligS.
Lignin-based vitrimers: valorization and utilization of lignin in high-value applications
We review recent advances in the utilization of lignin as a viable alternative to fossil-based feedstock in the synthesis of a wide range of vitrimeric materials targeted towards the achievement of a sustainable and circular economy.
Direct flue gas capture for algae cultivation and subsequent valorization: evaluating life cycle emissions and costs
Algae cultivation and processing is an important pathway under discussion within the broader CO 2 capture and utilization umbrella. Here, we discuss the results of a life-cycle analysis and techno-economic analysis of a pilot-scale photobioreactor that uses flue gas directly from natural gas or biogas combustion at 3–5% CO 2 concentration. The system requires minimal freshwater use as it has been successfully run with industrial wastewater and has a much smaller areal footprint compared with open pond cultivation. Introducing the flue gas directly to the photobioreactor avoids the need for CO 2 separation and pressurization, which is undertaken in many other algae cultivation systems. For the end-use of the biomass, the default case assumes conversion of algae to liquid fuels via hydrothermal liquefaction. The results indicate that the pilot-scale system has a higher cost, and comparable greenhouse gas emissions compared to pond-based systems, especially as the grid is anticipated to evolve to a lower carbon intensity. The costs of algae biofuel production range from $\$12–16$ per GGE at the current pilot scale. Depending on whether the source of the carbon is fossil or biogenic, the net emissions are 68 g CO 2 e per MJ and −4 g CO 2 e per MJ respectively. If the marine algae species is used instead of the freshwater species, it offers an additional 16 g CO 2 e per MJ carbon fixation in the form of calcium carbonate. The findings point to broadly desirable trends in GHG emissions and costs, while the discussion aims to shed light on areas that could further improve the scalability of the system.
El valor de los metadatos para las estaciones de recuperación de recursos del agua
Spanish: Los metadatos hacen referencia a información descriptiva (como ubicación del sensor, unidad de medida, rango de medida, fecha de calibración, fecha de limpieza, si ocurrió algún evento como episodio de lluvia/fallo operativo/vertido tóxico . . .) que es esencial para convertir los grandes volúmenes de datos que se recogen actualmente en las instalaciones de tratamiento de agua y que están sin procesar en información y recursos útiles. Con el avance de la digitalización en el sector del agua, es fundamental evitar los cementerios de datos y, por otro lado, utilizar los datos almacenados para resolver problemas actuales y futuros. Este artículo se centra en el papel crucial que tienen los metadatos para responder a desafíos futuros y posiblemente impredecibles. El objetivo de este documento es presentar el ‘reto de los metadatos’ y destacar la necesidad de tener en cuenta los metadatos cuando se recoge información como parte de las buenas prácticas de digitalización. English: Metadata refers to descriptive information (such as sensor location, measurement unit, measurement range, calibration date, cleaning date, if any event occurred such as rain event/operating failure/toxic spill, . . .) essential to convert large volumes of raw data that are currently collected at water treatment facilities into useful information and resources. With the advance of digitalization in the water sector, it is fundamental to avoid data graveyards and, on the other hand, using collected data to address current and future problems. This paper focuses on the crucial role that metadata has in responding to future and possibly unpredictable challenges. The aim of this document is to present the ‘metadata challenge’ and to highlight the need to consider metadata when collecting information as part of good digitalization practices.
Integrated Biorefinery for Valorization of Engineered Bioenergy Crops—A Review
Biorefinery allows production of multiple bioproducts from various biomass and streams using suitable unit operations to improve the economics of process while minimizing waste generation. Biorefinery holds importance in the biofuel industry because multiple coproducts can allow to produce biofuels at a price which is competitive of fossil fuels. Newer generations of cellulosic biomasses are being developed to accumulate lipids and pigments. Such crops, which can be cultivated on land unsuitable for row crops, are aimed to provide drop-in fuels to reduce dependency on fossil fuels and food crops. This review describes the potential of recovery and value addition to different constituents of engineered crops besides producing drop-in fuels. As a result, the work also provides the market value of different products which can be obtained from engineered crops to make an informed decision.
Current trends in waste valorization
This paper presents the scientific breakthroughs made in bioprocess engineering and microbial biotechnology for the conversion of wastes into products with added value and/or biofuels. The significant results obtained in the emerging fields of hybrid electrosynthesis, the role of enzymes in the degradation of plastics, polyhydroxyalkanoate and 5-aminolevulinic acid production, fermentation technology and the application of molecular engineering tools to bioprocess technology are highlighted.
Mixed Plastics Waste Valorization through Tandem Chemical Oxidation and Biological Funneling
Mixed plastics waste represents an abundant and largely untapped feedstock for the production of valuable products. The chemical diversity and complexity of these materials, however, present major barriers to realizing this opportunity. In this work, we show that metal-catalyzed autoxidation depolymerizes comingled polymers into a mixture of oxygenated small molecules that are advantaged substrates for biological conversion. We engineer a robust soil bacterium, Pseudomonas putida, to funnel these oxygenated compounds into a single exemplary chemical product, either ..beta..-ketoadipate or polyhydroxyalkanoates. This hybrid process establishes a strategy for the selective conversion of mixed plastics waste into useful chemical products.
Data for Hydrothermal Pretreatment for Valorization of Genetically Engineered Bioenergy Crop for Lipid and Cellulosic Sugar Recovery
Lipids accumulated in the vegetative tissues of cellulosic feedstocks can be a potential raw material for biodiesel and bioethanol production. In this work, bagasse of genetically engineered sorghum was subjected to liquid hot-water pretreatment at 170, 180, and 190 °C for different reaction time. Under the optimal pretreatment condition (170 °C, 20 min), the residue was enriched in glucan (57.39 ± 2.63 % w/w) and xylan (13.38 ± 0.49 % w/w). The total lipid content of the pretreated residue was 6.81% w/w, similar to that observed in untreated bagasse (6.30% w/w). Pretreatment improved the enzymatic digestibility of bagasse, allowing a recovery of 79% w/w and 86% w/w of glucose and xylose, respectively. The pretreatment and enzymatic saccharification resulted in a 2-fold increase in total lipid in enzymatic residue compared to the original bagasse. Thus, pretreatment and enzymatic hydrolysis enabled high sugar recovery while concentrating triglycerides and free fatty acids in the residue.
Data for Valorization of Miscanthus x giganteus for Sustainable Recovery of Anthocyanins and Enhanced Production of Sugars
The increased awareness for eco-friendliness and sustainability has shifted the interest of stakeholders from synthetic colors to natural plant-based pigments. In this study, purple stemmed Miscanthus x giganteus was evaluated as a source of anthocyanins. Hydrothermal pretreatment was studied as a green, chemical-free process for recovering maximum anthocyanins in the pretreatment liquor. The highest recovery of 94.3 ± 1.5% w/w of the total anthocyanin concentration was obtained for a temperature and time combination of 170 °C and 10 min. The pretreatment also improved the enzymatic digestibility of the biomass and led to a 2.1-fold increase in the overall recovery of glucose (70.6 ± 0.5% w/w) at the end of 72 h. The sugar monomers obtained after the enzymatic hydrolysis of the pretreated biomass could be used for the production of biofuels or biochemicals in an integrated biorefinery based on purple-stemmed miscanthus. Overall, this study demonstrates that the clean pretreatment method developed could lead to an additional product stream (rich in anthocyanins) along with its effect in reducing the recalcitrance of miscanthus biomass.
Sterile Neutrino Oscillation Searches using VALOR at SBN
Explore the source record for details and available documents.