Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Griffin Capability Improvements in Support of Ex-core Deep-Penetration Problems

Advanced reactor designs, especially portable reactors that are designed to be located closer to humans and operate autonomously, require the ability to accurately compute the ex-core neutron and gamma flux solutions in terms of shielding design optimization to reduce dose rates at the vessel boundary and detector signal prediction to drive the reactor control system. The Nuclear Energy Advanced Modeling and Simulation program has prioritized improvements to the Griffin discrete ordinates (SN) solver for deep-penetration problems in fiscal year 2025. Significant advancements have been made to the Griffin methodologies for solving ex-core deep-penetration problems for steady-state, fixed-source and transient calculations. This work presents the methodology improvements as well as a comprehensive demonstration with a Transient Test Reactor model and measurements.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Two-layer transient heat transfer using impulse response methods

Solutions to the inverse heat conduction problem (IHCP) are methods that can be used to quantify surface heat flux in multi-layer materials for components in which there are limited subsurface (internal) temperature measurements, such as coated components. A critical consideration is to capture high frequency fluctuations using a practical heat flux sensor. To that end, this paper highlights key parameters for calculating accurate surface heat transfer. Specifically, this research extends the available solutions to the IHCP for multi-substrate structures through an impulse response methodology. The sensitivity of the impulse method was quantified with respect to practical measurements. Further, when compared to the inverse case, the impulse method resulted in lower errors when calculating surface heat flux over a range of conditions. Overall, this work provides a foundation for deducing heat flux from a subsurface heat flux sensor while maintaining a high-frequency response.

42 ENGINEERING↗
DOE OSTI2022

Quantifying the impact of temporal analysis of products reactor initial state uncertainties on kinetic parameters

The temporal analysis of products (TAP) reactor, a transient kinetic tool, provides users with information as the catalyst state evolves. However, the state of the art for TAP uncertainty quantification only considers the experimental noise present in the outlet flow signal. Additional sources of uncertainty, including, but not limited to, initial surface coverages, the catalyst zone location, the inert void fraction, and the gas pulse intensity and pulse delay, are not included. For this reason, a framework for quantifying all uncertainty sources present in TAP experiments is presented and applied to a carbon monoxide oxidation case study. Herein, two methods for quantifying these sources of uncertainty are introduced. The first utilizes initial state sensitivities to approximate the parameter variances, as well as to provide insights into the structural certainty of the model. The second generates parameter confidence distributions through an ensemble-based sampling algorithm. This initial state covariance matrix can ultimately be merged with the experimental noise covariance matrix, providing a unified description of the parameter uncertainties for a single TAP experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Survey of Dynamic Mode Decomposition Methods

Dynamic mode decomposition (DMD) is a data-driven reduced order modeling (ROM) technique used for dynamic systems. The widely adopted algorithm was first introduced and demonstrated on fluid flow data by Schmid. In recent years, various other fields, such as nuclear engineering, have begun to adopt this method. For example, DMD has been used for estimating α-eigenvalues, as an ROM for pulsed neutron problems, for predicting isotopic composition in burnup calculations, as acceleration techniques for iterative methods, and in capturing dynamic behaviors in molten salt reactor transients. This report seeks to demonstrate the capabilities and limits of the standard DMD algorithm, and identify problem spaces where variants may be better suited. The primary variant this report considers is Multi-Resolution DMD (mrDMD). Because this serves as a survey, synthetically produced data is used in lieu of simulation results. The remainder of this report will go into detail on the DMD theory, outline the standard DMD and mrDMD algorithms, present test cases highlighting the applicability of each, and finally present a discussion on how to determine the best suited algorithm for a given problem. All calculations performed in this report are carried out using the open source DMD library, PyDMD.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Studies of the influence of heat pipe model and coupling strategy in heat pipe microreactor simulations using Sockeye

This work demonstrates various modeling approaches for thermally coupling heat pipes to a graphite monolithic block in a microreactor context, accounting for the presence of a gap. We show that heat pipe model selection has a significant impact on the transient behavior of a three-dimensional coupled microreactor assembly problem by comparing results obtained using different heat pipe models from the heat pipe code Sockeye. Additionally, we show that the choice of coupling strategy has significant consequences for both accuracy and performance. Furthermore, we found that our heat flux transfer strategy exhibited greater accuracy than our temperature transfer strategy, even when comparing a loose coupling of the heat flux transfer strategy to a tight coupling of the temperature transfer strategy. Although this research uses only theoretical test problems, it provides important insights in modeling thermal fluids phenomena in heat pipe microreactors.

Direwolf↗
DOE OSTI2022

Network Uncertainty Quantification for Analysis of Multi-Component Systems

To impact physical mechanical system design decisions and realize the full promise of high-fidelity computational tools, simulation results must be integrated at the earliest stages of the design process. This is particularly challenging when dealing with uncertainty and optimizing for system-level performance metrics, as full-system models (often notoriously expensive and time-consuming to develop) are generally required to propagate uncertainties to system-level quantities of interest. Methods for propagating parameter and boundary condition uncertainty in networks of interconnected components hold promise for enabling design under uncertainty in real-world applications. These methods avoid the need for time consuming mesh generation of full-system geometries when changes are made to components or subassemblies. Additionally, they explicitly tie full-system model predictions to component/subassembly validation data which is valuable for qualification. These methods work by leveraging the fact that many engineered systems are inherently modular, being comprised of a hierarchy of components and subassemblies that are individually modified or replaced to define new system designs. By doing so, these methods enable rapid model development and the incorporation of uncertainty quantification earlier in the design process. The resulting formulation of the uncertainty propagation problem is iterative. We express the system model as a network of interconnected component models, which exchange solution information at component boundaries. We present a pair of approaches for propagating uncertainty in this type of decomposed system and provide implementations in the form of an open-source software library. We demonstrate these tools on a variety of applications and demonstrate the impact of problem-specific details on the performance and accuracy of the resulting UQ analysis. This work represents the most comprehensive investigation of these network uncertainty propagation methods to date.

42 ENGINEERING↗
DOE OSTI2026

Overview of IMPACT Data Acquisition System and Data Reduction Process

This report documents the development of the data acquisition system (DAS) and data reduction methodologies for the Irradiated Material Property Accelerated Characterization Test (IMPACT) experiment at the Advanced Test Reactor (ATR). The IMPACT experiment is designed to enable in-pile measurement of thermal conductivity in metallic nuclear fuels, specifically U-10Zr, using an instrumented thermal conductivity probe. The DAS supports both passive temperature monitoring and active thermal interrogation of the probe through controlled AC and DC excitation. Significant modifications to laboratory-scale systems were required to accommodate the higher resistance paths associated with the in-pile application. Custom electronics and relay-controlled measurement sequencing were developed to enable the measurement and sufficient power delivery to the sensing region. A reduced-order, axisymmetric thermal model based on the thermal quadrupoles method is presented to support data interpretation. This model enables efficient evaluation of transient heat transfer behavior and facilitates solution of the inverse problem required to extract thermal properties from measured signals. Multiple boundary condition formulations are discussed to address varying experimental time scales and geometries. Additionally, machine learning techniques are introduced to support data reduction and improve confidence in inverse solutions. Convolutional neural networks are applied to identify the presence of gas gaps and other evolving geometric features that significantly impact thermal response during irradiation. These efforts contribute to the broader integration of digital twin frameworks and real-time modeling capabilities within the Advanced Fuels Campaign.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2020

Transient Safety Filter Design for Grid-Forming Inverters

Unlike conventional generators, inverter-based generation are fundamentally incapable of providing rotational inertia. While grid-forming inverters alleviate some of that problem by synthesizing small inertia via feedback control, additional control mechanisms are needed to ensure safety and security during transients. In this paper, we propose novel real-time safety-constrained feedback controllers (``safety filters'') for droop-based (grid-forming) inverters to ensure transient security of the grid. The safety filter acts as a buffer between the network operational layer and the inverter-control layer, and only lets those dispatch control signals pass to the inverter droop-controller, which are guaranteed to not violate the safety specifications (frequency, voltage, current limits). Using a distributed barrier certificates method, we construct sector-like conditions on the control policies, which guarantee the satisfaction of transient safety specifications. Sum-of-square programming is used to synthesize the safety filters. Numerical simulation results are provided to illustrate the performance of the proposed filter on inverter-based microgrids.

Kundu, Soumya↗
DOE OSTI2025

Subspace-Driven Learning for Anomaly Detection in Process Transients

Nuclear power plant (NPP) monitoring and diagnostic centers are actively investigating and implementing automated anomaly detection algorithms to help plants catch anomalies sooner, thereby preventing or reducing the duration of unexpected shutdowns. Current machine learning-based anomaly detection methods are expected to be highly effective during stable, full-power operations because NPPs typically operate as baseload power generators, meaning there are extensive operating data available from plant equipment. However, it is expected that anomaly detection methods will face significant challenges during transient conditions (i.e., when power output falls below full power) because plants only occasionally operate at these lower power levels, generating sparse transient operational data, and resulting in false alarms or missed detections. Here, to address this issue, transfer learning is used, which for this problem leverages knowledge (in the form of learned features) from stable, full-power operations to improve detection accuracy during transient conditions, even with limited data. In this effort, a novel subspace approach is developed to transfer a subset of the data features from full power operation to transients. This approach is validated through experiments using synthetic data and was found to outperform two baseline transfer learning approaches in anomaly detection performance across a range of amounts of transient data used in the training process.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2020

Verification of an improved equation-free projective integration method for neoclassical plasma-profile evolution in tokamak geometry

A brute-force, long-time gyrokinetic simulation of plasma profile evolution in magnetic fusion devices is not desirable due to large computational resource requirements and a possible accumulation of numerical error. The equation-free projective integration method of Keverekidis et al. [Commun. Math. Sci. 1(4), 715–762 (2003)] is one of the outstanding candidates in projecting micro-scale simulations to a longer timescale. However, its application to tokamak plasma has not been fruitful due to the appearance of spurious transient oscillations in the lifting process, which are present when the kinetic simulations are initialized with a simplified model distribution function and which make the kinetic simulations to deviate from the desired paths. In this work, a kinetically informed lifting algorithm is added to the equation-free projective integration method, which is then verified in the electrostatic gyrokinetic particle-in-cell code XGCa [R. Hager and C. S. Chang, Phys. Plasmas 23, 042503 (2016)] for a neoclassical ion heat transport problem with adiabatic electrons. This new lifting operator is demonstrated to control spurious transients, enabling an over four-times reduction in the overall computing time in the time-evolution of the ion temperature profile in an axisymmetric toroidal plasma. Further reduction in the computing time is found to be limited due to the stability properties of the linear least squares projective integrator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Transient flow modeling in fractured media using graphs

In this work, we describe a method to simulate transient fluid flows in fractured media using an approach based on graph theory. Our approach builds on past work where the graph-based approach was successfully used to simulate steady-state fluid flows in fractured media. We find a mean computational speedup of the order of 1400 from an ensemble of a 100 discrete fracture networks in contrast to the O(10 4 ) speedup that was obtained for steady-state flows earlier. However, the transient flows considered here involve an additional degree of complexity that was not present in the steady-state flows considered previously with a graph-based approach, that of time marching and solution of the flow equations within a time-stepping scheme. We verify our method with an analytical test case and demonstrate its use on a practical problem related to fluid flows in hydraulically fractured reservoirs. By enabling the study of transient flows, we create an opportunity for a wide set of possibilities where a steady-state approximation is not sufficient, such as the example motivated by hydraulic fracturing that we present here. This work validates the concept that graphs are able to reliably capture the topological properties of the fracture network and serve as effective surrogates in an uncertainty-quantification framework.

58 GEOSCIENCES↗
DOE OSTI2022

Identifying Transient Candidates in the Dark Energy Survey Using Convolutional Neural Networks

The ability to discover new transient candidates via image differencing without direct human intervention is an important task in observational astronomy. For these kind of image classification problems, machine learning techniques such as Convolutional Neural Networks (CNNs) have shown remarkable success. In this work, we present the results of an automated transient candidate identification on images with CNNs for an extant data set from the Dark Energy Survey Supernova program, whose main focus was on using Type Ia supernovae for cosmology. By performing an architecture search of CNNs, we identify networks that efficiently select non-artifacts (e.g., supernovae, variable stars, AGN, etc.) from artifacts (image defects, mis-subtractions, etc.), achieving the efficiency of previous work performed with random Forests, without the need to expend any effort in feature identification. The CNNs also help us identify a subset of mislabeled images. Performing a relabeling of the images in this subset, the resulting classification with CNNs is significantly better than previous results, lowering the false positive rate by 27% at a fixed missed detection rate of 0.05.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Classification and computation of extreme events in turbulent combustion

In the design of practical combustion systems, ensuring safety and reliability is an important requirement. For instance, reliably avoiding lean blowout, flame flashback or inlet unstart is critical for ensuring safe operation. Currently, the science of predicting such events is based on prior experience, limited modeling or diagnostic tools and purely statistical approaches. Even though computational and experimental tools for studying combustion devices have vastly advanced in the last three decades, the analysis of such failure events has not been pursued widely. While the use of data for model development and calibration is being widely accepted, the extension to failure events introduces numerous challenges. In particular, the focus here is on so-called data-poor problems, where the cost of generating data is extremely high and is not easily amenable to existing computational and experimental approaches. Data-poor problems are particularly relevant when related to extreme events (also called anomalous events) that can lead to catastrophic failure of the system. It is argued that transient events that describe such failure can have different causal mechanisms. To develop the scientific inference process, a classification of such problems is used to determine specific modeling paths as well as computational tools needed. Research opportunities in the emerging field of extreme event prediction are highlighted in order to identify critical and immediate needs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Sparse Control Synthesis for Uncertain Responsive Loads With Stochastic Stability Guarantees

In this report, recent studies have demonstrated the potential of flexible loads in providing frequency response services, predominantly due to their availability and cost-effectiveness. However, uncertainty and variability in various weather-related and end-use behavioral factors often impact the reliability of demand-side control performance. This work addresses this problem with the design of a demand-side control to achieve frequency response under load uncertainties. Our approach involves modeling the load uncertainties via stochastic processes that appear as both multiplicative and additive in the power system dynamics. Recently developed mean square exponential stability (MSES) results for continuous-time linear stochastic systems are applied to pose the control synthesis problem which results in an LMI-based optimization problem. Additional costs and constraints are added to the LMI-based controller synthesis to ensure MSES, improve closed-loop transient performance, maximize tolerable uncertainties, and promote sparsity in the controller. Additionally, the fundamental limitations between the tolerable uncertainties and control efforts while ensuring MSES are discussed. Further, the control synthesis problem for the case of the full-state measurement is generalized to the case of partial-state measurements. The proposed control synthesis is illustrated on an IEEE 39 bus system with rigorous studies to demonstrate the role of sparsity, closed-loop transient performance, tolerable uncertainties, and control efforts while ensuring MSES and achieving frequency response.

42 ENGINEERING↗
DOE OSTI2022

SAM-ML: Integrating data-driven closure with nuclear system code SAM for improved modeling capability

Advanced reactors often involve complicated thermal-fluid (T-F) phenomena. Modeling such phenomena with the traditional one-dimensional (1-D) system code is a challenging task. The System Analysis Module (SAM), a modern nuclear system code, has developed a coarse mesh multi-dimensional (multi-D) flow model to capture the spatial effect of T-F phenomena in advanced reactors. As a coarse mesh solver, constitutive relations are required for SAM's multi-D model for unresolved fine-scale physics, such as turbulence. Here this work presents a novel approach that integrates neural networks as data-driven closure for SAM's multi-D flow model. The data-driven closure is trained with fine-resolution data to ensure its accuracy while maintaining a coarse mesh setup to ensure its efficiency and consistency with SAM. We demonstrate the applicability of this SAM-ML capability in an open volume thermal stratification problem, where a neural network model serves as the eddy viscosity closure. A customized interface between the neural network and SAM is developed to ensure flexible and efficient data exchange. The SAM-ML results demonstrate superior performance compared to SAM's built-in zero-equation eddy viscosity closure. The case study shows that although the generalization capability of the data-driven closure still needs to be improved for different transient case or different geometric setup, SAM -ML demonstrates good potential for challenging simulation problems with improved accuracy and computational efficiency.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Potential design problems for ITER fusion device

The international thermonuclear experimental reactor (ITER) is a worldwide project currently being built in France for the demonstration of the feasibility of thermonuclear technologies for future realization of successful commercial fusion energy. ITER is of the tokamak based design using strong magnetic fields to confine the very hot plasma needed to induce the fusion reaction. Tokamak devices are currently the front leading designs. Building a successful magnetic fusion device for energy production is of great challenge. A key obstacle to such design is the performance during abnormal events including plasma disruptions and so-called edge-localized modes (ELMs). In these events, a massive and sudden release of energy occurs quickly, due to loss of full or partial plasma confinement, leading to very high transient power loads on the reactor surface boundaries. A successful reactor design should tolerate several of these transient events without serious damages such as melting and vaporization of the structure. This paper highlights, through comprehensive state-of-the-art computer simulation of the entire ITER interior design during such transient events, e.g., ELMs occurring at normal operation and disruptions during abnormal operation, potential serious problems with current plasma facing components (PFCs) design. The HEIGHTS computer package is used in these simulations. The ITER reactor design was simulated in full and exact 3D geometry including all known relevant physical processes involved during these transient events. The current ITER divertor design may not work properly and may requires significant modifications or new innovative design to prevent serious damage and to ensure successful operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Benchmarking magnetised three-wave coupling for laser backscattering: analytic solutions and kinetic simulations

Understanding magnetised laser–plasma interactions is important for controlling magneto-inertial fusion experiments and developing magnetically assisted radiation and particle sources. For nanosecond pulses at non-relativistic intensities, interactions are dominated by coherent three-wave interactions, whose nonlinear coupling coefficients became known only recently when waves propagate at oblique angles with the magnetic field. In this paper, backscattering coupling coefficients predicted by warm-fluid theory are benchmarked using particle-in-cell simulations in one spatial dimension, and excellent agreements are found for a wide range of plasma temperatures, magnetic field strengths and laser propagation angles, when the interactions are mediated by electron-dominant hybrid waves. Systematic comparisons between theory and simulations are made possible by a rigorous protocol. On the theory side, the initial boundary value problem of linearised three-wave equations is solved, and the transient-time solutions allow the effects of growth and damping to be distinguished. On the simulation side, parameters are carefully chosen and calibration runs are performed to ensure that comparisons are well controlled. Fitting simulation data to analytical solutions yields numerical growth rates that match theory predictions within error bars. Although warm-fluid theory is found to be valid for a wide parameter range, genuine kinetic effects have also been observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Design of Experiments for Dynamic Test Runs in Solvent-Based CO 2 Capture Pilot Plants

Test runs in the pilot plants consume significant resources, and therefore, the learning from test runs should be maximized. Test runs conducted in the pilot plants are often steady state. It takes several hours for reaching steady-state in the pilot plants, and thus, the duration of the test runs needs to be long even for collecting few steady-state data points. On the other hand, a large number of measurements can be collected through dynamic test runs in a short span of time. This paper presents a systematic design of dynamic experiments (DoDEs) for identifiability of model parameters, which is achieved by persistently exciting the inputs signals. A pseudorandom binary sequence (PRBS) is designed as the input signal for DoDE due to its efficiency in obtaining sufficient spectral content. However, due to the long sequence size of the PRBS signal, a Schroeder-phase input signal, which is a multisine signal, is also designed. Tests for both types of signals are run in the Pilot Solvent Test Unit (PSTU) at the National Carbon Capture Center in Wilsonville, Alabama. The transient data are used to solve dynamic data reconciliation and parameter estimation problem. The estimated parameters are found to be not only superior to those estimated from using data collected from hundreds of steady-state test runs in a nonreactive (air–water) system, but the parameters could be estimated by using the dynamic data collected for about 24 h from the pilot plant for the MEA-H 2 O–CO 2 system.

CO2 capture↗