SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
New shapes for tips of Pitot probes proposed to enable measurement of time-averaged streamwise momentum densities and time-averaged intensities of cross-stream turbulence in subsonic flows. Shapes tailored to yield specific directional responses. Directional response calculated from potential-flow theory by suitable computer programs. Calculations iterated until response approaches desired response.
Several comparisons of computational fluid dynamics to wind tunnel test data are shown for the purpose of code validation. The wind tunnel test, 05-CA, uses a 7.66% model of NASA's Multi-Purpose Crew Vehicle in the 11-foot test section of the Ames Unitary Plan Wind tunnel. A variety of freestream conditions over four Mach numbers and three angles of attack are considered. Test data comparisons include time-averaged integrated forces and moments, time-averaged static pressure ports on the surface, and Strouhal Number. The applicability of the US3D code to subsonic and transonic flow over a bluff body is assessed on a comprehensive data set. With close comparison, this work validates US3D for highly separated flows similar to those examined here.
Intrinsic persistent emission from galactic bulge X-ray sources and the ratio of the average persistent X-ray luminosity to the time-averaged burst luminosity associated with Type I burst sources are discussed in the light of the thermonuclear flash model of X-ray burst emission. Values of the ratio between average persistent luminosity and time-averaged burst luminosity for a large collection of SAS 3 sources are presented to confirm the predictions of the burst model of thermonuclear flashes in freshly accreted matter on a neutron star. The model also predicts a critical value of the persistent accretion rate, below which bursts can occur. It is suggested that the galactic bulge X-ray sources represent neutron stars undergoing accretion, with burst sources accounting for a subset in which the accretion rate is below the critical value.
This presentation shows the average warning and corrective alert times supported by the ATAR classes A1, A2, and A3
Atmospheric processes over the Southern Ocean have a profound influence on regional and global climate. This is a part of the world where global climate models perform particularly poorly, with models persistently overpredicting the amount of sunlight reaching the Earth's surface (Regayre et al. 2020). A major challenge when trying to improve the representation of atmospheric processes in this part of the globe is the scarcity of observations capable of constraining our understanding. During 2024/25 a U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility field campaign (CAPE-k) deployed a suite of instrumentation at the kennaook/Cape Grim atmospheric monitoring station in Tasmania, Australia to provide detailed cloud-aerosol observations in this region in order to address the greatest source of uncertainty in climate models – atmospheric aerosols and how they influence cloud formation (Carslaw et al. 2013). In support of the ARM observations, an Australian Research Council (ARC)-funded project “Southern Ocean aerosols: sources, sinks and impact on cloud properties,” led by the Queensland University of Technology, complemented the ARM measurements with a suite of chemical measurements at the kennaook/Cape Grim site in northwestern Tasmania to provide more information on the processes controlling aerosol formation and growth. The deployment of the University of York LIF-SO2 instrument (Temple et al. 2025) in the ARM mobile facility container was part of this chemistry-focused deployment. Increased observational efforts are critical for understanding sources and sinks of Southern Ocean aerosols, in particular the role of marine micro-organisms (phytoplankton, algae) on aerosols formation, their properties and growth, cloud droplet formation, and the conversion of cloud droplets to ice crystals and precipitation. The observational focus of the ARC-funded project is aerosol chemical composition and their gaseous precursors. The remote nature of the Southern Ocean poses a significant analytical challenge when studying gaseous precursors, as low concentrations are often below the limits of detection of commercial instrumentation. Historically this has meant that observations have had to be time-averaged over days to weeks to achieve the limits of detection required. Although useful when considering overall average levels of aerosol precursors, this time-averaging obscures temporal variability that can provide insight into the controlling processes. Over recent years advances in analytical techniques have made high-time-resolution measurements of key gas-phase aerosol precursors achievable with sufficiently low limits of detection.
In their most general form, the Reynolds averaged conservation equations result from ensemble or time averages of the instantaneous Navier-Stokes equations or their compressible counterparts. For these averaging processes to be consistent, the averaging time period must exceed the periods identified with the largest time scales of the turbulence, and yet be shorter than the characteristic times of the flow field. With these equations long period variations in the flow fields are deterministic, provided initial conditions are known. The average dependent variables are sufficiently smooth to be resolvable by finite difference techniques consistent with the size and speed of modern computers.
Results of an analytical and experimental investigation, directed at the understanding of the impact of periodic unsteadiness on the time-averaged flows in axial flow turbomachines, are presented. Analysis of available experimental data, from a large-scale rotating rig (LSRR) (low speed rig), shows that in the time-averaged axisymmetric equations the magnitude of the terms representing the effect of periodic unsteadiness (deterministic stresses) are as large or larger than those due to random unsteadiness (turbulence). Numerical experiments, conducted to highlight physical mechanisms associated with the migration of combustor generated hot-streaks in turbine rotors, indicated that the effect can be simulated by accounting for deterministic stress like terms in the time-averaged mass and energy conservation equations. The experimental portion of this program shows that the aerodynamic loss for the second stator in a 1-1/2 stage turbine are influenced by the axial spacing between the second stator leading edge and the rotor trailing edge. However, the axial spacing has little impact on the heat transfer coefficient. These performance changes are believed to be associated with the change in deterministic stress at the inlet to the second stator. Data were also acquired to quantify the impact of indexing the first stator relative to the second stator. For the range of parameters examined, this effect was found to be of the same order as the effect of axial spacing.
The present investigation is concerned with an analysis of the atmospheric angular momentum balance, based on the simulation data of the Oregon State University two-level atmospheric general circulation model (AGCM). An attempt is also made to gain an understanding of the involved processes. Preliminary results on the angular momentum and mass balance in the AGCM are shown. The basic equations are examined, and questions of turbulent momentum transfer are investigated. The methods of analysis are discussed, taking into account time-averaged balance equations, time and longitude-averaged balance equations, mean meridional circulation, the mean meridional balance of relative angular momentum, and standing and transient components of motion.
Recent research using NASA Ames AH-1 and OH-58C helicopters, and NASA Glenn test rigs, has shown that in-flight vibration data are typically non-stationary [l-4]. The nature and extent of this non-stationarity is most likely produced by several factors operating simultaneously. The aerodynamic flight environment and pilot commands provide continuously changing inputs, with a complex dynamic response that includes automatic feedback control from the engine regulator. It would appear that the combined effects operate primarily through an induced torque profile, which causes concomitant stress modulation at the individual internal gear meshes in the transmission. This notion is supported by several analyses, which show that upwards of 93% of the vibration signal s variance can be explained by knowledge of torque alone. That this relationship is stronger in an AH-1 than an OH-58, where measured non-stationarity is greater, suggests that the overall mass of the vehicle is an important consideration. In the lighter aircraft, the unsteady aerodynamic influences transmit relatively greater unsteady dynamic forces on the mechanical components, quite possibly contributing to its greater non-stationarity . In a recent paper using OH-58C pinion data [5], the authors have shown that in computing a time synchronous average (TSA) for various single-value metric computations, an effective trade-off can be obtained between sample size and measured stationarity by using data from only a single mesh cycle. A mesh cycle, which is defined as the number of rotations required for the gear teeth to return to their original mating position, has the property of representing all of the discrete phase angles of the opposing gears exactly once in the average. Measured stationarity is probably maximized because a single mesh cycle of the pinion gear occurs over a very short span of time, during which time-dependent non-stationary effects are kept to a minimum. Clearly, the advantage of local stationarity diminishes as the temporal duration of the cycle increases. This is most evident for a planetary mesh cycle, which can take several minutes to complete.
Array of probes yields data on static and total pressures and cross-stream turbulence. Is combination of separate pressure-probe arrays described in "Measuring Streamwise Momentum and Cross-Stream Turbulence" (ARC-11934), and "Probe Rakes To Measure Static Pressure and Turbulence" (ARC-12973). Equations that express directional responses of various probes in array solved together to eliminate unknown quantities; makes it possible to process digitized time-averaged probe readings together to obtain time-averaged static, stagnation, and cross-stream-turbulence pressures.
Time average climatology and low-frequency variabilities of the global hydrologic cycle (GHC) in the Goddard Laboratory for Atmospheres (GLA) general circulation model (GCM) were investigated in the present work. A 730-day experiment was conducted with the GLA GCM forced by insolation, sea surface temperature, and ice-snow undergoing climatological annual cycles. Ifluences of interactive soil moisture on time average climatology and natural variability of the GHC were also investigated by conducting 365-day experiments with and without interactive soil moisture. Insolation, sea surface temperature, and ice-snow were fixed at their July levels in the latter two experiments. Results show that the model's time average hydrologic cycle variables for July in all three experiments agree reasonably well with observations. Except in the case of precipitable water, the zonal average climates of the annual cycle experiment and the two perpetual July experiments are alike, i.e., their differences are within limits of the natural variability of the model's climate. Statistics of various components of the GHC, i.e., water vapor, evaporation, and precipitation, are significantly affected by the presence of interactive soil moisture. A long-term trend is found in the principal empirical modes of variability of ground wetness, evaporation, and sensible heat. Dominant modes of variability of these quantities over land are physically consistent with one another and with land surface energy balance requirements. The dominant mode of precipitation variability is found to be closely related to organized convection over the tropical western Pacific Ocean. The precipitation variability has timescales in the range of 2 to 3 months and can be identified with the stationary component of the Madden-Julian Oscillation. The precipitation mode is not sensitive to the presence of interactive soil moisture but is closely linked to both the rotational and divergent components of atmospheric moisture transport. The present results indicate that globally coherent natural variability of the GHC in the GLA GCM has two basic timescales in the absence of annual cycles of external forcings: a long-term trend associated with atmosphere-soil moisture interaction which affects the model atmosphere mostly over midlatitude continental regions and a large-scale 2- to 3-month variability associated with atmospheric moist processes over the western Pacific Ocean.
Simulation of unsteady viscous turbomachinery flowfields is presently impractical as a design tool due to the long run times required. Designers rely predominantly on steady-state simulations, but these simulations do not account for some of the important unsteady flow physics. Unsteady flow effects can be modeled as source terms in the steady flow equations. These source terms, referred to as Lumped Deterministic Stresses (LDS), can be used to drive steady flow solution procedures to reproduce the time-average of an unsteady flow solution. The goal of this work is to investigate the feasibility of using inviscid lumped deterministic stresses to model unsteady combustion hot streak migration effects on the turbine blade tip and outer air seal heat loads using a steady computational approach. The LDS model is obtained from an unsteady inviscid calculation. The LDS model is then used with a steady viscous computation to simulate the time-averaged viscous solution. Both two-dimensional and three-dimensional applications are examined. The inviscid LDS model produces good results for the two-dimensional case and requires less than 10% of the CPU time of the unsteady viscous run. For the three-dimensional case, the LDS model does a good job of reproducing the time-averaged viscous temperature migration and separation as well as heat load on the outer air seal at a CPU cost that is 25% of that of an unsteady viscous computation.
In 1983, two VLC-11 masers were delivered to the U.S. Naval Observatory by the Smithsonian Astrophysical Observatory. Last year the short-term stability of these masers was reported and the effect of this short-term stability on timekeeping performance was examined. Since the date of installation, 13 September 1983, data on the masers' long-term performance have been accumulated. The Allan variance, agma(tau), of the relative frequency between the masers reaches a minimum of about 4 parts in 10 to the 16th power at averaging times 5,000 seconds and rises at longer averaging times due, at least partly, to systematic frequency drift. The systematic frequency drifts, expressed in units of fractional frequency difference per day are discussed.
To estimate the local heat-transfer coefficients around an external-tank (ET) surface, a 9.8-m-high by 8.4-m-diameter ET simulator is constructed, instrumented, and tested in the naturally turbulent outdoor environment. Two different configurations under which the testing is conducted are described. The time-average, local values of Nusselt number at time-average Reynolds numbers of 2.2 x 10 to the 6th, 2.6 x 10 to the 6th, and 4.5 x 10 to the 6th are presented. It is shown that, at the same Reynolds numbers, the heat transfer coefficients due to the atmospheric airflow are higher than those due to airflow in a low-turbulent-intensity wind tunnel.
Hub corner stall regions, endwall boundary layers, tip leakage flows and airfoil wakes combine to form the 3D flowfields found in axial turbomachines. Turbomachinery flow fields are also inherently unsteady because of the relative motion between rotor and stator airfoils. This relative motion causes complex time-varying aerodynamic interactions to occur between the different aerodynamic structures and the rotor and stator airfoils. It is necessary to understand the 3D unsteady aerodynamics associated with these interactions in order to design turbomachines that are both lightweight and compact as well as reliable and efficient. The current study uses a time-accurate 3D thin-layer Navier-Stokes zonal approach to investigate the unsteady aerodynamics of multistage turbines and compressors. Relative motion between rotor and stator airfoils is accounted for by the use of systems of patched and overlaid grids. Time-averaged surface pressures, surface flow visualizations, and time-averaged flow field contours have been computed for a 1 1/2-stage turbine and are in good agreement with experimental data. This favorable comparison represents an initial validation of the current method for unsteady computations of multistage turbomachinery flows.
We find that variability of the iron K alpha line is common in Seyfert 1 galaxies. Using data from the ASCA archive for objects that have been observed more than once during the mission, we study the time-averaged spectra from individual observations, thereby probing variability on timescales that range from days to years. Since the statistics of the data do not warrant searches for line variability in terms of a complex physical model, we use a simple Gaussian to model the gross shape of the line and then use the centroid energy, intensity, and equivalent width as robust indicators of changes in the line profile. We find that approximately 70% of Seyfert 1 galaxies (10 out of 15) show variability in at least one of these parameters: the centroid energy, intensity, and equivalent width vary in six, four, and eight sources, respectively. Because of the low signal-to-noise ratio, limited sampling, and time averaging, we consider these results to represent lower limits to the rate of incidence of variability. In most cases changes in the line do not appear to track changes in the continuum. In particular, we find no evidence for variability of the line intensity in NGC 4151, suggesting an origin in a region larger than the putative accretion disk, where most of the iron line has been thought to originate. Mrk 279 is investigated on short timescales. The time-averaged effective line energy (as measured by the Gaussian center energy, which is weighted by emission in the entire line profile) is 6.5 keV in the galaxy rest frame. As the continuum flux increases by 20% in a few hours, the Fe K line responds within approximately 10,000 seconds with the effective line energy increasing by 0.22 keV (approximately 10,500 kilometers per second). We also examine the ROSAT PSPC spectrum of Mrk 279 but find inconsistencies with ASCA. Problems with the ASCA and ROSAT calibration that affect simultaneous spectral fits at low energies are discussed in an appendix.
Instrument generates average curve of 100 consecutive cycles of any function that occurs as time varying electrical signal. Device has been used to average parameters on 1975 Chevrolet V-8 engine, and on Continental six cylinder aircraft engine.
Substitution of observed monthly mean sea-surface temperatures (SSTs) as lower boundary conditions, in place of climatological SSTs, failed to improve the model simulations. While the impact of SST anomalies on the model output is greater at sea level than at upper levels the impact on the monthly mean simulations is not beneficial at any level. Shifts of one and two days in initialization time produced small, but non-trivial, changes in the model-generated monthly mean synoptic fields. No improvements in the mean simulations resulted from the use of either time-averaged initial data or re-initialization with time-averaged early model output. The noise level of the model, as determined from a multiple initial state perturbation experiment, was found to be generally low, but with a noisier response to initial state errors in high latitudes than the tropics.