SEARCH · Engineering Papers

Results for “temperature effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1982

X-band noise temperature effects of rain on DSN antenna feedhorns

Simulated rain tests were carried out to determine the noise temperature contribution of liquid water adhering to the aperture cover material on both a standard DSN X-band feedhorn and on an S/X-band common aperture feedhorn. It was found that for the particular common aperture feedhorn tested, system noise temperature increases were much greater when the plastic horn cover material was old and weathered than when it was new. The age and condition of the aperture cover material is believed to be a major factor in the amount of degradation experienced by a telecommunications system during rain events.

Slobin, S. D.↗

NASA NTRS1996

Photosynthetic photon flux, photoperiod, and temperature effects on emissions of (Z)-3-hexenal, (Z)-3-hexenol, and (Z)-3-hexenyl acetate from lettuce

To investigate the effects of environment on plant volatile emissions, 'Waldmann's Green' leaf lettuce was cultivated under different levels of photosynthetic photon flux (PPF), photoperiod, and temperature. A modified growth chamber was used to sample plant volatile emissions nondestructively, over time, and under controlled conditions. Total volatile emission rates were significantly higher from lettuce cultivated under PPF of 360 or 200 micromoles m-2 s-1 compared to 105 micromoles m-2 s-1, and significantly higher under a 16-h photoperiod than an 8-h photoperiod. No differences were detected among emission rates from different temperature treatments. In controlled environments, emissions could be regulated by adjusting environmental conditions accordingly.

NASA Program Advanced Life Support↗

DOE OSTI2021

Elevated Inlet Temperature Effects on the Operation of a Rotating Detonation Combustor

This experimental work explores the impact of elevated inlet temperatures on a H2/air operated rotating detonation combustor (RDC) without a nozzle. In practical systems, the temperature of the inlet air would be higher than that found in many laboratory settings. Inlet air pre-heating up to 480 K was accomplished by using an integrated pebble-bed heater. The operation of the RDC was found to switch from a single detonation wave at ambient temperature to two, counter-rotating detonation waves at higher temperatures for some of the conditions tested. In addition, the detonation wave properties (i.e., speed and pressure ratio) were impacted by the elevated inlet temperature. The cause of the observed changes in the operation dynamics was explored by evaluating the existence of secondary waves prior to the operational mode change and the changes in the cycle-averaged inlet Mach number.

Feleo, Alexander↗

NASA NTRS1972

Temperature effects on the strainrange partitioning approach for creep-fatigue analysis

Examination is made of the influence of temperature on the strainrange partitioning approach to creep-fatigue. Results for Cr-Mo steel and Type 316 stainless steel show the four partitioned strainrange-life relationships to be temperature insensitive to within a factor of two on cyclic life. Monotonic creep and tensile ductilities were also found to be temperature insensitive to within a factor of two. The approach provides bounds on cyclic life that can be readily established for any type of inelastic strain cycle. Continuous strain cycling results obtained over a broad range of high temperatures and frequencies are in excellent agreement with bounds provided by the approach. The observed transition from one bound to the other is also in good agreement with the approach.

Halford, G. R.↗

NASA NTRS1972

Temperature effects on the strainrange partitioning approach for creep-fatigue analysis.

Examination is made of the influence of temperature on the strain-range partitioning approach to creep-fatigue. Results for 2.5Cr-1Mo steel and Type 316 stainless steel show the four partitioned strain range-life relationships to be temperature insensitive to within a factor of two on cyclic life. Monotonic creep and tensile ductilities were also found to be temperature insensitive to within a factor of two. The approach provides bounds on cyclic life that can be readily established for any type of inelastic strain cycle.

Halford, G. R.↗

NASA NTRS1990

Total temperature effects on centerline Mach number characteristics of freejets

This paper describes a detailed experimental study of Mach number centerline characteristics of unheated and heated freejets. The jet characteristics were obtained at a range of jet Mach numbers from 0.1 to 0.9 and jet total temperatures up to 900 K. Previously published results showed that the jet total temperature significantly affects the nozzle-exit, boundary-layer characteristics. The results of this study indicate that a strong correlation exists between nozzle-exit, boundary-layer conditions and freejet development. It is clear from this investigation that experimental data on freejet development cannot be meaningfully compared from one facility to another without specific knowledge of nozzle-exit, boundary-layer conditions. It was concluded that direct effect of the jet operating conditions (elevated flow temperature) on freejet development is much less important than the indirect effect due to changed nozzle-exit, boundary-layer characteristics.

Lepicovsky, J.↗

DOE OSTI2021

Momentum distribution of the uniform electron gas at finite temperature: Effects of spin polarization

We carry out extensive direct path integral Monte Carlo (PIMC) simulations of the uniform electron gas (UEG) at finite temperature for different values of the spin-polarization ξ. This allows us to unambiguously quantify the impact of spin effects on the momentum distribution function n(k) and related properties. We find that interesting physical effects like the interaction-induced increase in the occupation of the zero-momentum state n(0) substantially depend on ξ. Our results further advance the current understanding of the UEG as a fundamental model system, and are of practical relevance for the description of transport properties of warm dense matter in an external magnetic field. All PIMC results are freely available online and can be used as a benchmark for the development of methods and applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Processing Temperature Effect on Failure Behavior of Unidirectional Thermoplastic Polymer-fiber-reinforced Polymers (PFRPs)

This study aimed to examine the influence of processing temperature on the mechanical and morphological characteristics of unidirectional (UD) thermoplastic polymer-fiber-reinforced polymers (PFRPs), utilizing UHMWPE-polymer-fiber-reinforced HDPE composites as an example. To achieve this objective, UD thermoplastic PFRPs were produced through filament winding and hot pressing techniques, employing five distinct processing temperatures within the range spanning from the melting onset temperature of the polymer matrix to the melting peak temperature of the reinforcing polymer fiber. By conducting the uni-axial tensile tests on the UD UHMWPE-polymer-fiber-reinforced HDPE composites fabricated at different processing temperatures, it was shown that the optimal longitudinal tensile properties of the composites, comparable with glass-fiber-reinforced thermoset or thermoplastic polymers (GFRPs or GFRTPs) can be achieved when the processing temperature does not significantly exceeds the melting onset temperature of the reinforcing polymer fiber. However, when the processing temperature exceeds this threshold, the mechanical properties of the composites are significantly reduced, as evidenced by the transition in the failure morphology from the presence of significant splitting cracks to the occurrence of plastic necking due to the complete melting of the reinforcing polymer fibers in a composite. Particularly, the ductile behavior of the optimal thermoplastic PFRPs investigated in this study is superior than that of carbon-fiber-reinforced thermoset or thermoplastic polymers (CFRPs or CFRTPs) and even GFRPs and GFRTPs. This study not only provides valuable insights into the proper fabrication of high-performance thermoplastic PFRPs but also offers useful experimental data that can aid in the validation and development of computational models, particularly those related to processing modeling.

Qiao, Yao↗

NASA NTRS1986

High-temperature effect of hydrogen on sintered alpha-silicon carbide

Sintered alpha-silicon carbide was exposed to pure, dry hydrogen at high temperatures for times up to 500 hr. Weight loss and corrosion were seen after 50 hr at temperatures as low as 1000 C. Corrosion of SiC by hydrogen produced grain boundary deterioration at 1100 C and a mixture of grain and grain boundary deterioration at 1300 C. Statistically significant strength reductions were seen in samples exposed to hydrogen for times greater than 50 hr and temperatures above 1100 C. Critical fracture origins were identified by fractography as either general grain boundary corrision at 1100 C or as corrosion pits at 1300 C. A maximum strength decrease of approximately 33 percent was seen at 1100 and 1300 C after 500 hr exposure to hydrogen. A computer assisted thermodynamic program was also used to predict possible reaction species of SiC and hydrogen.

Hallum, G. W.↗

DOE OSTI2025

Finite ion temperature effects on electrostatic instabilities in partially magnetized plasmas

In this paper, the effects of warm ions on electrostatic, kinetic instabilities observed in partially magnetized plasmas, such as the electron cyclotron drift instability (ECDI) and modified two-stream instability (MTSI), are investigated. The kinetic dispersion relation that accounts for warm, non-magnetized ions and warm, magnetized electrons is solved using a complex root-finding technique [A. C. Denig and K. Hara, Phys. Plasmas 30, 032108 (2023)]. It is observed that finite ion temperature introduces ion Landau damping effects, decreasing the growth rate of most unstable modes. The high-frequency, short-wavelength ECDI modes are more strongly affected by ion Landau damping than the low-frequency, long-wavelength MTSI modes. The solutions of the kinetic dispersion relation for MTSI are compared with the fluid dispersion relation of MTSI, which was originally proposed by McBride et al. [Phys. Fluids 15 2367–2383 (1972)]. The differences in the dispersion characteristics between the kinetic and fluid MTSI limits are assessed, illustrating the effects of electron and ion Landau damping on kinetic instabilities in partially magnetized plasmas.

Denig, A. C. (ORCID:0000000253339572)↗

NASA NTRS1993

Atomizing-gas temperature effect on cryogenic spray dropsize

Correlating expressions for two-phase flow breakup of liquid nitrogen, LN2, jets in sonic velocity nitrogen gasflows were obtained for an atomizing-gas temperature range of 111 to 442 K. The correlations were based on characteristic dropsize measurements obtained with a scattered-light scanner. The effect of droplet vaporization on the measurements of the volume-median dropsize was calculated by using previously determined heat and momentum transfer expressions for droplets evaporating in high-velocity gasflow. Finally, the dropsize of the originally unvaporized spray was calculated, normalized with respect to jet diameter and correlated with atomizing-gas flowrate and temperature.

Ingebo, Robert D.↗

NASA NTRS1993

Atomizing-gas temperature effect on cryogenic spray dropsize

Ingebo, Robert D.↗

DOE OSTI2022

Temperature Effects in Flexible Adsorption Processes for Amorphous Microporous Polymers

A collection of atomistic molecular simulations is reported that illustrate the impact of adsorption temperature on species uptake and adsorbate-induced structural rearrangement for amorphous polymers of intrinsic microporosity. Temperature-sensitive structural rearrangement is evaluated by contrasting two methods: standard grand canonical Monte Carlo simulations using a rigid framework approximation and a combined Monte Carlo/molecular dynamics approach that fully incorporates framework flexibility. We report single-component gas phase adsorption isotherms for CH 4 , C 2 H 4 , C 2 H 6 , C 3 H 6 , C 3 H 8 , and CO 2 across a temperature range of 250–400 K for models of an archetypal polymer of intrinsic microporosity, PIM-1. A quadratic model is presented that captures two main mechanisms of temperature-dependent adsorption-induced deformation of PIM-1 up to a relative swelling of 1.15: thermal expansion and an increased propensity to swell as a function of species uptake. Two case studies are reported that highlight the critical role of operating temperature in industrial storage and separation applications. The first study focuses on methane storage and delivery applications using a pressure–temperature swing adsorption application (PTSA). We demonstrate that larger working capacities are accompanied by increased volumetric strain between adsorption–desorption steps. The second case study considers PIM-1 as an adsorbent to separate an exemplar ternary syngas mixture at operating temperatures ranging 300–550 K. Here, a temperature threshold of ~400 K is identified, beyond which adsorption-induced PIM-1 swelling is negligible and the solubility selectivity-loading curve transitions to exhibiting a nearly linear relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Nuclear reactor radiation and temperature effects on piezoelectric surface acoustic wave devices

Surface acoustic wave (SAW) resonators were characterized in-situ in a nuclear reactor environment at high temperature. Devices based on lithium niobate (LiNbO 3 ), aluminum nitride (sc-AlN), and thin-film aluminum nitride on sapphire substrate (AlN/sapphire) were tested up to 400 °C temperature and 1.9 × 10 12 n/cm 2 s neutron flux. Shifts in device resonant frequency were detected in response to temperature and neutron flux. Devices undergo a frequency change when exposed to neutron flux. At 300 °C, AlN/sapphire produced the strongest neutron flux response about 1.02 ppm at 1.27 × 10 12 n/cm 2 s neutron flux (5.7 × 10 4 rad-Si/hr neutron dose rate), compared to 0.30 ppm for LiNbO 3 and 0.17 ppm for sc-AlN. While the transient kinetics in response to step change in neutron flux support the defect-accumulation mechanism, the concurrent measurement of device temperature using resistive temperature sensor suggests additional heating caused by absorption of gamma rays can also play a role. These results make SAW devices attractive candidates for sensor applications in extreme environments.

Aluminum nitride↗

NASA NTRS1983

Temperature effects on the stratosphere of the April 4, 1982 eruption of El Chichon, Mexico

Aerosol evaluation was found to be necessary to explain the 30 mb temperature increases observed in July-Oct. 1982 in comparison with averages for the period 1964-1981. An average difference of 1-1.5 C was determined at 30 mb, coinciding with 1 C deviations at the 50 mb level, for the first half of 1982. The 30 mb differences increased to 4.5-5 C, compared to the 18 yr average, during the July-Oct. period. GOES satellite imagery indicated that material from the El Chichon volcano eruptions had entered the stratosphere. Lidar backscattering ratios indicated the preponderance of the material resided in the 22-28 km interval. Airborne lidar measurements on two occasions confirmed the anomalies' presence south of 30 deg N latitude. Further monitoring of the aerosol evolution is indicated.

Labitzke, K.↗

NASA NTRS1972

Surface temperature effect on subsonic stall.

Results of an analytical and experimental study of boundary layer flow over an aerodynamic surface rejecting heat to a cool environment. This occurs following reentry of a Space Shuttle vehicle. Analytical studies revealed that a surface to freestream temperature ratio, greater than unity tended to destabilize the boundary layer, hastening transition and separation. Therefore, heat transfer accentuated the effect of an adverse pressure gradient. Wind tunnel tests of a 0012-64 NACA airfoil showed that the stall angle was significantly reduced while drag tended to increase for freestream temperature ratios up to 2.2.

Macha, J. M.↗

NASA NTRS1990

Measurement of threshold temperature effects in dissociative electron attachment to HI and DI

From accurate spectroscopic constants it is found that the thermal dissociative-attachment process (DA) in DI should be exothermic only for rotational levels J greater than 8 in v = O. Here, measurement of an enhancement of DA with rotational temperature T in the range 298-468 K is reported. The effect is easily accounted for by the increase in total fractional population of excited J levels in DI relative to HI. The effect affords a rotational analog to the use of vibrationally excited molecules (e.g., HCl) in a plasma to control electron conduction.

Chutjian, A.↗

NASA NTRS2016

Environmental Temperature Effect on the Far-Infrared Absorption Features of Aromatic-Based Titan's Aerosol Analogs

Benzene detection has been reported in Titans atmosphere both in the stratosphere at ppb levels by remote sensing and in the thermosphere at ppm levels by the Cassini's Ion and Neutral Mass Spectrometer. This detection supports the idea that aromatic and heteroaromatic reaction pathways may play an important role in Titans atmospheric chemistry, especially in the formation of aerosols. Indeed, aromatic molecules are easily dissociated by ultraviolet radiation and can therefore contribute significantly to aerosol formation. It has been shown recently that aerosol analogs produced from a gas mixture containing a low concentration of aromatic and/or heteroaromatic molecules (benzene, naphthalene, pyridine, quinoline and isoquinoline) have spectral signatures below 500/cm, a first step towards reproducing the aerosol spectral features observed by Cassini's Composite InfraRed Spectrometer (CIRS) in the far infrared. In this work we investigate the influence of environmental temperature on the absorption spectra of such aerosol samples, simulating the temperature range to which aerosols, once formed, are exposed during their transport through Titans stratosphere. Our results show that environmental temperature does not have any major effect on the spectral shape of these aerosol analogs in the far-infrared, which is consistent with the CIRS observations.

Gautier, Thomas↗