Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stress state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Phase Transformations Driving Biaxial Stress Reduction During Wake-Up of Ferroelectric Hafnium Zirconium Oxide Thin Films

Biaxial stress is identified to play an important role in the polar orthorhombic phase stability in hafnium oxide-based ferroelectric thin films. However, the stress state during various stages of wake-up has not yet been quantified. In this work, the stress evolution with field cycling in hafnium zirconium oxide capacitors is evaluated. The remanent polarization of a 20 nm thick hafnium zirconium oxide thin film increases from 9.80 to 15.0 µC cm –2 following 10 6 field cycles. This increase in remanent polarization is accompanied by a decrease in relative permittivity that indicates that a phase transformation has occurred. The presence of a phase transformation is supported by nano-Fourier transform infrared spectroscopy measurements and scanning transmission electron microscopy that show an increase in ferroelectric phase content following wake-up. The stress of individual devices field cycled between pristine and 10 6 cycles is quantified using the sin 2 (ψ) technique, and the biaxial stress is observed to decrease from 4.3 ± 0.2 to 3.2 ± 0.3 GPa. The decrease in stress is attributed, in part, to a phase transformation from the antipolar Pbca phase to the ferroelectric Pca2 1 phase. This work provides new insight into the mechanisms controlling and/or accompanying polarization wake-up in hafnium oxide-based ferroelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In situ measurement of three-dimensional intergranular stress localizations and grain yielding under elastoplastic axial-torsional loading

The three-dimensional grain-averaged response of solid bar samples under non-proportional (NP) elastoplastic axial-torsional loading was investigated using in situ high energy diffraction microscopy (HEDM) and companion crystal plasticity finite element (CPFE) modeling. Important stress metrics including applied shear (σ θZ ) and axial (σ ZZ ) stress tensor components, stress and stress deviator tensor invariants (I 1 , J 2 , and J 3 ), von Mises equivalent stress (σ$^{grain}_{VM}$), maximum resolved shear stress (mRSS), stress triaxiality (η), and lode angle parameter ($\barθ$) values were tracked for ~300 grains under two different loading conditions: (1) Torsion-dominated loading (low NP) and (2) Tension-torsion loading (high NP) in equiatomic NiCoCr, a representative multicomponent face-centered cubic (FCC) superalloy. Overall, significant stress localizations existed within both samples as evidenced by the radial dependence of grain-resolved σ θZ , σ$^{grain}_{VM}$, and J 2 ; by comparison, I 1 , J 3 , η, and $\barθ$ metrics did not show discernible trends within the volume. These stress localizations reveal a complex interplay between axial and shear stress components (e.g., stress coupling) resulting in grain yielding near the sample surface largely driven by shear stress, whereas internal grain yielding was largely accommodated by axial stress. Grain-resolved stress localization trends were described well by the CPFE model, although some discrepancies in magnitude occurred, particularly for volumetric stress metrics (I 1 and η) due to initial type II residual stress distributions. The superposition of initial residual stress states onto CPFE grain-resolved data significantly improved model accuracy for η. This suggests that residual stresses more strongly influence the simulation of volumetric rather than deviatoric (yield) stress metrics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Control of deviatoric stress in the diamond anvil cell through thermal expansion mismatch stress in thin films

Elastic and plastic properties of materials and phase transitions at extreme conditions vary with both hydrostatic pressure and deviatoric stress. To generate and measure controlled deviatoric stress at pressures beyond those accessible with large volume differential and rotational presses and optical access for spectroscopy, experiments tested the combination of diamond anvil cell and thin film technology. Thin films of polycrystalline Cr-doped Al 2 O 3 ruby were prepared using pulsed laser deposition on single-crystal substrates of either Al 2 O 3 sapphire or yttria-stabilized cubic zirconia for contrasting initial film stress, and loaded in diamond anvil cells for confining stress. The piezospectroscopic response of the ruby films demonstrates consistently higher deviatoric stress in the film on zirconia relative to the film on the control sapphire, and an increase in deviatoric stress with applied load. Complementary synchrotron X-ray diffraction of the zirconia substrate confirmed that no pressure-induced phase transitions impacted the stress state of the ruby film, but differences in compressibility of film and substrate result in changes in film stress analogous to thermal expansion mismatch. Furthermore, this technique may be applied to evaluate elastic and plastic response of thin films of a variety of materials under extreme stress.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sensitivity of Dislocation-GB interactions to simulation setups in atomistic models

Dislocation-grain boundary (GB) interactions play an integral role in strengthening of crystalline materials, and are dependent on external loading conditions and atomic arrangements at the grain boundary. While molecular dynamics (MD) simulations can provide critical insights into relationships between these parameters and the exact interaction, the outcomes are sensitive to the computational setup. Here, in this work, we explore the effect of computational setup (system size, GB orientation and boundary conditions) on stress-controlled dislocation-grain boundary (DGB) reactions using MD simulations for a well-studied copper symmetric $\langle$1 1 2$\rangle$ tilt boundary. The study demonstrates that the DGB reactions (pinning, absorption, transmission, etc.) are sensitive to the system size and the orientation of the GB to the applied stress. Additionally, the current work shows that there is a critical system size for the dislocation-grain boundary reaction stresses to converge, one which was found to be much larger than the setups in comparable MD studies. This was attributed to the specific stress states and the influence of surfaces, fixed or free, as these computational setups are modified. Finally, a stress-controlled setup with minimal model artifacts is examined, and the effect of coupled Schmid and non-Schmid stress components on the dislocation-GB reactions are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Challenges in simulating ground interacting nuclear explosions

This paper summarizes recent above-ground nuclear explosion simulations as part of a broader effort to better characterize conditions within a fireball that may influence the chemical evolution of bomb materials and other materials entrained from the local explosion environment. A critical component of this work is validation against historic footage of atmospheric testing, requiring that we understand how the frequency-dependent sensitivity of the utilized film footage influences data captured in such images. We focus first on the early physics of a nuclear explosion in the atmosphere before discussing some of the technical challenges we seek to capture in late-time models that include more complex emplacement conditions and subsurface features. We discuss required physics packages (compressible hydrodynamics, radiation transport, as well as necessary ancillary tables such as equations of state (EOS) and opacities). Additionally, we note reasonable “shortcuts” one may make and their limitations, e.g., using ideal gas EOS, replacing spectrally resolved radiation with spectrally averaged radiation, and exchanging deterministic transport with diffusion. We then discuss an approach to achieving an equilibrated initial stress state for problems where buoyancy and subsurface lithostatic stress are important. Our methodology is presented in the context of LLNL’s ALE3D multiphysics code but may readily be implemented in other codes. In this paper, we start with a description of the challenges of NUDET simulations, followed by a presentation of the simulated intensity (flux) as it would appear on an analysis of the Dixie test. We then progressively introduce additional complexity in subsequent sections (near-surface burst and gravity initialization) before concluding.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Neutron Diffraction Residual Stress Study of a AA2219-T87 Self-Reacting Friction Stir Weld

2219-T87 is a precipitation hardenable aluminum-copper alloy which sees wide use in structural aerospace components. Thick panels of this alloy are joined via self-reacting friction welding (SRFSW); however, this thermomechanical process can result in significant loss of the alloy’s strengthening precipitates and large residual stresses which are detrimental to mechanical behavior and performance. High-resolution maps of the residual strain and stress states along the normal, transverse, and longitudinal directions of 2219-T87 SRFSW were obtained using neutron diffraction measurements. Residual stress had the highest tensile value in the heat-affected zone (HAZ) and the largest compressive stress in the base metal region of the normal and transverse directions. Line profile residual stress distributions displayed an “M”-shaped distribution in each direction with the longitudinal direction being the most pronounced while 2D residual stresses displayed an hourglass-shaped pattern. Further, average maximal longitudinal residual stress values ranged from 60.6 to 85.6% of yield. Microhardness testing across the transverse weld section produced a “V”-shaped curve with slight hardness recovery in the stir zone. Maximal and minimal microhardness values were observed in the base metal (154 HV) and thermomechanically affected zone (82 HV), respectively. Microstructural evolution was recorded using optical microscopy and showed decreasing grain size from the HAZ to the stir zone.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Revealing the effect of local stresses on twin growth mechanisms in titanium using synchrotron X-ray diffraction

Deformation twinning has a significant impact on the evolution of microstructure and mechanical response in hexagonal close packed (hcp) metals. Understanding the physical mechanisms associated with twin nucleation and growth processes is important to enable the broad use of hcp metals. While both nucleation and growth are conditioned by the local stress state, few studies have quantified it in bulk deformed samples. In this study, we reveal the effects of local stresses on twin thickening using in-situ synchrotron experiments with differential aperture X-ray microscopy. High purity Ti is deformed under four-point bending to activate {1012} tensile twins. Further, 3D stress fields with a spatial resolution of 0.5μm are mapped in the vicinity of low and high macroscopic Schmid factor (MSF) twins growing inside a grain. Reconciling this experimental analysis with recent twin growth models reveals that the growth of low MSF twins is limited by the nucleation of twin growth defects in the high-purity Ti sample. While growth-inducing defect nucleation may occur in many places on the interface of the high resolved shear stress (RSS)/MSF twin, the nucleation rate of twinning disconnections for the low MSF twin is high only at the end of the twin near a stress concentration. Once nucleated, these defects easily propagate into lower RSS regions of the grain resulting in twin growth. This work highlights the importance of stress concentrations not only for twin (embryo) nucleation, but also to the growth process of twins, particularly in low MSF twins.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Analysis of Hydraulic Fracturing on the 4100 Level at the Sanford Underground Research Facility

A series of hydrofractures were performed on the 4100 ft. level of the Sanford Underground Research Facility (SURF) to quantify the minimum principal stress and stress orientation. The motivation for this work was to determine the suitability of the site as a second testbed for the EGS Collab project and to inform the testbed design. EGS Collab is a meso-scale project where experiments are being performed to increase permeability in low-permeability rock and improve our understanding of appropriate techniques and models required for developing enhanced geothermal systems. In order to design the second testbed, a ~50 m vertical HQ (96 mm) pilot borehole was drilled in June, 2019, to perform a series of mini-frac tests to determine rock stress state. Utilizing an elastic model based on the ISIP (Instantaneous Shut In Pressure), testing indicates that the minimum principal stress is 20.4 MPa oriented NNE (24°) and plunges at an angle of approximately 28°.

Ingraham, Mathew↗
DOE OSTI2021

Compositional and phase dependence of elastic modulus of crystalline and amorphous Hf 1- x Zr x O 2 thin films

The elastic moduli of amorphous and crystalline atomic layer-deposited Hf 1-x Zr x O 2 (HZO, x = 0, 0.31, 0.46, 0.79, 1) films prepared with TaN electrodes on silicon substrates were investigated using picosecond acoustic measurements. The moduli of the amorphous films were observed to increase between 211 ± 6 GPa for pure HfO 2 and 302 ± 9 GPa for pure ZrO 2 . In the crystalline films, it was found that the moduli increased upon increasing the zirconium composition from 248 ± 6 GPa for monoclinic HfO 2 to 267 ± 9 GPa for tetragonal ZrO 2 . Positive deviations from this increase were observed for the Hf 0.69 Zr 0.31 O 2 and Hf 0.54 Zr 0.46 O 2 compositions, which were measured to have moduli of 264 ± 8 GPa and 274 ± 8 GPa, respectively. These two compositions contained the largest fractions of the ferroelectric orthorhombic phase, as assessed from polarization and diffraction data. The biaxial stress states of the crystalline films were characterized through sin 2 (ψ) x-ray diffraction analysis. The in-plane stresses were all found to be tensile and observed to increase with the increasing zirconium composition, between 2.54 ± 0.6 GPa for pure HfO 2 and 5.22 ± 0.5 GPa for pure ZrO 2 . The stresses are consistent with large thermal expansion mismatches between the HZO films and silicon substrates. Furthermore, these results demonstrate a device-scale means to quantify biaxial stress for investigation on its effect on the ferroelectric properties of hafnia-based materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Sequential Fracture Activation and Stress Evolution During EGS Stimulation at Utah FORGE Revealed by Waveform Cross‐Correlation

Mapping fracture networks in Enhanced Geothermal Systems (EGS) is essential for optimizing reservoir performance, yet complex fracture evolution during stimulation remains difficult to resolve. This study examines the evolution of microseismicity and fracture networks during stage 3 of the 2022 EGS stimulation at the Utah Frontier Observatory for Research in Geothermal Energy site. We map the fracture network represented by 20 clusters of seismic events identified by waveform similarities with cross-correlation. We characterize their geometric properties such as strike, dip, length, and width, and analyze the time evolution of activated fractures. The results reveal a systematic fracture evolution: early activation of pre-existing natural fractures, complex network development during peak injection, and continued activation of less favorably oriented fractures post-injection. Magnitude calibration using the Principal Component Analysis of cross-correlated waveforms improves relative amplitude measurements, refining estimations of the Gutenberg-Richter b-values with spatial variations in b-values suggesting stress re-distribution across the stimulated area. Analysis of the stress state of selected fractures further shows that fractures requiring higher excess pore pressure primarily activate at the end of injection and post-injection, highlighting stress transfer due to pore pressure as a dominant triggering mechanism. These findings provide insights into fracture propagation, stress evolution, and seismic hazard assessment in EGS reservoirs.

Asirifi, Richard [Texas A & M Univ., College Stati↗
DOE OSTI2022

Analyzing the effect of pressure on the properties of point defects in $\gamma\mathrm{U–Mo}$ through atomistic simulations

Uranium–molybdenum (U–Mo) alloys in monolithic fuel foil are the primary candidate for the conversion of high-performance research reactors in the USA. Monolithic fuel is utilized in a plate-type design with a zirconium diffusion barrier and aluminum cladding. These fuel types are unique in that they contain no plenum for the release of fission gases, which, in conjunction with the aluminum cladding, can lead to large stress states within the fuel. The nature of how fundamental processes of radiation damage, including the evolution of point defects, under such stresses occur is unknown. In this work, we present molecular dynamics simulations of the formation energy of point defects under applied stress. We report this work will allow for the implementation of stress-dependent microstructural evolution models of nuclear fuels, including those for both fission gas bubble growth and creep, which are critical to ensure the stable and predictable behavior of research reactor fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Effects of Plume Targeted Cooling on Residual Stress in Controlled Atmosphere Plasma Sprayed Coatings

Thermal spray processes can benefit from cooling to maintain substrate temper, reduce processing times, and manage thermally induced residual stresses. “Plume quenching” is a plume-targeted cooling technique which has been shown to reduce substrate temperatures by redirection of hot plume gases using a lateral argon curtain injected into the plume, while limiting interaction with the substrate or affecting coating properties. Here, this study explores the use of this technique for residual stress management by reducing the thermally driven component in nickel and tantalum coatings on titanium and aluminum substrates. The in-situ residual stress profiles were measured for all substrate and coating pairings during spraying and cooling, and the deposition and thermal stresses recorded. For substrate and coating pairings where the predominant component of residual stress was thermal (driven by a large difference in coefficient of thermal expansion, Δα, between coating and substrate), plume quenching reduced both the thermal stress and the final stress state of the coating. This was seen primarily in tantalum on aluminum coatings where the Δα was -17 × 10 -6 /°C, and thermal stress was reduced by 7.5% and 22.4% for the plume quenching rates of 50 and 100 slpm, respectively.

42 ENGINEERING↗
DOE OSTI2026

Mapping the Residual Stress Distribution in Polycrystalline Quartz Tiger's Eye Using Raman Spectroscopy

Stress distribution maps in polycrystalline materials are needed to reveal stress pathways caused by short‐and long‐range interactions of crystallites. Stress induced changes to wavenumbers in Raman spectroscopy is a well‐known phenomenon that occurs when a crystalline material undergoes elastic strain. Using spatially resolved Raman spectroscopy, we have developed a technique to experimentally measure grain‐scale residual stresses across a sample of polycrystal quartz Tiger's Eye. The results of this technique are validated using multiple criteria, including evaluation of the residual stress map itself and the accuracy of the measurements taken. The residual map of Tiger's Eye shows striking similarity to observed characteristics of other polycrystalline residual stress distributions, revealing heterogenous areas of high and low magnitude stresses. The stress magnitudes are consistent with residual stress magnitudes previously measured from polycrystalline quartz. Characterization of Tiger's Eye quartz also revealed the geometric nature of the iron oxide inclusions, not previously observed in Tiger's Eye quartz. With this technique, we present a residual stress map of Tiger's Eye quartz that shows with accuracy a heterogeneous stress state with inter‐ and intra‐granular detail.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multiscale Shear Properties and Flow Performance of Milled Woody Biomass

One dominant challenge facing the development of biorefineries is achieving consistent system throughput with highly variant biomass feedstock quality and handling performance. Current handling unit operations are adapted from other sectors (primarily agriculture), where some simplifying assumptions about granular mechanics and flow performance do not translate well to a highly compressible and anisotropic material with nonlinear time- and stress-dependent properties. This work explores the shear and frictional properties of loblolly pine at multiple experimental test apparatus and particle scales to elucidate a property window that defines the shear behavior over a range of material attributes (particle size, size distribution, moisture content, etc.). In general, it was observed that the bulk internal friction and apparent cohesion depend strongly on both the stress state of the sample in granular shear testers and the overall particle size and distribution span. For equipment designed to characterize the quasi-static shear stress failure of bulk materials ranging from 50 to 1,000 ml in test volume, similar test results were observed for finely milled particles (50% passing size of 1.4 mm) with a narrow size distribution (span between 10 and 90% passing size of 0.9 mm), while stress chaining and over-torque issues persisted for the bench-scale test apparatus for larger particle sizes or widely dispersed sample sizes. Measurement of the anisotropic particle–particle friction ranged from coefficients of approximately 0.20 to 0.45 and resulted in significantly higher and more variable friction measurements for larger particle sizes and in perpendicular alignment orientations. To supplement these laboratory-scale properties, this work explores the flow of loblolly pine and Douglas fir through a pilot-scale wedge-shaped hopper and a screw feeder. For the gravity-driven hopper flow, the critical arching distance and mass discharge rate ranged from approximately 10 to 30 mm and 2 to 16 tons/hour, respectively, for both materials, where the arching distance depends strongly on the overall particle size and depends less on the hopper inclination angle. Comparatively, the auger feeder was found to be much more impacted by the size of the particles, where smaller particles had a more consistent and stable flow while consuming less power.

09 BIOMASS FUELS↗
DOE OSTI2022

Anisotropic yield models for lattice unit cell structures exploiting orthotropic symmetry

We report numerical homogenization enables efficient computational analysis and design of multiscale structures made of micro-architected materials including lattice unit cells. However, predicting yield is nontrivial because it requires accurate and efficient predictions of the maximum stress inside the homogenized unit cells. To address this challenge, we develop a macroscale anisotropic yield function for micro-architected materials. The yield function depends on the three-dimensional macroscale stress state and the parameters describing a family of micro-architectures, such as the radii of the struts in a lattice unit cell. To ensure accuracy, we determine the maximum stress using three-dimensional continuum finite-element analysis. To ensure efficiency, we construct surrogate models from the aforementioned high-fidelity results for yield prediction. To reduce simulation costs and surrogate modeling complexity, we leverage orthotropic symmetry commonly found in lattice unit cells. In this paper, we provide a thorough presentation of group representations and the systematic procedure to exploit orthotropic domain symmetry in homogenization and surrogate modeling. We illustrate the use of linear homogenization results to predict yield in specific unit cells without further simulations. We furthermore show that surrogate modeling presents a viable option for anisotropic yield prediction in a continuously parametrized family of micro-architectures. More specifically, despite the dimensionality and degree of nonlinearity in the maximum micro von Mises stress within the unit cell, the surrogate models can predict it with less than 5% error at least 90% of the time. Moreover, the largest under-prediction error, which is more critical than the over-prediction error, is typically less than 10%.

42 ENGINEERING↗
DOE OSTI2022

Peridynamics and surrogate modeling of pressure-driven well stimulation

In this work we use the peridynamics theory of solid mechanics to simulate fracture in an annular rock domain subject to an in-situ stress and create surrogate models that predict the area of the resulting cracks. Peridynamics is a non-local formulation of continuum mechanics that naturally accommodates material discontinuities. Furthermore, unlike other fracture modeling techniques there is no need to provide information about the crack path. We utilize the peridynamics code Peridigm and take a two-stage approach to fracture modeling. First an implicit solve is performed to compute the in-situ stress state. We then execute an explicit solve where a pressure loading designed to emulate fluid-driven hydraulic fracture is applied at the borehole and transmitted to the pre-stressed rock. We present results from polynomial and single and multi-level Gaussian process surrogate models constructed from a sampling study of the peridynamics model. The surrogates predict crack area given a measure of the in-situ stress anisotropy and rise time and amplitude of the pressure loading. These surrogates take a minuscule fraction of peridynamics model's running time to evaluate and are a step towards enabling advanced optimization and uncertainty quantification workflows that require many model evaluations.

42 ENGINEERING↗
DOE OSTI2024

Acoustoelastic characterization of plates using zero group velocity Lamb modes

Acoustoelasticity, a characteristic of material anharmonicity, gives rise to a link between wave propagation velocity and the stress state in materials. Ultrasonic techniques to monitor this coupling, particularly with high sensitivity and in a noncontact manner, can have widespread application both in the quantification of applied and residual stress and in the characterization of nonlinear material behavior through measurement of higher order elastic constants. Here, we use a laser ultrasonic technique to excite and detect zero group velocity (ZGV) Lamb wave resonances in aluminum plates under uniaxial loading. A laser line source is used to excite these resonances at different orientations with respect to the applied load, and the signals are detected using an interferometer. The effects of stress and source orientation on ZGV resonance frequencies are validated using the theory of acoustoelastic Lamb wave propagation. In addition, a model-based inversion technique is used to extract Murnaghan's third-order elastic constants from measurements of the stress dependence of the first two ZGV modes generated parallel and perpendicular to the applied load. Laser generation and detection of ZGV resonances is shown to be an effective and powerful approach for the noncontact and nondestructive acoustoelastic characterization of elastic waveguides.

36 MATERIALS SCIENCE↗
DOE OSTI2025

HPC for Optimizing Process Parameters to Control Material Evolution in Seamless Induction Hardening of Wind Turbine Main Shaft Bearings

Work proposed in this project focused on understanding the effect of martensitic transformation in the steel on the potential for cracking during seamless induction hardening (SIH) as a function of process conditions to allow the process to optimally scale up. Large-scale, three-dimensional phase-field simulations of martensitic transformation were performed using MEUMAPPS-SS (Microstructure Evolution Using Massively Parallel Phase-field Simulations – Solid State) code developed at Oak Ridge National Laboratory. The simulations were guided by location-specific thermal history generated by experimental measurements of time-temperature history generated at The Timken Company. The simulations were able to capture the morphological evolution of the martensite variants in an Fe-1.0C-1.5Cr steel based on the Nishiyama-Wasserman (NW) orientation relationship. The simulations were also able to quantify the stress-state at the interface between impinging martensite variants. The simulations indicated that the magnitude of the various stress and strain components were dependent on the sizes of the impinging plates with a reduction in these quantities with reduced plate size in agreement with experimental findings. The results obtained from the simulations will be used to guide the optimization of the alloy thermal conditions to eliminate quench cracking during SIH of bearing steels.

99 GENERAL AND MISCELLANEOUS↗