On the Stability of an Equilibrium State for the Interstellar Gas and Magnetic Field
Stability of simple equilibrium periodic system for interstellar gas and magnetic field
INTERSTELLAR GAS↗
SEARCH · Engineering Papers
Results for “stabilizer states”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Stability of the Steady State and Bistable Response of a Flexible Rotor Supported on Squeeze Film Dampers
The stability of the steady state response, the bistable response, and the jumping characteristics are analyzed for the case when a system accelerates or decelerates through the bistable region of a flexible rotor-centralized squeeze film damper system. It was found that the system steady state responses have two unstable regions. The larger the unbalance parameter and the smaller the bearing parameter and the external damping ratio, the easier it is for the system to lose stability. The larger the mass ratio and the smaller the stiffness ratio, the lower the threshold rotating speed of instability. The instability of the system steady-state response determined here is due to the system nonsynchronous response in many cases.
Meng, Guang↗
Theoretical study of the Alfven eigenmode stability in CFETR steady state discharges
The aim of this study is to analyze the stability of Alfven eigenmodes (AE) in the China Fusion Engineering Test Reactor (CFETR) plasma for steady state operations. The analysis is done using the gyro-fluid code FAR3d including the effect of the acoustic modes, EP finite Larmor radius damping effects and multiple energetic particle populations. Two high poloidal β scenarios are studied with respect to the location of the internal transport barrier (ITB) at r/a ≈ 0.45 (case A) and r/a ≈ 0.6 (case B). Both operation scenarios show a narrow TAE gap between the inner-middle plasma region and a wide EAE gap all along the plasma radius. In this work, the AE stability of CFETR plasmas improves if the ITB is located inwards, case A, showing AEs with lower growth rates with respect to the case B. The AEs growth rate is smaller in the case A because the modes are located in the inner-middle plasma region where the stabilizing effect of the magnetic shear is stronger with respect to the case B. Multiple EP populations effects (NBI driven EP + alpha articles) are negligible for the case A, although the simulations for the case B show a stabilizing effect of the NBI EP on the n = 1 BAE caused by α particles during the thermalization process. If the FLR damping effects are included in the simulations, the growth rate of the EAE/NAE decreases up to 70%, particularly for n > 3 toroidal families. Low n AEs (n < 6) show the largest growth rates. On the other hand, high n modes (n = 6 to 15) are triggered in the frequency range of the NAE, strongly damped by the FLR effects.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Optimization Stability in Excited-State-Specific Variational Monte Carlo
Here, we investigate the issue of optimization stability in variance-based state-specific variational Monte Carlo, discussing the roles of the objective function, the complexity of wave function ansatz, the amount of sampling effort, and the choice of minimization algorithm. Using a small cyanine dye molecule as a test case, we systematically perform minimizations using variants of the linear method as both a standalone algorithm and in a hybrid combination with accelerated descent. We demonstrate that adaptive step control is crucial for maintaining the linear method's stability when optimizing complicated wave functions and that the hybrid method enjoys both greater stability and minimization performance.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanical Milling – Induced Microstructure Changes in Argyrodite LPSCl Solid-State Electrolyte Critically Affect Electrochemical Stability
Microstructure of argyrodite solid-state electrolyte (SSE) critically affects lithium metal electrodeposition/dissolution. While the stability of unmodified SSE is mediocre, once optimized state-of-the-art electrochemical performance is achieved (symmetric cells, full cells with NMC811) without secondary interlayers or functionalized current collectors. Planetary mechanical milling in wet media (m-xylene) is employed to alter commercial Li 6 PS 5 Cl (LPSCl) powder. Quantitative stereology demonstrates how milling progressively refines grain and pore size/distribution in the SSE compact, increases its density, and geometrically smoothens the SSE-Li interface. Mechanical indentation demonstrates that these changes lead to reduced site-to-site variation in the compact's hardness. Milled microstructures promote uniform early-stage electrodeposition on foil collectors and stabilize solid electrolyte interphase (SEI) reactivity. Analysis of half-cells with bilayer electrolytes demonstrates the importance of microstructure directly contacting current collector, with interface roughness due to pore and grain size distribution being key. For the first time, short-circuiting Li metal dendrite is directly identified, employing 1.5 mm diameter “mini” symmetrical cell and cryogenic focused ion beam (cryo-FIB) electron microscopy. The branching sheet-like dendrite traverses intergranularly, filling the interparticle voids and forming an SEI around it. Importantly, mesoscale modeling reveals the relationship between Li-SSE interface morphology and the onset of electrochemical instability, based on underlying reaction current distribution.
25 ENERGY STORAGE↗
Kinetic Effects of Anion Clusters on the Interfacial Stability between Solid-State Electrolyte and Metal Anode
The success of all-solid-state batteries (ASSBs) depends on the solid-state electrolyte (SSE) exhibiting high interfacial stability and room-temperature ionic conductivity. However, the current SSEs, especially those with practical ionic conductivities (≥10 –3 S/cm) at room temperature, often develop unstable interfaces at the metal anode, in some cases with even greater severity than with liquid organic electrolytes. Despite persistent efforts, achieving interfacial stability and sufficient ionic conductivity simultaneously represents one of the greatest challenges in ASSBs. The current approaches focus on stabilizing the interface by incorporating secondary interlayers or introducing coatings by surface engineering. The method is often material-specific, and the added interlayers often deteriorate during cycling. In this work, using phase analysis and explicit interface modeling, we demonstrate a strategy to kinetically stabilize the interface between the SSE and metal anode by incorporating selected monoanion clusters in the SSE; they can effectively lower or even halt the reduction kinetics at the interface by promoting on-site formation of interphases that are highly electron insulating. The study provides insight into the kinetic effects to achieve SSEs with superior properties in bulk and at the interface.
25 ENERGY STORAGE↗
ADAPTIVE STATE VECTOR CONTROL, SECTION 9. ADAPTIVE CONTROLLERS DERIVED BY STABILITY CONSIDERATIONS
Adaptive state vector control, section 9, adaptive controllers derived by stability considerations
STABILITY↗
A Quantum Computational Determination of the Weak Mixing Angle in the Standard Model
The weak mixing angle $s_W$ is a fundamental constant in the Standard Model (SM) and measured at the $Z$ boson mass to be $\widehat{s}^2_W(m_Z) = 0.23129 \pm 0.00004$ in the $\overline{\rm MS}$ renormalization scheme, where $m_Z=91.2\ \text{GeV}$. On the other hand, non-stabilizerness - the magic - characterizes the computational advantage of a quantum system over classical computers. We consider the production of magic from stabilizer initial states, which carry zero magic, in the 2-to-2 scattering of charged leptons in the SM at the tree level, which is mediated by the photon and the $Z$ boson. Using the second order stabilizer Rényi entropy, and averaging over all 60 initial stabilizer states and the scattering angle, we compute and minimize the magic production as a function of $s^2_W$ in the Møller scattering $e^-e^-\to e^-e^-$, which is free of kinematic thresholds. At the centre-of-mass energy $\sqrt{s}=m_Z$, there is a unique minimum in magic production at $\mathbf{s}^{2}_W(m_Z)=0.2317$, which agrees with the measured $\widehat{s}^2_W(m_Z)$ at the sub-percent level. At higher energies, the magic-minimizing $\mathbf{s}^{2}_W$ continues to agree with the empirical value at the percent level or better, up to 10 TeV. The finding suggests the electroweak sector of the SM tends to generate minimal quantum resources from the computational viewpoint.
Liu, Qiaofeng [Northwestern U.]↗
A Quantum Computational Determination of the Weak Mixing Angle in the Standard Model
The weak mixing angle $s_W$ is a fundamental constant in the Standard Model (SM) and measured at the $Z$ boson mass to be $\widehat{s}^2_W(m_Z) = 0.23129 \pm 0.00004$ in the $\overline{\rm MS}$ renormalization scheme, where $m_Z=91.2\ \text{GeV}$. On the other hand, non-stabilizerness - the magic - characterizes the computational advantage of a quantum system over classical computers. We consider the production of magic from stabilizer initial states, which carry zero magic, in the 2-to-2 scattering of charged leptons in the SM at the tree level, which is mediated by the photon and the $Z$ boson. Using the second order stabilizer Rényi entropy, and averaging over all 60 initial stabilizer states and the scattering angle, we compute and minimize the magic production as a function of $s^2_W$ in the Møller scattering $e^-e^-\to e^-e^-$, which is free of kinematic thresholds. At the centre-of-mass energy $\sqrt{s}=m_Z$, there is a unique minimum in magic production at $\mathbf{s}^{2}_W(m_Z)=0.2317$, which agrees with the measured $\widehat{s}^2_W(m_Z)$ at the sub-percent level. At higher energies, the magic-minimizing $\mathbf{s}^{2}_W$ continues to agree with the empirical value at the percent level or better, up to 10 TeV. The finding suggests the electroweak sector of the SM tends to generate minimal quantum resources from the computational viewpoint.
Liu, Qiaofeng [Northwestern U.]↗
A Quantum Computational Determination of the Weak Mixing Angle in the Standard Model
The weak mixing angle $s_W$ is a fundamental constant in the Standard Model (SM) and measured at the $Z$ boson mass to be $\widehat{s}^2_W(m_Z) = 0.23129 \pm 0.00004$ in the $\overline{\rm MS}$ renormalization scheme, where $m_Z=91.2\ \text{GeV}$. On the other hand, non-stabilizerness - the magic - characterizes the computational advantage of a quantum system over classical computers. We consider the production of magic from stabilizer initial states, which carry zero magic, in the 2-to-2 scattering of charged leptons in the SM at the tree level, which is mediated by the photon and the $Z$ boson. Using the second order stabilizer Rényi entropy, and averaging over all 60 initial stabilizer states and the scattering angle, we compute and minimize the magic production as a function of $s^2_W$ in the Møller scattering $e^-e^-\to e^-e^-$, which is free of kinematic thresholds. At the centre-of-mass energy $\sqrt{s}=m_Z$, there is a unique minimum in magic production at $\mathbf{s}^{2}_W(m_Z)=0.2317$, which agrees with the measured $\widehat{s}^2_W(m_Z)$ at the sub-percent level. At higher energies, the magic-minimizing $\mathbf{s}^{2}_W$ continues to agree with the empirical value at the percent level or better, up to 10 TeV. The finding suggests the electroweak sector of the SM tends to generate minimal quantum resources from the computational viewpoint.
Liu, Qiaofeng [Northwestern U.]↗
Reduced conservatism in stability robustness bounds by state transformation
This note addresses the issue of 'conservatism' in the time domain stability robustness bounds obtained by the Liapunov approach. A state transformation is employed to improve the upper bounds on the linear time-varying perturbation of an asymptotically stable linear time-invariant system for robust stability. This improvement is due to the variance of the conservatism of the Liapunov approach with respect to the basis of the vector space in which the Liapunov function is constructed. Improved bounds are obtained, using a transformation, on elemental and vector norms of perturbations (i.e., structured perturbations) as well as on a matrix norm of perturbations (i.e., unstructured perturbations). For the case of a diagonal transformation, an algorithm is proposed to find the 'optimal' transformation. Several examples are presented to illustrate the proposed analysis.
Yedavalli, R. K.↗
A State-Space Model for Stability Boundary Analysis of Grid-Following Voltage Source Converters Considering Grid Conditions
With the growing significance of renewable energy resources and energy storage systems, the number of grid-connected inverters has been rising at an increasingly rapid pace. Generally, these inverters are directly integrated with the distribution network by synchronizing with the grid voltage at the point of common coupling. However, the low grid strength and varying R/X ratios, as the common characteristics of most distribution networks or weak grids, can lead to dynamic interactions that comprise stability and limit the power transfer capacity of grid-connected inverters. To ensure stable operation of the inverters, researchers must determine the stability boundary, described as the maximum power transfer capacity of grid-connected inverters under the premise of maintaining system small-signal stability. For this purpose, we propose to formulate a state-space model of the system in the synchronously rotating dq-frame of reference and perform eigenvalue analysis to determine the stability boundary. With a detailed model of the control structure and parameters of the grid-connected inverters, the stability boundary is identified as a surface with respect to different grid strengths and R/X ratios. Case study results of proposed eigenvalue analysis are compared with those of admittance model-based stability analysis as well as time-domain simulation using a switching model in Matlab/Simulink, validating the effectiveness and accuracy of the proposed eigenvalue analysis for stability boundary identification.
grid-connected inverters↗
State-vector control applied to lateral stability of high-performance aircraft
State vector control applied to problem of lateral stability augmentation of high performance aircraft
STABILITY AUGMENTATION↗
Prediction of exotic magnetic states in the alkali-metal quasi-one-dimensional iron selenide compound Na 2 FeSe 2
The magnetic and electronic phase diagram of a model for the quasi-one-dimensional alkali-metal iron selenide compound Na 2 FeSe 2 is presented. The novelty of this material is that the valence of iron is Fe 2+ , contrary to most other iron-chain compounds with valence Fe 3+ . Using first-principles techniques, we developed a three-orbital tight-binding model that reproduces the ab initio band structure near the Fermi level. Including Hubbard and Hund couplings and studying the model via the density-matrix renormalization group and Lanczos methods, we constructed the ground-state phase diagram. A robust region where the block state ↑↑↓↓↑↑↓↓ is stabilized was unveiled. The analog state in iron ladders, employing 2×2 ferromagnetic blocks, is by now well established, but in chains a block magnetic order has not been observed yet in real materials. The phase diagram also contains a large region of canonical staggered spin order ↑↓↑↓↑↓↑ at very large Hubbard repulsion. At the block-to-staggered transition region, an exotic phase is stabilized with a mixture of both states: an inhomogeneous orbital-selective charge density wave with the exotic spin configuration ↑↑↓↑↓↓↑↓. Our predictions for Na 2 FeSe 2 may guide crystal growers and neutron-scattering experimentalists towards the realization of block states in one-dimensional iron selenide chain materials.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Radioactive nuclear waste stabilization - Aspects of solid-state molecular engineering and applied geochemistry
Stabilization techniques for the storage of radioactive wastes are surveyed, with emphasis on immobilization in a primary barrier of synthetic rock. The composition, half-life, and thermal-emission characteristics of the wastes are shown to require thermally stable immobilization enduring at least 100,000 years. Glass materials are determined to be incapable of withstanding the expected conditions, average temperatures of 100-500 C for the first 100 years. The geological-time stability of crystalline materials, ceramics or synthetic rocks, is examined in detail by comparing their components with similar naturally occurring minerals, especially those containing the same radioactive elements. The high-temperature environment over the first 100 years is seen as stabilizing, since it can recrystallize radiation-induced metamicts. The synthetic-rock stabilization technique is found to be essentially feasible, and improvements are suggested, including the substitution of nepheline with freudenbergite and priderite for alkaline-waste stabilization, the maintenance of low oxygen fugacity, and the dilution of the synthetic-rock pellets into an inert medium.
Haggerty, S. E.↗
On the stability of an equilibrium state for the interstellar gas and magnetic field.
Interstellar gas and magnetic field periodic system stability noting free-fall time
DYNAMIC STABILITY↗
Comparing Interval Management Control Laws for Steady-State Errors and String Stability
Interval Management (IM) is a future airborne spacing concept that leverages avionics to provide speed guidance to an aircraft to achieve and maintain a specified spacing interval from another aircraft. The design of a speed control law to achieve the spacing goal is a key aspect in the research and development of the IM concept. In this paper, two control laws that are used in much of the contemporary IM research are analyzed and compared to characterize steady-state errors and string stability. Numerical results are used to illustrate how the choice of control laws gains impacts the size of steady-state errors and string performance and the potential trade-offs between those performance characteristics.
Weitz, Lesley A.↗
Software Control Program For Transportable Microgrid State-of-charge Balancing And Frequency Stability Controls
A deterministic state-of-charge (SOC) balancing approach software control code is introduced as an integral secondary management to primary control layer of an islanded small microgrid or nanogrid system made up of multiple grid-forming inverter/battery/solar combination systems, where each set of batteries with each inverter are on independent DC buses (i.e. non-paralleled on the DC sides). A DERMS-level control approach, algorithm and automation controller program was developed to improve coordination and enable microgrid asset compliance and SOC balancing, enabling provision of a system-level power stability support architecture, load support, and asset scalability. The architecture is configured to treat each unit or micro/nano-grid as a node in a microgrid network, allowing for autonomous DERMS control regarding load and SOC balancing and power stability. As the network grows with the addition of units, greater coordination efforts may be required. The ideal small network microgrid ranges from 2-10 inverter/battery units before additional control parameters must be considered in the existing architecture. The control approach focuses on a deterministic state-of-charge analysis as the primary level control process followed by a secondary control loop using a forced frequency-watt droop strategy to conform off-the-shelf components into behaving under a leader-follower configuration. Adopting this control scheme has been shown to allow for a balanced, unit-coordinated microgrid network, enabling stable power flow. The deterministic state-of-charge approach is introduced as an integral primary control layer of an islanded small network microgrid. A standard strategy for SOC balancing is implementing a battery management system (BMS) to control SOC on the DC side. An alternative approach is to determine how to coordinate sending and receiving power on the AC side with multiple units. The latter approach assesses all the integrated units in the microgrid network. Once the individual units are identified, further system data is required to calculate each unit's total kWh, provided information about its capability to supply or consume kWh and availability. The secondary control layer in the multi-layered small network microgrid methodology uses the primary layer’s decision to initiate frequency setpoint changes, initializing the SOC balancing. The secondary control layer considers numerous system-dependent variables to enable a charging and discharging profile based on adjustable frequency setpoints. The combined architecture will result in stable, coordinated power flow enhancing an AC microgrid's functionalities.
Myers, KurtS [Idaho National Laboratory (INL), Ida↗