Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “short-range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Effect of pointing errors and range on performance of dual-pencil-beam scatterometers

Short-range FM scatterometers with single antennas are plagued by interference set up by feedthrough and internal reflections. Dual-antenna systems have much lower internal interference, but there are problems associated with pointing the antennas at the same spot. This note quantifies these problems for Gaussian-shaped beams. The use of antennas with beamwidth ratios of up to 5:1 is shown to improve performance significantly over that obtained with identical beamwidths. For an angle between antenna centers (as viewed from the beam intersection) that is three times the beamwidth of the narrower antenna, the usable spread of range for equal beamwidths is only about 1.85:1, while for an angular ratio of 5, the usable spread of range is greater than 20:1.

Moore, R. K.↗

Identification of major backscattering sources in trees and shrubs at 10 GHz

A short-range very-fine-resolution FM-CW radar scatterometer has been used to identify the primary contributors to 10-GHz radar backscatter from pine, pin oak, American sycamore and sugar maple trees, and from creeping juniper shrubs. This system provided a range resolution of 11 cm and gave a 16-cm diameter illumination area at the target range of about 4 m. For a pine tree, the needles caused the strongest backscatter as well as the strongest attenuation in the radar signal. Cones, although insignificant contributors to the total backscatter, were more important for backscattering than for attenuation. For the rest of the trees, leaves were the strongest cause of backscattering and attenuation. However, in the absence of leaves, the petioles, small twigs, and branches gave relatively strong backscatter. For American sycamore and sugar maple trees, the fruits did not affect the total backscatter unless they were packed in clusters. For creeping juniper the backscattered energy and attenuation in the radar signal were mainly due to the top two layers of the evergreen scales. The contribution of the tree trunks was not determined.

Zoughi, R.↗

Nonlocal screening in metal surfaces

Due to the effect of the nonuniform environment on the static screening of the Coulomb potential, the local-density approximation for the particle-hole interaction is found to be inadequate to determine the surface energy of simple metals. Use of the same set of single-particle states, and thus the same one-body density and the same work function, has eliminated the single-electron states in favor of the structure of the short-ranged correlations as the basis of this effect. A posteriori simplifications of the Fermi hypernetted-chain theory may be found to allow the same calculational accuracy with simpler computational tools.

Krotscheck, E.↗

Simulation experiments for testing the assimilation of geostationary satellite temperature retrievals into a numerical prediction model

A simulation experiment is presented which tests a procedure that assimilates temperature soundings from geostationary satellites using a method developed by Gal-Chen (1983). The simulation is used to decide whether the increased temporal resolution of geostationary satellite data can be used to improve numerical simulation of a baroclinically unstable wave, and to assess the impact of gaps in the satellite sounding fields on the model simulations. Background information on the simulation experiment is presented, including discussion of the variational approach utilized, the numerical model, updating procedures, and control run. The simulation results indicate that, for the case of a baroclinically unstable wave, considerable improvements in the short-range forecast may be realized if geostationary satellite data are inserted with a frequency near 1 hr during a 6 hr analysis cycle compared with a single insertion.

Gal-Chen, T.↗

The combined use of diagnosed mesoscale frontogenesis and satellite imagery in forecasting squall line formation

The appearance of a line of small cumulus congestus clouds along a cold front in conjunction with developing mesoscale clear zone immediately behind the front was used to infer the existence of a meso-Beta-scale frontogenetical circulation capable of squall line initiation. The very short-range forecasting (2 to 6 hr) capabilities of synthesizing GOES imagery with diagnostic frontogenesis analyses of conventional surface data to predict the precise location and time of formation of such convective activity is demonstrated. The observations support the frontogenesis hypothesis postulated by Koch (1984).

Dorian, Paul↗

Minimum Energy Routing through Interactive Techniques (MERIT) modeling

The MERIT program is designed to demonstrate the feasibility of fuel savings by airlines through improved route selection using wind observations from their own fleet. After a discussion of weather and aircraft data, manually correcting wind fields, automatic corrections to wind fields, and short-range prediction models, it is concluded that improvements in wind information are possible if a system is developed for analyzing wind observations and correcting the forecasts made by the major models. One data handling system, McIDAS, can easily collect and display wind observations and model forecasts. Changing the wind forecasts beyond the time of the most recent observations is more difficult; an Australian Mesoscale Model was tested with promising but not definitive results.

Wylie, Donald P.↗

Electron Diffraction Evidence for the Ordering of Excess Nickel Atoms by Relation to Stoichiometry in Nickel-Rich Beta'-Nial Formation of a Nickel-Aluminum (Ni2al) Superlattices

In electron diffraction patterns of nickel-rich beta-NiAl alloys, many anomalies are observed. One of these is the appearance of diffuse intensity maxima between the reflexions of the B2 structure. This is explained by the short-range ordering of the excess nickel atoms on the simple cubic sublattice occupied only by aluminum atoms in the stoichiometric, perfectly ordered NiAl alloy. After annealing Ni 37.5 atomic percent Al and Ni 37.75 atomic percent Al for 1 week at 300 and 400 C, the diffuse intensity maxima transformed into sharp superstructure reflexions. These reflexions are explained by the formation of the four possible variants of an ordered hexagonal superstructure corresponding to the Ni2Al composition. This structure is closely related to the Ni2Al3 structure (same space group) formed by the ordering of vacancies on the nickel sublattice in aluminum-rich beta-NiAl alloys.

Reynaud, F.↗

Comparison between muon spin rotation and neutron scattering studies on the 3-dimensional magnetic ordering of La2CuO(4-y)

Muon spin rotation and neutron scattering studies on powder and single-crystal specimens of La2CuO(4-y) are compared. The apparent difference between the muon and neutron results for the ordered moment in the antiferromagnetic state is interpreted as the signature of increasingly short-ranged spatial spin correlations with increasing oxygen content.

Uemura, Y. J.↗

Bracknell Meteorological Office

The Bracknell (U.K.) Meteorological Office runs a global weather model twice a day, providing the following data: surface and radiosonde; aircraft reports; and satellite soundings and wind. A human forecast is made every six hours. The model runs on a 150 km grid with 15 levels, and takes about four minutes on a Cyber-205. The standard output from the global products are wind, temperature, height, tropopause, and maximum wind. Various experiments have been conducted to see if short-range forecasters could improve on the upper-wind forecasts over the numerical model; the numerical model remains of paramount importance. Small-scale models are being run in the U.S. and the U.K. A fine-mesh model covers Europe and the Atlantic. A mesoscale model is under development. A great deal of verification work is done to see how good the models are.

Flood, Colin R.↗

Special observations

The wind or temperature profiler is a new special observation device designed to supplement traditional atmospheric measurement and provide more accurate middle-range forecasts, including aviation and space applications. Radar is most useful in the short, nowcast time frame. Satellites and surface observations are also most useful for short-range forecasts but have less impact on the longer range. The radiosonde network, on the other hand, only starts to be very important after about six hours and has greatest impact at lead times of 12 hours or more. In the wind profiler, wind is measured by using clear-air Doppler radar principles, Two fixed beams, pointing 15 deg to the north and 15 deg to the east, sense the Doppler shift. The resulting wind vectors are then rotated to the horizontal and combined to give total wind. The temperature profiler measures temperature and humidity by using passive radiometers. Development on the profiler is 95 percent complete, and on the temperature profiler 75 percent complete.

Beran, Donald↗

Experimental correlation of melt structures, nucleation rates, and thermal histories of silicate melts

The theory and measurement of the structure of liquids is an important aspect of modern metallurgy and igneous petrology. Liquid structure exerts strong controls on both the types of crystals that may precipitate from melts and on the chemical composition of those crystals. An interesting aspect of melt structure studies is the problem of melt memories; that is, a melt can retain a memory of previous thermal history. This memory can influence both nucleation behavior and crystal composition. This melt memory may be characterized quantitatively with techniques such as Raman, infrared and NMR spectroscopy to provide information on short-range structure. Melt structure studies at high temperature will take advantage of the microgravity conditions of the Space Station to perform containerless experiments. Melt structure determinations at high temperature (experiments that are greatly facilitated by containerless technology) will provide invaluable information for materials science, glass technology, and geochemistry. In conjunction with studies of nucleation behavior and nucleation rates, information relevant to nucleation in magma chambers in terrestrial planets will be acquired.

Boynton, W. V.↗

Apollo 14 mare basalt petrogenesis - Assimilation of KREEP-like components by a fractionating magma

Based on analysis of whole rock and mineral data from 22 samples, it is shown that the trace element characteristics of 14321 high-AL mare basalts exhibit variations that cannot be related to short-range mixing alone. It is suggested that the five groups defined for Apollo 14 high-Al basalts are due to sampling. It is found that the addition of new data results in a continuum of compositions. Detailed trace element modeling demonstrates that a primitive parental magma evolves by assimilation and fractional crystallization (AFC) with KREEP. The ratio of mass assimilated to mass crystallized is found to be 0.22. It is suggested that this AFC process occurs within the lunar crust and that the fractionating phases are effectively removed from the system.

Neal, Clive R.↗

Chemical dispersion among Apollo 15 olivine-normative mare basalts

Analysis of Apollo 15 olivine-normative mare basalts for major and minor elements suggests that the hypothesis that the coarser-grained varieties (olivine microgabbros) consist of two chemical groups is incorrect. Instead, it is found that there is a single group including vesicular, coarse-grained, and fine-grained basalts. For the entire suite, the dispersion of compositions along the olivine trend is too great to be explained by short-range unmixing of an unfractionated flow. It is suggested that the general trend for the suite is olivine separation, probably through crystal settling. The textures, mineralogical characteristics, and chemical variation of the olivine-normative basalts are shown to be consistent with a sequence of thin fractionating flows, all from a common parent.

Ryder, Graham↗

Mesoscale modeling of the severe thunderstorm environment

The abilities of limited-area mesoscale models to provide accurate predictions of the environment of midlatitude severe thunderstorms and the possible feedback effects of the storms upon their environment are reviewed. Mesoaplha-scale models, mesobeta models, and terrain-induced mesoscale systems are discussed. The importance of the initial state and model numerics and physics is examined. It is found that mesoscale models must be run locally if they are to be used for short-range forecasting.

Koch, Steven E.↗

Use of four-dimensional data assimilation by Newtonian relaxation and latent-heat forcing to improve a mesoscale-model precipitation forecast - A case study

The Penn State/NCAR mesoscale model was used to study special static-initialization (SI) and dynamic-initialization (DI) techniques designed to improve short-range quantitative precipitation forecasts (QPFs), as applied to the heavy convective rainfall that occurred in Texas, Oklahoma, and Kansas during the May 9-10, 1979 SESAMY IV study period. In the DI procedure, two types of four-dimensional data assimilation (FDDA) procedures were used to incorporate data during a 12-h preforecast period, one using the Newtonian relaxation, the other using latent-heat forcing. It was found that combined use of either the preforecast or in-forecast latent-heat forcing with the Newtonian relaxation produced an improved forecast (relative to a conventional forecast procedure) of rainfall intensity compared to the use of the Newtonian relaxation alone. The use of the experimental SI with prescribed latent heating during the first forecast hour produced greatly improved rainfall rates.

Wang, Wei↗

Measurement of sound emitted by flying projectiles with aeroacoustic sources

Training projectiles with axisymmetric ring cavities that produce intense tones in an airstream were shot in a straight-line trajectory. A ground-based microphone was used to obtain the angular distribution of sound intensity produced from the flying projectile. Data reduction required calculation of Doppler and attenuation factors. Also, the directional sensitivity of the ground-mounted microphone was measured and used in the data reduction. A rapid angular variation of sound intensity produced from the projectile was found that can be used to plot an intensity contour map on the ground. A full-scale field test confirmed the validity of the aeroacoustic concept of producing a relatively intense whistle from the projectile, and the usefulness of short-range flight tests that yield acoustic data free of uncertainties associated with diffraction, reflection, and refraction at jet boundaries in free-jet tests.

Cho, Y. I.↗

A preliminary study of a propeller powered by gas jets issuing from the blade tips

Computations are made of the performance of a propeller designed to develop 56 thrust horsepower at 100 miles per hour. The fuel consumption of the jet-operated propeller would be considerably higher than that of a reciprocating engine and a propeller. The lighter weight of the jet-operated propeller will result in a lighter weight of engine plus fuel for short-range flights. A theoretical analysis is made of a propeller powered by gas jets issuing from the blade tips. In the propeller considered, the air is drawn through the hub and passes through the hollow propeller blades to the tips, where propellers heat the air and expel it through the nozzles in the blade tips. The reaction of the tips rotates the propeller. For long range flights, the weight of the jet-operated propeller with its fuel would be greater than the weight of a reciprocating engine with its propeller and fuel.

Sanders, J C↗

Firefighters' Radios

Public Technology Inc. asked for NASA assistance to devise the original firefighter's radio. Good short-range radio communications are essential during a fire to coordinate hose lines, rescue victims, and otherwise increase efficiency. Useful firefighting tool is lower cost, more rugged short range two-way radio. Inductorless electronic circuit replaced inductances and coils in radio circuits with combination of transistors and other low-cost components. Substitution promises reduced circuit size and cost. Enhanced electrical performance made radio more durable and improved maintainability by incorporating modular construction.

Source record↗