Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock simulation test”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

NASA Ames's electric arc-driven shock tube facility and research on nonequilibrium phenomena in low density hypersonic flows

Basic requirements for a ground test facility simulating low density hypersonic flows are discussed. Such facilities should be able to produce shock velocities in the range of 10-17 km/sec in an initial pressure of 0.010 to 0.050 Torr. The facility should be equipped with diagnostics systems to be able to measure the emitted radiation, characteristic temperatures and populations in various energy levels. In the light of these requirements, NASA Ames's electric arc-driven low density shock tube facility is described and available experimental diagnostics systems and computational tools are discussed.

Sharma, Surendra P.↗

Hypersonic lateral and directional stability characteristics of aeroassist flight experiment configuration in air and CF4

Hypersonic lateral and directional stability characteristics measured on a 60 deg half-angle elliptical cone, which was raked at an angle of 73 deg from the cone centerline and with an ellipsoid nose (ellipticity equal to 2.0 in the symmetry plane), are presented for angles of attack from -10 to 10 deg. The high normal-shock density ratio of a real gas was simulated by tests at a Mach number of 6 in air and CF4 (density ratio equal to 5.25 and 12.0, respectively). Tests were conducted in air at Mach 6 and 10 and in CF4 at Mach 6 to examine the effects of Mach number, Reynolds number, and normal-shock density ratio. Changes in Mach number from 6 to 10 in air or in Reynolds number by a factor of 4 at Mach 6 had a negligible effect on lateral and directional stability characteristics. Variations in normal-shock density ratio had a measurable effect on lateral and directional aerodynamic coefficients, but no significant effect on lateral and directional stability characteristics. Tests in air and CF4 indicated that the configuration was laterally and directionally stable through the test range of angle of attack.

Micol, John R.↗

Hot-jet simulation in cryogenic wind tunnels

In order to evaluate hot jet simulation capability in cryogenic wind tunnel testing, simple theoretical calculations were performed. The similarity parameters, isentropic flow properties, and normal shock relations were calculated for a variety of jet simulation techniques. The results were compared with those estimated for a full scale flight condition. It was shown that the cryogenic wind tunnel testing provides an opportunity for the most accurate hot jet simulation technique. By using a compressed nitrogen gas at ambient or moderately elevated temperatures as a jet gas, most all of the relevant similarity parameters including the jet temperature and velocity ratios and the Reynolds numbers, can be set to the full scale flight values. The only exception is the ratio of specific heats for jet flow. In an attempt to match the ratio of specific heats for the turbojet flow, gases other than pure nitrogen were considered. It was found that a nitrogen/methane mixture at moderately elevated temperature behaves like the real combustion gas. Using this mixture as a jet gas, complete simulation of the full scale turbojet exhaust becomes possible in cryogenic wind tunnels.

Asai, Keisuke↗

Flow establishment in a generic scramjet combustor

The establishment of a quasi-steady flow in a generic scramjet combustor is studied for the case of a time varying inflow to the combustor. Such transient flow is characteristic of the reflected-shock tunnel and expansion-tube test facilities. Several numerical simulations of hypervelocity flow through a straight-duct combustor with either a side-wall-step fuel injector or a centrally-located strut injector are presented. Comparisons are made between impulsively started but otherwise constant flow conditions (typical of the expansion-tube or tailored operation of the reflected-shock tunnel) and the relaxing flow produced by the 'undertailored' operation of the reflected-shock tunnel. Generally the inviscid flow features, such as the shock pattern and pressure distribution, were unaffected by the time varying inlet conditions and approached steady state in approximately the times indicated by experimental correlations. However, viscous features, such as heat transfer and skin friction, were altered by the relaxing inlet flow conditions.

Jacobs, P. A.↗

Investigation on oblique shock wave control by arc discharge plasma in supersonic airflow

Wedge oblique shock wave control by arc discharge plasma in supersonic airflow was investigated theoretically, experimentally, and numerically in this paper. Using thermal choking model, the change in oblique shock wave was deduced, which refer that the start point of shock wave shifts upstream, the shock wave angle decreases, and its intensity weakens. Then the theoretical results were validated experimentally in a Mach 2.2 wind tunnel. On the test conditions of arc discharge power of approx1 kW and arc plasma temperature of approx3000 K, schlieren photography and gas pressure measurements indicated that the start point of shock wave shifted upstream of approx4 mm, the shock wave angle decreased 8.6%, and its intensity weakened 8.8%. The deduced theoretical results match the test results qualitatively, so thermal mechanism and thermal choking model are rational to explain the problem of oblique shock wave control by arc discharge plasma. Finally, numerical simulation was developed. Based on thermal mechanism, the arc discharge plasma was simplified as a thermal source term that added to the Navier-Stokes equations. The simulation results of the change in oblique shock wave were consistent with the test results, so the thermal mechanism indeed dominates the oblique shock wave control process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical simulation of experiments in the Giant Planet Facility

Utilizing a series of existing computer codes, ablation experiments in the Giant Planet Facility are numerically simulated. Of primary importance is the simulation of the low Mach number shock layer that envelops the test model. The RASLE shock-layer code, used in the Jupiter entry probe heat-shield design, is adapted to the experimental conditions. RASLE predictions for radiative and convective heat fluxes are in good agreement with calorimeter measurements. In simulating carbonaceous ablation experiments, the RASLE code is coupled directly with the CMA material response code. For the graphite models, predicted and measured recessions agree very well. Predicted recession for the carbon phenolic models is 50% higher than that measured. This is the first time codes used for the Jupiter probe design have been compared with experiments.

Green, M. J.↗

Aero-thermal numerical characterization of blunt fin-induced shock wave–boundary layer interaction and its control through leading-edge cooling injection

This study represents a novel evaluation of active flow control to alleviate the aerothermal penalties created by the blunt fin-induced shock wave–boundary layer interaction. The manuscript analyzes the effect of flow injection on a blunt fin-induced shock wave–boundary layer interaction via computational fluid dynamics simulations with various degrees of resolution. The impact on the mean flow topology and wall variables was investigated utilizing Reynolds-averaged Navier–Stokes simulations. Detached-eddy simulations revealed the low-frequency shock motion, shock wave–boundary layer, and horseshoe vortex interaction. The test article was exposed to two different incoming boundary layer thicknesses; the thicker boundary layer led to the appearance of larger turbulent scales. The Detached-eddy simulations revealed the time history of the shock wave–boundary layer interaction, focusing on the inception and development of the recirculated flow regions. Ultimately, spectral proper orthogonal decomposition was employed to identify the structures associated with the low-frequency shock motion caused by the shock wave–boundary layer interaction.

Lozano, Francisco (ORCID:0000000277871125)↗

Space Launch System Base Heating Test: Environments and Base Flow Physics

The NASA Space Launch System (SLS) vehicle is composed of four RS-25 liquid oxygen-hydrogen rocket engines in the core-stage and two 5-segment solid rocket boosters and as a result six hot supersonic plumes interact within the aft section of the vehicle during flight. Due to the complex nature of rocket plume-induced flows within the launch vehicle base during ascent and a new vehicle configuration, sub-scale wind tunnel testing is required to reduce SLS base convective environment uncertainty and design risk levels. This hot-fire test program was conducted at the CUBRC Large Energy National Shock (LENS) II short-duration test facility to simulate flight from altitudes of 50 kft to 210 kft. The test program is a challenging and innovative effort that has not been attempted in 40+ years for a NASA vehicle. This paper discusses the various trends of base convective heat flux and pressure as a function of altitude at various locations within the core-stage and booster base regions of the two-percent SLS wind tunnel model. In-depth understanding of the base flow physics is presented using the test data, infrared high-speed imaging and theory. The normalized test design environments are compared to various NASA semi-empirical numerical models to determine exceedance and conservatism of the flight scaled test-derived base design environments. Brief discussion of thermal impact to the launch vehicle base components is also presented.

Mehta, Manish↗

Space Launch System Base Heating Test: Environments and Base Flow Physics

The NASA Space Launch System (SLS) vehicle is composed of four RS-25 liquid oxygen- hydrogen rocket engines in the core-stage and two 5-segment solid rocket boosters and as a result six hot supersonic plumes interact within the aft section of the vehicle during ight. Due to the complex nature of rocket plume-induced ows within the launch vehicle base during ascent and a new vehicle con guration, sub-scale wind tunnel testing is required to reduce SLS base convective environment uncertainty and design risk levels. This hot- re test program was conducted at the CUBRC Large Energy National Shock (LENS) II short-duration test facility to simulate ight from altitudes of 50 kft to 210 kft. The test program is a challenging and innovative e ort that has not been attempted in 40+ years for a NASA vehicle. This presentation discusses the various trends of base convective heat ux and pressure as a function of altitude at various locations within the core-stage and booster base regions of the two-percent SLS wind tunnel model. In-depth understanding of the base ow physics is presented using the test data, infrared high-speed imaging and theory. The normalized test design environments are compared to various NASA semi- empirical numerical models to determine exceedance and conservatism of the ight scaled test-derived base design environments. Brief discussion of thermal impact to the launch vehicle base components is also presented.

Mehta, Manish↗

The NASA Ames Aerothermodynamics Branch

The Ames Aerothermodynamics branch provides NASA and the country an integrated modeling, simulation, and test capability in the areas of aerothermodynamics, shock layer radiation, and entry system design. With roots dating back to the founding of Ames in the 1940s, the branch has contributed to every major NASA mission with an atmospheric entry component and actively partners with commercial space companies to assist with entry system development and technology transfer. This presentation provides a brief overview of the branch, its core competencies, and recent accomplishments.

Jeffrey Hill↗

Turbulent Acceleration of Interstellar Pickup Ions at the Heliospheric Termination Shock Forms the Global ENA Spectrum

The heliospheric energetic neutral atom spectrum observed by the Interstellar Boundary Explorer (IBEX) reveals that the heliosheath proton distribution is consistent with a power law. The origin of the spectrum is likely from interstellar pickup ions (PUIs) accelerated at the heliospheric termination shock (HTS). We present an explanation of the proton spectrum origin using a test particle simulation of PUIs accelerated at the HTS. PUIs experience preferential heating by the motional electric field in the shock foot, but do not develop a power-law tail without the presence of turbulence at wavenumbers (k) close to the PUI gyroradius scale (R g ). Voyager 2 observations of the magnetic field downstream of the HTS indicate a moderate amount of turbulence at kR g ≅ 1, (δB /B 0 ) 2 @ 0.01, which we find to be sufficient for producing a downstream suprathermal PUI tail but not at intensities observed by IBEX. Within the shock ramp, however, Voyager observed the turbulence power at much smaller scales to be nearly 100 times stronger, suggesting the possibility of strong turbulence at the PUI gyroradius scale. We show that a proton distribution can develop a power law downstream of the HTS consistent with IBEX observations if (δB /B 0 ) 2 ≳ 0.1 at kR g ≅ 1 in the shock foot. Shock drift acceleration of PUIs by the motional electric field is aided by interactions with turbulence upstream of the shock overshoot. Steepening of the IBEX proton spectrum in directions farther from the heliospheric nose suggests the HTS compression ratio and/or turbulence power weakens near the heliotail.

79 ASTRONOMY AND ASTROPHYSICS↗

Buffet loads on shuttle thermal-protection-system tiles

This paper presents results of wind-tunnel and acoustic tests to investigate buffet loads on Shuttle Thermal-Protection-System (TPS) tiles, It also describes the application of these results to the prediction of tile buffet loads for the first shuttle flight into orbit (STS-I). The wind-tunnel tests of tiles were conducted at transonic and supersonic Math numbers simulating flow regions on the Orbiter where shock waves and boundary-layer separations occur. The acoustic tests were conducted in a progressive wave tube at an overall sound pressure level (OASPL) approximately equal to the maximum OASPL measured during the wind-tunnel tests in a region of flow separation. The STS-I buffet load predictions yielded peak tile stresses due to buffeting, that were as much as 20 percent of the total stress for the design-load case when a shock wave was on a tile.

Charles F. Coe↗

Effects of operator splitting and low Mach-number correction in turbulent mixing transition simulations

In this paper, transition and turbulence decay with the Taylor–Green vortex have been effectively used to demonstrate emulation of high Reynolds-number ( R e ) physical dissipation through numerical convective effects of various non-oscillatory finite-volume algorithms for implicit large eddy simulation (ILES), e.g. using the Godunov-based Eulerian adaptive mesh refinement code xRAGE. The inverse-chevron shock tube experiment simulations have been also used to assess xRAGE based ILES for shock driven turbulent mixing, compared with available simulation and laboratory data. The previous assessments are extended to evaluate new directionally-unsplit high-order algorithms in xRAGE, including a correction to address the well-known issue of excessive numerical diffusion of shock-capturing (e.g., Godunov-type) schemes for low Mach numbers. The unsplit options for hydrodynamics in xRAGE are discussed in detail, followed by fundamental tests with representative shock problems. Basic issues of transition to turbulence and turbulent mixing are discussed, and results of simulations of high- R e turbulent flow and mixing in canonical test cases are reported. Finally, compared to the directional-split cases, and for each grid resolution considered, unsplit results exhibit transition to turbulence with much higher effective R e —and significantly more so with the low Mach number correction.

97 MATHEMATICS AND COMPUTING↗

OVERFLOW Analysis of Supersonic Retropropulsion Testing on a Blunt Mars Entry Vehicle Concept

Supersonic Retropropulsion (SRP) flow over a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) blunt-body vehicle was simulated using the OVERFLOW Computational Fluid Dynamics (CFD) solver. Two nozzle configurations were tested (1E and 1F) as a subset of the seven total configurations in the Descent Systems Study (DSS) testing campaign. A generalized, Adaptive Mesh Refinement (AMR) shock capturing and plume refinement technique was developed and calibrated for producing automatic and optimized grid systems unique to any given testing condition. Simulations were subjected to successive levels of grid refinement in order to determine solution independence from grid resolution. OVERFLOW Reynolds Averaged Navier-Stokes (RANS) solutions produced realistic SRP flow phenomena, including Mach disk normal shocks contained in high-thrust plumes and bow shock triple-points. Solutions for the 1E nozzle configuration were steady. Conversely, a subset of the 1F test conditions were unsteady and exhibited periodic, non-sinsoidal expansions and contractions of the streamwise-oriented plume, resulting in unsteady aerodynamic loads on the vehicle.

Supersonic Retropropulsion↗

Thermal shock resistance of lightweight cements developed for geothermal conditions

Cements are a critical component in well construction, as they act to prevent well fluid and gas escape, prevent corrosion of the casing, and strengthen the wellbore to prevent deformation. Under the high temperature/pressure conditions common in geothermal systems, the injection of cold water for energy production is expected to induce cyclic damage to the borehole cement through the rapid temperature fluctuations. These “thermal shocks” are expected to cause casing shrinkage, annulus formation, and cement tensile stresses. To understand the effect of cold water injection on the wellbore environment, a set of rock-cement-steel samples were created to simulate the structure of a geothermal well. Lightweight thermally-insulating cement blends were tested under thermal shock conditions in this study. In each test, the samples were pressurized to an effective pressure of ~3.5 MPa and placed at high temperatures. Thermal shocks were performed by injecting cold water (~10-15 °C) through the samples at a constant rate while keeping the samples at high temperatures until the sample temperature stopped decreasing and deformation ceased. Eight thermal shock tests were conducted with each sample – two at 100 °C and six at 200 °C. Post-tests analysis was then conducted by cutting open each sample to examine the damage in each component of the simulated wellbore. Experimental results suggest that all samples experienced similar degrees of axial and lateral contraction during cold water injection, but for the most part this contraction is recoverable when injection halts. Post-test analysis revealed that fly ash cenosphere pre-treatment had the best effect on improving thermal shock resistance in the cement blends. Thermomechanical modeling of likely stress paths experienced by the cements during heating/cooling cycles shows that elasto-plastic cement constitutive behavior results in most plastic strain occurring during the initial heating steps, with mostly elastic strain occurring during the thermal shock cycles. In conclusion, this agrees with experimental evidence, suggesting that cement damage from shocking occurs via other mechanisms such as chemical alteration, corrosion, and fatigue.

36 MATERIALS SCIENCE↗

DNS of strong shock and turbulence interactions with thermochemical non-equilibrium effects

The underlying physics in shock and turbulence interaction is essential for a better understanding of many natural processes as well as scientific and engineering applications, such as volcanic eruption, supernova explosion, detonation, medical application of shock wave lithotripsy to break up kidney stones, and energy application of the implosion of a cryogenic fuel capsule for inertial confinement fusion. One of the fundamental building blocks in these complex processes and applications is the canonical problem of isotropic turbulence and a normal shock. Unfortunately, even this fundamental problem is not well understood for strong shocks. Recent direct numerical simulation (DNS) results of perfect gas flow showed some new trends in turbulent statistics as mean Mach number is increased. In this paper, we first conduct extensive DNS studies on canonical strong shock and turbulence interaction problem of perfect gas flow with mean Mach numbers ranging from 2 to 30. The results show that strong shock waves have a significant effect on turbulent statistics. However, gas temperature increases dramatically after strong shocks so that numerical simulations based on perfect gas flow may not be enough. The effects of thermochemical nonequilibrium flow including internal energy excitations, translation-vibration energy relaxation, and chemical reactions among different species need to be considered. Therefore, we have developed and tested a new high-order shock-fitting solver for non-equilibrium flow simulations based on the 5-species air chemistry and recently thermal non-equilibrium models.

Wang, Xiaowen↗

A High-Order Shock-Fitting Non-Equilibrium Flow Solver for DNS of Strong Shock and Turbulence Interactions

The underlying physics in shock and turbulence interaction is essential for a better understanding of many natural processes as well as scientific and engineering applications, such as volcanic eruption, supernova explosion, detonation, medical application of shock wave lithotripsy to break up kidney stones, and energy application of the implosion of a cryogenic fuel capsule for inertial confinement fusion. One of the fundamental building blocks in these complex processes and applications is the canonical problem of isotropic turbulence and a normal shock. Unfortunately, even this fundamental problem is not well understood for strong shocks. Recent direct numerical simulation (DNS) results of perfect gas flow showed some new trends in turbulent statistics as mean Mach number is increased. In this paper, we first conduct extensive DNS studies on canonical strong shock and turbulence interaction problem of perfect gas flow with mean Mach numbers ranging from 2 to 30. The results show that strong shock waves have a significant effect on turbulent statistics. However, gas temperature increases dramatically after strong shocks so that numerical simulations based on perfect gas flow may not be enough. The effects of thermochemical nonequilibrium flow including internal energy excitations, translation-vibration energy relaxation, and chemical reactions among different species need to be considered. Therefore, we have developed and tested a new high-order shock-fitting solver for non-equilibrium flow simulations based on the 5-species air chemistry and recently thermal non-equilibrium models.

Wang, X.↗

DNS of strong shock and turbulence interaction including real gas effects

The underlying physics in strong shock and turbulence interaction is essential for better understanding of many applications in astrophysics as well as explosive processes. These strongly nonlinear phenomena, however, have proven to be very complex to understand with existing tools. Furthermore, real gas effects including internal energy excitations, translation-vibration energy relaxation, and chemical reactions among different species need to be considered in direct numerical simulation (DNS) of strong shocks, because gas temperature increases dramatically behind the shocks. To solve such problems, a unique approach of using a shock-fitting and shockcapturing method is adopted. The main shock is treated by a shock-fitting method as a sharp boundary of the computational domain. The rest of weak or secondary shocks induced by interactions of the main shock and freestream turbulence are captured by shock-capturing schemes. In this paper, a high-order nonequilibrium flow solver based on 5-species air chemistry and recently thermal property models are implemented and tested. The test of 11-species air chemistry is ongoing, where the ionization of gas particles is considered. The solver is being applied to simulate strong shock and turbulence interaction problems with the main shock Mach number around 20. The paper mainly focuses on the numerical method and results of a test case.

Wang, Xiaowen↗