Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selection methodology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Inspecta Annual Technical Report

Sandia National Laboratories (SNL) is designing and developing an Artificial Intelligence (AI)-enabled smart digital assistant (SDA), Inspecta (International Nuclear Safeguards Personal Examination and Containment Tracking Assistant). The goal is to provide inspectors an in-field digital assistant that can perform tasks identified as tedious, challenging, or prone to human error. During 2021, we defined the requirements for Inspecta based on reviews of International Atomic Energy Agency (IAEA) publications and interviews with former IAEA inspectors. We then mapped the requirements to current commercial or open-source technical capabilities to provide a development path for an initial Inspecta prototype while highlighting potential research and development tasks. We selected a highimpact inspection task that could be performed by an early Inspecta prototype and are developing the initial architecture, including hardware platform. This paper describes the methodology for selecting an initial task scenario, the first set of Inspecta skills needed to assist with that task scenario and finally the design and development of Inspecta’s architecture and platform.

42 ENGINEERING↗

Prevention of Overcurrent and Admissible Voltage Limit Violation in Electrical Network Nodes

In a centralized emergency control system (CECS) with a third-generation algorithm, emergency control actions (CA) are selected under conditions of preventing disruption of dynamic stability, providing the required margin of stability in post-emergency condition, as well as preventing overcurrent and restricting voltage in network nodes to admissible limits. A methodology for selecting CAs for these last two conditions is described.

42 ENGINEERING↗

Evaluation of printability methodologies and feasibility to down select LBPF steel and other materials for nuclear applications

In this work, new research is underway to produce alloys beyond well-known alloys with modified compositions that are better suited to be produced with additive manufacturing. These alloys can only possess improved radiation tolerance but also improved high temperature strength, creep resistance while also using elements that reduce the amount of activation after irradiation. This work package supports the vision and goals of the Advanced Materials and Manufacturing Technology (AMMT) program relevant to accelerate the development and deployment of advanced manufacturing processes. This work focuses on evaluating the methodology for designing alloys best suited for AM processes based on “printability”, literature research to evaluate and down select steel alloy systems. In this work, microstructural characterization and testing activities have been performed on certain steel alloys to support the efforts from collaborating laboratories during the evaluation and printing of the test articles. The final recommendation will be performed by all four participating laboratories.

316L↗

A risk index for multicriterial selection of a logging system with low environmental impact

Setting up the working stages in forest operations is conditioned by environmental protection and forest health requirements. This paper exposes a method for improving the decision-making process by choosing the most environmentally effective logging systems according to terrain configuration and stand characteristics. Such a methodology for selecting machines or logging systems accounting for environment, safety as well as economics, becomes mandatory in the context of sustainable management of forest with multiple functions. Based on analytic hierarchy process analysis the following classification of the environmental performance for four considered alternatives was obtained: skyline system (42.43%), forwarder system (20.22%), skidder system (19.92%) and horse logging system (17.43%). Further, an environmental risk matrix for the most important 28 risk factors specific to any work equipment used in forest operations was produced. In the end, a multicriterial analysis generated a risk index RI ranging between 1.0 and 3.5, which could help choosing the optimal combination of logging system and logging equipment with low environmental impact. In order to demonstrate the usefulness of the proposed approach, a simple application in specific conditions of a harvesting site is presented. - Highlights: • We propose a decision-making algorithm to select eco-friendly logging systems. • Analytic hierarchy process was applied for ranking 4 types of logging systems. • An environmental risk matrix with 28 risk factors in forest operations was made up.

54 ENVIRONMENTAL SCIENCES↗

Community Resilience Indicator Analysis: Commonly Used Indicators from Peer-Reviewed Research (Updated for Research Published 2003-2021)

In 2017, FEMA’s National Integration Center (NIC) Technical Assistance (TA) Branch identified a need to establish a data-driven basis for prioritizing locations for TA investment and guiding local emergency management planning. To achieve this goal, FEMA tasked Argonne National Laboratory (Argonne) with identifying commonly used indicators of community resilience across the landscape of published peer-reviewed research. FEMA and Argonne completed the first Community Resilience Indicator Analysis (CRIA) in 2018 and repeated the process in 2022. The CRIA process begins with a literature review and cataloguing of published peer-reviewed assessment methodologies on social vulnerability and community resilience. The literature review findings are then filtered by inclusion criteria established by the CRIA research team to ensure the methodologies are: (1) Quantitative, (2) Data and methodology are publicly available, (3) Calculated at the county level or lower, (4) Examine generalized hazard risk (rather than a singular hazard), and (5) Focused on pre-disaster community conditions. After this, the research team identifies the commonly used indicators across these methodologies and selects the best data source for each indicator. Finally, the research team bins the data for visual display, conducts a correlation analysis and creates a composite index, the FEMA Community Resilience Index (FEMA CRI). In 2018, the CRIA identified eight resilience and vulnerability assessment methodologies and 20 commonly used indicators (indicators used in three or more of the eight methodologies). The FEMA CRI in 2018 was created from these 20 indicators and was produced for at the county level. The 2022 CRIA updated the literature review to expand the list of methodologies examined and followed the same process, resulting in an analysis of 14 methodologies published between 2003 and 2021 and 22 indicators identified as commonly used (indicators used in five or more of the 14 methodologies). In 2022, the research team produced the FEMA CRI at the county and the census tract levels. To make the CRIA data more accessible and more actionable, each individual indicator and the FEMA CRI is binned and included in FEMA’s Resilience Analysis and Planning Tool (RAPT). RAPT enables emergency managers and community partners to quickly visualize relative differences in potential resilience by county, tribe and census tract. By reviewing the data for each of these 22 indicators individually, emergency managers can gain insights for targeted outreach strategies, planning, mitigation investments and response and recovery operations. Communities, regional governments and others can use this data to better understand potential challenges to resilience. As the social science field of examining and validating indicators of resilience evolves, FEMA will update RAPT to provide emergency managers and community partners with additional data and tools to inform planning, mitigation, response and recovery. It is important to understand that the role of the emergency manager is not to change or to “improve” the data, but to plan appropriately for the community characteristics reflected in the data. These datasets are community characteristics that researchers have identified as important considerations for resilience. For example, people with disabilities may have greater challenges to be resilient to disasters. If a community has a high population of people with disabilities, the emergency manager(s) may need to create tailored preparedness outreach programs and strategies to ensure those residents have support if evacuation is necessary. Rather than label these indicators as an absolute measure of resilience, FEMA considers “potential challenges to resilience” a better frame to understand these indicators. Everyone is vulnerable to disasters. While scholars theorize that certain characteristics may make an individual or a household more socially vulnerable, the data does not reflect measures that individuals and/or communities have taken to address potential challenges, such as emergency management planning and outreach or household preparedness measures. To aid emergency managers in understanding how to use these indicators, calling them potential challenges to resilience supports a more positive and strategic application of the data in all phases of emergency management.

99 GENERAL AND MISCELLANEOUS↗

Rocket Plume Scaling for Orion Wind Tunnel Testing

A wind tunnel test program was undertaken to assess the jet interaction effects caused by the various solid rocket motors used on the Orion Launch Abort Vehicle (LAV). These interactions of the external flowfield and the various rocket plumes can cause localized aerodynamic disturbances yielding significant and highly non-linear control amplifications and attenuations. This paper discusses the scaling methodologies used to model the flight plumes in the wind tunnel using cold air as the simulant gas. Comparisons of predicted flight, predicted wind tunnel, and measured wind tunnel forces-and-moments and plume flowfields are made to assess the effectiveness of the selected scaling methodologies.

Brauckmann, Gregory J.↗

Uncertainty reduction in residual stress measurements by an optimised inverse solution using nonconsecutive polynomials

Many destructive methods for measuring residual stresses such as the slitting method require an inverse analysis to solve the problem. The accuracy of the result as well as an uncertainty component (the model uncertainty) depends on the basis functions used in the inverse solution. The use of a series expansion as the basis functions for the inverse solution was analysed in a previous work for the particular case where functions orders grew consecutively. The present work presents a new estimation of the model uncertainty and a new improved methodology to select the final basis functions for the case where the basis is composed of polynomials. Including nonconsecutive polynomial orders in the basis generates a larger space of possible solutions to be evaluated and allows the possibility to include higher-order polynomials. The paper includes a comparison with two other inverse analyses methodologies applied to synthetically generated data. With the new methodology, the final error is reduced and the uncertainty estimation improved.

36 MATERIALS SCIENCE↗

Probabilistic fracture mechanics and optimum fracture control of the solid rocket motor case of the shuttle

Development of a procedure for the reliability analysis of the solid rocket motor case of the space shuttle is described. The analysis is based on probabilistic fracture mechanics and consideration of a probability distribution for the initial flaw sizes. The reliability analysis can be used to select design variables, such as the thickness of the SRM case, projected design life and proof factor, on the basis of minimum expected cost and specified reliability bounds. Effects of fracture control plans such as the non-destructive inspections and the material erosion between missions can also be considered in the developed methodology for selection of design variables. The reliability-based procedure can be easily modified to consider other similar structures and different fracture control plans.

Hanagud, S.↗

Guidelines for Phase Change Material Selection Based on a Holistic System Model

Concentrating solar power (CSP) has potential to increase the amount of renewable energy on electric grids and reduce global carbon emissions, in particular because of its capability to incorporate inexpensive thermal energy storage. To realize this potential, development of latent heat storage with phase change materials (PCMs) is attractive because of its high energy density and low material cost. Research in this area has identified many promising materials, and has developed effective storage system designs that could be used to deploy PCMs. However, the field has lacked a rigorous methodology to select the optimal material for a particular CSP system. To address this need, here we present a holistic model that evaluates all important influences of PCM properties on the performance and cost of an entire CSP plant. We apply this model to over 100 of the most widely considered candidate materials, including both salts and metals. We quantify the relative value of each PCM property, and identify leading materials for application in CSP systems. This method and our results may aid future efforts to develop latent heat storage by providing a more informed view of how material selection impacts an entire CSP system.

14 SOLAR ENERGY↗

Rethinking radiation effects in materials science using the plasma-focused ion beam

This work demonstrates the viability of using a plasma-focused ion beam (PFIB) as a new platform to carry out radiation effects studies in solids. While materials subjected to irradiation in either nuclear reactors or energetic particle accelerators experience limitations with respect to inaccuracies in both flux measurements and lack of precise control of irradiation areas, we demonstrate a new irradiation technique that allows the exposure of a single specimen in multiple areas, at multiple doses, and in site-specific dependencies - all with flux variations on the order of only 1%. This versatile technique also allows materials to be exposed to significantly higher irradiation dose rates than conventional accelerators. To validate the new methodology, we selected the classical example of ion-beam-induced amorphization of pure single-crystal Si. By pioneering the use of the PFIB for radiation effects studies in materials science, we were able to exploit, in both micro- and nanometer-sized detail, the differences in electron image contrast arising from crystalline versus amorphous solid-state phases in classical semiconductors subjected to irradiation, thus providing new insights on amorphization mechanisms. This methodology opens new research frontiers at the fringe of materials science with promising applications beyond the scope of materials at extremes such as in nanopatterning, nanodevices and nanoarchitectonics.

36 MATERIALS SCIENCE↗

Designing Passivating, Carrier-Selective Contacts for Photovoltaic Devices

"The first step towards building a high-efficiency solar cell is to develop an absorber with few recombination-active defects. Many photovoltaic technologies have already achieved this (monocrystalline Si, III-V materials grown on lattice-matched substrates, perovskites, polycrystalline CdTe and CIGS); those that have not (a-Si:H, organics) have been limited to low open-circuit voltage. The second step is to develop contacts that both inhibit surface recombination and allow for low-resistance collection of either only electrons or only holes. For most photovoltaic technologies, this step is both more difficult and less explored than the first, and we are unaware of a prescribed methodology for selecting materials for contacts to solar cells. We elucidate a unified, conceptual understanding of contacts within which existing contacting schemes can be interpreted and future contacting schemes can be imagined. Whereas a split of the quasi-Fermi levels of holes and electrons is required in the absorber of any solar cell to generate a voltage, carriers are eventually collected through a metallic wire in which no such quasi-Fermi-level split exists. We define a contact to be all layers between the bulk of the absorber and the recombination-active interface through which carriers are extracted. The quasi-Fermi levels must necessarily collapse at this interface, and thus the transition between maximal quasi-Fermi-level splitting (in the absorber) and no splitting occurs entirely in the contact. Depending on the solar cell architecture, the contact will usually extend from the surface of the absorber to the surface of a metal or transparent conductive oxide layer, and may include deposited or diffused doped layers (e.g., as in crystalline and thin-film Si cells) and heterostructure buffer layers (e.g., the CdS layer in a CdTe device). We further define a passivating contact as one that enables high quasi-Fermi-level splitting in the absorber (large “internal” voltage), where “high” is relative to the splitting dictated by bulk recombination. Finally, we define a carrier-selective contact as one that enables a high “external” voltage measured across the contacts, where “high” is relative to the internal voltage. With these definitions, passivating contacts are those that allow only electrons, only holes, or neither electrons or holes to transport from the absorber to any position in the contact that has recombination-active defects. An excellent example of this is a SiNx layer on a Si wafer: the layer removes dangling bonds at the wafer surface (where there are both electrons and holes) and does not allow either carrier type to travel to its outermost surface, where there are undoubtedly defects. Carrier-selective contacts are then passivating contacts that also allow for low-impedance flow of either electrons or holes (but not both) to the recombination-active, extracting interface. The most common example is a heavily doped layer that establishes an electric field at the absorber surface, which then “filters” the carriers that may pass to the contact according to the sign of their charge.

14 SOLAR ENERGY↗

System cost/performance analysis (study 2.3). Volume 1: Executive summary

The relationships between performance, safety, cost, and schedule parameters were identified and quantified in support of an overall effort to generate program models and methodology that provide insight into a total space vehicle program. A specific space vehicle system, the attitude control system (ACS), was used, and a modeling methodology was selected that develops a consistent set of quantitative relationships among performance, safety, cost, and schedule, based on the characteristics of the components utilized in candidate mechanisms. These descriptive equations were developed for a three-axis, earth-pointing, mass expulsion ACS. A data base describing typical candidate ACS components was implemented, along with a computer program to perform sample calculations. This approach, implemented on a computer, is capable of determining the effect of a change in functional requirements to the ACS mechanization and the resulting cost and schedule. By a simple extension of this modeling methodology to the other systems in a space vehicle, a complete space vehicle model can be developed. Study results and recommendations are presented.

Kazangey, T.↗

THE STRUCTURE FUNCTION OF THE FREE NEUTRON AT HIGH X-BJORKEN

Understanding the internal structure of nucleons is one of the primary goal of nuclear physicists. As protons and neutrons are only the bound state solution of the QCD lagrangian (at least inside atomic nuclei), studying protons and neutrons helps uncover nuclear struc ture. Due to its easy availability, many studies on protons have been done on a wide range of kinematics. However, free neutron targets are not readily achievable. So, any information on neutrons has to be extracted from neutron-rich nuclei, and some nuclear models have to be used to subtract the contributions from other nucleons to extract the information on neutrons. So, the Barely Off-shell Nucleon Structure (BONuS12) experiment at Jefferson Lab was conducted to overcome these challenges by using spectator tagging. The experiment effectively created a quasi-free neutron target by scattering electrons off a deuterium target and detecting low-momentum, backward-moving protons using a custom-built Radial Time Projection Chamber (RTPC). Selecting the low momentum and backward-moving spectators would enable us to minimize the model-dependent effects due to final state interactions and target fragmentation. The RTPC was a 40 cm-long cylindrical detector that works on the principle of gaseous ionization. It had three layers of Gas Electron Multipliers (GEMs) for charge amplification and a surrounding readout pad. The scattered electrons were measured using the CLAS12 detector, and data were collected using a 10.4 GeV electron beam dur ing Spring and Summer 2020. Using spectator tagging, we extracted the structure function ratio Fn 2 of the quasi-free neutron in the deep inelastic scattering at high x, upto x ~ 0.8. The result was extracted in the region with the invariant mass W > 1.8 GeV/c2, and Q2 in the range 1.3 to 11 GeV2. This dissertation presents the methodology, event selection criteria and refinements, estimation and subtraction of backgrounds, and complete analysis of extraction of Fn 2/Fp 2 in a model-independent way. Also, systematic uncertainties in our final analysis will be discussed in detail.

Pokhrel, Madhusudhan [Old Dominion Univ., Norfolk,↗

Preparation of Diffusion Couples for Irradiation and High Temperature Testing of Representative TRISO PyC/SiC

Understanding the release of fission products from intact tristructural-isotropic (TRISO) coated particle fuel during normal and off-normal service is necessary to ensuring safe and efficient reactor operation. Planar diffusion couples have been fabricated to determine the diffusion kinetics of select fission product species (Ag, Ag+Pd, Eu, and Sr) in pyrocarbon (PyC) and silicon carbide (SiC) materials which are representative of TRISO fuel. Obtaining accurate diffusion coefficients for these systems in representative materials will allow for higher fidelity inputs for fuel performance models. Three different diffusion couple variants have been produced which include a Baseline, PyC, and SiC variant. The Baseline variant serves as an example of representative PyC and SiC layers as the layer properties mimic those found in TRISO fuel from the second Advanced Gas Reactor Fuel Qualification and Development Program. The PyC and SiC variants include variation in the respective layer properties to understand the impact of PyC density and SiC grain size on fission product diffusion. The diffusion couples were designed to allow for exploration of neutron irradiation on diffusion reflecting in reactor behavior as well as high temperature thermal diffusion reflecting diffusive transport during off-normal conditions. The methodology for selecting the diffusion couple design, refinement of the individual variant layer properties, and the complete process for diffusion couple construction are summarized in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Exploration of Advanced Probabilistic and Stochastic Design Methods

The primary objective of the three year research effort was to explore advanced, non-deterministic aerospace system design methods that may have relevance to designers and analysts. The research pursued emerging areas in design methodology and leverage current fundamental research in the area of design decision-making, probabilistic modeling, and optimization. The specific focus of the three year investigation was oriented toward methods to identify and analyze emerging aircraft technologies in a consistent and complete manner, and to explore means to make optimal decisions based on this knowledge in a probabilistic environment. The research efforts were classified into two main areas. First, Task A of the grant has had the objective of conducting research into the relative merits of possible approaches that account for both multiple criteria and uncertainty in design decision-making. In particular, in the final year of research, the focus was on the comparison and contrasting between three methods researched. Specifically, these three are the Joint Probabilistic Decision-Making (JPDM) technique, Physical Programming, and Dempster-Shafer (D-S) theory. The next element of the research, as contained in Task B, was focused upon exploration of the Technology Identification, Evaluation, and Selection (TIES) methodology developed at ASDL, especially with regards to identification of research needs in the baseline method through implementation exercises. The end result of Task B was the documentation of the evolution of the method with time and a technology transfer to the sponsor regarding the method, such that an initial capability for execution could be obtained by the sponsor. Specifically, the results of year 3 efforts were the creation of a detailed tutorial for implementing the TIES method. Within the tutorial package, templates and detailed examples were created for learning and understanding the details of each step. For both research tasks, sample files and tutorials are attached in electronic form with the enclosed CD.

Marvis, Dimitri N.↗

Exploration of Advanced Probabilistic and Stochastic Design Methods

The primary objective of the three year research effort was to explore advanced, non-deterministic aerospace system design methods that may have relevance to designers and analysts. The research pursued emerging areas in design methodology and leverage current fundamental research in the area of design decision-making, probabilistic modeling, and optimization. The specific focus of the three year investigation was oriented toward methods to identify and analyze emerging aircraft technologies in a consistent and complete manner, and to explore means to make optimal decisions based on this knowledge in a probabilistic environment. The research efforts were classified into two main areas. First, Task A of the grant has had the objective of conducting research into the relative merits of possible approaches that account for both multiple criteria and uncertainty in design decision-making. In particular, in the final year of research, the focus was on the comparison and contrasting between three methods researched. Specifically, these three are the Joint Probabilistic Decision-Making (JPDM) technique, Physical Programming, and Dempster-Shafer (D-S) theory. The next element of the research, as contained in Task B, was focused upon exploration of the Technology Identification, Evaluation, and Selection (TIES) methodology developed at ASDL, especially with regards to identification of research needs in the baseline method through implementation exercises. The end result of Task B was the documentation of the evolution of the method with time and a technology transfer to the sponsor regarding the method, such that an initial capability for execution could be obtained by the sponsor. Specifically, the results of year 3 efforts were the creation of a detailed tutorial for implementing the TIES method. Within the tutorial package, templates and detailed examples were created for learning and understanding the details of each step. For both research tasks, sample files and tutorials are attached in electronic form with the enclosed CD.

Mavris, Dimitri N.↗

Understanding and Controlling Cesium Loading on Crystalline Silicotitanate - 19601

Savannah River Remediation (SRR) contracted with Westinghouse Electric Corporation (WEC), Columbia Energy and Environmental Services (CEES), to build and deliver a modular ion exchange process that will be used to remove radioactive cesium from dissolved salt solution contained in Tank 10 at the Savannah River Site (SRS). The resulting decontaminated salt solution will be sent to Tank 11 and then to Tank 50 for final disposition in grout at the Saltstone facility. At the end of processing, the loaded ion exchange (IX) columns are drained, rinsed, and dried. The IX columns are removed from the modular unit and stored at Interim Safe Storage (ISS). This ion exchange process is called the Tank Closure Cesium Removal (TCCR) system. The TCCR system consists of several unit operations and process monitoring capability housed within three modular units. The first modular unit contains the process control computer, the second modular unit contains the main process equipment (two prefilters, four IX columns, and resin trap (post filtration)), and the third modular unit is the ventilation system. The main unit operations of the TCCR system are filtration, ion exchange, and ventilation. The ion exchange media utilized is a form of inorganic Crystalline Silicotitanate (CST), IONSIV{sup TM} R9120-B supplied by UOP Honeywell. CST has a high selectivity for cesium (Cs) and has some affinity for other Group IA alkali metals on the periodic chart (hydrogen, lithium, sodium, potassium, rubidium, and francium). CST has also been shown to have affinity for strontium and actinides. Cesium loading on the CST is dependent on many factors including chemical composition (cations and anions), temperature, and pH of the salt solution. The actual amount of Cs loaded onto an IX column is dependent on the factors above along with the salt solution volume fed to the IX column. Because of CST's high selectivity for Cs, the Cs-137 equilibrium loading can contribute enough decay heat to result in an ion exchange column boiling event under no flow conditions in the IX column. The boiling event under no flow is a safety concern that must be prevented from occurring. To prevent boiling of the column under no flow conditions, the Cs-137 equilibrium loading must be determined and understood. Several methodologies were evaluated for performing the Cs-137 equilibrium loading determination for CST. After review of available research and development (R and D), batch equilibrium contact test data, and Zheng Anthony Miller (ZAM) model predictions for the salt solution chemistry in Tank 10, a methodology for determining the Cs-137 equilibrium loading on CST was selected. The methodology selected involves an in-tank batch equilibrium contact test performed in duplicate that considers additional corrections to account for anticipated operational evolutions. The in-tank batch equilibrium contact test utilizes ∼0.1 grams of CST secured in a slotted sample vial. The slotted sample vial design allows for salt solution to be in contact with the CST. The slotted sample vials containing the CST are submerged in Tank 10 and exposed to the salt solution for ten days. After ten days, the samples are retrieved and sent to the Savannah River National Laboratory (SRNL) for analysis of the Cs-137 equilibrium loading. Additional corrections are then made to the Cs-137 results to account for anticipated operational evolutions. Anticipated operational evolutions include external additions (water/caustic) to Tank 10 that result in a change to its chemical composition, tank temperature effects, departures from the laboratory testing (mixed vs. stagnant tank conditions), and IX column flushes. A description of the methodologies considered, feasibility of methodology deployment, and the down select process (benefits vs. risks) is discussed in this paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗