Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Some examples of deep structure of the Archean from geophysics

The development of Archean crust remains as one of the significant problems in earth science, and a major unknown concerning Archean terrains is the nature of the deep crust. The character of crust beneath granulite terrains is especially fascinating because granulites are generally interpreted to represent a deep crustal section. Magnetic data from this area can be best modeled with a magnetized wedge of older Archean rocks (granulitic gneisses) underlying the younger Archean greenstone terrain. The dip of the boundary based on magnetic modeling is the same as the dip of the postulated thrust-fault reflection. Thus several lines of evidence indicate that the younger Archean greenstone belt terrain is thrust above the ancient Minnesota Valley gneiss terrain, presumably as the greenstone belt was accreted to the gneiss terrain, so that the dipping reflection represents a suture zone. Seismic data from underneath the granulite-facies Minnesota gneiss terrain shows abundant reflections between 3 and 6 s, or about 9 to 20 km. These are arcuate or dipping multicyclic events indicative of layering.

Smithson, S. B.↗
NASA NTRS2014

GRAIL Refinements to Lunar Seismic Structure

Gravity field measurements are perhaps the most numerous of the indirect observations relevant to the Moon's internal structure. Multiple recent missions have mapped the global lunar gravity field, each one improving upon the resolution of the last. The details of the Moon's deepest structure, including the parameters that define the lunar core, however, were still largely unaddressed by pre-GRAIL gravity measurements, which were not high enough resolution to resolve the tidal coefficients at a sufficient degree of accuracy. Current constraints on core size and state arise from other indirect measurements, including lunar laser ranging, magnetic induction studies, and analyses of elemental abundances in depth-derived mare basalts. These inferences vary widely, but when considered together with structure models derived from the seismic data gathered during the Apollo missions, a schematic of the lunar interior containing a partially molten deepest mantle layer overlying molten outer and solid inner core layers was obtained. Seismology provides the most direct constraints on the variables that govern the dynamic properties of the body. However, the GRAIL mission's high-resolution measurements of the lunar gravity field are being used to constrain the interior structure of the Moon using a "crust to core" approach. GRAIL's constraints on crustal thickness, mantle structure, core radius and stratification, and core state (solid vs. molten) therefore complement seismic investigations. This work focuses on expanding our knowledge of the Moon's internal structure using joint gravity and seismic analyses, which will improve constraints on the deep lunar mantle and core.

Weber, Renee C.↗
NASA NTRS2000

Advanced Shipboard Communications Demonstrations with ACTS

For ships at sea. satellites provide the only option for high data rate (HDR), long haul communications. Furthermore the demand for HDR satellite communications (SATCOM) for military and commercial ships. and other offshore platforms is increasing. Presently the bulk of this maritime HDR SATCOM connectivity is provided via C-band and X-band. However, the shipboard antenna sizes required to achieve a data rate of, say T 1 (1.544 Mbps) with present C-/X-band SATCOM systems range from seven to ten feet in diameter. This limits the classes of ships to which HDR services can be provided to those which are large enough to accommodate the massive antennas. With its high powered K/Ka-band spot beams, the National Aeronautics and Space Administration's (NASA) Advanced Communications Technology Satellite (ACTS) was able to provide T I and higher rate services to ships at sea using much smaller shipboard antennas. This paper discusses three shipboard HDR SATCOM demonstrations that were conducted with ACTS between 1996 and 1998. The first demonstration involved a 2 Mbps link provided to the seismic survey ship MN Geco Diamond equipped with a 16-inch wide, 4.5-inch tall, mechanically steered slotted waveguide array antenna developed by the Jet Propulsion Laboratory. In this February 1996 demonstration ACTS allowed supercomputers ashore to process Geco Diamond's voluminous oceanographic seismic data in near real time. This capability allowed the ship to adjust its search parameters on a daily basis based on feedback from the processed data, thereby greatly increasing survey efficiency. The second demonstration was conducted on the US Navy cruiser USS Princeton (CG 59) with the same antenna used on Geco Diamond. Princeton conducted a six-month (January-July 1997) Western Hemisphere solo deployment during which time T1 connectivity via ACTS provided the ship with a range of valuable tools for operational, administrative and quality-of-life tasks. In one instance, video teleconferencing (VTC) via ACTS allowed the ship to provide life-saving emergency medical aid, assisted by specialists ashore. to a fellow mariner - the Master of a Greek cargo ship. The third demonstration set what is believed to be the all-time SATCOM data rate record to a ship at sea, 45 Mbps in October 1998. This Lake Michigan (Chicago area) demonstration employed one of ACTS' fixed beams and involved the smallest of the three vessels, the 45-foot Bayliner M/V Entropy equipped with a modified commercial-off-the-shelf one-meter antenna. A variety of multi-media services were provided to Entropy through a stressing range of sea states. These three demonstrations provided a preview of the capabilities that could be provided to future mariners on a more routine basis when K/Ka-band SATCOM systems are widely deployed.

Axford, Roy A.↗
NASA NTRS1988

Determination of design and operation parameters for upper atmospheric research instrumentation to yield optimum resolution with deconvolution, appendix 2

This thesis reviews the technique established to clear channels in the Power Spectral Estimate by applying linear combinations of well known window functions to the autocorrelation function. The need for windowing the auto correlation function is due to the fact that the true auto correlation is not generally used to obtain the Power Spectral Estimate. When applied, the windows serve to reduce the effect that modifies the auto correlation by truncating the data and possibly the autocorrelation has on the Power Spectral Estimate. It has been shown in previous work that a single channel has been cleared, allowing for the detection of a small peak in the presence of a large peak in the Power Spectral Estimate. The utility of this method is dependent on the robustness of it on different input situations. We extend the analysis in this paper, to include clearing up to three channels. We examine the relative positions of the spikes to each other and also the effect of taking different percentages of lags of the auto correlation in the Power Spectral Estimate. This method could have application wherever the Power Spectrum is used. An example of this is beam forming for source location, where a small target can be located next to a large target. Other possibilities extend into seismic data processing. As the method becomes more automated other applications may present themselves.

Ioup, George E.↗
NASA NTRS1977

Global correlation of topographic heights and gravity anomalies

The short wavelength features were obtained by subtracting a calculated 24th-degree-and-order field from observed data written in 1 deg x 1 deg squares. The correlation between the two residual fields was examined by a program of linear regression. When run on a worldwide scale over oceans and continents separately, the program did not exhibit any correlation; this can be explained by the fact that the worldwide autocorrelation function for residual gravity anomalies falls off much faster as a function of distance than does that for residual topographic heights. The situation was different when the program was used in restricted areas, of the order of 5 deg x 5 deg square. For 30% of the world,fair-to-good correlations were observed, mostly over continents. The slopes of the regression lines are proportional to apparent densities, which offer a large spectrum of values that are being interpreted in terms of features in the upper mantle consistent with available heat-flow, gravity, and seismic data.

Roufosse, M. C.↗
NASA NTRS1967

Detection and estimation theory

Equalization of dispersive channels using decision feedback, and state variable estimation of sonar or seismic data in presence of pure delay

COMMUNICATION THEORY↗
NASA NTRS1971

Theoretical equations of state

Theoretical equations of state in geophysics, considering systematics approach to laboratory data, seismic velocity profiles, finite strain and atomistic approach

Sammis, C. G.↗
NASA NTRS1972

Passive seismic experiment

The establishment of a network of seismic stations on the lunar surface as a result of equipment installed by Apollo 12, 14, and 15 flights is described. Four major discoveries obtained by analyzing seismic data from the network are discussed. The use of the system to detect vibrations of the lunar surface and the use of the data to determine the internal structure, physical state, and tectonic activity of the moon are examined.

Latham, G. V.↗
NASA NTRS1972

Q and structure.

Different values of seismic Q may be obtained from measurements of different portions of a seismic record, indicating a separation of the effects on energy propagation of scattering and real loss parameters. In cases in which these parameters can be separated, they can then be used in seismic modeling. As an example, a model is presented in which scattering occurs to a depth of about 10 km below the volcanic ridge in the Tonga-Fiji region. The case of the lunar maria is discussed in terms of the relation of measured seismic Q, scattering parameters, and direct ray propagation parameters. The results indicate that a fairly simple jointed bedrock model is compatible with observed lunar seismic data.

Warren, N.↗
NASA NTRS1973

ERTS Applications in earthquake research and mineral exploration in California

Examples that ERTS imagery can be effectively utilized to identify, locate, and map faults which show geomorphic evidence of geologically recent breakage are presented. Several important faults not previously known have been identified. By plotting epicenters of historic earthquakes in parts of California, Sonora, Mexico, Arizona, and Nevada, we found that areas known for historic seismicity are often characterized by abundant evidence of recent fault and crustal movements. There are many examples of seismically quiet areas where outstanding evidence of recent fault movements is observed. One application is clear: ERTS-1 imagery could be effectively utilized to delineate areas susceptible to earthquake recurrence which, on the basis of seismic data alone, may be misleadingly considered safe. ERTS data can also be utilized in planning new sites in the geophysical network of fault movement monitoring and strain and tilt measurements.

Abdel-Gawad, M.↗
NASA NTRS1972

Structure, composition, and properties of lunar crust.

Lunar seismic data from three Apollo seismometers are interpreted to determine the structure of the moon's interior to a depth of about 100 km. The travel times and amplitudes of P and S arrivals from Saturn IV-B and LM impacts are interpreted in terms of a velocity profile. The most outstanding feature of the model is that, in the Fra Mauro region of Oceanus Procellarum, the moon has a 65 km-thick layered crust. Other features of the model are: (1) rapid increase of velocity near the surface due to pressure effects on dry rocks, (2) a discontinuity at a depth of about 25 km, (3) near-constant velocities between 25 and 65 km deep, (4) a major discontinuity at 65 km marking the base of the lunar crust, and (5) very high apparent velocities (about 9 km/sec for P waves) in the lunar mantle below the crust.

Toksoz, M. N.↗
NASA NTRS1972

Elastic velocity and Q factor measurements on Apollo 12, 14, and 15 rocks.

The Rayleigh wave velocities (vR) in one Apollo 12, one Apollo 15, and two Apollo 14 rocks were measured by the impulse technique. For 14310 vR = 1.20 km/sec; for 14321 vR = 0.9 km/sec; for 12063, on which the orientation dependence was studied, vR = 1.16-1.59 km/sec; for 15555 vR = 0.32 km/sec; and for synthetic rock 10017 analogue vR = 2.26 km/sec. This represents a larger spread by a factor of 3 than previously reported on lunar igneous rock. Absolute Q factor measurements were performed on one Apollo 14 rock by the vibrating bar technique. Under exposure to high vacuum and low temperatures, the Q factor is shown to increase towards values approaching the low end of the range of estimates from seismic data.

Tittmann, B. R.↗
NASA NTRS1972

The lunar interior.

For materials thought to be important in the lunar interior, compressional velocities are estimated and compared with lunar seismic data. The results obtained support the conclusion that the moon is an extremely well differentiated body. This is consistent with thermal history calculations which suggest that the moon was close to or in excess of melting (solidus) temperatures throughout most of its volume early in its history.

Anderson, D. L.↗
NASA NTRS1973

Conjectures about the evolution of the moon.

The principal questions about the derivation of the lunar surface have not yet been settled: is it the surface left over from the process of accumulation of the moon, or is it a surface generated by magmatic processes on the moon and subsequently altered by further infall from outside. The evidence derived from many sources now favors the former. Seismic data suggest an absence of bedrock down to a depth of several kilometers, and instead a compacted powder only. The 'mascon' evidence can be understood as a consequence of major impacts in a deep porous layer. The great abundance of cosmic ray tracks in most soil samples demands a much greater cosmic ray dosage than present rates would cause in the age of the moon, unless the dust represented infallen material previously irradiated.

Gold, T.↗
NASA NTRS1974

Convection in the moon - Effect of variable viscosity

This work determines criteria for stability of the lunar interior to thermal convection in the case of variable viscosity. The conditions necessary for solid convection to play an important role in the moon's revolution are determined by application of the calculated stability criteria to a variety of thermal history models. Most thermal history temperature profiles would be unstable to solid convection at the present time, if currently used estimates of the viscosity function are applicable. A possible explanation of lunar seismic data is that temperatures near the melting point of silicates exist at depths greater than 800 km. If this is the case, either the lunar interior is stable, or solid convection is occurring at a rate insufficient to cool the lunar interior substantially. If the former is true, the viscosity of lunar material is higher than that usually assumed.

Cassen, P.↗
NASA NTRS1975

Analyses of the solid earth and ocean tidal perturbations on the orbits of the GEOS-1 and GEOS-2 satellites

The luni-solar tidal perturbations in the inclination of the GEOS-I and GEOS-II satellite orbits were analyzed for the solid Earth and ocean tide conditions. Precision reduced camera and TRANET Doppler observations spanning periods of over 600 days for each satellite were used to derive mean orbital elements. Perturbations due to the earth's gravity field, solar radiation pressure, and atmospheric drag were modelled, and the resulting inclination residuals were analyzed for tidal effects. The amplitudes of the observed total tidal effects were about 1.2 arc seconds (36 meters) in the inclination of GEOS-I and 4.5 arc seconds (135 meters) for GEOS-II. The solid earth tides were then modelled using earth tide measurements, earth rotation observations, and seismic data. The resulting inclination residuals were analyzed for ocean tide parameters. The derived parameters consist of one second degree coefficient and an accompanying phase angle in a spherical harmonic expansion of the ocean tidal potential for each tidal constituent. The results are presented.

Felsentreger, T. L.↗