SEARCH · Engineering Papers

Results for “routing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Controller-Based Energy-Aware Wireless Sensor Network Routing Using Quantum Algorithms

Energy-efficient routing in wireless sensor networks has attracted attention from researchers in both academia and industry, most recently motivated by the opportunity to use software-defined network-inspired approaches. These problems are NP-hard, with algorithms needing computation time that scales faster than polynomials in the problem size. Consequently, heuristic algorithms are used in practice, which are unable to guarantee optimally. In this article, we show proof-of-principle for the use of a quantum annealing processor instead of a classical processor, to find optimal or nearly optimal solutions very quickly. Our preliminary results for small networks show that this approach using quantum computing has great promise and may open the door for other significant improvements in the efficacy of network algorithms.

42 ENGINEERING↗

DOE OSTI2020

Multiperiod Distribution System Restoration With Routing Repair Crews, Mobile Electric Vehicles, and Soft-Open-Point Networked Microgrids

This paper proposes a distribution system restoration model which is in response to multiple outages caused by natural disasters. The proposed restoration model includes the coordination of routing repair crews (RRCs), mobile batterycarried vehicles (MBCVs), and networked microgrids (NMGs) formed by soft open points (SOPs). The travel and repair time constraints are modeled for each RRC; travel path and charging strategy are modeled for each MBCV; and the network reconfiguration is developed considering the optimal operation of SOP-based NMGs. Furthermore, the proposed model is presented as a mixedinteger linear program which is solved by an auxiliary induce function based algorithm to reduce the computational complexity. The modified IEEE 33-bus and 69-bus distribution systems are tested with multiple outages. The presented results demonstrate the effectiveness of the proposed model

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2023

Investigating a Renewable-Resource-Targeting Mobile Aquaculture System Using Route Optimization Based on Optimal Foraging Theory

Aquaculture systems require careful consideration of location, which determines water conditions, pollution impacts, and hazardous conditions. Mobility may be able to address these factors while also supporting the targeting of renewable energy sources such as wind, wave, and solar power throughout the year. In this paper, a purpose-built mobile aquaculture ship is identified and modeled with a combination of renewable energy harvesting capabilities as a case study with the objective of assessing the potential benefits of targeting high renewable energy potentials to power aquaculture operations. A route optimization algorithm is created and tuned to simulate the mobility of the aquaculture platform and cost-basis comparisons are made to a stationary system. The small spatial variability in renewable energy potential when combining multiple resources significantly limits the benefits of a mobile, renewable-targeting aquaculture system. On the other hand, the consistent energy harvest from a blend of renewable energy types (13 kW installed wind capacity, 661 m 2 installed solar, and 1 m characteristic width wave-energy converter) suggests that the potential benefits of a mobile platform for offshore aquaculture (mitigation of environmental and social concerns, any potential positive impact on yields, hazard avoidance, etc.) can likely be pursued without significant increases in energy harvester costs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2020

Evidence for Interfacial Octahedral Coupling as a Route to Enhance Magnetoresistance in Perovskite Oxide Superlattices

Engineering octahedral rotations in oxide heterostructures is a promising route for controlling magnetic properties in perovskites, with recent work focusing on magnetic-ordering temperatures and magnetic anisotropies. Here the effects of interfacial octahedral coupling on magnetoresistance are demonstrated in a series of (La 0.7 Sr 0.3 MnO 3 ) n /(LaFeO 3 ) 10 superlattices grown on (001)- and (111)-oriented SrTiO 3 substrates. The different crystallographic orientations allow for the interfacial octahedral connectivity to be tuned, with weaker interfacial coupling present at the (001)-oriented than the (111)-oriented structures as revealed by density functional theory calculations. In n = 14 superlattices, the effect of orientation on the physical properties is minimal with both (001)- and (111)-oriented samples exhibiting similar magnetoresistance. As the fraction of interfacial volume within the LSMO layers is increased by decreasing n, the magnetoresistive behavior of the samples diverges with significantly larger magnetoresistance magnitudes present in the (111)-oriented superlattices. Furthermore, the results are consistent with octahedral coupling playing a greater role in the functional properties at (111)-heterointerfaces and demonstrate a structure-driven approach to tuning interfacial magnetoresistance in complex-oxide heterostructures.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Electronic Topological Transition as a Route to Improve Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3

The electronic structure near the Fermi surface determines the electrical properties of the materials, which can be effectively tuned by external pressure. Bi0.5Sb1.5Te3 is a p-type thermoelectric material which holds the record high figure of merit at room temperature. Here it is examined whether the figure of merit of this model system can be further enhanced through some external parameter. With the application of pressure, it is surprisingly found that the power factor of this material exhibits λ behavior with a high value of 4.8 mW m –1 K –2 at pressure of 1.8 GPa. Such an enhancement is found to be driven by pressure-induced electronic topological transition, which is revealed by multiple techniques. Together with a low thermal conductivity of about 0.89 W m –1 K –1 at the same pressure, a figure of merit of 1.6 is achieved at room temperature. The results and findings highlight the electronic topological transition as a new route for improving the thermoelectric properties.

36 MATERIALS SCIENCE↗

DOE OSTI2022

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Abstract Mesoporous silica is a versatile material for energy, environmental, and medical applications. Here, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 g −1 . We show its superior performance in water purification, as a drug carrier, and in thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell‐supported nanocatalysts by in situ decoration with active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97 % CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming an MCM‐41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to design and produce flexible catalysts for many reactions.

Liu, Shuo↗

DOE OSTI2023

Discovery of the Azaserine Biosynthetic Pathway Uncovers a Biological Route for α‐Diazoester Production

Abstract Azaserine is a bacterial metabolite containing a biologically unusual and synthetically enabling α‐diazoester functional group. Herein, we report the discovery of the azaserine ( aza ) biosynthetic gene cluster from Glycomyces harbinensis . Discovery of related gene clusters reveals previously unappreciated azaserine producers, and heterologous expression of the aza gene cluster confirms its role in azaserine assembly. Notably, this gene cluster encodes homologues of hydrazonoacetic acid (HYAA)‐producing enzymes, implicating HYAA in α‐diazoester biosynthesis. Isotope feeding and biochemical experiments support this hypothesis. These discoveries indicate that a 2‐electron oxidation of a hydrazonoacetyl intermediate is required for α‐diazoester formation, constituting a distinct logic for diazo biosynthesis. Uncovering this biological route for α‐diazoester synthesis now enables the production of a highly versatile carbene precursor in cells, facilitating approaches for engineering complete carbene‐mediated biosynthetic transformations in vivo.

Van Cura, Devon↗

DOE OSTI2022

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Mesoporous silica is a versatile material for energy, environmental, and medical applications. In this work, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 /g -1 . We show its superior performance in water purification, drug carrier, and thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell supported nanocatalysts by in situ decorating active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97% CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming MCM-41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to flexible catalysts design for many reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Discovery of the Azaserine Biosynthetic Pathway Uncovers a Biological Route for α‐Diazoester Production

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Triplet Generation Through Singlet Fission in Metal-Organic Framework: An Alternative Route to Inefficient Singlet-Triplet Intersystem Crossing

High quantum yield triplets, populated by initially prepared excited singlets, are desired for various energy conversion schemes in solid working compositions like porous MOFs. However, a large disparity in the distribution of the excitonic center of mass, singlet-triplet intersystem crossing (ISC) in such assemblies is inhibited, so much so that a carboxy-coordinated zirconium heavy metal ion cannot effectively facilitate the ISC through spin-orbit coupling. Circumventing this sluggish ISC, singlet fission (SF) is explored as a viable route to generating triplets in solution-stable MOFs. Efficient SF is achieved through a high degree of interchromophoric coupling that facilitates electron super-exchange to generate triplet pairs. Here we show that a predesigned chromophoric linker with extremely poor ISC efficiency (k ISC ) but E S 1 ≥ 2E T 1 form triplets in MOF in contrast to the frameworks that are built from linkers with sizable k ISC but E S 1 ≤ 2E T 1 . Finally, this work opens a new photophysical and photochemical avenue in MOF chemistry and utility in energy conversion schemes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Alternative route for electrochemical ammonia synthesis by reduction of nitrate on copper nanosheets

We propose an efficient and clean avenue for ammonia synthesis, via electroreduction of nitrate which could be obtained from industrial wastewater, domestic sewage, sodium nitrate ore, and nitrification of bacteria and electrochemical oxidation of nitrogen, which addresses the water pollution issues and simultaneously upgrades the nitrate to high-value ammonia. At a low overpotential of -0.15 V versus RHE, Cu nanosheets achieved an ammonia formation rate of 390.1 μg mg -1 Cu h -1 and a Faradaic efficiency of 99.7%, attributed to suppression of the HER activity and apparent improvement of the rate of rate-determining step on Cu (111). Such an ammonia formation rate is more than two orders of magnitude higher than electrochemical nitrogen reduction reaction to ammonia. This work not only develops a powerful strategy to the rational design of robust and efficient catalysts by crystal facet engineering, but also provides an alternative route for electrochemical ammonia synthesis by reduction of nitrate.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Closing the loop on plastics: Biological and hybrid routes for converting plastic waste to polyhydroxyalkanoates

Polyhydroxyalkanoate (PHA) production from plastic-derived substrates offers a promising route to mitigate plastic pollution while reducing dependence on conventional PHA feedstocks. Plastic waste represents an abundant carbon source for microbial fermentation, but efficient conversion remains limited by incomplete deconstruction, inhibitory intermediates, low carbon recovery, and challenges in process integration. Plastic-derived streams contain diverse compounds, including fatty acids, hydrocarbons, fatty alcohols, aldehydes, esters, and aromatic compounds generated during depolymerization. These intermediates can be metabolized by selected microorganisms, particularly Pseudomonas species with versatile fatty-acid and hydrocarbon pathways, as well as Cupriavidus necator and mixed microbial cultures. Unlike reviews that address plastic upcycling or PHA biosynthesis separately, this review focuses on the deconstruction–fermentation interface that governs plastic-to-PHA conversion. It consolidates current progress in plastic deconstruction, substrate conditioning, microbial metabolism, fermentation control, polymer recovery, and techno-economic and life-cycle considerations. Here, by emphasizing substrate composition, biological compatibility, plastic‑carbon recovery, and final polymer quality, the review identifies priorities for scalable and environmentally sustainable PHA production from plastic-derived substrates.

42 ENGINEERING↗

DOE OSTI2022

CALPHAD modeling of uranium nitride (UN) fabrication routes enabled by first-principles calculations

The thermochemical details of fabricating uranium nitride (UN) by ammonolysis of uranium tetraflouride (UF 4 ) were determined using density functional theory (DFT) and CALculation of PHAse Diagrams (CALPHAD) computational methods. The thermochemical data of all binary, ternary, and quaternary U-H-N-F phases were computed using DFT, and the data for the phases that have not been measured experimentally, including UN 2 and NH 4 F(g), were combined with existing experimentally-determined data for CALPHAD modeling. The DFT data were benchmarked using experimental Gibbs energy of reaction and experimental thermochemical data for individual species. Phase diagrams relevant to the ammonolysis reaction are depicted, showing regions of stability for solid U-N, U-F and U-N-F phases. An unidentified phase produced in a previous experiment was identified as UN 0.95 F 1.2 (UNF) by comparing its X-ray diffraction spectrum to the experimental spectrum, and its formation during the fabrication of UN from UF 4 is supported by the simulated phase diagram. Here, it is calculated that UN 2 can be produced by the ammonolysis of UF 4 , but requires elevated temperatures, high NH 3 (g) partial pressure, and large amounts of flowing NH 3 (g) to avoid solid flu oride impurities in the uranium nitride. Likewise, U 2 N 3 can be produced instead at temperatures greater than 980 K. The use of silane (SiH 4 ) gas was investigated as a potential additive in the ammonolysis fabrication route to speed removal of fluorine. The addition of SiH 4 (g) offers little advantage to the removal of fluorine, and adds the complication of Si 3 N 4 formation. The use of DFT to fill in missing data to perform CALPHAD calculations demonstrated here allows for the determination of more comprehensive and trustworthy phase diagrams than the use of existing experimental data alone.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Evaluating route to impact convergence of the harmonic balance method for piecewise-smooth systems

Here in this work, we investigate the applicability of the harmonic balance method (HBM) to predict periodic solutions of a single degree-of-freedom forced Duffing oscillator with freeplay nonlinearity. By studying the route to impact, which refers to a parametric study as the contact stiffness increases from soft to hard, the convergence behavior of the HBM can be understood in terms of the strength of the non-smooth forcing term. HBM results are compared to time-integration results to facilitate an evaluation of the accuracy of nonlinear periodic responses. An additional contribution of this study is to perform convergence and stability analysis specifically for isolas generated by the non-smooth nonlinearity. Residual error analysis is used to determine the approximate number of harmonics required to get results accurate to a given error tolerance. Hill’s method and Floquet theory are employed to compute the stability of periodic solutions and identify the types of bifurcations in the system.

42 ENGINEERING↗

DOE OSTI2022

Zn speciation and fate in soils and sediments along the ground transportation route of Zn ore to a smelter

We discuss assessment of Zn toxicity/mobility based on its speciation and transformations in soils as critical for maintaining human and ecosystem health. Zn-concentrate (56% Zn as ZnS, sphalerite) has been imported through a seaport and transported to a Zn-smelter for several decades, and smelting processes resulted in aerial deposition of Zn and sulfuric acids in two geochemically distinct territories around the smelter (mountain-slope and riverside). XAFS analysis showed that the mountain-slope soils contained franklinite (ZnFe 2 O 4 ) and amorphous (e.g., sorbed) species of Zn(II), whereas the riverside sediments contained predominantly hydrozincite [Zn 5 (OH) 6 (CO 3 ) 2 ], sphalerite, and franklinite. The mountain-slope soils had low pH and moderate levels of total Zn (~1,514 ppm), whereas the riverside sediments had neutral pH and higher total Zn (12,363 ppm). The absence of sphalerite and the predominance of franklinite in the mountain-slope soils are attributed to the susceptibility of sphalerite and the resistance of franklinite to dissolution at acidic pH. These results are compared to previous Zn analyses along the transportation routes, which showed that Zn-concentrate spilled along the roadside in dust and soils underwent transformation to various O-coordinated Zn species. Overall, Zn-concentrate dispersed in soils and sediments during transportation and smelting transforms into Zn phases of diverse stability and bioavailability during long-term weathering.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Microturbulence-mediated route for energetic ion transport and Alfvénic mode amplitude oscillations in tokamaks

The new regimes of Alfvén eigenmode (AE) induced fast ion transport in tokamak plasmas are reported, in which microturbulence plays the role of a mediator of fast ion relaxation. Coulomb collisional scattering alone leads to small AE amplitudes and does not reproduce the steady state regimes observed in experiments. We show that in nonlinear regimes the sufficiently large effective pitch angle scattering due to microturbulence can lead to steady state AE amplitude evolution. This indicates a new route for fast ion losses, which is beyond the scenarios described in “Energetic ion transport by microturbulence is insignificant in tokamaks”. As a result, microturbulence can significantly increase the amplitude of AEs in predictive simulations of burning plasma experiments such as ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Local Structural Disorder in Metavanadates MV 2 O 6 (M = Zn and Cu) Synthesized by the Deep Eutectic Solvent Route: Photoactive Oxides with Oxygen Vacancies

Metavanadates MV 2 O 6–δ (M = Zn and Cu) are synthesized by using a deep eutectic solvent (DES), a mixture of hydrogen bond donor and acceptor, as a reaction medium. Dissolution of stable binary metal oxides in a DES followed by a heat treatment yields phase-pure vanadates. According to in situ powder X-ray diffraction, ternary phases (α-Zn 2 V 2 O 7 and β-Cu 2–x V 2 O 7 , x ~ 0.27) are intermediates in the reaction pathway taken. Identifying a polymorphic phase transformation temperature for CuV 2 O 6 as well as the narrow temperature range between formation and decomposition for both metavanadates allows for tackling the challenge of the synthesis of these materials. The oxygen vacancy introduced by the DES route is accompanied by the formation of reduced V 4+ and Cu + in the oxide matrix, based on X-ray photoelectron spectroscopy. These oxygen vacancies modify the vibrational modes in the corresponding Raman spectra and are also responsible for broad optical absorptions in the 1.8–1.1 eV range. The optical band gaps of the materials are found at 1.8 eV (CuV 2 O 6 ) and 2.2 eV (ZnV 2 O 6 ), approximately 0.1–0.3 eV below the values reported in the literature. The reduced band gaps and sub-band gap photon absorption are key features of the oxygen-deficient metavanadates. Surface photovoltage spectroscopy reveals that all the synthesized vanadates are n-type materials with electrons as the majority charge carriers, and photoelectrochemical measurements confirm photoanodic currents for methanol oxidation. Furthermore, these results provide insight into the synthesis and structure–property relationship of the metavanadates for their potential use as photoanodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Rapid Identification of Synthetic Routes to Functional Metastable Phases Using X-ray Probed Laser Anneal Mapping (XPLAM) Time-Temperature Quench Maps

Many material systems have known or predicted functional phases that are metastable at standard temperature and pressure. While substantial advances have been made in the high-throughput and combinatorial synthesis of materials with a range of stoichiometries, investigation of thermal processing remains largely the domain of iterative uniform anneals or static gradients. Here we develop X-ray probed laser anneal mapping (XPLAM), a high throughput technique coupling spatially resolved X-ray diffraction with microsecond to millisecond laser gradient anneals to produce temperature–dwell–transformation (TDT) diagrams of the phase as a function of quench time and temperature. In addition to showing regimes where specific metastable phases form preferentially, TDT diagrams provide insight into the submillisecond kinetics of solid–solid phase transitions. This is a unique tool for mapping reaction pathways for metastable phases. As a first demonstration of XPLAM, we study Bi2O3, which has a rich set of polytypes, including the d-phase with an exceptionally high oxygen ion conductivity. We demonstrate the first annealing-driven synthesis of room temperature d-Bi2O3. We expect XPLAM to prove a powerful technique for rapid identification of synthetic routes to metastable phases and to generate the exhaustive data sets required for machine learning-guided exploration of materials processing.

36 MATERIALS SCIENCE↗