Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resistive MHD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Loss of equilibrium and reconnection in tearing of two-dimensional equilibria

Two-dimensional tearinglike behavior is studied in reduced resistive magnetohydrodynamics (MHD) with flux conserving boundary conditions on a rectangular box. The tearinglike perturbations do not destroy the symmetries of the initial state, either discrete or continuous. In such cases, in which the perturbation does not break a symmetry of the equilibrium, linear instability is typically not directly observed. However, there can be a loss of equilibrium associated with the existence of a tearing unstable state. These ideas are illustrated with three examples: a very elongated tokamak, a tokamak with pinching coils to elongate its flux surfaces, and a model for the magnetotail or for solar arcades. The loss of equilibrium is demonstrated by means of a nonlinear energy functional. The importance of the fact that the dynamics shows a loss of equilibrium is that a large amount of free energy can be released, in the form of reconnection, and that there is a possibility of hysteresis.

Finn, John M.↗
NASA NTRS1994

Transition to whistler mediated magnetic reconnection

The transition in the magnetic reconnection rate from the resistive magnetohydrodynamic (MHD) regime where the Alfen wave controls reconnection to a regime in which the ions become unmagnetized and the whistler wave mediates reconnection is explored with 2-D hybrid simulations. In the whistler regime the electrons carry the currents while the ions provide a neutralizing background. A simple physical picture is presented illustrating the role of the whistler mediated reconnection is calculated analytically. The development of an out-of-plane component of the magnetic field is an observable signature of whistler driven reconnection.

Mandt, M. E.↗
NASA NTRS2010

Multiscale Simulations of Magnetic Island Coalescence

We describe a new interactive parallel Adaptive Mesh Refinement (AMR) framework written in the Python programming language. This new framework, PyAMR, hides the details of parallel AMR data structures and algorithms (e.g., domain decomposition, grid partition, and inter-process communication), allowing the user to focus on the development of algorithms for advancing the solution of a systems of partial differential equations on a single uniform mesh. We demonstrate the use of PyAMR by simulating the pairwise coalescence of magnetic islands using the resistive Hall MHD equations. Techniques for coupling different physics models on different levels of the AMR grid hierarchy are discussed.

Dorelli, John C.↗
NASA NTRS2016

Modeling the Ionosphere-Thermosphere Response to a Geomagnetic Storm Using Physics-based Magnetospheric Energy Input: OpenGGCM-CTIM Results

The magnetosphere is a major source of energy for the Earth's ionosphere and thermosphere (IT) system. Current IT models drive the upper atmosphere using empirically calculated magnetospheric energy input. Thus, they do not sufficiently capture the storm-time dynamics, particularly at high latitudes. To improve the prediction capability of IT models, a physics-based magnetospheric input is necessary. Here, we use the Open Global General Circulation Model (OpenGGCM) coupled with the Coupled Thermosphere Ionosphere Model (CTIM). OpenGGCM calculates a three-dimensional global magnetosphere and a two-dimensional high-latitude ionosphere by solving resistive magnetohydrodynamic (MHD) equations with solar wind input. CTIM calculates a global thermosphere and a high-latitude ionosphere in three dimensions using realistic magnetospheric inputs from the OpenGGCM. We investigate whether the coupled model improves the storm-time IT responses by simulating a geomagnetic storm that is preceded by a strong solar wind pressure front on August 24, 2005. We compare the OpenGGCM-CTIM results with low-earth-orbit satellite observations and with the model results of Coupled Thermosphere-Ionosphere-Plasmasphere electrodynamics (CTIPe). CTIPe is an up-to-date version of CTIM that incorporates more IT dynamics such as a low-latitude ionosphere and a plasmasphere, but uses empirical magnetospheric input. OpenGGCMCTIM reproduces localized neutral density peaks at approx. 400 km altitude in the high-latitude dayside regions in agreement with in situ observations during the pressure shock and the early phase of the storm. Although CTIPe is in some sense a much superior model than CTIM, it misses these localized enhancements. Unlike the CTIPe empirical input models, OpenGGCM-CTIM more faithfully produces localized increases of both auroral precipitation and ionospheric electric fields near the high-latitude dayside region after the pressure shock and after the storm onset, which in turn effectively heats the thermosphere and causes the neutral density increase at 400 km altitude.

Connor, Hyunju K.↗
DOE OSTI2020

A linearity preserving nodal variation limiting algorithm for continuous Galerkin discretization of ideal MHD equations

A stabilized continuous Galerkin (CG) method for magnetohydrodynamics (MHD) is presented herein. Ideal, compressible inviscid MHD equations are discretized in space on unstructured meshes using piecewise linear or bilinear finite element bases to get a semi-discrete scheme. Stabilization is then introduced to the semi-discrete method in a strategy that follows the algebraic flux correction paradigm. This involves adding some artificial diffusion to the high order, semi-discrete method and mass lumping in the time derivative term. The result is a low order method that provides local extremum diminishing properties for hyperbolic systems. The difference between the low order method and the high order method is scaled element-wise using a limiter and added to the low order scheme. The limiter is solution dependent and computed via an iterative linearity preserving nodal variation limiting strategy. The stabilization also involves an optional consistent background high order dissipation that reduces phase errors. The resulting stabilized scheme is a semi-discrete method that can be applied to inviscid shock MHD problems and may be even extended to resistive and viscous MHD problems. To satisfy the divergence free constraint of the MHD equations, we add parabolic divergence cleaning to the system. Various time integration methods can be used to discretize the scheme in time. We demonstrate the robustness of the scheme by solving several shock MHD problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Resistive contributions to the stability of DIII-D ITER baseline demonstration discharges

Here, measurements of the plasma response to applied n = 1 perturbations from DIII-D ITER baseline scenario (IBS) demonstration discharges exhibit increasing amplitude prior to disruption inducing mode locking events. Simulations reveal that changes in ideal and resistive stability impact the response in the DIII-D IBS regime, well below the pressure limit of the external kink mode. The dependencies of the response measurements on the plasma normalized internal inductance ℓ i and beta β N are qualitatively consistent with ideal MHD, although in most cases the amplitude of the measurements exceeds predictions, indicating that the experimental discharges are less stable than expected. Resistive MHD simulations of the response show improved compatibility with the measurements, and the closest agreement is obtained by including the experimental plasma rotation in the simulations. Although the input neutral beam torque is near zero, the simulations show that the corresponding level of rotation can lead to nearly complete screening of the pitch-resonant field component at the q = 2 surface. However, the simulation results exhibit a significant weakening of this screening effect at the lowest rotation levels in the data set, concurrent with predictions of elevated response amplitudes that are consistent with measurements. These comparisons with DIII-D data provide a qualitative validation of a linear, resistive MHD response model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

As a Matter of Dynamical Range – Scale Dependent Energy Dynamics in MHD Turbulence

Abstract Magnetized turbulence is ubiquitous in many astrophysical and terrestrial plasmas but no universal theory exists. Even the detailed energy dynamics in magnetohydrodynamic (MHD) turbulence are still not well understood. We present a suite of subsonic, super-Alfvénic, high plasma beta MHD turbulence simulations that only vary in their dynamical range, i.e., in their separation between the large-scale forcing and dissipation scales, and their dissipation mechanism (implicit large eddy simulation, ILES, and direct numerical simulation (DNS)). Using an energy transfer analysis framework we calculate the effective numerical viscosities and resistivities, and demonstrate that all ILES calculations of MHD turbulence are resolved and correspond to an equivalent visco-resistive MHD turbulence calculation. Increasing the number of grid points used in an ILES corresponds to lowering the dissipation coefficients, i.e., larger (kinetic and magnetic) Reynolds numbers for a constant forcing scale. Independently, we use this same framework to demonstrate that—contrary to hydrodynamic turbulence—the cross-scale energy fluxes are not constant in MHD turbulence. This applies both to different mediators (such as cascade processes or magnetic tension) for a given dynamical range as well as to a dependence on the dynamical range itself, which determines the physical properties of the flow. We do not observe any indication of convergence even at the highest resolution (largest Reynolds numbers) simulation at 2048 3 cells, calling into question whether an asymptotic regime in MHD turbulence exists, and, if so, what it looks like.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

On the study of hydrodynamic instabilities in the presence of background magnetic fields in high-energy-density plasmas

Blast-wave-driven hydrodynamic instabilities are studied in the presence of a background B-field through experiments and simulations in the high-energy-density (HED) physics regime. In experiments conducted at the Laboratoire pour l’utilisation des lasers intenses (LULI), a laser-driven shock-tube platform was used to generate a hydrodynamically unstable interface with a prescribed sinusoidal surface perturbation, and short-pulse x-ray radiography was used to characterize the instability growth with and without a 10-T B-field. The LULI experiments were modeled in FLASH using resistive and ideal magnetohydrodynamics (MHD), and comparing the experiments and simulations suggests that the Spitzer model implemented in FLASH is necessary and sufficient for modeling these planar systems. These results suggest insufficient amplification of the seed B-field, due to resistive diffusion, to alter the hydrodynamic behavior. Although the ideal-MHD simulations did not represent the experiments accurately, they suggest that similar HED systems with dynamic plasma-β (=2μ0ρv2/B2) values of less than ∼100 can reduce the growth of blast-wave-driven Rayleigh–Taylor instabilities. These findings validate the resistive-MHD FLASH modeling that is being used to design future experiments for studying B-field effects in HED plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Resistive wall mode stability and resonant field amplification in MAST high beta plasma

The n=1 (n is the toroidal mode number) resistive wall mode (RWM) instability and the resonant field amplification (RFA) due to a stable RWM response are numerically investigated for a MAST high-pressure plasma scenario, utilizing the MARS-F (Liu Y.Q. et al 2000 Phys. Plasmas 7 3681) and MARS-K (Liu Y.Q. et al 2008 Phys. Plasmas 15 112503) codes, for the purpose of understanding the potential RWM behavior in MAST-U plasmas. Ideal kink stability analysis identifies a target plasma, with parameters similar to that of the reference equilibrium reconstructed from a MAST high-pressure discharge, that accesses the RWM regime. The unstable n=1 RWM for the target equilibrium is subject to strong damping by the plasma toroidal flow and/or the drift kinetic effects from thermal particles. As a result, the mode is found to be stable under the experimental flow conditions, or even without flow stabilization if drift kinetic stabilization is included. The stability prediction is robust against variation of the assumed resistive wall minor radius. Active magneto-hydrodynamic (MHD) spectroscopy modeling, using the magnetic coils designed for controlling the edge localized modes (ELMs) in MAST-U as the antenna, shows strong resonant field amplification due to a stable RWM response in the target plasma. Maximal amplification, of 6-7 times larger than the applied vacuum field within the plasma, is obtained assuming a coil phasing of 120-180 degrees between the upper and lower rows of the ELM control coils. The MHD-kinetic hybrid model predicts generally higher RFA than the fluid model, in particular near the low-field and high-field sides of the plasma boundary surface. Furthermore, the MARS-F/K modeling thus shows that the RWM in MAST-U is subject to strong flow and kinetic stabilization, but can nevertheless be detected by active MHD spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1984

Resonant absorption of phase-mixed Alfven surface waves in ideal and resistive magnetohydrodynamics - Initial-value problem

An initial-value approach to the study of Alfven surface waves, in which the linearized MHD equations are solved numerically in time and space, is considered. A disturbance of a particular wavelength is excited in a nonuniform plasma and its temporal evolution is simulated with numerical solutions of the ideal and resistive MHD equations in slab geometry. This procedure generates a continuous spectrum and therefore simulates phase-mixing and subsequent resonant absorption. Energy in the phase-mixed surface waves resistively dissipates with the absorption time and width scaling as resistivity to the -1/3 and 1/6 powers, respectively.

Steinolfson, R. S.↗
DOE OSTI2024

Resistive hose modes in tokamak runaway electron beams

Beams of energetic runaway electrons are generated during disruptions in tokamaks, and fluid models are used to study their effects on macroscale dynamics. Linear computations of a massless, runaway electron beam coupled to MHD plasma show that resistive hose instabilities grow faster than tearing modes at large resistivity. Eigenvalue results with reduced models of the resistive hose instability are compared with results from the full MHD and beam system, showing that the resistive hose decouples from any plasma response. An estimate of plasma temperature at which growth of the resistive hose dominates tearing for post-disruption DIII-D plasma parameters is in a physically relevant regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

W7-X and the sawtooth instability: towards realistic simulations of current-driven magnetic reconnection

Magnetic reconnection in W7-X is studied by means of global numerical simulations in a series of models of increasing complexity. The magnetic geometry ranges from that of a cylinder to the full three-dimensional field of W7-X, and the equations solved range from ideal magnetohydrodynamics (MHD) to gyrokinetics. We simulate plasmas from the first operation phase with electron cyclotron current drive (ECCD). These are characterized by an equilibrium magnetic field featuring an ECCD-distorted 'humped' profile of the rotational transform ι, with ι = 1 in two radial locations. Such plasmas generally show sawtooth activity, hence motivating the present study. We pay particular attention to the role of equilibrium current density gradients in the destabilization of reconnecting modes. When the equilibrium temperature and density gradients are artificially suppressed (to eliminate the pressure gradient drive), the perturbed electrostatic potential is radially localized between the locations at which ι = 1. This is shown with a purely collisionless gyrokinetic model, in cylindrical geometry. In the real toroidal geometry of W7-X, for a non-ideal MHD model including a uniform resistivity, electron inertia and (numerical) viscosity, the same qualitative behaviour is observed. In particular, even if a resonant (m, n) = (1, -1) perturbation is initialized, the most unstable mode is the (m, n) = (-4, 4), where m and n are the poloidal and toroidal mode numbers, respectively. Other modes are destabilized due to geometric coupling. The growth rate of this instability scales as η 1/3 , where η is the plasma resistivity, thus suggesting that ECCD drives ideal MHD stable W7-X plasmas towards non-ideal marginality. An ideal magnetohydrodynamic analysis confirms the result. A fluid-kinetic hybrid version of the EUTERPE code shows that gyrokinetic ions have a stabilizing effect on these modes. For W7-X relevant collisionalities, the growth rate scales linearly with the electron skin depth, d e . Implications of our results for sawtoothing W7-X operation are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1988

Mechanisms for fast flare reconnection

Normal collisional-resistivity mechanisms of magnetic reconnection have the drawback that they are too slow to explain the fast rise of solar flares. Two methods are examined which are proposed for the speed-up of the magnetic tearing instability: the anomalous enhancement of resistivity by the injection of MHD turbulence and the increase of Coulomb resistivity by radiative cooling. The results are described for nonlinear numerical simulations of these processes which show that the first does not provide the claimed effects, while the second yields impressive rates of reconnection, but low saturated energy outputs.

Vanhoven, G.↗
DOE OSTI2020

Stable compression of a spherical tokamak plasma

In this study, an analysis of toroidal plasma compression by a collapsing flux conserver reveals linearly stable scenarios of operation to high compression ratios. The resistive and ideal MHD stability is calculated in full toroidal geometry using the asymptotic matching method in realistic conditions. A time dependent MHD simulation of the compression is conducted to confirm the conservation principles used to calculate the equilibrium states for the analysis. The near edge current profile, controlled by toroidal field ramping during compression, is shown to be critical to stability due to coupling between poloidal components of the least stable mode. Two cases with slight differences in edge current are examined, one with a stable corridor to high compression and one without.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A stable corridor for toroidal plasma compression

In this study, a toroidal plasma compressed by a collapsing flux conserver is analyzed to reveal stable scenarios of operation to high compression ratios. The resistive and ideal MHD stability is calculated in full toroidal geometry, using the asymptotic matching method in realistic conditions, and comparing with nonlinear simulations. The near edge current profile, controlled by toroidal field ramping during compression, is shown to be critical to stability due to coupling between poloidal components of the least stable mode. The extension of a length of shaft on axis is also found to be critical at high compression, as the resulting good curvature region in magnetic field stabilizes pressure driven modes that would otherwise be unstable. This work extends from previous studies, which initially showed the existence of a stable scenario, to include findings of more extensive stable zones, detailed effects of geometry, and nonlinear simulations of the instabilities. The nonlinear simulations of the compression are consistent with the linear analyses, confirming both the conservation and stability properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Divertor detachment in the pre-fusion power operation phase in ITER during application of resonant magnetic perturbations

Detachment of the divertor plasma during application of resonant magnetic perturbation (RMP) fields is evaluated for hydrogen H-mode plasma during the first pre-fusion power operation (PFPO-1) phase in ITER by 3D plasma boundary modelling with EMC3–EIRENE. Plasma response effects from a linearized, resistive, single fluid MHD model are discussed, which includes partial screening of the externally applied field—but also field amplification near the separatrix. Furthermore, this field amplification is found to play a pivotal role for the magnetic footprint on the divertor targets, but is sensitive to model parameters. Extensions of the footprint beyond the straight portions of the ITER vertical divertor targets, optimized for high stationary heat flux handling, may be possible depending on the level of toroidal rotation in the plasma. Exhaust from the bulk plasma is guided by the helical corrugations (lobes) of the perturbed separatrix, and this results in an upstream heat flux that is distributed over these lobes with lower peak values than in the typical radial heat flux profiles seen in the absence of magnetic perturbations. As a consequence, an earlier onset (with respect to the upstream density) of detachment is found in the traditional strike zone when RMPs are applied, but secondary, non-axisymmetric strike locations appear—and those remain attached at temperatures above 10 eV. Neon seeding can mitigate these non-axisymmetric heat loads, but this becomes less efficient for large magnetic footprints.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1979

Is the galactic corona produced by galactic flares?

The effect of the differential rotation of the disk of the Galaxy on magnetic field which penetrates the disk is considered. The magnetic field will be progressively distorted from a potential (current-free) form and will at some stage become unstable. It is expected that an MHD instability, a resistive instability, or a combination of the two, will result in the release of the excess magnetic energy and that part of the released energy will be converted into heat. By estimating the energy release and the rate at which this process will occur and by assuming that this energy input is balanced by radiation, estimates were obtained of the parameters of the resulting plasma. It appears that this process alone can heat a galactic corona to temperatures of order 10 to the 6th power K.

Sturrock, P. A.↗
NASA NTRS1980

Is the galactic corona produced by galactic flares

The effect of the differential rotation of the disk of the galaxy on magnetic field which penetrates the disk is considered. The magnetic field will be progressively distorted from a potential (current-free) form and will at some stage become unstable. We expect, from knowledge of solar flares, that an MHD instability, a resistive instability, or a combination of the two, will result in the release of the excess magnetic energy, and that part of the released energy will be converted into heat. By estimating the energy release and the rate at which this process will occur and by assuming that this energy input is balanced by radiation, we obtain estimates of the parameters of the resulting plasma. It appears that this process alone can heat a galactic corona to temperatures of order one-million K.

Sturrock, P. A.↗