Results for “reduced set methods” — Page 6

DOE OSTI2026

Offline Maximizing Minimally Invasive Proper Orthogonal Decomposition for Reduced-Order Modeling of S n Radiation Transport

Deterministic solutions to the Sn radiation transport equation can be computationally expensive to calculate. Reduced-order modeling enables efficient approximation of the full-order model (FOM) solution. We propose a novel method for constructing reduced-order models (ROMs) of the S n radiation transport equation, offline maximizing minimally invasive (OMMI) proper orthogonal decomposition (POD). POD uses the method of snapshots to create a reduced-order basis for constructing an ROM. Minimally invasive POD leverages the sweep infrastructure existing in deterministic transport codes to create a POD-based ROM, even when infeasible by traditional methods. Offline maximizing minimally invasive proper orthogonal decomposition (OMMI-POD) extends minimally invasive POD by performing sweeps offline, therefore maximizing the potential speedup. OMMI-POD does so by creating a library of reduced systems from a training set. This library of reduced systems is then interpolated to provide a rapid approximate solution of the S n radiation transport equation. The model is evaluated on a set of test problems, achieving a low error with a 466 times speedup over the FOM. Also presented is a study of the effect of sampling method on the performance of OMMI-POD, specifically comparing naive uniform sampling to the more accurate and computationally expensive greedy sampling.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1993

Trajectory optimization based on differential inclusion

A method for generating finite-dimensional approximations to the solutions of optimal control problems is introduced. By employing a description of the dynamical system in terms of its attainable sets in favor of using differential equations, the controls are completely eliminated from the system model. Besides reducing the dimensionality of the discretized problem compared to state-of-the-art collocation methods, this approach also alleviates the search for initial guesses from where standard gradient search methods are able to converge. The mechanics of the new method are illustrated on a simple double integrator problem. The performance of the new algorithm is demonstrated on a 1-D rocket ascent problem ('Goddard Problem') in presence of a dynamic pressure constraint.

Seywald, Hans↗

NASA NTRS1993

Trajectory optimization based on differential inclusion

A method for generating finite-dimensional approximations to the solutions of optimal control problems is introduced. By employing a description of the dynamical system in terms of its attainable sets in favor of using differential equations, the controls are completely eliminated from the system model. Besides reducing the dimensionality of the discretized problem compared to state-of-the-art collocation methods, this approach also alleviates the search for initial guesses from where standard gradient search methods are able to converge. The mechanics of the new method are illustrated on a simple double integrator problem. The performance of the new algorithm is demonstrated on a I-D rocket ascent problem ('Goddard Problem') in presence of a dynamic pressure constraint.

Seywald, Hans↗

NASA NTRS1993

Trajectory optimization based on differential inclusion

A method for generating finite-dimensional approximations to the solutions of optimal control problems is introduced. By employing a description of the dynamical system in terms of its attainable sets in favor of using differential equations, the controls are completely eliminated from the system model. Besides reducing the dimensionality of the discretized problem compared to state-of-the-art collocation methods, this approach also alleviates the search for initial guesses from where standard gradient search methods are able to converge. The mechanics of the new method are illustrated on a simple double integrator problem. The performance of the new algorithm is demonstrated on a 1-D rocket ascent problem (`Goddard Problem') in presence of a dynamic pressure constraint.

Seywald, Hans↗

DOE OSTI2026

Reducing the Cost of CCSD Basis Set Extrapolation in Ab Initio Computational Thermochemistry

Here, a series of approximations to CCSD contributions in computational model chemistries is presented in the context of kcal mol –1 , kJ mol –1 , and 20 cm –1 theoretical predictions of total atomization energies, benchmarked within the HEAT+CH 4 test suite. A specific set of circumstances where MP2, without empirical scaling, may be used as an effective intermediate in the first two of these accuracy ranges was determined. However, SDQ-MP4, a method long used in pursuit of kcal mol –1 accuracy but relatively unstudied in the subchemical accuracy community, offers significant improvement over the quality of MP2 as a basis-set intermediate at significantly reduced cost compared to CCSD. Given this, we argue for SDQ-MP4 as the de facto CCSD basis-set intermediate in sub-chemical accuracy calculations when CCSD in a desired basis set becomes unaffordable. We additionally report on a “CBS-like” scheme, where MP2 and SDQ-MP4 are used in conjunction to create a “cheap” three-part approximation of large CCSD basis set limits. The data for the CCSD approximation schemes are organized in such a way that model chemistry developers can locate an analog of their current approach for the CCSD basis set limit and explore alternative intermediates that either decrease computational cost or increase computational accuracy. We also show, for a handful of molecules, that SDQ-MP4 shows promise as an effective basis-set intermediate for harmonic and fundamental frequency computations, allowing for zero-point corrections of nearly CCSD(T)/ANO1 quality using simple composite methods that only require CCSD(T)/ANO0.

Thorpe, James H. [Argonne National Laboratory (ANL↗

DOE OSTI2024

Optimizing dynamic wireless charging for electric buses: A data-driven approach to infrastructure planning

The network configuration significantly impacts the performance of dynamic wireless charging (DWC) technology for electric buses. Here, this study presents a novel approach to planning charging infrastructure for public transit using data-driven nonconvex mixed-integer optimization. Integrating DWC and charging station technologies reveals a trade-off between enroute and stationary charging times. Our framework optimizes bus frequency settings and transmitter coil arrangements to minimize operational and infrastructure costs. A case study in Chattanooga, Tennessee, demonstrates the method's effectiveness in mitigating range anxiety and reducing charging expenses. This research implies that integrating DWC technology into public transit systems can enhance the feasibility and cost-effectiveness of electric bus operations, promoting sustainable urban mobility.

33 ADVANCED PROPULSION SYSTEMS↗

NASA NTRS2017

SpaRibs Geometry Parameterization for Wings with Multiple Sections using Single Design

The SpaRibs topology of an aircraft wing has a significant effect on its structural behavior and stability as well as the flutter performance. The development of additive manufacturing techniques like Electron Beam Free Form Fabrication (EBF3) has made it feasible to manufacture aircraft wings with curvilinear spars, ribs (SpaRibs) and stiffeners. In this article a new global-local optimization framework for wing with multiple sections using curvilinear SpaRibs is described. A single design space is used to parameterize the SpaRibs geometry. This method has been implemented using MSC-PATRAN to create a broad range of SpaRibs topologies using limited number of parameters. It ensures C0 and C1 continuities in SpaRibs geometry at the junction of two wing sections with airfoil thickness gradient discontinuity as well as mesh continuity between all structural components. This method is advantageous in complex multi-disciplinary optimization due to its potential to reduce the number of design variables. For the global-local optimization the local panels are generated by an algorithm which is totally based on a set algebra on the connectivity matrix data. The great advantage of this method is that it is completely independent of the coordinates of the nodes of the finite element model. It is also independent of the order in which the elements are distributed in the FEM. The code is verified by optimizing of the CRM Baseline model at trim condition at Mach number equal to 0.85 for five different angle of attack (-2deg, 0deg,2deg,4deg and 6deg). The final weight of the wing is 19,090.61 lb. This value is comparable to that obtained by Qiang et al. 6 (19,269 lb).

wing sections↗

NASA NTRS1978

A dual assault upon turbulence

All known calculation methods incorporate some sort of turbulence model to reduce the infinite hierarchy of equations, under Reynolds' averaging, to a finite set. All such models suffer from a certain ad hoc nature. A dual structure model was developed wherein the turbulence field is, somewhat arbitrarily, decomposed into large eddies which presumably are dominant contributors to the Reynolds' stress and small eddies which feed on the large eddies as these, in turn feed upon the average flow to gain their energy. These concepts have been developed into a dual approach, one extractive and the other predictive as outlined below.

Payne, F. R.↗

NASA NTRS1988

Preliminary design of two transpacific high-speed civil transport

Two high-speed civil transport (HSCT) design concepts are presented. Both transports are designed for a 5500-n.m. range with 300 passengers. The first design concept is a Mach 2.5, joined-wing, single-fuselage transport. The second design concept is a Mach-4.0, twin-fuselage, variable-sweep wing transport. The use of conventional hydrocarbon fuels is emphasized to reduce the amount of change required in current airport facilities. Advanced aluminums are used in the designs when possible to reduce material and production costs over more exotic materials. Methods to reduce airport noise, community noise, and fly-over noise are incorporated into the designs. In addition, requirements set forth by the Federal Aviation Regulations (FARs) have been addressed.

Source record↗

NASA NTRS2010

Implications of Microwave Holography Using Minimum Required Frequency Samples for Weakly- and Strongly-Scattering Indications

Microwave imaging techniques, an integral component of nondestructive testing and evaluation (NDTE), have received significant attention in the past decade. These techniques have included the implementation of synthetic aperture focusing (SAF) algorithms for obtaining high spatial resolution images. The next important step in these developments is the implementation of 3-D holographic imaging algorithms. These are well-known wideband imaging technique requiring a swept-frequency (i.e., wideband), which unlike SAF that is a single frequency technique, are not easily performed on a real-time basis. This is due to the fact that a significant number of data points (in the frequency domain) must be obtained within the frequency band of interest. This not only makes for a complex imaging system design, it also significantly increases the image-production time. Consequently in an attempt to reduce the measurement time and system complexity, an investigation was conducted to determine the minimum required number of frequency samples needed to image a specific object while preserving a desired maximum measurement range and range resolution. To this end the 3-D holographic algorithm was modified to use properlyinterpolated frequency data. Measurements of the complex reflection coefficient for several samples were conducted using a swept-frequency approach. Subsequently, holographical images were generated using data containing a relatively large number of frequency samples and were compared with images generated by the reduced data set data. Quantitative metrics such as average, contrast, and signal-to-noise ratio were used to evaluate the quality of images generated using reduced data sets. Furthermore, this approach was applied to both weakly- and strongly-scattering indications. This paper presents the methods used and the results of this investigation.

Fallahpour, M.↗

NASA NTRS2011

Fixed Eigenvector Analysis of Thermographic NDE Data

Principal Component Analysis (PCA) has been shown effective for reducing thermographic NDE data. This paper will discuss an alternative method of analysis that has been developed where a predetermined set of eigenvectors is used to process the thermal data from both reinforced carbon-carbon (RCC) and graphiteepoxy honeycomb materials. These eigenvectors can be generated either from an analytic model of the thermal response of the material system under examination, or from a large set of experimental data. This paper provides the details of the analytic model, an overview of the PCA process, as well as a quantitative signal-to-noise comparison of the results of performing both conventional PCA and fixed eigenvector analysis on thermographic data from two specimens, one Reinforced Carbon-Carbon with flat bottom holes and the second a sandwich construction with graphite-epoxy face sheets and aluminum honeycomb core.

Cramer, K. Elliott↗

NASA NTRS2004

Using Redundancy To Reduce Errors in Magnetometer Readings

A method of reducing errors in noisy magnetic-field measurements involves exploitation of redundancy in the readings of multiple magnetometers in a cluster. By "redundancy"is meant that the readings are not entirely independent of each other because the relationships among the magnetic-field components that one seeks to measure are governed by the fundamental laws of electromagnetism as expressed by Maxwell's equations. Assuming that the magnetometers are located outside a magnetic material, that the magnetic field is steady or quasi-steady, and that there are no electric currents flowing in or near the magnetometers, the applicable Maxwell 's equations are delta x B = 0 and delta(raised dot) B = 0, where B is the magnetic-flux-density vector. By suitable algebraic manipulation, these equations can be shown to impose three independent constraints on the values of the components of B at the various magnetometer positions. In general, the problem of reducing the errors in noisy measurements is one of finding a set of corrected values that minimize an error function. In the present method, the error function is formulated as (1) the sum of squares of the differences between the corrected and noisy measurement values plus (2) a sum of three terms, each comprising the product of a Lagrange multiplier and one of the three constraints. The partial derivatives of the error function with respect to the corrected magnetic-field component values and the Lagrange multipliers are set equal to zero, leading to a set of equations that can be put into matrix.vector form. The matrix can be inverted to solve for a vector that comprises the corrected magnetic-field component values and the Lagrange multipliers.

Kulikov, Igor↗

NASA NTRS1975

The probability of a correct output from a combinational circuit

The paper discusses two methods to evaluate the signal reliability of the output of logical circuits. It is known that faults present in a circuit will not always cause the output of the circuit to be incorrect. The first method evaluates the contribution of each fault to the reliability of the circuit and requires the enumeration of the behavior of each fault in the entire fault set. The use of McCluskey and Clegg's characterization of faulty networks by evaluating the functional equivalence classes of the network is a way to reduce the amount of computation involved. The second method uses a probabilistic model of logical circuits and consists of straightforward operations which can easily be automated. The method also yields the signal reliability and has the capability of very easily specifying the individual fault probabilities of all the circuit lines independently.

Ogus, R. C.↗

NASA NTRSDate not supplied

Alternate Methods of Model Reduction to Avoid Dynamic Modal Truncation Error

Loads analysis is traditionally performed using dynamically reduced models, which provides the benefit to reduce run time. If the reduced model frequency cutoff is not chosen appropriately, the model will lack the dynamic content required to fully represent the response of the non-reduced model. Standard guidance for reduced model frequency content, provided in NASA-STD-5002, is to solve fixed base modes up to a minimum of 1.5x the model frequency content of interest and to employ static modal truncation methods such as residual vectors, the mode acceleration method, and the residual flexibility method to account for the truncated flexibility of the missing modes. Fixed base modes require the selection of a set of degrees of freedom to be constrained which, if not properly selected, may affect the accuracy of the reduced model by excluding some of the dynamic characteristic of the full model. In this case, the standard NASA guidance would be insufficient, but it may not be readily apparent that a portion of the reduced model response is missing. This error was encountered during an independent verification and validation (IV&V) effort, where it was observed that the resulting dynamic response was lower than the inline analysis. In this specific case, despite following the standard NASA model reduction guidelines in the selection of the frequency cutoff, the inline model still did not fully capture the necessary dynamic content. As part of the IV&V, an alternate reduction methodology was employed using an unconstrained mode acceleration method. The original model initially performed a constrained reduction to twice the frequency content of interest before doing a free-free run, employing the mode acceleration method to account for the truncated modes. In contrast in the IV&V, the unconstrained model reduced directly to the needed frequency content of the free-free run, avoiding any interactions between constraints and dynamic content. To verify the model, the original reduction methodology was used to generate a series of Hurty-Craig-Bampton reductions, each with a higher frequency cutoff than the previous. The results were shown to converge once the frequency cutoff increased past eight times the frequency content of interest. At the same frequency cutoff, the results of the Hurty-Craig-Bampton model converged with the results of the unconstrained mode acceleration model. This comparative study provided confidence that the results of the unconstrained modal acceleration reduced model were correct and that the Hurty-Craig-Bampton needed to increase its frequency cutoff to fully capture the dynamic response.

Erin Simmons↗

NASA NTRSDate not supplied

Alternate Methods of Model Reduction to Avoid Dynamic Modal Truncation Error

Loads analysis is traditionally performed using dynamically reduced models, which provides the benefit to reduce run time. If the reduced model frequency cutoff is not chosen appropriately, the model will lack the dynamic content required to fully represent the response of the non-reduced model. Standard guidance for reduced model frequency content, provided in NASA-STD-5002, is to solve fixed base modes up to a minimum of 1.5x the model frequency content of interest and to employ static modal truncation methods such as residual vectors, the mode acceleration method, and the residual flexibility method to account for the truncated flexibility of the missing modes. Fixed base modes require the selection of a set of degrees of freedom to be constrained which, if not properly selected, may affect the accuracy of the reduced model by excluding some of the dynamic characteristic of the full model. In this case, the standard NASA guidance would be insufficient, but it may not be readily apparent that a portion of the reduced model response is missing. This error was encountered during an independent verification and validation (IV&V) effort, where it was observed that the resulting dynamic response was lower than the inline analysis. In this specific case, despite following the standard NASA model reduction guidelines in the selection of the frequency cutoff, the inline model still did not fully capture the necessary dynamic content. As part of the IV&V, an alternate reduction methodology was employed using an unconstrained mode acceleration method. The original model initially performed a constrained reduction to twice the frequency content of interest before doing a free-free run, employing the mode acceleration method to account for the truncated modes. In contrast in the IV&V, the unconstrained model reduced directly to the needed frequency content of the free-free run, avoiding any interactions between constraints and dynamic content. To verify the model, the original reduction methodology was used to generate a series of Hurty-Craig-Bampton reductions, each with a higher frequency cutoff than the previous. The results were shown to converge once the frequency cutoff increased past eight times the frequency content of interest. At the same frequency cutoff, the results of the Hurty-Craig-Bampton model converged with the results of the unconstrained mode acceleration model. This comparative study provided confidence that the results of the unconstrained modal acceleration reduced model were correct and that the Hurty-Craig-Bampton needed to increase its frequency cutoff to fully capture the dynamic response.

Erin Simmons↗

NASA NTRS1981

Computational methods of robust controller design for aerodynamic flutter suppression

The development of Riccati iteration, a tool for the design and analysis of linear control systems is examined. First, Riccati iteration is applied to the problem of pole placement and order reduction in two-time scale control systems. Order reduction, yielding a good approximation to the original system, is demonstrated using a 16th order linear model of a turbofan engine. Next, a numerical method for solving the Riccati equation is presented and demonstrated for a set of eighth order random examples. A literature review of robust controller design methods follows which includes a number of methods for reducing the trajectory and performance index sensitivity in linear regulators. Lastly, robust controller design for large parameter variations is discussed.

Anderson, L. R.↗

NASA NTRS1987

A Modal-Parameter Extraction Procedure

Procedure accommodates multiple input excitations. Improved modalparameter extraction procedure applicable to linear, time-invariant systems derived in 92-page report. Algorithm allows multiple noncoherent input excitations applied to structure and generates consistent set of modal parameters. Procedure extension of simultaneous frequency-domain (SFD) techniques achieved through investigation of two automatic methods for reducing effective problem size while minimizing amount of user interaction. In several sample runs, independentcoordinate reduction method shown more accurate method for small sample size. Principle-component method used to estimate number of modes active in given frequency range.

Kurdila, A. H.↗

NASA NTRS1988

On the stability, storage capacity, and design of nonlinear continuous neural networks

The stability, capacity, and design of a nonlinear continuous neural network are analyzed. Sufficient conditions for existence and asymptotic stability of the network's equilibria are reduced to a set of piecewise-linear inequality relations that can be solved by a feedforward binary network, or by methods such as Fourier elimination. The stability and capacity of the network is characterized by the post synaptic firing rate function. An N-neuron network with sigmoidal firing function is shown to have up to 3N equilibrium points. This offers a higher capacity than the (0.1-0.2)N obtained in the binary Hopfield network. Moreover, it is shown that by a proper selection of the postsynaptic firing rate function, one can significantly extend the capacity storage of the network.

Guez, Allon↗