Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radial distribution functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Energetic electrons in the magnetosphere of Saturn

The energy spectra and angular distributions of electrons observed by Pioneer 11 as a function of radial distance in the inner magnetosphere of Saturn are reanalyzed and phase space densities are then calculated. The radial dependence of phase space density requires a distributed loss process. The loss is greatest in the region of the E ring (5.5 less than L less than 8.5) and is attributed to collisions with the ring particles in agreement with earlier work by Van Allen et al. (1980). Quantitative analysis yields the following properties of the E ring: the particle radii are in the range of 4 x 10(exp -5) to 3.2 x 10(exp -4) cm and the thickness of the ring is approximately 3 R(sub s). Between the inner edge of the E ring (5.5 R(sub s)) and the outer edge of the A ring (2.3 R(sub s)) there are more energetic electrons than can be supplied by radial diffusion from an external source. Detailed calculations show that a cosmic ray albedo neutron decay (CRAND) source in the A and B rings is a plausible source for this excess. The radial diffusion coefficient required to explain the E ring absorption and CRAND source for electrons is 1 x 10(exp -12) greater than D(sub 0) greater than 3 x 10(exp -12) R(exp 2, sub s)/s, assuming that D(sub LL) = D(sub 0)L(exp 3). As part of the reanalysis program, a method for the deconvolution of pitch angle distributions observed by simple detectors on a rotating spacecraft is developed. This process removes the instrumental response and rotational smear due to finite sampling periods and yields true angular distributions.

Randall, B. A.↗

The radial gradients and collisional properties of solar wind electrons

The plasma electron detector on Mariner 10 is used to obtain measurements of electron density and temperature in the interplanetary medium between heliocentric distances of 0.85 and 0.45 AU. The observations show quantitatively that the core of the electron distribution function can be described as collisional at least for radial distances within 1 AU, since with a very few well-marked exceptions associated with high-speed streams, the Coulomb collisional momentum relaxation length is less than the density scale height at all times and all radial distances at which data were obtained. It is found that the Coulomb energy exchange collisions between the core and the (test) halo population are negligible. The power law exponent of the core temperature is about -0.3, whereas the halo temperature is almost independent of heliocentric distance.

Ogilvie, K. W.↗

Performance of computer-optimized tapered-roller bearings to 2.4 million DN

The performance of 120.65 mm bore high speed design tapered roller bearings was investigated at shaft speeds to 20,000 rpm under combined thrust and radial load. The test bearing design was computer optimized for high speed operation. Temperature distribution and bearing heat generation were determined as a function of shaft speed, radial and thrust loads, lubricant flow rates, and lubricant inlet temperature. The roller bearing operated successfully at shaft speeds up to 20,000 rpm under heavy thrust and radial loads. Cup cooling was effective in decreasing the high cup temperatures to levels equal to the cone temperature.

Parker, R. J.↗

An ultrasonic transducer with Gaussian radial velocity distribution

A transducer with a velocity profile which is Gaussian as a function of radius and independent of angle is described. In materials evaluation applications requiring the interrogation of modified far field patterns of an ultrasonic transducer, it is desirable to use a transducer which produces a beam with a Gaussian profile. A computer aided electrode design and calibrated three dimensional interferometric optical and ultrasonic measurements of the far field distribution are presented.

Zerwekh, P. S.↗

Ultrasonic transducer with Gaussian radial pressure distribution

An ultrasonic transducer that produces an output that is a symmetrical function comprises a piezoelectric crystal with several concentric ring electrodes on one side of the crystal. A resistor network applies different amplitudes of an ac source to each of the several electrodes. A plot of the different amplitudes from the outermost electrode to the innermost electrode is the first half of a Gaussian function. Consequently, the output of the crystal from the side opposite the electrodes has a Gaussian profile.

Claus, R. O.↗

Tone excited jets. III - Flow measurements

This paper describes the effects of upstream excitation on the flow characteristics of tone-excited jet under static as well as simulated forward velocity conditions. The data presented include axial and radial distributions of mean velocities and turbulence intensities as functions of excitation conditions. Results for both unheated and heated jets are presented. The measured distributions of pressures associated with the large-scale turbulence are also presented for some test conditions.

Lepicovsky, J.↗

Pick-up ions at Comet P/Halley's bow shock - Observations with the IIS spectrometer on Giotto

Gaseous material expanding from the nucleus of Comet Halley into space forms the neutral coma around the comet. Ionization in the solar UV radiation removes particles from the coma and injects them into the solar wind plasma. These freshly created ions are accelerated by the interplanetary electric field on cycloidal trajectories with gyrocenters moving with the speed of the magnetic field lines. In the solar wind frame of reference these particles move along the magnetic field lines with a fixed pitch angle. Pitch-angle scattering and energy diffusion reduce quickly the initial energy anisotropy which is associated with the narrow pick-up structures. First observations of heavy cometary pick-up ions (water group ions) at the bow shock are presented. The evolution of the distribution function in the vicinity of the shock and radial density profiles are discussed.

Wilken, B.↗

Measurement of Apparent Thermal Conductivity of JSC-1A Under Ambient Pressure

The apparent thermal conductivity of JSC-1A lunar regolith simulant was measured experimentally using a cylindrical apparatus. Eleven thermocouples were embedded in the simulant bed to obtain the steady state temperature distribution at various radial, axial, and azimuthal locations. The high aspect ratio of a cylindrical geometry was proven to provide a one-dimensional, axisymmetric temperature field. A test series was performed at atmospheric pressure with varying heat fluxes. The radial temperature distribution in each test fit a logarithmic function, indicating a constant thermal conductivity throughout the soil bed. However, thermal conductivity was not constant between tests at different heat fluxes. This variation is attributed to stresses created by thermal expansion of the simulant particles against the rigid chamber wall. Under stress-free conditions (20 deg C), the data suggest a temperature independent apparent conductivity of 0.1961 +/- 0.0070 W/m/ deg C

Yuan, Zeng-Guang↗

Laser Induced Fluorescence Measurements in a Hall Thruster Plume as a Function of Background Pressure

A set of Laser Induced Fluorescence (LIF) measurements in the near-field region of the NASA- 173M Hall thruster plume is presented at four background pressure conditions varying from 9.4 x 10(exp -6) torr to 3.3 x 10(exp -5) torr. The xenon ion velocity distribution function was measured simultaneously along the axial and radial directions. An ultimate exhaust velocity of 19.6+/-0.25 km/s achieved at a distance of 20 mm was measured, and that value was not sensitive to pressure. On the other hand, the ion axial velocity at the thruster exit was strongly influenced by pressure, indicating that the accelerating electric field moved inward with increased pressure. The shift in electric field corresponded to an increase in measured thrust. Pressure had a minor effect on the radial component of ion velocity, mainly affecting ions exiting close to the channel inner wall. At that radial location the radial component of ion velocity was approximately 1000 m/s greater at the lowest pressure than at the highest pressure. A reduction of the inner magnet coil current by 0.6 A resulted in a lower axial ion velocity at the channel exit while the radial component of ion velocity at the channel inner wall location increased by 1300 m/s, and at the channel outer wall location the radial ion velocity remained unaffected. The ultimate exhaust velocity was not significantly affected by the inner magnet current.

Facility Effects↗

Performance of large-bore tapered-roller bearings under combined radial and thrust load at shaft speeds to 15,000 rpm

The performance of 120.65-mm bore tapered roller bearings was investigated at shaft speeds up to 15,000 rpm. Temperature distribution and bearing heat generation were determined as a function of shaft speed, radial and thrust loads, lubricant flow rate, and lubricant inlet temperature. Lubricant was supplied by either jets or by a combination of holes through the cone directly to the cone-rib contact and jets at the roller small-end side. Cone-rib lubrication significantly improved high-speed tapered-roller bearing performance, yielding lower cone-face temperatures and lower power loss and allowing lower lubricant flow rates for a given speed condition. Bearing temperatures increased with increased shaft speed and decreased with increased lubricant flow rate. Bearing power loss increased with increased shaft speed and increased lubricant flow rate.

Parker, R. J.↗

Explorer 45 observations of the proton ring current

Explorer 45 satellite data on the stormtime proton ring current are reported and analyzed. Storm-associated variations of equatorially mirroring protons, interactions between the ring current and the plasmapause, and storm recovery phase behavior are discussed. Pitch-angle distributions are plotted as a function of proton energy and radial distance, the structure implying domination of pitch-angle diffusion of ring-current protons in the plasmapause region by resonant interactions with ion cyclotron waves during storm recovery. The anisotropic precipitation in the plasmapause region and the more poleward isotropic precipitation observed at low altitudes outside the plasmapause are compared and distinguished.

Lyons, L. R.↗

The energetic ion substorm injection boundary

In this paper, 167 dispersionless energetic ion injections which were observed by AMPTE CCE are identified. The radial and local time distribution of the events as a function of kp is qualitatively similar to that envisioned in the injection boundary model of Mauk and McIlwain (1974). It is argued that particles observed during dispersionless injections are locally energized during the disruption of the cross-tail current sheet. Therefore, the injection boundary is identified as derived from the spatial distribution of dispersionless injections, with the earthward edge of the region of the magnetotail which undergoes current sheet disruption during the substorm expansion phase. It is shown that this qualitative model for the generation of the injection boundary can provide an explanation for the dispersionless nature, the double spiral shape, and the Kp dependence of the boundary.

Lopez, R. E.↗

Mathematical model of the current density for the 30-cm engineering model thruster

Mathematical models are presented for both the singly and doubly charged ion current densities downstream of the 30-cm engineering model thruster with 0.5% compensated dished grids. These models are based on the experimental measurements of Vahrenkamp at a 2-amp ion beam operating condition. The cylindrically symmetric beam of constant velocity ions is modeled with continuous radial source and focusing functions across 'plane' grids with similar angular distribution functions. A computer program is used to evaluate the double integral for current densities in the near field and to obtain a far field approximation beyond 10 grid radii. The utility of the model is demonstrated for (1) calculating the directed thrust and (2) determining the impingement levels on various spacecraft surfaces from a two-axis gimballed, 2 x 3 thruster array.

Cuffel, R. F.↗

A convected kappa distribution model for hot ions in the Jovian magnetodisc

Hot ion angular anisotropies measured by the Low Energy Charged Particle (LECP) instrument during the Voyager 2 encounter with the Jovian dayside outer magnetosphere (60-30 RJ) have been fitted to a 2 species convected kappa distribution function using a nonlinear least squares technique. The resulting parameters are well constrained by the data. The heavy ion species was assumed to be either sulfur or oxygen of unknown charge. The light species was assumed to be protons. The bulk flow speeds deduced from the model were found, contrary to some theories, to increase with increasing radial distance from Jupiter within the radial region addressed, remaining a substantial fraction (0.6) of the rigid corotation speed. Agreement with the averaged Voyager Plasma Science results was obtained near 30 RJ. The core Maxwellian temperature of the heavy ion distribution functions (30-100 keV) increased with increasing radial distance, following the trend anticipated from the corotation pickup of heavy ions. The proton temperature (20 keV) remained nearly constant.

Kane, M.↗

System efficiency of a microwave power tube with a multistage depressed collector

The efficiencies of a microwave power tube with a multistage depressed collector and of the power supply driving the tube are computed. An analytical expression for the collector efficiency, which includes the effect of secondary emission and the radial component of velocity, is derived for a hypothetical current probability distribution function. In addition, collector efficiency is calculated with the aid of a digital computer for a specific current distribution. The efficiency of the power supply required to operate the tube in a space environment is estimated by using a simple parallel inverter system.

Dayton, J. A., Jr.↗

Energetic electrons in the Jovian magnetosphere

Results are reported for a detailed analysis of Pioneer 10 data on energetic particle species in the magnetodisk region of Jupiter's magnetosphere. It is shown that the observed counting rates in the magnetodisk (beyond 20 Jupiter radii) were caused primarily by electrons with energies exceeding 0.06 MeV. Absolute omnidirectional electron intensities in the magnetodisk are presented for five integral energy ranges, and a model electron differential energy spectrum is found to fit the intensities throughout most of the encounter trajectory. It is suggested that the observed spectral shape results from losses of high-energy electrons by pitch-angle scattering. Observed equatorial energy spectra are used to compute distribution functions for several values of the first adiabatic invariant, mu. The radial profiles of the functions are found to have maxima at about 50 Jupiter radii inbound as well as at about 90 radii outbound and to diminish strongly for lesser radii. The large decreases in density are shown to require strong losses, and resonant electron whistler-mode pitch-angle scattering is suggested as a loss mechanism.

Baker, D. N.↗

The dissociation of OH and OD in comets by solar radiation

Calculations of the radiative lifetimes of cometary OH are presented as a function of the radial velocity of the comet and of the velocity distributions of the hydrogen and oxygen atoms produced by photodissociation of OH. The contribution of the photodissociation of OH to the emission of the red and green lines of atomic oxygen is assessed. An estimate is made of the lifetime of OD and of the velocity distribution of the deuterium atoms.

Van Dishoeck, E. F.↗