Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “profit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A Hydrogen Load Modeling Method for Integrated Hydrogen Energy System Planning: Preprint

The integrated hydrogen energy system incorporates hydrogen energy into the power grid, which has been recognized as a promising option for reaching a 100% renewable electricity supply. It can make a profit because the hydrogen produced can be sold as fuel or used to generate electricity for grid services. In this paper, we develop a planning model for the integrated hydrogen energy system that considers the uncertainty of the load demand, the renewable energy generation, and the market prices. To calculate the hydrogen load, we simulate the refueling operations at a hydrogen fueling station over the course of one day. Moreover, the long-term profitability of the integrated system under both cur-rent and future conditions is compared in the planning results.

active distribution network↗
DOE OSTI2022

Computer-aided process intensification of natural gas to methanol process

The recent revolution in shale gas has presented opportunities for distributed manufacturing of key commodity chemicals, such as methanol, from methane. However, the conventional methane-to-methanol process is energy intensive which negatively affects the profitability and sustainability. Here an intensified process configuration that is both economically attractive and environmentally sustainable. This flowsheet is systematically discovered using the building block-based representation and optimization methodology. The new process configuration utilizes membrane-assisted reactive separations and can have as much as 190% higher total annual profit compared to a conventional configuration. Additionally, it has 57% less CO 2 -equivalent greenhouse gas emission. Such drastic improvement highlights the advantages of building block-based computer-aided process intensification method.

42 ENGINEERING↗
DOE OSTI2021

Environmental and cost benefits of multi‐purpose buffers in an agricultural watershed for biomass production

Abstract The cost‐benefit of riparian buffers to landowners has not been fully understood despite its ecosystem benefits. This study investigates the environmental and economic value of multi‐purpose buffers for biomass production under alternative land‐management scenarios at the watershed scale. The work incorporates the Soil and Water Assessment Tool with a field‐scale tool, the Agriculture Conservation Practice Framework, and cost‐benefit analysis. Our work took place in the agriculturally dominant Raccoon River watershed (RRW) in Iowa. The cost analysis includes implementing and harvesting the switchgrass buffers, the value of nitrogen and phosphorus fertilizer, and the forgone income of cropland to determine the net return under 12 alternative feedstock scenarios. We estimated that 14 603 Mg of nitrogen and 2563 Mg of phosphorus runoffs can be intercepted by riparian buffers in the RRW, representing a nutrient loss reduction of 11% of nitrogen and 26% of phosphorus. These nutrients are valued at $1.31 million (M) for phosphorus and $1.24 M for nitrogen as fertilizers. The trapped nutrients account for 12% of the riparian buffers’ total cost. We found that net economic returns increase with biomass market price, increase with maintenance fertilizer application, and decrease with the cropland areas that are converted to buffers. Under current land management, a biomass market price at $60 per dry ton of biomass would be economically viable at the sub‐basin level when maintenance fertilizers are applied. At $80 per dry ton, all 108 sub‐basins in the RRW would be profitable up to $517 a year. The results highlight the trade‐offs between water quality and profitability. Published 2021. This article is a U.S. Government work and is inthe public domain in the USA. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗
DOE OSTI2023

Modeling Farmers’ Adoption Potential to New Bioenergy Crops: An Agent-Based Approach

The use of fossil fuels is the primary source of greenhouse gas emissions but there are alternatives to these especially in the form of biofuels, fuels derived from bioenergy crops. This paper aims to determine farmers’ potential adoption rates of newly introduced bioenergy crops with a specific example of carinata in the state of Georgia. The determination is done using an agent-based modeling technique with two principal assumptions—farmers are profit maximizer and they are influenced by neighboring farmers. Two diffusion parameters (traditional and expansion) are followed along with two willingness (high and low) scenarios to switch at varying production economics to carinata and other prominent traditional field crops (cotton, peanuts, corn) in the study region. We find that a contract prices around $9, $8 and $7 can be a viable option for encouraging farmers to adopt carinata in low, average, and high profit conditions, respectively. Expansion diffusion (that diffuses all over the geographical area), rather than centered to the few places like traditional diffusion at the early stage of adoption in conjunction with higher willingness conditions influences higher adoption rates in the short-term. As such, the model can be used to understand the behavioral economics of carinata in Georgia and beyond, as well as offering a potential tool to study similar bioenergy crops.

Ullah, Kazi↗
DOE OSTI2022

Combining Simulation and Optimization to Derive Operating Policies for a Concentrating Solar Power Plant

Optimizing short-term decisions over a rolling horizon and/or using deterministic penalties to capture system stochasticity can lead to myopic policies that fail to consider unplanned events and their long-term adverse effects. We present a methodology that integrates an off-line optimization model with a simulation procedure to determine the profitability of different operating strategies; specifically, the latter is used to generate additional constraints for the former when failures occur according to system component operating lifetimes that (i) are subject to exogenous uncertainty, and (ii) may degrade more quickly under specific operating conditions. We use the feedback provided by the simulation model in a parametric analysis to obtain penalties that can be used in short-term operations scheduling to maximize the long-term revenues obtained by the optimization model. We apply this research to a concentrating solar power plant; our results show that the methodology can be used to choose an operating policy that balances maximizing profit while accounting for maintenance costs. Integrating the optimization model with a simulation procedure reveals that aggressive prices for cycling yield about 55% fewer startups and 30% fewer failures compared to using a more typical start-up operating strategy, and can save hundreds of thousands to millions of dollars in repair costs over the lifetime of the plant.

concentrating solar power↗
DOE OSTI2020

Techno-economic prospects for producing Fischer-Tropsch jet fuel and electricity from lignite and woody biomass with CO 2 capture for EOR

This work explores the prospective techno-economic performance of facilities that produce low- and net-negative-carbon liquid transportation fuels and electricity with CO 2 capture for enhanced oil recovery. The lignite and biomass-to-jet fuel process is based on KBR’s TRIG gasifier, Rectisol (for sulfur removal and CO 2 capture), fixed-bed low temperature Fischer-Tropsch synthesis of liquid fuels, and Brayton/Rankine combined cycles to convert synthesis/refining off-gases and waste heat to electricity. This work leverages a recent, highly-detailed assessment of a prospective first-of-a-kind (FOAK) demonstration facility to develop highly detailed Aspen Plus process simulations for nine prospective N th -of-a-kind (NOAK) plant equipment configurations. Component-level capital costs from the FOAK study are scaled and adjusted to reflective prospective learning-by-doing to estimate capital costs for the NOAK designs. NOAK plant economic performance is found to be largely insensitive to variations in plant configurations and electricity output fraction, but biomass input fraction significantly affects profitability. Facilities that consume only carbon–neutral biomass, with no lignite co-feed, have significantly net-negative carbon emissions and the most favorable prospective economics when carbon emissions are priced. For these facilities, the crude oil price required for plant economic viability falls rapidly from $\$$100/bbl as carbon emission prices increase above $\$$120/tonne CO 2eq . In general, plants that co-fire lignite with biomass are less profitable (than 100% biomass plants) due to their higher net greenhouse gas emissions.

09 BIOMASS FUELS↗
DOE OSTI2025

Benchmarking thermal energy storage cost for industrial process heat

Process heat accounts for roughly half of industrial energy demand, and currently 95% of process heat is derived from the combustion of natural gas, oil, and coal. Electrification of industrial heating could be an alternative, potentially expanding locations suitable for manufacturing; however, industrial facility owners may desire energy storage to stabilize energy costs. In this work, the economic benefits of pairing thermal storage with electrified process heat to reduce the average price paid for energy are analyzed. Cost savings focus on energy arbitrage, or leveraging flexible energy pricing schemes, alone. The cost of natural gas combustion across decades (2019-2060) is compared to the costs of electricity and thermal energy storage in four United States Independent System Operator (ISO) regions. Systems installed today may not yield positive net present value (NPV) compared to the use of natural gas. However, using estimated electricity prices, systems installed in 2030 using arbitrage alone could be profitable when compared to natural gas in some regions of the U.S. Furthermore, if capital expenditures could be reduced by 50% for sensible thermal storage systems by 2030, profitable systems are found across all regions. This implies that electrification of industrial process heat, when paired with inexpensive thermal energy storage systems, could be less expensive than brownfield natural gas systems, using arbitrage as the only source of revenue and without a dependency on any future policy drivers such as pricing externalities that could further incentivize the electrification of industrial process heat.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Growing grasses in unprofitable areas of US Midwest croplands could increase species richness

The US has large potential to grow perennial energy crops, but because these crops are rarely grown in current agricultural landscapes, it is unclear how biodiversity may be affected. Over time, as agriculture has increased, many grassland species have declined. In addition, not all agricultural land is profitable for growing annual crops. Unprofitable areas were responsible for a loss of approximately $110 million USD per year from 2013 to 2016. Based on this, we want to know how converting less-profitable portions of agricultural fields to switchgrass, a native prairie grass, would influence species occurrence. To address this question, we developed an alternative landscape in which clustered corn/soy acres with a low return on investment (ROI) were replaced with grassland. We also developed and validated species distribution models to predict changes in species occurrence for 28 avian species in Iowa in response to landscape management. Furthermore, we compared results for three different models: Random forest (RF), Stochastic gradient boosting (GBM), and Neural network (Nnet) and found that all models performed well and predicted similar species distribution. Predicted species richness increased by 3.66% (RF), 2.79% (GBM), and 7.51% (Nnet) when we simulated a change in management for ~3% of Iowa's low ROI corn/soybean areas to grassland. If harvested, these areas could generate approximately 7.6 million dry tons/year of switchgrass for bioenergy, thereby increasing farmers earnings. Unprofitable areas tended to occur along streams, which suggest that incorporating partially harvested riparian buffers can benefit avian biodiversity, while improving water quality and reducing unnecessary costs for farmers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Evaluating the potential of plastic waste upcycling using thermochemical technologies: A case study in Spain

A plastic waste upcycling value chain model has been applied to assess the potential of processing packaging waste in Spain using thermo-chemical technologies to produce low-density polyethylene (LDPE) and polypropylene (PP), which are highly valuable materials. The model projects an annual profit of 120.6 M$\$$/yr, with a capital investment of 789.3 M$\$$, generating 3285 jobs and contributing 65.5 M$\$$/yr to Spain’s economy. The achieved circularity rate of the waste processing infrastructure exceeds 40 %, incorporating recycled HDPE and PET. Despite these advantages, regulatory gaps and market hesitancy toward recycled materials due to quality concerns hinder adoption. Additionally, economies of scale remain underutilized in Spain due to lower plastic waste collection levels compared to countries such as the United States. This network, while less profitable, is environmentally superior, yielding upcycled products with a Global Warming Potential 20–35 % lower than their virgin, fossil-fuel counterparts, confirming this as a viable and sustainable alternative.

Chemical upcycling↗
DOE OSTI2022

Turbine scale and siting considerations in wind plant layout optimization and implications for capacity density

Improvements in wind energy technology, reduced costs, and ambitious clean energy goals have led to projections of high wind contribution in coming years. Developing methodologies to design wind plants with a variety of siting constraints and turbine sizes helps enable high wind penetration, and gain a better understanding of how wind plants are sensitive to setback constraints and turbine design. In this paper, we present a two-step optimization method to simultaneously determine the optimal number of turbines and their locations in a wind plant domain divided into many small, discrete parcels. We present the optimized performance metrics of a wind plant optimized with different turbine sizes and ratings, and with different siting restrictions within the wind plant. Our results indicate that taller and larger turbines are more sensitive to increasing siting constraints. We also compare the optimal wind plant layouts and performance for wind plants optimized for minimum COE and maximum profit. Wind plants optimized for profit had 130%-190% of the capacity of plants optimized for COE, which demonstrates that the optimal results are greatly affected by the objective function, which should be carefully considered. Finally, in this paper we demonstrate the effect of increasing siting constraints on wind plant capacity density, and how the results change when different land areas are used to calculate capacity density. When using the entire wind plant boundary area to determine capacity density, increasing siting constraints decreases the capacity density. However, when we only use the available area (the area left after removing the siting constraints) to calculate the capacity density, increasing the siting constraints increases capacity density. This is a critical insight because of how capacity density is typically defined and used in research, and has important implications for assessment of technical potential and capacity expansion modeling, as well as future wind deployment potential.

17 WIND ENERGY↗
DOE OSTI2025

A bilevel multistage stochastic self-scheduling model with indivisibilities for trading in the continuous intraday electricity market

In this paper, we study the profit maximization problem of a virtual power plant trading in the continuous intraday electricity market. Our virtual power plant model is compatible with renewable, and thermal assets, covering a range of virtual power plants currently participating in energy markets. We model the trading problem as a bilevel multistage stochastic program. The upper level of the problem accounts for the profit maximization of the virtual power plant with explicit modeling of the technical constraints of the operational status of the thermal power plant including minimum start-up and shut-down times, ramp-up and ramp-down rates, and minimum generation level. The upper level also decides which continuous and indivisible (fill-or-kill) orders are submitted to the market. The lower-level problem accounts for the clearing of the continuous intraday market, i.e., matching of buy and sell orders. Because of the presence of fill-or-kill orders, the lower-level problem is mixed-integer, which prevents its direct conversion to a single-level problem using duality. In order to solve this challenging problem, we develop a convex-hull extended formulation for the lower-level problem, apply duality theory to obtain a single-level stochastic equivalent formulation, and employ McCormick envelopes to turn the problem into a multistage stochastic mixed-integer linear problem, which we solve using the stochastic dual dynamic integer programming algorithm. We conduct numerical experiments and analyze the optimal trading behavior of a virtual power plant trading in an ideal continuous market without arbitrage.

Bilevel multistage stochastic programming problem↗
DOE OSTI2023

Dispatch analysis of flexible power operation with multi-unit small modular reactors

The relevance of nuclear power plant flexible power operation (FPO) is rising due to increased penetration of variable renewables. Small Modular Reactors (SMRs) such as NuScale are envisaged to have multiple units on one site. This provides opportunities for coordinating FPO between units, but also introduces challenges as common services (e.g., refueling equipment) must be shared between units and fuel loadings may be standardized. It is therefore important to quantify whether FPO with SMRs is economically beneficial. Here, this paper quantifies the economics of FPO on different timescales to analyze refueling outages of such multi-unit SMRs. A 24-h price-taker profit maximization of SMR operation is first solved considering revenues from wholesale power and ancillary service (AS) markets. The results are then used to find the most profitable operation strategy over several years for multiple units at the site accounting for the physics and materials limits on NPP operation, including refueling outages. Results show a small but appreciable participation of nuclear into AS, contributing 4% of revenues. Due to the longer fuel cycle, over a decade of operation the units’ refueling outages drifted by 3 months, ultimately leading to refueling during summer.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2027

Market participation strategy of hybrid energy resources: A New York ISO case study

Drawing on existing market designs with independent resource participation in electricity markets, this study analyzes participation models for hybrid resources combining renewable generation and storage. Two models are considered: in the first, the components operate independently, with the Independent System Operator (ISO) managing the storage state of charge (SoC); in the second, the hybrid resource acts as an integrated unit, submitting offers as a “black box” and managing its SoC internally. Using a production cost model for the zonal New York Bulk Power System, we evaluate trade-offs in system reliability, market efficiency, and asset profitability. Our results provide several key insights for policymakers, showing that the ISO-managed granular model enhances social welfare through explicit SoC management, while the simpler integrated model is more computationally efficient, but may cause more real-time violations and lower overall profits.

Bansal, Rajni Kant↗
DOE OSTI2025

Modeling distributed energy resource aggregations in security constrained unit commitment and economic dispatch

The Federal Energy Regulatory Commission (FERC) recently issued Order 2222, which requires all wholesale electricity markets in the US to allow distributed energy resources (DERs) to participate in the market as aggregated resources. These DER aggregations may be composed of many individual resources that are offered and dispatched by the market as a single entity. We present here a model of a distributed energy resource aggregator (DERA) that is scheduled by a market operator’s security constrained unit commitment (SCUC) and security constrained economic dispatch (SCED). The DERA model includes constraints for battery energy storage systems (BESSs), demand response resources (DRRs), and a simple distributed energy resource (DER). This paper describes a model for each resource type and presents two methods for the DERA to generate market offer curves: a profit-maximizing optimization to compute cost curves and a direct cost algorithm to determine dispatch costs for each resource and combine into cost curves. Once all participating DERAs are scheduled in SCUC/SCED, the model is then modified to dispatch individual DERs to maximize profit or minimize schedule deviation of the DERAs. A simulation of a representative day illustrates the DERA offers, the scheduled generation, and the DERA dispatch. Findings show the potential for unavoidable schedule deviations due to internal DER constraints and due to economic incentives to deviate from the SCUC/SCED schedules. This highlights the importance of DERA offer construction on market efficiency and system reliability. Novel aspects of our approach include: (1) We consider the asymmetry of price incentives impacting DERAs from the wholesale market compared to those impacting consumers from the retail market, as imposed by current regulations and laws. (2) We model aggregate consumer response through statistically parameterizable utility functions rather than a potentially impractical approach of modeling each individual consumer. (3) We show how to use the DERA operational dispatch model to create offers into the wholesale electricity market. (4) We show how DERAs may fail to meet their scheduled dispatch because the market offer format may not permit them to fully express their operational features such as intertemporal costs and constraints to the market.

aggregations↗
DOE OSTI2023

Influences on hydrogen production at a wind farm

If an affordable infrastructure for low-carbon-intensity hydrogen can be developed, then hydrogen is expected to become a key factor in decarbonizing the atmosphere. This research focuses on factors an existing wind farm operator would consider when weighing participating in the electricity market, the hydrogen market, or both. The solutions depend on the state of technology, which is changing rapidly, the local market structures, the local natural resources, and the local pre-existing infrastructure. Consequently, this investigation used an assessment approach that examined the variation of net present value. The investigation identified profitability conditions under three different scenarios: 1) Make and sell what makes economic sense at the time of production, 2) Use electrolyzer and fuel cell to consume power from the grid at times of low net demand and to produce electricity at times of high net demand, 3) Same as #2 but also market hydrogen directly when profitable.

08 HYDROGEN↗
DOE OSTI2020

Simulating policy interventions in the interfirm diffusion of low-carbon technologies: An agent-based evolutionary game model

Policy interventions are frequently used by authorities around the world to mitigate carbon emissions. However, economic systems are essentially complex adaptive systems, which often exhibit unexpected responses to exogenous interventions and leave intervenors in a dilemma, even if the interventions are elaborately designed. To explore the behaviors of the diffusion system regarding low-carbon technologies, this study builds an agent-based model (ABM) to simulate enterprises' reactions to multiple policy interventions aimed at spurring low-carbon technology diffusion. The simulated enterprises are in a complex network where they play evolutionary games with their neighbors, which enables the model to possess two critical features of economic systems: adaptiveness and equilibrium. The model reveals a dilemma of policy interventions: intuitively, carbon taxes, asymmetric penalties (only imposed on un-low-carbon enterprises) and subsidies can improve the diffusion, which is consistent with previous research; counter-intuitively, all these policies turn out to be inefficient or even harmful to low-carbon enterprises because of the diffusion system's high adaptiveness. Specifically, when carbon taxes and penalties increase, both the low-carbon and un-low-carbon enterprises end up with the equilibrium of equivalent but lower profits. In contrast, all the enterprises earn equivalent but more profits even though subsidies are only given to the low-carbon enterprises, which implies that the un-low-carbon enterprises (indirectly) grab a portion of the subsidies and accordingly weaken the incentive effect of subsidies. These system behaviors are summarized as "equalizing effect" because the system tends to equalize the impact of both positive and negative interventions among all enterprises even though the policy interventions are asymmetrically imposed on one type of the enterprises. The findings also indicate that policies implemented to enlarge green market sizes can help policymakers bypass the dilemma.

Agent-based modeling↗
DOE OSTI2020

Better management practices for environmentally sustainable production of microalgae and algal biofuels

The commercialization of biofuels produced from microalgae is in its infancy; therefore, many resource-management practices and production processes are still flexible. The purpose of this paper is to guide development of supply chains toward more environmentally sustainable practices. Furthermore, in this work, we review current and projected technologies and practices for autotrophic microalgae cultivation that promote environmental sustainability. We develop a framework that leverages these studies to propose better management practices (BMPs) for water quality and quantity, biodiversity, or greenhouse gas emissions in concert with productivity and profitability considerations. Some proposed BMPs are linked to numerical environmental targets, such as percent reductions in nutrient loadings to streams, whereas others seek to avoid thresholds leading to adverse health or ecological effects. Still others involve using the best available technologies, developed iteratively through life-cycle and techno-economic analyses. Proposed BMPs for microalgae cultivation focus on water quality and quantity, as well as improving greenhouse gas (GHG) emissions to obtain advanced biofuel designation. BMPs must allow producers to meet productivity and profitability targets, as well as environmental targets. These example BMPs characterize the state of science and engineering; thus, they will change over time.

09 BIOMASS FUELS↗
DOE OSTI2024

Sensitivity analysis, surrogate modeling, and optimization of pebble-bed reactors considering normal and accident conditions

This research provides a valuable tool that streamlines the optimization process while significantly increasing its accuracy. This study creates a robust framework for reactor design optimization by incorporating comprehensive modeling using the Comprehensive Reactor Analysis Bundle, or BlueCRAB, within the Multiphysics Object-Oriented Simulation Environment (MOOSE). BlueCRAB is the United States Nuclear Regulatory Commission's code suite for non-light water reactor analysis and includes the Griffin, Pronghorn, and Bison applications. This not only improves the efficiency of the optimization process but also enhances the reliability of the results. Such a tool is essential for advancing the state-of-the-art in pebble-bed reactor technology and is critical for achieving the goals of Generation IV reactors, which aim for safe, sustainable, and economically viable nuclear energy solutions. This work presents and applies this workflow on pebble-bed reactors while considering both normal and off-normal conditions. A representative gas-cooled pebble-bed reactor at equilibrium core conditions serves as the nominal design specification for normal operation and is based on previous research. The depressurized loss-of-forced-cooling accident is deployed for off-normal conditions in this work. After defining design-related parameters and quantities of interest regarding reactor safety and performance, this multiphysics model is sampled using the MOOSE stochastic tools module. The result is a comprehensive dataset of configurations, enabling sensitivity analysis and the generation of surrogate models. Subsequently, the dataset and surrogate models are employed in two optimization studies aimed at maximizing fuel utilization and economic profit while adhering to safety and operational constraints. Performing the optimization process with fuel utilization as the metric leads to an improvement of approximately 10%, compared to engineering-judgment-based nominal conditions. The optimization on economic profit leads to an estimated increase of ~300 million USD over the lifetime of the reactor.

97 MATHEMATICS AND COMPUTING↗