Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “premise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Energy Conversion Alternatives Study (ECAS), General Electric Phase 1. Volume 1: Executive summary

A data base for the comparison of advanced energy conversion systems for utility applications using coal or coal-derived fuels was developed. Estimates of power plant performance (efficiency), capital cost, cost of electricity, natural resource requirements, and environmental intrusion characteristics were made for ten advanced conversion systems. Emphasis was on the energy conversion system in the context of a base loaded utility power plant. All power plant concepts were premised on meeting emission standard requirements. A steam power plant (3500 psig, 1000 F) with a conventional coal-burning furnace-boiler was analyzed as a basis for comparison. Combined cycle gas/steam turbine system results indicated competitive efficiency and a lower cost of electricity compared to the reference steam plant. The Open-Cycle MHD system results indicated the potential for significantly higher efficiency than the reference steam plant but with a higher cost of electricity.

Corman, J. C.↗

Disintegration phenomena in Comet West

Two peculiarities of Comet West, the multiple splitting of the nucleus as seen in telescope observations and the complex structure of the dust tail, are discussed. A method of analysis based on the premise that the observed rate of separation of a fragment from the principal nucleus is determined by the difference in effective solar attraction acting on the bodies is applied to investigate the motion of the four fragments that separated from the nucleus of Comet West. The predicted motion of the fragments is in good agreement with available observations. It is suggested that the 'synchronic' bands of the dust tail consist of tiny fragments from relatively large particles that burst after release from the comet. The unusual orientation of these bands and their high surface brightness relative to the diffuse tail are explained by a sudden increase in the particle acceleration and in the total scattering surface as the result of the disintegration of the larger particles.

Sekanina, Z.↗

Compensating for environmental variability in the thermal inertia approach to remote sensing of soil moisture

A procedure is developed for removing data scatter in the thermal-inertia approach to remote sensing of soil moisture which arises from environmental variability in time and space. It entails the utilization of nearby National Weather Service air temperature measurements to normalize measured diurnal surface temperature variations to what they would have been for a day of standard diurnal air temperature variation, arbitrarily assigned to be 18 C. Tests of the procedure's basic premise on a bare loam soil and a crop of alfalfa indicate it to be conceptually sound. It is possible that the technique could also be useful in other thermal-inertia applications, such as lithographic mapping.

Idso, S. B.↗

Developments in new aircraft tire tread materials

Comparative laboratory and field tests were conducted on experimental and state-of-the-art aircraft tire tread materials in a program aimed at seeking new elastomeric materials which would provide improved aircraft tire tread wear, traction, and blowout resistance in the interests of operational safety and economy. The experimental stock was formulated of natural rubber and amorphous vinyl polybutadiene to provide high thermal-oxidative resistance, a characteristic pursued on the premise that thermal oxidation is involved both in the normal abrasion or wear of tire treads and probably in the chain of events leading to blowout failures. Results from the tests demonstrate that the experimental stock provided better heat buildup (hysteresis) and fatigue properties, at least equal wet and dry traction, and greater wear resistance than the state-of-the-art stock.

Yager, T. J.↗

Study of diffusion coefficients of glasses under Zero-G

A diffusion experiment for glasses was formulated, such theoretical and earth bound results as were available were outlined, and the preliminary earth based experimental work in preparation for a weightless experiment was done. The fundamental premise of the work was that diffusion studies of the glass forming ion can be conducted in zero-g environments, and diffusion data obtained from these experiments are unique and valuable because of earth based experimental difficulties.

Kinser, D. L.↗

The effect of the liquid-solid system properties on the interline heat transfer coefficient

A theoretical procedure to determine the heat transfer characteristics of the interline region of an evaporating meniscus using the macroscopic optical and thermophysical properties of the system is outlined. The analysis is based on the premise that the interline transport processes are controlled by the London-van der Waals forces between condensed phases (solid and liquid). The procedure is used to compare the relative size of the interline heat sink of various systems using a constant heat flux model. This solution demonstrates the importance of the interline heat flow number which is evaluated for various systems. The heat transfer characteristics of the decane-steel system are numerically compared with those of the carbon tetrachloride-quartz system.

Wayner, P. C., Jr.↗

IBIS - A geographic information system based on digital image processing and image raster datatype

IBIS (Image Based Information System) is a geographic information system which makes use of digital image processing techniques to interface existing geocoded data sets and information management systems with thematic maps and remotely sensed imagery. The basic premise is that geocoded data sets can be referenced to a raster scan that is equivalent to a grid cell data set. The first applications (St. Tammany Parish, Louisiana, and Los Angeles County) have been restricted to the design of a land resource inventory and analysis system. It is thought that the algorithms and the hardware interfaces developed will be readily applicable to other Landsat imagery.

Bryant, N. A.↗

The search for life on Mars - Viking 1976 gas changes as indicators of biological activity

The objective of the gas exchange experiment (GEX) in the Viking lander biology instrument package is to determine whether life exists in a 1-cc Martian soil sample delivered to it. The GEX is capable of maximum flexibility while protecting the indigenous organisms from exposure to physiologically incompatible medium. The discussion covers the biological premises implemented in the GEX, the requirements for the GEX M4 medium, the operational aspects of the incubation chamber, nonbiological and biological changes, and Antarctica soil experiment. Sources of biological gas changes are examined along with ways of differentiating biological gas changes from nonbiological ones. From cold incubation of low-frequency soils, it is concluded that decisive negative tests of GEX may require extended incubations beyond the nominal mission plan of 60 days, barring any outright information that negates the presence of life on Mars.

Oyama, V. I.↗

Infrared studies of star formation

Infrared observations at wavelengths of a few microns to 1 mm are reviewed which pertain to the problem of star formation. The data considered include observations of large gas and dust clouds within which stars may be forming and detailed studies of individual objects within these clouds. Stages of star formation are outlined, the IR luminosity of forming stars is examined, and criteria for selecting interstellar regions for IR studies are discussed along with the importance of dust in the IR energy distributions of star-formation regions. Detailed results, including IR maps, are evaluated for the Orion Molecular Cloud 1 (OMC-1), W3, OMC-2, Mon R2, RCW 57, M17, CRL 2591, and NGC 7538. Some general properties of star-formation regions are summarized, and observational techniques for IR astronomy are described. It is noted that the discovery of possible pre-main-sequence (PMS) objects in the densest central portions of larger clouds supports the generally accepted premise of gravitational collapse as the driving mechanism for the star-formation process and that the observed properties of possible PMS objects agree qualitatively with the predictions of detailed models based on gravitational collapse.

Werner, M. W.↗

Reducing LANDSAT data to parameters with physical significance and signature extension: A view of LANDSAT capabilities

The premise is the LANDSAT is capable of sensing only a few physical parameters. Much of the contrast provided in LANDSAT data is provided by differences in vegetation cover. Although dominant, vegetation is not the only physical parameter that can be detected with LANDSAT; a ratio of MSS Channel 5 to MSS Channel 4 (R5,4), two visible channels, separates materials by color hue. Additional information is attained by the addition of MSS channels 5 and 4 to approximate brightness, permitting separation of materials by color value. Other spectral combinations may provide correlations with these physical parameters or new ones. An iron absorption in the infrared can also be recognized in LANDSAT data when iron content is present in sufficient percentages, Although by color, limonite-rich soils are distinctive as bright yellow, they are not unique in the R5,4. A fairly strong iron absorption is present in the infrared band MSS Channel 7 for these soils, although the wideband configuration of LANDSAT is not optimal for its enhancement and the effects of vegetation often obscure it.

Salmon-Drexler, B. C.↗

Computer program for determining mass properties of a rigid structure

A computer program was developed for the rapid computation of the mass properties of complex structural systems. The program uses rigid body analyses and permits differences in structural material throughout the total system. It is based on the premise that complex systems can be adequately described by a combination of basic elemental shapes. Simple geometric data describing size and location of each element and the respective material density or weight of each element were the only required input data. From this minimum input, the program yields system weight, center of gravity, moments of inertia and products of inertia with respect to mutually perpendicular axes through the system center of gravity. The program also yields mass properties of the individual shapes relative to component axes.

Hull, R. A.↗

Microprocessor utilization in search and rescue missions

The position of an emergency transmitter may be determined by measuring the Doppler shift of the distress signal as received by an orbiting satellite. This requires the computation of an initial estimate and refinement of this estimate through an iterative, nonlinear, least squares estimation. A version of the algorithm was implemented and tested by locating a transmitter on the premises and obtaining observations from a satellite. The computer used was an IBM 360/95. The position was determined within the desired 10 km radius accuracy. The feasibility of performing the same task in real time using microprocessor technology, was determined. The least squares algorithm was implemented on an Intel 8080 microprocessor. The results indicate that a microprocessor can easily match the IBM implementation in accuracy and be performed inside the time limitations set.

Schwartz, M.↗

The effect of the London-van der Waals dispersion force on interline heat transfer

A theoretical procedure to determine the heat transfer characteristics of the interline region (junction of liquid-solid-vapor) from the macroscopic optical and thermophysical properties of the system is outlined. The analysis is based on the premise that the interline transport processes are controlled by the London-van der Waals dispersion force between condensed phases (solid and liquid). Numerical values of the dispersion constant are presented. The procedure is used to compare the relative size of the interline heat sink of various systems using a constant heat flux mode. This solution demonstrates the importance of the interline heat flow number, which is evaluated for various systems.

Wayner, P. C., Jr.↗

Cosmic-ray streaming perpendicular to the mean magnetic field. II - The gyrophase distribution function

The distribution function of cosmic rays streaming perpendicular to the mean magnetic field in a turbulent medium is reexamined. Urch's (1977) discovery that in quasi-linear theory, the flux is due to particles at 90 deg pitch angle is discussed and shown to be consistent with previous formulations of the theory. It is pointed out that this flux of particles at 90 deg cannot be arbitrarily set equal to zero, and hence the alternative theory which proceeds from this premise is dismissed. A further, basic inconsistency in Urch's transport equation is demonstrated, and the connection between quasi-linear theory and compound diffusion is discussed.

Forman, M. A.↗

Mass properties of a rigid structure

Program MASPROP rapidly calculates mass properties of complex, rigid structural systems. Its basic premise is that complex systems can be adequately described by combination of basic elementary structural shapes.

Gilbert, J. L.↗

User's instructions for the erythropoiesis regulatory model

The purpose of the model provides a method to analyze some of the events that could account for the decrease in red cell mass observed in crewmen returning from space missions. The model is based on the premise that erythrocyte production is governed by the balance between oxygen supply and demand at a renal sensing site. Oxygen supply is taken to be a function of arterial oxygen tension, mean corpuscular hemoglobin concentration, oxy-hemoglobin carrying capacity, hematocrit, and blood flow. Erythrocyte destruction is based on the law of mass action. The instantaneous hematocrit value is derived by integrating changes in production and destruction rates and accounting for the degree of plasma dilution.

Source record↗

Plasma in the Jovian current sheet

A large body of spectral data for protons with energies greater than 200 keV has been analyzed. It is concluded that the main body of plasma in the Jovian current sheet observed by Pioneer 10 on its outbound pass probably has an energy well below the lowest threshold of the Pioneer 10 detectors. This premise is examined using a semiempirical model of the magnetic field in the magnetodisk and simple magnetohydrodynamic theory. Results indicate that the dominant contribution to the plasma pressure in the region from 25 to 65 Jovian radii is from as yet unobserved protons (ions) with energies of the order of 0.1 to 10 keV.

Goertz, C. K.↗

Large eddy simulation - A predictive approach to turbulent flow computation

The filtering approach (Leonard, 1974) to large eddy simulation is described. Large eddy simulation is then surveyed with reference to subgrid scale models, numerical methods, channel flow, and free shear flows. It is concluded that the premise of LES (i.e., that the small eddies are much easier to model than the large ones) seems to be borne out by computational experience to date. The greatest obstacle in LES at present is the lack of computer power which effectively denies the ability to simulate all the significant eddies in flows of interest.

Ferziger, J. H.↗