Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “predictive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Observations and theory of Mg II lines in early type stars. II - Theory and predicted profiles. III - The observations and a comparison with the predictions

Profiles of the UV Mg II lines in the spectra of early type stars are computed in a grid of model atmospheres with effective temperatures between 8000 and 35,000 K and log g values of 2.5 to 4.0 using the LTE and non-LTE theories of line formation. The theoretical results indicate that the line cores are strengthened by non-LTE effects over the entire temperature range, resonance-line wings are weaker in the cooler models than in the LTE case, and very large deviations from LTE occur in the hot low-gravity models. These predictions are compared with the equivalent widths of the UV Mg II lines in 106 stars and of the visual lines in 48 stars (spectral types O4 to A3). The observed equivalent widths of normal stars in luminosity classes II through V are found to agree with the predictions over the entire range from O8 to A2 if a certain Mg/H abundance is adopted. The line intensities observed in supergiants, Be, Bp, and Ap stars are discussed.

Snijders, M. A. J.↗
NASA NTRS1979

Solar-terrestrial Predictions Proceedings. Volume 1: Prediction Group Reports

The current practice in solar terrestrial predictions is reviewed with emphasis of prediction, warning, and monitoring services. Topics covered include: ionosphere-reflected HF radio propagation; radiation hazards for manned space flights and high altitude and high latitude aircraft flights; and geomagnetic activity.

Donnelly, R. F.↗
NASA NTRS1989

Noise produced by turbulent flow into a rotor: Theory manual for atmospheric turbulence prediction and mean flow and turbulence contraction prediction

Prediction of helicopter main rotor noise due to ingestion of atmospheric turbulence was analyzed. The analysis combines several different models that describe the fluid mechanics of the turbulence and the ingestion process. Two models, atmospheric turbulence, and mean flow and turbulence contraction were covered. The third model, covered in a separate report, describes the rotor acoustic mode. The method incorporates the atmospheric turbulence model and a rapid distortion turbulence contraction description to determine the statistics of the anisotropic turbulence at the rotor plane. The analytical basis for a module was provided which was incorporated in NASA's ROTONET helicopter noise prediction program. The mean flow and turbulence statistics associated with the atmospheric boundary layer were modeled including effects of atmospheric stability length, wind speed, and altitude. The turbulence distortion process is modeled as a deformation of vortex filaments (which represent the turbulence field) by a mean flow field due to the rotor inflow.

Simonich, J. C.↗
NASA NTRS1993

Perpendicular blade vortex interaction and its implications for helicopter noise prediction: Wave-number frequency spectra in a trailing vortex for BWI noise prediction

Perpendicular blade vortex interactions are a common occurrence in helicopter rotor flows. Under certain conditions they produce a substantial proportion of the acoustic noise. However, the mechanism of noise generation is not well understood. Specifically, turbulence associated with the trailing vortices shed from the blade tips appears insufficient to account for the noise generated. The hypothesis that the first perpendicular interaction experienced by a trailing vortex alters its turbulence structure in such a way as to increase the acoustic noise generated by subsequent interactions is examined. To investigate this hypothesis a two-part investigation was carried out. In the first part, experiments were performed to examine the behavior of a streamwise vortex as it passed over and downstream of a spanwise blade in incompressible flow. Blade vortex separations between +/- one eighth chord were studied for at a chord Reynolds number of 200,000. Three-component velocity and turbulence measurements were made in the flow from 4 chord lengths upstream to 15 chordlengths downstream of the blade using miniature 4-sensor hot wire probes. These measurements show that the interaction of the vortex with the blade and its wake causes the vortex core to loose circulation and diffuse much more rapidly than it otherwise would. Core radius increases and peak tangential velocity decreases with distance downstream of the blade. True turbulence levels within the core are much larger downstream than upstream of the blade. The net result is a much larger and more intense region of turbulent flow than that presented by the original vortex and thus, by implication, a greater potential for generating acoustic noise. In the second part, the turbulence measurements described above were used to derive the necessary inputs to a Blade Wake Interaction (BWI) noise prediction scheme. This resulted in significantly improved agreement between measurements and calculations of the BWI noise spectrum especially for the spectral peak at low frequencies, which previously was poorly predicted.

Devenport, William J.↗
NASA NTRS2000

Predictive and Neural Predictive Control of Uncertain Systems

Accomplishments and future work are:(1) Stability analysis: the work completed includes characterization of stability of receding horizon-based MPC in the setting of LQ paradigm. The current work-in-progress includes analyzing local as well as global stability of the closed-loop system under various nonlinearities; for example, actuator nonlinearities; sensor nonlinearities, and other plant nonlinearities. Actuator nonlinearities include three major types of nonlineaxities: saturation, dead-zone, and (0, 00) sector. (2) Robustness analysis: It is shown that receding horizon parameters such as input and output horizon lengths have direct effect on the robustness of the system. (3) Code development: A matlab code has been developed which can simulate various MPC formulations. The current effort is to generalize the code to include ability to handle all plant types and all MPC types. (4) Improved predictor: It is shown that MPC design using better predictors that can minimize prediction errors. It is shown analytically and numerically that Smith predictor can provide closed-loop stability under GPC operation for plants with dead times where standard optimal predictor fails. (5) Neural network predictors: When neural network is used as predictor it can be shown that neural network predicts the plant output within some finite error bound under certain conditions. Our preliminary study shows that with proper choice of update laws and network architectures such bound can be obtained. However, much work needs to be done to obtain a similar result in general case.

Kelkar, Atul G.↗
NASA NTRS2002

The Impact of Land Initialization and Assimilation on Climate Predictability and Prediction

Analysis will be presented which explores the impact of land conditions on monthly to seasonal climate simulations in a variety of atmospheric general circulation models (AGCMs). In one set of experiments, the Geophysical Fluid Dynamics Laboratory (GDFL) AGCM is used to explore the nature of soil-moisture predictability and associated climate predictability as an initial value problem. For another set of experiments, the Center for Ocean Land Atmosphere (COLA) and the Goddard Earth Observing System 2 (GEOS-2) AGCMs are used to investigate the impact of realistic snow initialization and assimilation in retrospective climate forecasts for the northern hemisphere spring (March-June).

Schlosser, C. Adam↗
NASA NTRS2011

Predicting Hydrological Drought: Relative Contributions of Soil Moisture and Snow Information to Seasonal Streamflow Prediction Skill

in this study we examine how knowledge of mid-winter snow accumulation and soil moisture conditions contribute to our ability to predict streamflow months in advance. A first "synthetic truth" analysis focuses on a series of numerical experiments with multiple sophisticated land surface models driven with a dataset of observations-based meteorological forcing spanning multiple decades and covering the continental United States. Snowpack information by itself obviously contributes to the skill attained in streamflow prediction, particularly in the mountainous west. The isolated contribution of soil moisture information, however, is found to be large and significant in many areas, particularly in the west but also in region surrounding the Great Lakes. The results are supported by a supplemental, observations-based analysis using (naturalized) March-July streamflow measurements covering much of the western U.S. Additional forecast experiments using start dates that span the year indicate a strong seasonality in the skill contributions; soil moisture information, for example, contributes to kill at much longer leads for forecasts issued in winter than for those issued in summer.

Koster, R.↗
NASA NTRSDate not supplied

Flutter Prediction Report in Support of the High Angle Working Group at the Third Aeroelastic Prediction Workshop

This paper presents a summary of the computational flutter results associated with the AIAA third Aeroelastic Prediction Workshop (AePW-3) High Angle Working Group (HAWG). The computational results are compared against the experimental data collected during the Pitch and Plunge Apparatus (PAPA) Benchmark Supercritical Wing (BSCW) test campaign conducted in the Transonic Dynamics Tunnel (TDT) at NASA Langley Research Center thirty years ago. During that test several flutter points were identified at transonic conditions. One of these points, specifically near Mach 0.8 and 5° angle of attack, became a focal point of the computational challenge with in HAWG. Various fidelity time-domain, Reduced Order Model (ROM) and Linearized Frequency Domain (LFD) methods were used by seven participating teams. While there are encouraging trends in the computational results, the range of the predicted flutter dynamic pressure is still quite large due to the stall flutter mechanism. A description of each participating team’s software and methods is included.

Pawel Chwalowski↗
DOE OSTI2023

Evaluating skill in predicting the Interdecadal Pacific Oscillation in initialized decadal climate prediction hindcasts in E3SMv1 and CESM1 using two different initialization methods and a small set of start years

Abstract It is a daunting challenge to conduct initialized hindcasts with enough ensemble members and associated start years to form a drifted climatology from which to compute the anomalies necessary to quantify the skill of the hindcasts when compared to observations. This limits the ability to experiment with case studies and other applications where only a few initial years are needed. Here we run a set of hindcasts with CESM1 and E3SMv1 using two different initialization methods for a limited set of start years and use the respective uninitialized free-running historical simulations to form the model climatologies. Since the drifts from the observed initial states in the hindcasts toward the uninitialized model state are large and rapid, after a few years the drifted initialized models approach the uninitialized model climatological errors. Therefore, hindcasts from the limited start years can use the uninitialized climatology to represent the drifted model states after about lead year 3, providing a means to compute forecast anomalies in the absence of a large hindcast sample. There is comparable skill for predicting spatial patterns of multi-year Pacific sea surface temperature anomalies in the domain of the Interdecadal Pacific Oscillation using this method compared to the conventional methodology with a large hindcast data set, though there is a model dependence to the drifts in the two initialization methods.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Application of the metabolic modeling pipeline in KBase to categorize reactions, predict essential genes, and predict pathways in an isolate genome

The DOE Systems Biology Knowledgebase (KBase) platform offers a range of powerful tools for the reconstruction, refinement, and analysis of genome-scale metabolic models built from microbial isolate genomes. In this chapter, we describe and demonstrate these tools in action with an analysis of isoprene production in the Bacillus subtilis DSM genome. Two different methods are applied to build initial metabolic models for the DSM genome, then the models are gapfilled in three different growth conditions. Next, flux balance analysis (FBA) and flux variability analysis (FVA) techniques are applied to both study the growth of these models in minimal media and classify reactions within each model based on essentiality and functionality. The models are applied with the FBA method to predict essential genes, which are then compared to an updated list of essential genes obtained for B. subtilis 168, a very similar strain to the DSM isolate. The models are also applied to simulate Biolog growth conditions, and these results are compared with Biolog data collected for B. subtilis 168. Finally, the DSM metabolic models are applied to explore the pathways and genes responsible for producing isoprene in this strain. These studies demonstrate the accuracy and utility of models generated from the KBase pipelines, as well as exploring the tools available for analyzing these models.

DOE knowledgebase↗
DOE OSTI2021

A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates

In nuclear reactors, hydrides can form in fuel cladding due to hydrogen absorption in ZIrcaloy and cause embrittlement. This work presents a microstructure-based finite element model to predict the stress-strain response of Zircaloy containing hydrides. Quantitative microstructural details extracted from scanning electron microscopy (SEM) images were used to generate heterogeneous microstructures including the morphology and spatial distribution of hydrides. The constitutive material model for zircaloy in this study is based on crystal plasticity theory which considers the hexagonal close-packed (HCP) atomic structure of Zircaloy material. The hydrides were modeled as brittle material along with a damage model. Hydride formation inside the zircoloy matrix results in residual stress. This phenomenon is also captured in this model. A parametric study has been conducted to understand the effect of volume fraction, orientation, and lamellae thickness of the hydride phase on the mechanical properties of the overall material.

Kulkarni, Shank S.↗
DOE OSTI2022

Anomalies and Local Structure of Liquid Water from Boiling to the Supercooled Regime as Predicted by the Many-Body MB-pol Model

For the past 50 years, researchers have sought molecular models that can accurately reproduce water’s microscopic structure and thermophysical properties across broad ranges of its complex phase diagram. Herein, molecular dynamics simulations with the many-body MB-pol model are performed to monitor the thermodynamic response functions and local structure of liquid water from the boiling point down to deeply supercooled temperatures at ambient pressure. The isothermal compressibility and isobaric heat capacity show maxima near 223 K, in excellent agreement with recent experiments, and the liquid density exhibits a minimum at ~208 K. A local tetrahedral arrangement, where each water molecule accepts and donates two hydrogen bonds, is found to be the most probable hydrogen-bonding topology at all temperatures. Further, this work suggests that MB-pol may provide predictive capability for studies of liquid water’s physical properties across broad ranges of thermodynamic states, including the so-called water’s “no man’s land” which is difficult to probe experimentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Kinetic Modeling of Secondary Organic Aerosol in a Weather-Chemistry Model: Parameterizations, Processes, and Predictions for GOAmazon

Secondary organic aerosol (SOA) forms and evolves in the atmosphere through many pathways and processes, over diverse spatial and time scales. Hence, there is a need to represent these widely-varying kinetic processes in large-scale atmospheric models to allow for accurate predictions of the abundance, properties, and impacts of SOA. In this work, we integrated a kinetic, process-level model (simpleSOM-MOSAIC) into a weather-chemistry model (WRF-Chem) to simulate the oxidation chemistry and microphysics of atmospheric SOA. simpleSOM-MOSAIC simulates multigenerational gas-phase chemistry, autoxidation reactions, heterogeneous oxidation, oligomerization, and phase-state-influenced gas/particle partitioning of SOA. As a case study, the integrated WRF-Chem-simpleSOM-MOSAIC (WC-SSM) model was used to simulate the photochemical evolution downwind of a large city (Manaus, Brazil) in the Amazon and, in turn, study the anthropogenic and biogenic interactions in an otherwise pristine environment. Consistent with previous work, we found that OA was enhanced by up to a factor of four in the urban plume due to elevated hydroxyl radical (OH) concentrations, relative to the background, and that this OA was dominated by SOA from biogenic precursors (80%). Further, in addition to accurately simulating the OA enhancement in the urban plume, the model reproduced the magnitude of the OA oxygen-to-carbon (O:C) ratio and broadly tracked the evolution of the aerosol size distribution. Our work highlights the importance of including an integrated, kinetic representation of SOA processes in an atmospheric model

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1974

Correlation of full-scale drag predictions with flight measurements on the C-141A aircraft : Phase 2: Wind tunnel tests, analysis, and prediction techniques. Volume 2: Wind tunnel test and basic data

A research program has been conducted to determine the degree of cruise drag correlation on the C-141A aircraft between predictions based on wind tunnel test data, and flight test results. Information is presented on the wind tunnel test program and basic aerodynamic data on the C-141A wind-tunnel model used in the correlation studies.

Macwilkinson, D. G.↗