Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “physical evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

JWST Observations of the Enigmatic Y Dwarf WISE 1828+2650: I. Limits to a Binary Companion

The Y-dwarf WISE 1828+2650 is one of the coldest known Brown Dwarfs with an effective temperature of ~300 K. Located at a distance of just 10 pc, previous model-based estimates suggest WISE 1828+2650 has a mass of ~5-10 M J , making it a valuable laboratory for understanding the formation, evolution and physical characteristics of gas giant planets. However, previous photometry and spectroscopy have presented a puzzle with the near-impossibility of simultaneously fitting both the short (0.9-2.0 μm) and long wavelength (3-5 μm) data. A potential solution to this problem has been the suggestion that WISE 1828+2650 is a binary system whose composite spectrum might provide a better match to the data. Alternatively, new models being developed to fit JWST/NIRSpec and MIRI spectroscopy might provide new insights. This article describes JWST/NIRCam observations of WISE 1828+2650 in 6 filters to address the binarity question and to provide new photometry to be used in model fitting. We also report Adaptive Optics imaging with the Keck 10 m telescope. We find no evidence for multiplicity for a companion beyond 0.5 AU with either JWST or Keck. Companion articles will present low and high resolution spectra of WISE 1828 obtained with both NIRSpec and MIRI.

Infrared spectroscopy↗
NASA NTRS2023

JWST Observations of the Enigmatic Y Dwarf WISE 1828+2650: I. Limits to a Binary Companion

The Y-dwarf WISE 1828+2650 is one of the coldest known brown dwarfs with an effective temperature of∼300K. Located at a distance of just 10 pc, previous model-based estimates suggest WISE1828+2650 has a mass of∼5–10MJ, making it a valuable laboratory for understanding the formation, evolution, and physical characteristics of gas giant planets. However, previous photometry and spectroscopy have presented a puzzle, with the near impossibility of simultaneously fitting both the short-(0.9–2.0μm)and long-wavelength(3–5μm)data. A potential solution to this problem has been the suggestion that WISE 1828+2650 is a binary system whose composite spectrum might provide a better match to the data. Alternatively, new models being developed to fit JWST/NIRSpec, and MIRI spectroscopy might provide new insights. This article describes JWST/NIRCam observations of WISE 1828+2650 in six filters to address the binarity question and to provide new photometry tobe used in model fitting. We also report adaptive optics imaging with the Keck I0 m telescope. We find no evidence for multiplicity for a companion beyond 0.5 au with either JWST or Keck. Companion articles will present low-and high-resolution spectra of WISE 1828 obtained with both NIRSpec and MIRI.

NIRCam↗
NASA NTRS1992

Galaxy formation and physical bias

We have supplemented our code, which computes the evolution of the physical state of a representative piece of the universe to include, not only the dynamics of dark matter (with a standard PM code), and the hydrodynamics of the gaseous component (including detailed collisional and radiative processes), but also galaxy formation on a heuristic but plausible basis. If, within a cell the gas is Jeans' unstable, collapsing, and cooling rapidly, it is transformed to galaxy subunits, which are then followed with a collisionless code. After grouping them into galaxies, we estimate the relative distributions of galaxies and dark matter and the relative velocities of galaxies and dark matter. In a large scale CDM run of 80/h Mpc size with 8 x 10 exp 6 cells and dark matter particles, we find that physical bias b is on the 8/h Mpc scale is about 1.6 and increases towards smaller scales, and that velocity bias is about 0.8 on the same scale. The comparable HDM simulation is highly biased with b = 2.7 on the 8/h Mpc scale. Implications of these results are discussed in the light of the COBE observations which provide an accurate normalization for the initial power spectrum. CDM can be ruled out on the basis of too large a predicted small scale velocity dispersion at greater than 95 percent confidence level.

Cen, Renyue↗
NASA NTRS1994

Crossflow-Vortex Breakdown on Swept Wings: Correlation of Nonlinear Physics

The spatial evolution of cross flow-vortex packets in a laminar boundary layer on a swept wing are computed by the direct numerical simulation of the incompressible Navier- Stokes equations. A wall-normal velocity distribution of steady suction and blowing at the wing surface is used to generate a strip of equally spaced and periodic disturbances along the span. Three simulations are conducted to study the effect of initial amplitude on the disturbance evolution, to determine the role of traveling cross ow modes in transition, and to devise a correlation function to guide theories of transition prediction. In each simulation, the vortex packets first enter a chordwise region of linear independent growth, then, the individual packets coalesce downstream and interact with adjacent packets, and, finally, the vortex packets nonlinearly interact to generate inflectional velocity profiles. As the initial amplitude of the disturbance is increased, the length of the evolution to breakdown decreases. For this pressure gradient, stationary modes dominate the disturbance evolution. A two-coeffcient function was devised to correlate the simulation results. The coefficients, combined with a single simulation result, provide sufficient information to generate the evolution pattern for disturbances of any initial amplitude.

Joslin, R. D.↗
DOE OSTI2025

Results of a Geant4 benchmarking study for bio‐medical applications, performed with the G4‐Med system

Geant4, a Monte Carlo Simulation Toolkit extensively used in bio-medical physics, is in continuous evolution to include newest research findings to improve its accuracy and to respond to the evolving needs of a very diverse user community. In 2014, the G4-Med benchmarking system was born from the effort of the Geant4 Medical Simulation Benchmarking Group, to benchmark and monitor the evolution of Geant4 for medical physics applications. The G4-Med system was first described in our Medical Physics Special Report published in 2021. Results of the tests were reported for Geant4 10.5. Purpose In this work, we describe the evolution of the G4-Med benchmarking system. Methods The G4-Med benchmarking suite currently includes 23 tests, which benchmark Geant4 from the calculation of basic physical quantities to the simulation of more clinically relevant set-ups. New tests concern the benchmarking of Geant4-DNA physics and chemistry components for regression testing purposes, dosimetry for brachytherapy with a 125 I source, dosimetry for external x-ray and electron FLASH radiotherapy, experimental microdosimetry for proton therapy, and in vivo PET for carbon and oxygen beams. Regression testing has been performed between Geant4 10.5 and 11.1. Finally, a simple Geant4 simulation has been developed and used to compare Geant4 EM physics constructors and physics lists in terms of execution times. Results In summary, our EM tests show that the parameters of the multiple scattering in the Geant4 EM constructor G4EmStandardPhysics_option3 in Geant4 11.1, while improving the modeling of the electron backscattering in high atomic number targets, are not adequate for dosimetry for clinical x-ray and electron beams. Therefore, these parameters have been reverted back to those of Geant4 10.5 in Geant4 11.2.1. The x-ray radiotherapy test shows significant differences in the modeling of the bremsstrahlung process, especially between G4EmPenelopePhysics and the other constructors under study (G4EmLivermorePhysics, G4EmStandardPhysics_option3, and G4EmStandardPhysics_option4). These differences will be studied in an in-depth investigation within our Group. Improvement in Geant4 11.1 has been observed for the modeling of the proton and carbon ion Bragg peak with energies of clinical interest, thanks to the adoption of ICRU90 to calculate the low energy proton stopping powers in water and of the Linhard–Sorensen ion model, available in Geant4 since version 11.0. Nuclear fragmentation tests of interest for carbon ion therapy show differences between Geant4 10.5 and 11.1 in terms of fragment yields. In particular, a higher production of boron fragments is observed with Geant4 11.1, leading to a better agreement with reference data for this fragment. Conclusions Based on the overall results of our tests, we recommend to use G4EmStandardPhysics_option4 as EM constructor and QGSP_BIC_HP with G4EmStandardPhysics_option4, for hadrontherapy applications. The Geant4-DNA physics lists report differences in modeling electron interactions in water, however, the tests have a pure regression testing purpose so no recommendation can be formulated.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
NASA NTRS1987

Evolution of magnetic cataclysmic binaries

The physics of magnetic cataclysmic binary evolution is considered, and it is suggested that DQ Her stars will not evolve into AM Her stars (assuming that mu1 remains constant throughout their evolution), in contradiction to previous assertions. Four regimes that depend on mu1 values are identified, and it is suggested that the mu1 values of the known DQ Her stars are significantly less than those of the known AM Her stars (unless all known stars of both groups have M1 greater than 1 solar mass). A new way of producing ultrashort period binaries is proposed in which synchronization of the magnetic degenerate dwarfs injects angular momentum into the binary, driving the system apart and producing a synchronization-induced period gap. The secondaries in these binaries are shown to be hydrogen-rich rather than hydrogen depleted or pure helium.

Lamb, D. Q.↗
NASA NTRS2014

Landform Evolution Modeling of Sedimentary Processes on Icy Worlds: the Cases of Hyperion and Helene

Sedimentary activity (erosion, transportation and deposition) is a major landscape-shaping process on many icy worlds of the outer solar system for which an understanding of this process is central to their geologic characterizations. Several recent studies, lead by the authors, have identified the effects of sedimentary activity on icy satellite landforms and recognized the role of mass wasting and volatile loss and redistribution in the evolution of these features. We apply state of the art, physics based, landform evolution modeling to icy satellite sedimentary landforms in order to fully quantitatively characterize how their morphologies change with time, and what their present appearances imply for the initial abundance and distribution of loose material, volatiles, and refractories in original pristine landforms. We will present results of our landform evolution modeling to the development of the landscapes of the Saturnian moons of Hyperion and Helene. Our current conclusions for Hyperion are that its unique appearance can be explained in part by the loss to space of ballistic ejecta during impact events. In order to create the smooth surfaces and the reticulate, honeycomb pattern of narrow divides between old craters, appreciable subsequent modification of crater morphology must occur through mass-wasting processes accompanied by sublimation, probably facilitated by the loss of CO2 as a component of the relief-supporting matrix of the bedrock. This mass wasting effectively destroys small craters, at least in part accounting for the paucity of sub-kilometer craters on Hyperion. Helene’s unusual morphology consists of broad depressions (modified large craters) and a generally smooth surface patterned with streaks and grooves. The streaks appear to be oriented down-gradient, as are the grooves. This pattern suggests intensive mass-wasting as a dominant process. Our initial modeling of this surface suggests a Bingham-like rheological behavior for the loose down-slope moving material. Interestingly, as a Bingham flow, the models indicate that aperiodic "intermittent" behavior to be present, suggesting that periods of quiet steady landform evolution are punctuated short periods of active surface readjustment.

Saturnian moons↗
NASA NTRS1988

The evolution of the system of globular clusters

The physical processes affecting the evolution of the system of globular clusters are reviewed. Aspects of internal structure evolution discussed include evaporation, core collapse, expansion, tidal shocks, and interaction with other massive components of the Galaxy such as black holes, molecular clouds, and other clusters. The evolution of orbital parameters is examined, including dynamical friction, scattering by massive subcomponents, and interactions with nearby systems. In addition, an overview of the system evolution is presented.

Ostriker, Jeremiah P.↗
NASA NTRS1991

Effects of high pressure nitrogen on the thermal stability of SiC fibers

Polymer-derived SiC fibers were exposed to nitrogen gas pressures of 7 and 50 atm at temperatures up to 1800 C. The fiber weight loss, chemical composition, and tensile strength were then measured at room temperature in order to understand the effects of nitrogen exposure on fiber stability. High pressure nitrogen treatments limited weight loss to 3 percent or less for temperatures up to 1800 C. The bulk Si-C-O chemical composition of the fiber remained relatively constant up to 1800 C with only a slight increase in nitrogen content after treatment at 50 atm; however, fiber strength retention was significantly improved. To further understand the effects of the nitrogen atmosphere on the fiber stability, the results of previous high pressure argon treatments were compared to those of the high pressure nitrogen treatments. High pressure inert gas can temporarily maintain fiber strength by physically inhibiting the evolution of gaseous species which result from internal reactions. In addition to this physical effect, it would appear that high pressure nitrogen further improved fiber temperature capability by chemically reacting with the fiber surface, thereby reducing the rate of gas evolution. Subsequent low pressure argon treatments following the initial nitrogen treatments resulted in stronger fibers than after argon treatment alone, further supporting the chemical reaction mechanism and its beneficial effects on fiber strength.

Jaskowiak, Martha H.↗
NASA NTRS1996

Controlled Quantum Packets

We look at time evolution of a physical system from the point of view of dynamical control theory. Normally we solve motion equation with a given external potential and we obtain time evolution. Standard examples are the trajectories in classical mechanics or the wave functions in Quantum Mechanics. In the control theory, we have the configurational variables of a physical system, we choose a velocity field and with a suited strategy we force the physical system to have a well defined evolution. The evolution of the system is the 'premium' that the controller receives if he has adopted the right strategy. The strategy is given by well suited laboratory devices. The control mechanisms are in many cases non linear; it is necessary, namely, a feedback mechanism to retain in time the selected evolution. Our aim is to introduce a scheme to obtain Quantum wave packets by control theory. The program is to choose the characteristics of a packet, that is, the equation of evolution for its centre and a controlled dispersion, and to give a building scheme from some initial state (for example a solution of stationary Schroedinger equation). It seems natural in this view to use stochastic approach to Quantum Mechanics, that is, Stochastic Mechanics [S.M.]. It is a quantization scheme different from ordinary ones only formally. This approach introduces in quantum theory the whole mathematical apparatus of stochastic control theory. Stochastic Mechanics, in our view, is more intuitive when we want to study all the classical-like problems. We apply our scheme to build two classes of quantum packets both derived generalizing some properties of coherent states.

DeMartino, Salvatore↗
NASA NTRS1987

Space Station evolution

The Space Station that will be launched and made operational in the early 1990s should be viewed as a beginning, a facility that will evolve with the passing of time to better meet the needs and requirements of a diverse set of users. Evolution takes several forms, ranging from simple growth through addition of infrastructure elements to upgrading of system capability through inclusion of advanced technologies. Much of the early considerations of Space Station evolution focused on physical growth. However, a series of recent workshops have revealed that the more likely mode of Space Station evolution will not be through growth but rather through a process known as 'branching'.

Black, David C.↗
DOE OSTI2024

Machine learning opportunities for nucleosynthesis studies

Nuclear astrophysics is an interdisciplinary field focused on exploring the impact of nuclear physics on the evolution and explosions of stars and the cosmic creation of the elements. While researchers in astrophysics and in nuclear physics are separately using machine learning approaches to advance studies in their fields, there is currently little use of machine learning in nuclear astrophysics. We briefly describe the most common types of machine learning algorithms, and then detail their numerous possible uses to advance nuclear astrophysics, with a focus on simulation-based nucleosynthesis studies. We show that machine learning offers novel, complementary, creative approaches to address many important nucleosynthesis puzzles, with the potential to initiate a new frontier in nuclear astrophysics research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1991

Astrophysical dust grains in stars, the interstellar medium, and the solar system

Studies of astrophysical dust grains in circumstellar shells, the interstellar medium, and the solar system may provide information about stellar evolution and about physical conditions in the primitive solar nebula. The following subject areas are covered: (1) the cycling of dust in stellar evolution and the formation of planetary systems; (2) astrophysical dust grains in circumstellar environments; (3) circumstellar grain formation and mass loss; (4) interstellar dust grains; (5) comet dust and the zodiacal cloud; (6) the survival of dust grains during stellar evolution; and (7) establishing connections between stardust and dust in the solar system.

Gehrz, Robert D.↗
NASA NTRS1985

Study of photon emission by electron capture during solar nuclei acceleration. 3: Photon production evaluations

Lower limits of photon fluxes were evaluated from electron capture during acceleration in solar flares, because the arbitrary q sub c asterisk assumed in this work evolves very slow with velocity, probably much more slowly than the physical actual situation: in fact, more emission is expected toward the IR region. Nevertheless the authors claim to show that the factibility of sounding acceleration processes, charge evolution processes and physical parameters of the source itself, by the observational analysis of this kind of emissions. For instance, it would be interesting to search observationally, for the predicted flux and energy drift of F sub e ions interacting with the atomic 0 and F sub e of the source matter, or, even more feasible for the X-ray lines at 4.2 keV and 2.624 + 0.003 KeV from Fe and S ions in ionized Fe at T = 10 to the 7th power K respectively, the 418 + or - 2 eV and 20 + or - 4 eV lines of Fe and S in ionized Fe at 5 x 10 to the 6th power K, which are predicted from Fermi acceleration.

Perez-Peraza, J.↗
NASA NTRSDate not supplied

Quantative Measurements of Trace Elements and Three-Dimensional Atomic Scale Characterisation of Presolar O-rich Oxides and Silicates: An Atom Probe Tomography Approach

Presolar grains are recordsof a single moment in stellar evolution which have survived nebula and parent body processingwithin our Solar System. These grains condensed within a range of stellar envi-ronments including asymptotic giant branch stars, red giant branch stars, nova, supernova (SN) and hydrogen burning electron capture supernova(ECSN)[1,2]. Iso-topic and chemical compositions can be used to unravel details about environmental conditions at the time of their condensation and physical and chemical processes occurring at the time. For example,nucleosynthesis, stellar evolution, physical properties of stellar atmos-pheres, mixing from inner core to outer envelope, galac-tic chemical evolution, interstellar medium and parent body processing.NanoSIMS enables detailed characterisation of iso-topic compositions and rapid in situidentification of O-rich presolar oxides and silicates using their character-istic 17O/16O and 18O/16O isotopic ratios.Spectroscopic techniques e.g., auger spectroscopyand transmission electron microscopy, have provided additional details on major and minor chemical signatures. However, due tospatial resolution limitations,interaction volumes and interferencesfrom surrounding grains for in situtech-niques, attaining quantative characterisation of trace el-ements,hasproved challenging[1,3]. As the most sensitive geochemical tracers of envi-ronmental changes, trace elements are essential to un-ravelling the geochemical record of their parent stellar environments and evolutionary pathways[4].We car-ried out correlated in situisotopic and chemical analyses of 13 presolar grains to better understand stellar evolu-tion. In this work, we achieved this using a custom ap-proach, coordinating NanoSIMS, Scanning Electron Microscopy Energy Dispersive X-Ray Spectroscopy (SEM-EDX)and Atom Probe Tomography(APT).Our objective was to develop an approach which could ena-ble precise targeting of presolar grains for atom probe tomography and successfully execute atomic scale anal-yses of presolar oxides and silicates, to achieve quantative analysis of their trace elements for the first time.We also aimed to test the capability for Atom Probe tomography to measure isotopic compositions and stoichiometries of presolar oxide and silicate grains.

N D Nevill↗
NASA NTRS1999

Investigating Atmospheric Effects on Impact Ejecta Morphology: Possible Tool for Determining Past Climate Conditions on Mars?

The combined use of impact crater morphology and mechanics provides important information on the physical conditions of both planetary atmospheres and planetary and asteroid surfaces present during crater formation, while an understanding of the rate of crater production on the surface of asteroids provides information of their surface and spin rate evolution. The research performed with support from this project improves our understanding of (1) the mechanics of impact cratering in order to gain insights on the evolution of these physical surface conditions on planets with atmospheres and asteroids, and (2) how impact flux across an asteroid surface may vary due to anisotropic distribution of impactors in the solar system. As part of this project, we have undertaken three studies. In the first study, we investigate atmospheric effects on the morphology of ejecta excavated during a cratering event in order to determine the atmospheric and target conditions from observed crater morphologies. In the second study, we use the physical and morphological consequences of oblique impacts on an asteroid to understand how the asteroid Mathilde (recently imaged by the Near Earth Asteroid Rendezvous - NEAR- spacecraft) could have survived the formation of five giant craters. In a third study, we use a Monte Carlo method to calculate the impact flux on an asteroid given a distribution of impactors on elliptical orbits. In the following section, we present the result obtained from all three studies.

Appleby, John F.↗
DOE OSTI2024

The Core-collapse Supernova Sensitivity Machine (Final Technical Report)

Core-collapse supernovae are vital phenomena for understanding the extreme physics of stellar evolution, nuclear interactions, and the origins of elements in the universe. This project developed high-resolution 3D simulations and innovative 1D turbulence models to study the explosion mechanisms, yielding critical insights into the role of turbulence, magnetohydrodynamics, and neutrino physics. The outcomes include enhanced sensitivity analyses connecting nuclear physics inputs to observable supernovae characteristics, tools for the broader research community, and substantial contributions to the training of future scientists.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1987

A processing method and results of meteor shower radar observations

Studies of meteor showers permit the solving of some principal problems of meteor astronomy: to obtain the structure of a stream in cross section and along its orbits; to retrace the evolution of particle orbits of the stream taking into account gravitational and nongravitational forces and to discover the orbital elements of its parent body; to find out the total mass of solid particles ejected from the parent body taking into account physical and chemical evolution of meteor bodies; and to use meteor streams as natural probes for investigation of the average characteristics of the meteor complex in the solar system. A simple and effective method of determining the flux density and mass exponent parameter was worked out. This method and its results are discussed.

Belkovich, O. I.↗