Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase velocity dispersion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Spin waves excitation at micron-sized, anisotropy modified regions in amorphous Fe 80 B 20 stripes: Local properties and inter-regions coupling

We report on the measurement of the local magnetization dynamics occurring, at units of GHz, in large aspect ratio stripes lithographed from reduced damping amorphous Fe 80 B 20 films. The stripes were submitted to local anisotropy modifications by micrometric beam synchrotron X-ray irradiation. Our results include data on the dispersion relationships and group velocities corresponding to spin waves excited at both the non-irradiated and the irradiated regions. Whereas in the former case we observed standing spin waves with transverse-to-the stripe axis wave vector, in the latter one, for which the wave vector of the spin waves was parallel-to-the stripe axis, propagating spin waves were excited. In both regions, we measured the effective propagation distance of the spin waves, which resulted to be independent of the wave vector orientation. In the spin waves excited at the irradiated region, we also measured the decay time and effective damping coefficient, which was in good agreement with previously reported values obtained from FMR measurements in amorphous Fe 80 B 20 continuous films. We show that the interaction of the non-irradiated and irradiated zones results, at the stripe transverse saturation remanence and under an exciting field frequency of 4 GHz, in the introduction of a π phase shift between the standing spin waves excited at both sides of the irradiated region. This result opens the possibility of using the local, transverse to the stripe axis, magnetic anisotropy easy axis induced by the X-ray irradiation as a crucial constituent of a zero-applied field spin wave phase-shifter.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Compensating attenuation effects in full-waveform inversion with dissipation-dispersion decoupling

Seismic attenuation poses challenges to velocity model building from acoustic/elastic full-waveform inversion (FWI). In particular, when constructing the FWI gradient for velocity inversion, recent studies have indicated that the high-attenuation structure could distort the gradient by damping the amplitudes and shifting the kinematic phases, resulting in an imbalanced update and thus unreliable velocity model. These Q effects are particularly significant in the reflection acquisition geometry due to the “double-damping” issue. Here, we develop a Q-compensated FWI algorithm for constructing a Q-free FWI gradient. By using a recently developed viscoacoustic wave propagator, this compensation can be done conveniently by keeping the dispersion term and flipping the dissipation term in the wave equation when we simulate the forward and time-reversed adjoint wavefields. The resultant gradient obtained by interacting these two wavefields has correct kinematics and Q-free amplitudes. This Q-compensated FWI can balance the update between Q- and no- Q-areas, which we determine using synthetic examples. In addition, we illustrate how to take advantage of the dissipation-dispersion decoupling to determine the anomalous Q value in the Q model building workflow via Q-compensated reverse time migration.

Geochemistry & Geophysics↗
NASA NTRS1996

CFD Analysis of the 24-inch JIRAD Hybrid Rocket Motor

A series of multispecies, multiphase computational fluid dynamics (CFD) analyses of the 24-inch diameter joint government industry industrial research and development (JIRAD) hybrid rocket motor is described. The 24-inch JIRAD hybrid motor operates by injection of liquid oxygen (LOX) into a vaporization plenum chamber upstream of ports in the hydroxyl-terminated polybutadiene (HTPB) solid fuel. The injector spray pattern had a strong influence on combustion stability of the JIRAD motor so a CFD study was initiated to define the injector end flow field under different oxidizer spray patterns and operating conditions. By using CFD to gain a clear picture of the flow field and temperature distribution within the JIRAD motor, it is hoped that the fundamental mechanisms of hybrid combustion instability may be identified and then suppressed by simple alterations to the oxidizer injection parameters such as injection angle and velocity. The simulations in this study were carried out using the General Algorithm for Analysis of Combustion SYstems (GALACSY) multiphase combustion codes. GALACSY consists of a comprehensive set of droplet dynamic submodels (atomization, evaporation, etc.) and a computationally efficient hydrocarbon chemistry package built around a robust Navier-Stokes solver optimized for low Mach number flows. Lagrangian tracking of dispersed particles describes a closely coupled spray phase. The CFD cases described in this paper represent various levels of simplification of the problem. They include: (A) gaseous oxygen with combusting fuel vapor blowing off the walls at various oxidizer injection angles and velocities, (B) gaseous oxygen with combusting fuel vapor blowing off the walls, and (C) liquid oxygen with combusting fuel vapor blowing off the walls. The study used an axisymmetric model and the results indicate that the injector design significantly effects the flow field in the injector end of the motor. Markedly different recirculation patterns are observed in the vaporization chamber as the oxygen velocity and/or spray pattern is varied. The ability of these recirculation patterns to stabilize the diffusion flame above the surface of the solid fuel gives a plausible explanation for the experimentally determined combustion stability characteristics of the JIRAD motor, and suggests how combustion stability can be assured by modifications to the injector design.

Liang, Pak-Yan↗
DOE OSTI2023

Crustal and uppermost mantle structure near the Gloria Fault, North Atlantic, from ocean bottom seismometer surface wave observations

SUMMARY In this work, we present both 1-D and 3-D shear wave velocity (Vs) models of the oceanic crust and uppermost mantle below the Deep OCean Test ARray area, located ∼ 70 km north of the central section of the Gloria Fault, in the eastern North-Atlantic Ocean. The velocity models are inferred from the dispersion of surface waves recorded on ocean bottom seismometers. Dispersion measurements are obtained from the analysis of ambient seismic noise at short periods (< 14 s) and teleseismic surface waves at long periods (> 14 s) using the two-station method. The 1-D Vs model is inferred from the joint inversion of Rayleigh wave phase velocities and Love wave group and phase velocities. The 3-D tomographic model is obtained by inversion of 2-D Love wave group velocity maps as a function of depth, further constrained by the average of Love wave phase velocities obtained from ambient noise (4–9 s) and the average Rayleigh and Love wave phase velocities calculated from teleseismic data (14–44 s). The 1-D Vs model shows a sediment layer with a low velocity of 1.05 km s−1, similar to previous studies in the region. Below the sediments, we find an oceanic crust with velocities ranging from 3.3 to 4.5 km s−1. The model reaches an unusually high velocity of 4.9 km s−1 in a 20 km thick layer at depths between 16 and 36 km. We interpret this fast velocity layer as indicative of the presence of harzburgite, a residue of enhanced melting that might have been formed by the proximity between the Mid-Atlantic Ridge and the Azores mantle plume. At greater depths the velocity decreases, forming a low-velocity zone that reaches a minimum at ∼ 70 km depth, which we interpret as the maximum depth for the lithosphere–asthenosphere boundary. The 3-D model shows a structure that is mostly horizontally layered, with Vs isocontours at 3.5–4.5 km s−1 highlighting oscillations of the crustal structure with wavelengths of ∼25–30 km. These oscillations may be due to changes in the rate of mantle upwelling and magma supply rate.

Pinzón, Juan I. (ORCID:0000000338078068)↗
DOE OSTI2022

Modified gravitational wave propagation with higher modes and its degeneracies with lensing

Low-energy alternatives to General Relativity (GR) generically modify the phase of gravitational waves (GWs) during their propagation. As detector sensitivities increase, it becomes key to understand how these modifications affect the GW higher modes and to disentangle possible degeneracies with astrophysical phenomena. We apply a general formalism — the WKB approach — for solving analytically wave propagation in the spatial domain with a modified dispersion relation (MDR). We compare this WKB approach to applying a stationary phase approximation (SPA) in the temporal domain with time delays associated to the group or particle velocity. To this end, we extend the SPA to generic signals with higher modes, keeping careful track of reference phases and arrival times. We find that the WKB approach coincides with the SPA using the group velocity, in agreement with the principles of wave propagation. We then explore the degeneracies between a GW propagation with an MDR and a strongly-lensed GW in GR, since the latter can introduce a frequency-independent phase shift which is not degenerate with source parameters in the presence of higher modes. We find that for a particular MDR there is an exact degeneracy for wave propagation, unlike with the SPA for particle propagation. For the other cases, we search for the values of the MDR parameters that minimize the χ 2 and conclude that strongly-lensed GR GWs could be misinterpreted as GWs in modified gravity. As a result, future MDR constraints with higher mode GWs should include the possibility of frequency-independent phase shifts, allowing for the identification of modified gravity and strong lensing distortions at the same time.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1983

Predictions of the structure of turbulent, particle-laden, round jets

Models of gas and particle motion in turbulent, particle-laden, round jets were evaluated using existing measurements of flow structure. Three models were considered: (1) a locally homogeneous flow model, where velocities and turbulent mixing properties of both phases were assumed to be equal; (2) a deterministic separated flow model, where interphase slip was considered but effects of turbulent dispersion were ignored; and (3) a stochastic separated flow model where effects of interphase slip and turbulent dispersion were considered using random sampling techniques. In all three cases, mean and turbulent properties of the continuous phase were found with a well-calibrated k-epsilon model. The locally homogeneous flow and deterministic separated flow models over- and underestimated particle spread and flow development rates, respectively. The stochastic separated flow model, however, yielded satisfactory predictions of flow structure - except at high particle loadings. Uncertainties in initial conditions for the measurements and possible effects of turbulence modulation by the particles are proposed as the reason for these errors.

Shuen, J.-S.↗
NASA NTRS1993

A spectroscopic study of damped Lyman-alpha systems in the Las Campanas/Palomar survey

The present intermediate-resolution spectra of nine QSOs contain 15 candidate damped Ly-alpha absorption features which are part of a sample of candidate damped Ly-alpha absorption lines. Ten of the 15 candidates are confirmed to have these features; eight of the ten have neutral hydrogen column density greater than 2 x 10 exp 20/sq cm. A simple curve-of-growth analysis is conducted for seven of the ten confirmed Ly-alpha systems, in order to characterize the kinematics of the absorbing gas; the deduced velocity dispersion, which is too large to be compatible with the simple velocity structure indicated by the 21-cm absorption data, is interpreted as grounds for a two-phase model encompassing a quiescent H I gas and a turbulent gas that dominates the equivalent widths of associated metal lines.

Lu, Limin↗
DOE OSTI2025

Discovery of Powerful Multivelocity Ultrafast Outflows in the Starburst Merger Galaxy IRAS 05189–2524 with XRISM

We observed the X-ray-bright ultraluminous infrared galaxy IRAS 05189−2524 with XRISM during its performance verification phase. The unprecedented energy resolution of the onboard X-ray microcalorimeter revealed complex spectral features at ∼7–9 keV, which can be interpreted as blueshifted Fe XXV/XXVI absorption lines with various velocity dispersions, originating from ultrafast outflow (UFO) components with multiple bulk velocities of ∼0.076c, ∼0.101c, and ∼0.143c. In addition, a broad Fe–K emission line was detected around ∼7 keV, forming a P Cygni profile together with the absorption lines. The onboard X-ray CCD camera revealed a 0.4–12 keV broadband spectrum characterized by a neutrally absorbed power-law continuum with a photon index of ∼2.3 and intrinsic flare-like variability on timescales of ∼10 ks, both of which are likely associated with near-Eddington accretion. We also found potential variability of the UFO parameters on a timescale of ∼140 ks. Using these properties, we propose new constraints on the outflow structure and suggest the presence of multiple outflowing regions on scales of about tens to 100 Schwarzschild radii, located within roughly 2000 Schwarzschild radii. Since both the estimated momentum and energy outflow rates of the UFOs exceed those of galactic molecular outflows, our results indicate that powerful, multivelocity UFOs are already well developed during a short-lived evolutionary phase following a major galaxy merger, characterized by intense starburst activity and likely preceding the quasar phase. This system is expected to evolve into a quasar, sustaining strong UFO activity and suppressing star formation in the host galaxy.

Astronomy and AstroPhysics↗
DOE OSTI2023

Suppression of one-dimensional weak localization by band asymmetry

Herein we investigate disorder-induced localization in metals that break time-reversal and inversion symmetries through their energy dispersion, ε k ≠ε– k , but lack Berry phases. In the perturbative regime of disorder, we show that weak localization is suppressed due to a mismatch of the Fermi velocities of left and right movers. To substantiate this analytical result, we perform quench numerics on chains shorter than the Anderson localization length ξ—the latter computed and verified to be finite using the recursive Green's function method—and find a sharp rise in the saturation value of the participation ratio due to band asymmetry, indicating a tendency to delocalize. Interestingly, for weak disorder strength η, we see a better fit to the scaling behavior ξ∝1/η 2 for asymmetric bands than conventional symmetric ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1990

Observations of planetary mixed Rossby-gravity waves in the upper stratosphere

Observational evidence is presented for planetary scale (zonal wave number 1-2) mixed Rossby-gravity (MRG) waves in the equatorial upper stratosphere (35-50 km). These waves are detected in LIMS measurements as coherently propagating temperature maxima of amplitude 0.1-0.3 K, which are antisymmetric (out of phase) about the equator, centered near 10-15 deg north and south latitude. These features have vertical wavelengths of order 10-15 km, periods near 2-3 days, and zonal phase velocities close to 200 m/s. Both eastward and westward propagating waves are found, and the observed vertical wavelengths and meridional structures are in good agreement with the MRG dispersion relation. Theoretical estimates of the zonal accelerations attributable to these waves suggest they do not contribute substantially to the zonal momentum balance in the middle atmosphere.

Randel, William J.↗
NASA NTRS1981

IUE ultraviolet observations of W UM a Stars

International Ultraviolet Explorer observations of four W UMa eclipsing binary systems (44 Boo, VW Cep, W UMa, and epsilon) are discussed. The stars generally show large surface fluxes of high temperature lines (C II, C IV, N V, Si IV) which may result from the high rotational velocities forced by synchronous rotation. High dispersion spectra of the 44 Boo system in the Mg II line enable the individual stellar components to be identified. The line widths and phase variations are consistent with the optically determined spectroscopic orbit. Circumstellar absorption of Mg II may be presented at selected phases.

Dupree, A. K.↗
NASA NTRS1993

Ferruleless coupled-cavity traveling-wave tube cold-test characteristics simulated with micro-SOS

The three-dimensional, electromagnetic circuit analysis code, Micro-SOS, can be used to reduce expensive and time consuming experimental 'cold-testing' of traveling-wave tube (TWT) circuits. The frequency-phase dispersion and beam interaction impedance characteristics of a ferruleless coupled-cavity traveling-wave tube slow-wave circuit were simulated using the code. Computer results agree closely with experimental data. Variations in the cavity geometry dimensions of period length and gap-to-period ratio were modeled. These variations can be used in velocity taper designs to reduce the radiofrequency (RF) phase velocity in synchronism with the decelerating electron beam. Such circuit designs can result in enhanced TWT power and efficiency.

Schroeder, Dana L.↗
NASA NTRS2012

Optimal Fragmentation and Dispersion of Hazardous Near-Earth Objects

The complex problem of protecting the Earth from the possibility of a catastrophic impact by a hazardous near-Earth object (NEO) has been recently reassessed in [1]. In a letter on NEOs from the White House Office of Science and Technology Policy (OSTP) to the U.S. Senate and Congress in 2010, the White House OSTP strongly recommended that NASA take the lead in conducting research activities for NEO detection, characterization, and deflection technologies. Furthermore, President Obama's new National Space Policy specifically directs NASA to "pursue capabilities, in cooperation with other departments, agencies, and commercial partners, to detect, track, catalog, and characterize NEOs to reduce the risk of harm to humans from an unexpected impact on our planet." The Planetary Defense Task Force of the NASA Advisory Council also recommended that the NASA Office of the Chief Technologist (OCT) begin efforts to investigate asteroid deflection techniques. With national interest growing in the United States, the NEO threat detection and mitigation problem was recently identified as one of NASA's Space Technology Grand Challenges. An innovative solution to NASA's NEO Impact Threat Mitigation Grand Challenge problem was developed through a NIAC Phase I study (9/16/11 - 9/15/12), and it will be further investigated for a NIAC Phase II study (9/10/12 - 9/9/14). Various NEO deflection technologies, including nuclear explosions, kinetic impactors, and slow-pull gravity tractors, have been proposed and examined during the past two decades. Still, there is no consensus on how to reliably deflect or disrupt hazardous NEOs in a timely manner. It is expected that the most probable mission scenarios will have a mission lead time much shorter than 10 years, so the use of nuclear explosives becomes the most feasible method for planetary defense. Direct intercept missions with a short warning time will result in arrival closing velocities of 10-30 kilometers per second with respect to the target asteroid. Given such a large arrival delta V requirement, a rendezvous mission to the target asteroid is infeasible with existing launch vehicles. Furthermore, state-of-the-art penetrating subsurface nuclear explosion technology limits the penetrator's impact velocity to less than approximately 300 meters per second because higher impact velocities prematurely destroy the nuclear fuzing mechanisms. Therefore, significant advances in hypervelocity nuclear interceptor/ penetrator technology must be achieved to enable a last-minute nuclear disruption mission with intercept velocities as high as 30 kilometers per second. Consequently, a HAIV (Hypervelocity Asteroid Intercept Vehicle) mission architecture (Figure 1.1), which blends a hypervelocity kinetic impactor with a subsurface nuclear explosion for optimal fragmentation and dispersion of hazardous NEOs, has been developed through a Phase I study, and it will be further developed and validated through a Phase II study.

Asteroid↗
DOE OSTI2022

CTF Improved Drag Model and Flow Regime Transition Criteria

The demand for accurate prediction of two-phase flow behavior in a boiling water reactor (BWR) requires a comprehensive understanding of flow regime, void fraction, heat transfer, and pressure drop. The CTF subchannel code, which is used for the Thermal/Hydraulic (T/H) solution in the Consortium for Advanced Simulation of Light Water Reactors (CASL)-developed Virtual Environment for Reactor Application (VERA) core simulator, is being further developed for BWR applications. In support of this goal, the present work highlights some of the two-phase closure model developments towards improving the CTF void fraction prediction, especially for subcooled boiling. The drift-flux approach has been well-developed for upward dispersed two-phase flows and proven to be accurate in predicting void fraction in bubbly and slug flow regimes. In this work, these kinematic constitutive relations for the drift-flux velocity have been implemented into CTF to describe the interfacial drag of bubbly flow as an alternative to the existing model for better void fraction prediction. The success of these constitutive relations also relies on a good flow regime map that accounts for flow conditions and channel geometry. A more reliable flow regime transition criteria that account for the flow condition has also been implemented in this study for modeling the flow regime transition criteria. The newly implemented models are shown to give improved void fraction predictions in comparison to experimental data.

Hizoum, Belgacem↗
NASA NTRS1983

Prediction of structures and magnetic orientations in solid alpha and beta-O2

A quasi-harmonic-lattice-dynamics method coupled with a pattern-recognition optimization scheme is used to determine the minimum energy structures and magnetic orientations of solid oxygen. It is shown that the magnetic interaction is responsible for the stability of alpha-O2 with respect to beta-O2 at zero temperature and pressure. The calculated alpha-O2 lattice parameters, magnetic orientations, and sublimation energy are in good agreement with experiment. Phonon dispersion curves are calculated at vector k not equal to zero and the acoustic sound velocities are determined. The rms translational and orientational fluctuations from equilibrium are also calculated. The beta-O2 phase is described by constraining the magnetic moments so that the magnetic Hamiltonian preserves the hexagonal symmetry of the crystal. The calculated lattice parameters are in good agreement with the experiments, and a three-sublattice, quasi-helical magnetic orientation is predicted from structural and energetic considerations.

Etters, R. D.↗
NASA NTRS1993

Advanced Multi-Phase Flow CFD Model Development for Solid Rocket Motor Flowfield Analysis

It is known that the simulations of solid rocket motor internal flow field with AL-based propellants require complex multi-phase turbulent flow model. The objective of this study is to develop an advanced particulate multi-phase flow model which includes the effects of particle dynamics, chemical reaction and hot gas flow turbulence. The inclusion of particle agglomeration, particle/gas reaction and mass transfer, particle collision, coalescence and breakup mechanisms in modeling the particle dynamics will allow the proposed model to realistically simulate the flowfield inside a solid rocket motor. The Finite Difference Navier-Stokes numerical code FDNS is used to simulate the steady-state multi-phase particulate flow field for a 3-zone 2-D axisymmetric ASRM model and a 6-zone 3-D ASRM model at launch conditions. The 2-D model includes aft-end cavity and submerged nozzle. The 3-D model represents the whole ASRM geometry, including additional grain port area in the gas cavity and two inhibitors. FDNS is a pressure based finite difference Navier-Stokes flow solver with time-accurate adaptive second-order upwind schemes, standard and extended k-epsilon models with compressibility corrections, multi zone body-fitted formulations, and turbulence particle interaction model. Eulerian/Lagrangian multi-phase solution method is applied for multi-zone mesh. To simulate the chemical reaction, penalty function corrected efficient finite-rate chemistry integration method is used in FDNS. For the AL particle combustion rate, the Hermsen correlation is employed. To simulate the turbulent dispersion of particles, the Gaussian probability distribution with standard deviation equal to (2k/3)(exp 1/2) is used for the random turbulent velocity components. The computational results reveal that the flow field near the juncture of aft-end cavity and the submerged nozzle is very complex. The effects of the turbulent particles affect the flow field significantly and provide better prediction of the ASRM performance. The multi-phase flow analysis using the FDNS code in the present research can be used as a design tool for solid rocket motor applications.

Liaw, Paul↗
NASA NTRS1981

Interpretation of phase velocity measurements of wind-generated surface waves

Differences in experimental results for surface gravity wave phase speeds obtained by cross spectra and slope-height spectra are compared. It is shown that, for a simple two-dimensional model containing both dispersive and non-dispersive waves, the observed differences can be explained readily. The slope-height technique measures a weighted average of the wavenumber squared; for frequencies sufficiently large compared with the dominant frequency, the computed phase-speed variation with frequency is representative of the wave having the larger wavenumber - the dispersive wave. For the cross-spectral method, it is shown that the small-probe-separation assumption usually employed is not valid for frequencies much larger than the dominant frequency, except at the singular point where both waves have exactly equal spectral densities and the phase function represents an average of the two modes. For all other cases, the phase function approaches that of the wave having the larger spectral density, and essentially ignores the presence of the other wave, even if both modes are relatively close in their contributions to the total spectral density.

Dudis, J. J.↗