SEARCH · Engineering Papers

Results for “phase equilibria”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Measurements

To interpret the effects of aerosols and gases on the atmosphere, information on the vertical and horizontal distribution of aerosol particles, their size distributions and concentration of precursor gases is required. Measurements of aerosols and gases at frequent intervals and over vast areas of atmosphere generally involve remote sensing techniques. These techniques depend on the optical properties of the species studied. Optical properties can vary greatly with aerosol size and refractive index. Remote sensing instruments look at light scattering, extinction, depolarization, and reflection. The chemical composition, phase equilibria, surface properties, and photochemical behavior of stratospheric aerosols are not clearly understood or adequately measured by current technologies. Areas are listed which need technology development.

Source record↗

NASA NTRS1990

The petrogenesis of primary mid-ocean ridge basalts

The nature of primary mid-ocean ridge basalts (MORB) is reviewed from the primary-magma composition point of view. The concept of primary MORB magma used in the study stipulates that melting of the mantle produces a discrete identifiable magma that separates from the mantle and ascends toward the surface. Constraints from abyssal peridotites are considered along with constraints from high-pressure phase equilibria studies with emphasis on partial melting of mantle peridotites, basalt-peridotite sandwich techniques, high-pressure experiments on MORB-type compositions, and constraints on the pressure of origin from mineral compositions. Compositional variations in primitive MORB glasses are discussed, and possible models for the origin of these glasses are presented.

Elthon, Don↗

NASA NTRS1991

Metastable phase formation in undercooled liquid lead alloys

During non-equilibrium processes metastable phases are formed instead of stable phases due to the operation of various kinetic or structural constraints. By removing the most effective nucleation sites for the stable phase using emulsified droplet samples, stable phase formation can be prohibited in a broad range of undercooling and the phase space available in the metastable regime can be mapped out. With this method the thermodynamic properties of the undercooled liquid and the metastable phase boundaries corresponding to reversible metastable (solid + liquid) phase equilibria are examined from experimental data. The analysis reveals important implications for the nucleation kinetics and the choice of the kinetically most favored solidification path.

Fecht, Hans J.↗

NASA NTRS1991

Optical and thermodynamic property measurements of liquid metals and alloys

Optical properties and spectral emissivities of liquid silicon, titanium, niobium, and zirconium were investigated by HeNe laser polarimetry at 632.8 nm. The metals were of a high purity and, except for zirconium, clean. The more demanding environmental requirements for eliminating oxide or nitride phases from zirconium were not met. Containerless conditions were achieved by electromagnetic levitation and heating. CO2 laser beam heating was also used to extend the temperature range for stable levitation and to heat solid silicon to form the metallic liquid phase. Corrections to previously reported calorimetric measurements of the heat capacity of liquid niobium were derived from the measured temperature dependence of its spectral emissivity. Property measurements were obtained for supercooled liquid silicon and supercooling of liquid zirconium was accomplished. The purification of liquid metals and the extension of this work on liquids to the measurement of thermodynamic properties and phase equilibria are discussed.

Weber, J. K. R.↗

NASA NTRS1991

The magnesium sulfate-water system at pressures to 4 kilobars

Hydrated magnesium sulfate constitutes up to 1/6 of the mass of carbonaceous chondrites, and probably is important in many icy asteroids and satellites. It occurs naturally in meteorites mostly as epsomite. MgSO4, considered anhydrously, comprises nearly 3/4 of the highly soluble fraction of C1 chondrites. Thus, MgSO4 is probably an important solute in cryovolcanic brines erupted on certain icy objects in the outer solar system. While the physiochemical properties of the water-magnesium sulfate system are well known at low pressures, planetological applications of these data are hindered by a dearth of useful published data at elevated pressures. Accordingly, solid-liquid phase equilibria was recently explored in this chemical system at pressures extending to about 4 kilobars. The water magnesium sulfate system in the region of the eutectic exhibits qualitatively constant behavior between pressures of 1 atm and 2 kbar. The eutectic melting curve closely follows that for water ice, with a freezing point depression of about 4 K at 1 atm decreasing to around 3.3 K at 2 kbars. The eutectic shifts from 17 pct. MgSO4 at 1 atm to about 15.3 pct at 2 kbars. Above 2 kbars, the eutectic melting curve again tends to follow ice.

Hogenboom, D. L.↗

NASA NTRS1992

Workshop on the Physics and Chemistry of Magma Oceans from 1 Bar to 4 Mbar

Evidence for the existence of magma oceans is discussed in great detail, and among the many new items introduced were high-pressure phase equilibrium experiments, calculations of depth of impact-produced melting, models incorporating crystal growth rates with degree of crystallinity and convection, and models of hard turbulent convection. It was agreed that before we can point to some present-day observable parameters and confidently establish the existence of magma oceans, we must learn much more about their phase equilibria and solidification dynamics.

Agee, Carl B.↗

NASA NTRS1992

High-pressure melting of carbonaceous chondrite

Phase equilibria experiments investigating the melting and differentiation of the primordial Earth require a realistic 'initial' chemical composition. Carbonaceous chondrites are good analogues for the initial bulk chemical composition of an accreting early Earth because they contain approximately solar abundances of the non-volatile elements and are the most primitive objects yet sampled in the solar system.

Agee, Carl B.↗

NASA NTRS1992

A liquidus phase diagram for the groundmass of EETA 79001A (Eg), a primitive Shergottite composition

Shergottites are members of the SNC meteorite suite, which may be samples of Mars. If so, the shergottite in our collection that most likely represents primitive liquid from the Martian mantle is EETA 79001. EETA 79001 has the Nd isotopic signature of a long-term depleted mantle, a relatively high Mg number, and a slightly olivine-normative composition. The authors have performed experiments on the composition of EETA 79001 for traces of Eg. Other topics discussed include: comparison of calculated phase equilibria; nature of the olivine-pyroxene boundary; and interstitial liquids.

Jones, J. H.↗

NASA NTRS1994

Partial melting of the St. Severin (LL) and Lost City (H) ordinary chondrites: One step backwards and two steps forward

This study looks at partial melting in H and LL chondrites at nearly one atmosphere of total pressure as part of a continuing study of the origins of basaltic achondrites. Previously, melting experiments on anhydrous CM and CV chondrites showed that, near its solidus, the CM chondrite produced melts having major element chemistries similar to the Sioux County eucrite; but, the pyroxenes in the residuum were too iron-rich to form diogenites. Our preliminary results from melting experiments on ordinary (H, LL) chondrites suggested that, although the melts did not look like any known eucrites, pyroxenes from these charges bracketed the compositional range of pyroxenes found in diogenites. We had used the Fe/Mg exchange coefficients calculated for olivine, pyroxene, and melt in these charges to evaluate the approach to equilibrium, which appeared to be excellent. Unfortunately, mass balance calculations later indicated to us that, unlike our CM and CV charges, the LL and H experimental charges had lost significant amounts of iron to their (Pt or PtRh) supports. Apparently, pyroxene stability in chondritic systems is quite sensitive to the amount of FeO, and it was this unrecognized change in the bulk iron content which had stabilized the high temperature, highly magnesian pyroxenes. Accordingly, this work reinvestigates the phase equilibria of ordinary chondrites, eliminating iron and nickel loss, and reports significant differences. It also looks closely at how the iron and sodium in the bulk charge affect the stability of pyroxene, and it comments on how these new results apply to the problems of diogenite and eucrite petrogenesis.

Jurewicz, A. J. G.↗

NASA NTRS1994

Subduction of hydrated basalt of the oceanic crust: Implications for recycling of water into the upper mantle and continental growth

Subduction zones are presently the dominant sites on Earth for recycling and mass transfer between the crust and mantle; they feed hydrated basaltic oceanic crust into the upper mantle, where dehydration reactions release aqueous fluids and/or hydrous melts. The loci for fluid and/or melt generation will be determined by the intersection of dehydration reaction boundaries of primary hydrous minerals within the subducted lithosphere with slab geotherms. For metabasalt of the oceanic crust, amphibole is the dominant hydrous mineral. The dehydration melting solidus, vapor-absent melting phase relationships; and amphibole-out phase boundary for a number of natural metabasalts have been determined experimentally, and the pressure-temperature conditions of each of these appear to be dependent on bulk composition. Whether or not the dehydration of amphibole is a fluid-generating or partial melting reaction depends on a number of factors specific to a given subduction zone, such as age and thickness of the subducting oceanic lithosphere, the rate of convergence, and the maturity of the subduction zone. In general, subduction of young, hot oceanic lithosphere will result in partial melting of metabasalt of the oceanic crust within the garnet stability field; these melts are characteristically high-Al2O3 trondhjemites, tonalites and dacites. The presence of residual garnet during partial melting imparts a distinctive trace element signature (e.g., high La/Yb, high Sr/Y and Cr/Y combined with low Cr and Y contents relative to demonstrably mantle-derived arc magmas). Water in eclogitized, subducted basalt of the oceanic crust is therefore strongly partitioned into melts generated below about 3.5 GPa in 'hot' subduction zones. Although phase equilibria experiments relevant to 'cold' subduction of hydrated natural basalts are underway in a number of high-pressure laboratories, little is known with respect to the stability of more exotic hydrous minerals (e.g., ellenbergite) and the potential for oceanic crust (including metasediments) to transport water deeper into the mantle.

Rapp, R. P.↗

NASA NTRS1994

Aubrite basalt vitrophyres: High sulfur silicate melts and a snapshot of aubrite formation

Two aubrite basalt vitrophyre clasts have been found within AMNH thin sections from the Parsa EH3 chondrite and the Khor Temiki aubrite. Polished sections of the Parsa Aubrite Inclusion (PAI) and the Khor Temiki Inclusion (KTI) were studied by optical, electron probe microanalysis (EPMA), and scanning electron microscopy (SEM) techniques with broad-beam and low absorbed EPMA currents used to minimize glass volatile loss. Some data have previously been reported for PAI and KTI may possibly correlate to a previously reported inclusion in Khor Tiimiki. In polished sections, PAI and KTI are approximately equal 4 mm in diameter and contain a large volume of glass. The clasts have similar textural characteristics and are akin to lunar vitrophyre textures. The glasses have high alkali rhyodacitic compositions Al-though PAI is peraluminous, KTI is significantly peralkaline. Additionally, the glasses have elevated sulfur concentrations that are extremely high by geochemical standards. SEM examination for beam overlap of microscopic CaS, FeS, and (Mg, Mn, Fe) S inclusions showed no such contamination. Furthermore, homogeneity of glass S content and low FeO contents help rule out contamination. Materials research data show that under reducing conditions alumino-silicate melts can dissolve up to several weight percent sulfur in the absence of Fe. The high S and alkali contents, the lack of associated high shock features, and the rationalized phase equilibria suggest that PAI and KTI are igneous melting products of an E-chondrite-like source material. Although large-scale impact melting cannot totally be ruled out, the above observations eliminate the possibility of in-situ shock melting.

Fogel, R. A.↗

NASA NTRS2002

Kinetics of Melting and Dissolution in Lunar Materials

An understanding of the petrogenesis of lunar magmas, particularly mare basalts and the parent magmas to the Mg-rich suite, remains an unfulfilled goal. The fact is not surprising given the complexity of the problem. On the Moon, the source region for lunar magmas is not primitive mantle but rather a series of cumulate rocks that vary widely in both minerology and major and minor element contents. The stratigraphy of the cumulate mantle is not likely to be very regular given that the culumate pile is formed initially in an unstable configuration and subsequent thermal and compositional heterogeneities on a number of length scales. These lithologic heterogeneities, the large range of pressures and temperatures over which melts are generated on the Moon, and the close juxtaposition of cumulate rock with widely varying solidii introduce significant complications to the nature of the melting relations that control melt generation. These factors, coupled with the likelihood that polybaric fractional melting of varying efficiencies ultimately control the composition of planetary progress, are ample reasons why the lunar magmas remain the enigma they are. To make progress, phase equilibria studies must be coupled with a detailed understanding of the time scales and the dynamics of crystal and melt reequilibration processes.

Hess, Paul C.↗

NASA NTRS2004

The Edge of Wetness: The Case for Dry Magmatism on Mars

The issue of whether martian magmas are wet or dry is an important one. The answer to this basic question has profound consequences for how we think about Mars as a planet. Recently, several lines of evidence have been presented that collectively suggest that shergottite parent magmas were once wet. These include: (i) phase equilibria studies that indicate that the Shergotty parent magma required ~2 wt.% water in order to be co-saturated with both pigeonite and augite, (ii) reverse zoning of light lithophile elements (Li and B) in shergottite pyroxenes, suggesting the exsolution and removal of an aqueous fluid, and (iii) measurement of D/H ratios in SNC minerals that are much lower than atmospheric, suggesting that there may be juvenile (primordial) mantle water. Below I will review the evidence for the diametrically opposite case, that shergottite magmas were effectively dry (<< 1 wt.% H 2 O).

J.H. Jones↗

NASA NTRS2004

Evidence for a Wet, Reduced Martian Interior

Knowledge of the oxygen fugacity and hydrogen content of the source regions of martian meteorites is of paramount importance in constraining phase equilibria, crystallization sequences, and geodynamic processes of the martian interior, as well as models of the planet's evolution. To date, these interpretations have been hindered by the paucity in SNC meteorites of Fe-Ti oxides used in conventional oxybarometry, and by the presence of secondary alteration products that make it impossible to quantify primary hydrogen abundances in SNC minerals and melts based on whole rock samples. We present here the first transmission FTIR spectra of individual mineral grains from SNC meteorites, and interpret those results along with Mossbauer data on mineral separates from the same meteorites. Our goal is to quantify the amount of water and the oxygen fugacity present in the source regions for the rocks comprising the meteorites.

Dyar, M. D.↗

NASA NTRS2006

Compositional Pathways and Capillary Effects during Early-stage Isothermal Precipitation in a Nondilute Ni-Al-Cr Alloy

For a Ni-5.2 Al-14.2 Cr at.% alloy with moderate solute supersaturations, the compositional pathways, as measured with atom-probe tomography, during early to later stage y'(LI2)-precipitation (R = 0.45-10 nm), aged at 873 K, are discussed in light of a multi-component coarsening model. Employing nondilute thermodynamics, detailed model analyses during quasistationary coarsening of the experimental data establish that the y/y' interfacial free-energy is 22- 23+/-7 mJ/sq m. Additionally, solute diffusivities are significantly slower than model estimates. Strong quantitative evidence indicates that an observed y'-supersaturation of Al results from the Gibbs-Thomson effect, providing the first experimental verification of this phenomenon. The Gibbs-Thomson relationship, for a ternary system, as well as differences in measured phase equilibria with CALPHAD assessments, are considered in great detail.

Sudbrack, Chantal K.↗

NASA NTRS2012

Containerless Processing Studies in the MSFC Electrostatic Levitator

Levitation or containerless processing represents an important tool in materials research. Levitated specimens are free from contact with a container, which permits studies of deeply undercooled melts, and high-temperature, highly reactive materials. Containerless processing provides data for studies of thermophysical properties, phase equilibria, metastable state formation, microstructure formation, undercooling, and nucleation. Levitation techniques include: acoustic, aero-acoustic, electromagnetic, and electrostatic. In microgravity, levitation can be achieved with greatly reduced positioning forces. Microgravity also reduces the effects of buoyancy and sedimentation in melts. The European Space Agency (ESA) and the German Aerospace Center (DLR) jointly developed an electromagnetic levitator facility (MSL-EML) for containerless materials processing in space. The MSL-EML will be accommodated in the European Columbus Facility on the International Space Station (ISS). The electrostatic levitator (ESL) facility at the Marshall Space Flight Center provides support for the development of containerless processing studies for the ISS. The capabilities of the facility and recent results will be discussed.

Rogers, J. R.↗

NASA NTRS2014

Phase Equilibrium Experiments on Potential Lunar Core Compositions: Extension of Current Knowledge to Multi-Component (Fe-Ni-Si-S-C) Systems

Numerous geophysical and geochemical studies have suggested the existence of a small metallic lunar core, but the composition of that core is not known. Knowledge of the composition can have a large impact on the thermal evolution of the core, its possible early dynamo creation, and its overall size and fraction of solid and liquid. Thermal models predict that the current temperature at the core-mantle boundary of the Moon is near 1650 K. Re-evaluation of Apollo seismic data has highlighted the need for new data in a broader range of bulk core compositions in the PT range of the lunar core. Geochemical measurements have suggested a more volatile-rich Moon than previously thought. And GRAIL mission data may allow much better constraints on the physical nature of the lunar core. All of these factors have led us to determine new phase equilibria experimental studies in the Fe-Ni-S-C-Si system in the relevant PT range of the lunar core that will help constrain the composition of Moon's core.

Righter, K.↗

NASA NTRS2015

Sulfur and Metal Fertilization of the Lower Continental Crust

Mantle-derived melts and metasomatic fluids are considered to be important in the transport and distribution of trace elements in the subcontinental lithospheric mantle. However, the mechanisms that facilitate sulfur and metal transfer from the upper mantle into the lower continental crust are poorly constrained. This study addresses this knowledge gap by examining a series of sulfide- and hydrous mineral-rich alkaline mafic-ultramafic pipes that intruded the lower continental crust of the Ivrea-Verbano Zone in the Italian Western Alps. The pipes are relatively small (<300 m diameter) and primarily composed of a matrix of subhedral to anhedral amphibole (pargasite), phlogopite and orthopyroxene that enclose sub-centimeter-sized grains of olivine. The 1 to 5 m wide rim portions of the pipes locally contain significant blebby and disseminated Fe-Ni-Cu-PGE sulfide mineralization.Stratigraphic relationships, mineral chemistry, geochemical modeling and phase equilibria suggest that the pipes represent open-ended conduits within a large magmatic plumbing system. The earliest formed pipe rocks were olivine-rich cumulates that reacted with hydrous melts to produce orthopyroxene, amphibole and phlogopite.Sulfides precipitated as immiscible liquid droplets that were retained within a matrix of silicate crystals and scavenged metals from the percolating hydrous melt. New high-precision chemical abrasion TIMS-UPb dating of zircons from one of the pipes indicates that these pipes were emplaced at 249.1+/-0.2 Ma, following partial melting of lithospheric mantle pods that were metasomatized during the Eo-Variscan oceanic to continental subduction (approx. 420-310 Ma). The thermal energy required to generate partial melting of the metasomatized mantle was most likely derived from crustal extension, lithospheric decompression and subsequent asthenospheric rise during the orogenic collapse of the Variscan belt (<300 Ma). Unlike previous models, outcomes from this study suggest a significant temporal gap between the occurrence of mantle metasomatism, subsequent partial melting and emplacement of the pipes.We argue that this multi-stage process is a very effective mechanism to fertilize the commonly dry and refractory lower continental crust in metals and volatiles. During the four-dimensional evolution of the thermo-tectonic architecture of any given terrain, metals and volatiles stored in the lower continental crust may become available as sources for subsequent ore-forming processes, thus enhancing the prospectivity of continental block margins for a wide range of mineral systems.

Marek Locmelis↗