Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Effect of deposition rate on microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser engineered net shaping

Laser engineered net shaping (LENS) is an additive manufacturing technique for fabricating and repairing metallic components. However, the relationships between its process parameters and the resulting mechanical properties of alloys such as 17-4 precipitation-hardening (PH) stainless steel require further investigation to enable reliable application. This study examines the specific effect of LENS deposition rate on the microstructure and mechanical properties of 17-4 PH stainless steel. Specimens were fabricated at two different deposition rates (8.47 and 9.31 mm s−1), subjected to subsequent solution and H900 aging treatment, and then evaluated via tensile testing, hardness measurements, and microscopy. A higher deposition rate results in a finer grain structure but increased porosity, leading to greater ultimate tensile strength (∼1294 MPa) yet lower ductility (strain at failure ∼5.8%) compared to the slower deposition rate (∼1266 MPa, ∼9.0% strain). Hardness follows the same trend as tensile strength. Tensile fracture surfaces for both conditions exhibited a mixed mode of ductile dimples and brittle quasi-cleavage regions, with chromium/silicon oxide particles identified within dimples. Complementary finite element modeling indicates that small void fractions primarily reduce ductility by enhancing localized plasticity, with only a marginal decrease in tensile strength. These integrated experimental and numerical results elucidate the mechanical properties linked to deposition rate, providing insight into tailoring LENS processes to achieve desired properties of 17-4 PH stainless steel.

17-4 PH stainlesssteel↗
DOE OSTI2026

Tailoring Thermal and Mechanical Performance Through Multimaterial Laser Powder Directed Energy Deposition of Copper and 17-4PH Stainless Steel

This study investigates the additive manufacturing (AM) processing, microstructural evolution, and resulting mechanical and thermal properties of multimaterial components combining 17-4PH stainless steel and pure copper (Cu) fabricated via laser powder directed energy deposition (LP-DED). Conventional tooling steels exhibit limited thermal conductivity, significantly constraining production throughput in high-volume processes. Incorporating Cu, with its superior thermal conductivity, could significantly enhance tool performance, though Cu and steel present metallurgical incompatibilities when processed via AM. A systematic investigation was conducted across compositions ranging from 0 to 100 wt% Cu, revealing critical thresholds influencing solidification behavior, defect formation, microstructure, hardness, and thermal transport. Optical microscopy, electron backscatter diffraction (EBSD), hardness testing, and thermal conductivity measurements provided comprehensive process–structure–property correlations. Severe hot cracking occurred at low-Cu contents (6–25 wt%), aligning generally well with crack susceptibility modeling, with an unexpected discrepancy at 25 wt%. Porosity remained low (≥99% dense) throughout the compositional spectrum. EBSD analysis revealed a transformation from columnar martensitic structures at low-Cu contents to equiaxed FCC Cu-dominated structures at higher Cu concentrations, highlighting the complex microstructural transitions driven by Cu-induced changes in solidification and phase stability. Hardness decreased from 330 HV (pure 17-4PH) to 62 HV (pure Cu), consistent with microstructural changes. Concurrently, thermal conductivity improved substantially from 13.5 W/m K to 367.9 W/m K, emphasizing Cu’s dominant role in thermal transport. The findings highlight the feasibility of leveraging compositional gradients between 17-4PH and Cu to achieve tailored tooling with optimized thermal and mechanical performance.

17-4PH↗
NASA NTRS2020

Variation of Florida scrub vegetation along gradients of soil pH and landscape age on a barrier island complex

Florida scrub is a fire-maintained shrub vegetation of well-drained, sandy soils associated with ridge systems that originated as coastal dunes. It is unique to Florida and supports many rare plants and animals. Between 1992 and 2005, we sampled 30 stands of long-unburned scrub with 196 line-intercept transects (15 m length) across the Merritt Island-Cape Canaveral barrier island complex where dune ridges range from relatively recent to > 30,000 years old with a range of soil leaching and reaction. These data allow us to determine the relationships of landscape age and soil reaction on community composition. We recorded community composition in < 0.5 m and > 0.5 m height strata. We determined mapped soil type for all transects; for 151 transects we determined soil pH of the 0–15 cm and 15–30 cm layers. Hierarchical cluster analysis of stands (N=30) and transects (N=196) using 41 species (of 53) present in > 2 transects gave two groups: coastal scrub with Quercus virginiana (shrub form) and Serenoa repens as dominant species on the most alkaline soils, and oak-saw palmetto scrub with Quercus chapmanii, Quercus geminata, Quercus myrtifolia, and S. repens on the strongly to somewhat acidic soils. Direct gradient analysis indicated that dominant species except S. repens varied from acidic to alkaline soils. Indicator species analysis identified seven species that indicated acidic soils and five that indicated alkaline soils (P < 0.01). Nonmetric multidimensional scaling (NMS) ordination at the stand level separated the two groups along the first axis, and NMS ordination of the transect data showed the gradient of coastal to oak-saw palmetto scrub. Position of transects on the first axis was related to soil pH class, and to measured pH of the 0–15 cm and 15–30 cm layers. Soils show a progressive leaching of shell material from the surface horizons followed by podsolization; this process takes > 4,000 years. Our results indicate substantial differences between the community composition of scrub vegetation on recent alkaline soils compared to leached acidic soils.

Barrier island↗
DOE OSTI2025

Mixed lipid bilayers enable enhanced stability and activity retention of Lipase A in low-pH environments

Lipase A (LipA) from Bacillus subtilis is a versatile and industrially relevant enzyme, but its activity is compromised under acidic conditions due to aggregation and deactivation. In this study, we investigated the use of mixed lipid bilayers to stabilize and improve activity retention of LipA at low pH. Attachment to lipid bilayers, particularly those containing cationic lipids, greatly enhanced the long-term stability of LipA in acidic conditions while also leading to improvements in activity. Tethering to cationic bilayers not only shifted the apparent pH activity profile toward more acidic conditions, but also significantly enhanced activity retention upon incubation at pH 6. Notably, this protective effect persisted even without direct tethering, indicating that reversible, non-covalent interactions with the bilayer surface are sufficient for long-term stability. Circular dichroism further revealed that the secondary structure of LipA was retained, while dynamic light scattering suggested that activity loss in solution was primarily due to aggregation of the native state. Together, these findings support a model in which lipid bilayers mitigate aggregation and stabilize LipA through transient interactions and electrostatic modulation of the local surface environment. Furthermore, this approach exemplifies a simple, tether-free strategy for enhancing enzyme performance in acidic or destabilizing conditions, with implications for biocatalysis, biosensing, and therapeutic delivery.

Biocatalysis↗
DOE OSTI2026

Revealing the coupled oxygen and hypochlorite chemistry in saltwater batteries through operando pH and oxygen monitoring

Saltwater batteries (SWBs) that utilize Na⁺ ions from seawater have emerged as promising candidates for low-cost and sustainable grid-scale energy storage. To date, the cathode reaction mechanism of SWBs has been predominantly described by oxygen evolution and reduction reactions (OER/ORR). However, this assumption is valid only under idealized ocean-like conditions with constant pH and continuous oxygen replenishment. In practical systems, SWBs operate in finite volumes of saltwater, where saltwater composition dynamically evolves during cycling. Here, in this work, we systematically investigate the cathode reaction mechanisms of SWBs under finite saltwater conditions using galvanostatic cycling combined with electrochemical diagnostics and operando monitoring of dissolved oxygen and pH. Our results reveal that the cathode chemistry during SWB operation is considerably more complex than previously assumed. In addition to OER and ORR, hypochlorite formation and consumption reactions, along with pH-dependent switching of dominant reaction pathways, play critical roles. We further identify the sequence and relative contributions of these reactions throughout charge–discharge cycling. These findings provide a comprehensive and mechanistically grounded understanding of SWB cathode processes under relatively realistic cell design and operation condition. The insights presented here establish a new framework for interpreting SWB electrochemistry and offer directions for future strategies aimed at improving performance, stability, and practical viability.

Hypochlorite redox reaction↗
DOE OSTI2025

Influence of americium complexation on the radiation-induced chemical reactivity of sulfophenyl bistriazinyl pyridine (SO 3 -Ph-BTP) towards the nitrate radical

Sulfophenyl bistriazinyl pyridine (SO 3 -Ph-BTP) is a hydrophilic organic ligand used to separate actinides and lanthanides. Dose accumulation and time-resolved studies have previously provided insight into the radiolytic stability and degradation pathways of SO 3 -Ph-BTP in reprocessing environments, but no study has yet addressed the impact of minor actinide complexation on the radiation chemistry of this ligand. To begin to fill this knowledge gap, a systematic, time-resolved study exploring the reactivity of the nitrate radical (NO 3 • ) with SO 3 -Ph-BTP in the presence of trivalent americium, Am(III), has been conducted, which demonstrates enhanced reactivity (an order of magnitude faster) upon metal complexation.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2025

Carbon availability, soil pH, and microbial allocation to nitrogen acquisition shape grassland heterotrophic respiration in response to a decade of nitrogen addition

Previous work has found that anthropogenic inputs of nitrogen (N) and phosphorus (P) impact heterotrophic respiration during soil organic matter decomposition in grasslands, a critical pathway through which carbon (C) is lost from soil to the atmosphere. While N addition typically reduces heterotrophic respiration, why the strength and direction of this N effect varies among sites is unclear. Here, to address this, we conducted a 339-day laboratory incubation to measure heterotrophic respiration from nine grasslands across North America that have received 10 years of factorial N and P fertilization. N addition reduced cumulative respiration most at sites with low pH, low microbial allocation towards N acquisition, and high soil C concentration and availability. However, N addition had neutral rather than positive effects on heterotrophic respiration in sites with high pH and decomposer allocation towards N acquisition. Across sites, a decade of N addition reduced heterotrophic respiration by ∼24 %, driven by reductions in microbial biomass. Heterotrophic respiration was less sensitive to P addition, despite its increasing microbial biomass. However, simultaneous N and P addition did ameliorate negative N effects. These results show that previously observed variation in the response of heterotrophic respiration to N addition can be explained by soil C availability and pH status, widely measured factors which can be used to predict how grassland C fluxes may change under continuing nutrient deposition.

N addition↗
DOE OSTI2025

Nitrogen fixation in Pampinifervens , a new species-rich genus of Aquificaceae that inhabits a wide pH range in terrestrial hot springs

Members of the Aquificota play important roles in hydrogen, sulfur, and carbon cycles in geothermal systems as ubiquitous and abundant chemolithoautotrophs; however, their roles in the nitrogen cycle are poorly defined. Here, we show that Aquificaceae isolate T-2 T from Tengchong, China, fixes nitrogen based on growth with dinitrogen as the sole nitrogen source and incorporation of 15 N atoms when grown with 15 N 2 . We further show evidence that suggests its nitrogen fixation (nif) genes are transcribed in situ in a nearby spring. We propose the name Pampinifervens diazotrophicum gen. et sp. nov., with strain T-2 T (= JCM 35475 T = DSM 116324 T ) as the nomenclatural type. Its close relative designated Pampinifervens florentissimum sp. nov. T-8 T (= CGMC 1.5214 T = JCM 33569 T ) does not fix nitrogen but respires nitrate. Analysis of 104 metagenome-assembled genomes from 84 metagenomes allowed us to circumscribe the genus Pampinifervens and identify at least 16 sympatric Pampinifervens species that dominate the Aquificaceae populations in diverse hot springs in southwest China, with distinct species globally. Analysis of these Pampinifervens genomes revealed variable presence of nif and denitrification genes and frequent gene loss and horizontal transfer. Genes for pH homeostasis were also present in Pampinifervens genomes, with a proliferation in species from Tengchong, consistent with the wide pH growth range of both Pampinifervens isolates and the prevalence of Pampinifervens in both alkaline and acidic springs. The dynamic evolution of nif and denitrification genes, along with pH homeostasis genes, may facilitate the diversification of Pampinifervens into diverse springs with different nitrogen availability.

Aquificae↗
DOE OSTI2025

Synthesis and Characterization of [Ni(H 2 O)(7-P Ph 2 N ArSO3 ) 2 ](NaBF 4 ) for Light-Driven Quantum Dot-Catalyst Hydrogen Evolution

Light-driven hydrogen generation from water is a route to carbon-neutral fuels. However, the integrated light absorbers and catalysts must be compatible and functional under the same conditions. A sulfate-functionalized complex, [Ni(H 2 O)(7-P Ph 2 N ArSO3 ) 2 ](NaBF 4 ), where P Ph 2 N ArSO3 = 4-(3,6-diphenyl-1,3,6-azadiphosphepan-1-yl)benzenesulfonate), was synthesized and characterized. A solid-state structure from single-crystal X-ray crystallography is also reported. The electrocatalytic activity for hydrogen evolution of this complex in 7:3 H 2 O:CH 3 CN was characterized by cyclic voltammetry and controlled potential electrolysis, with a maximum observed rate of 83 s –1 . Density functional theory was used to characterize the favorable binding of the sulfate functionalities to cadmium sulfide quantum dots. Experimental assembly of these catalysts onto cadmium sulfide quantum dots was successful. In conclusion, both fast electron transfer and light-driven pH-dependent hydrogen evolution were observed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Universal Reversible Hydrogen Potential for Electrocatalytic Ammonia Splitting Reactions in Nonaqueous Solvents from Unified pH Measurements

In this work, we introduce a new approach of using differential potentiometric measurements in four nonaqueous solvents─MeCN, THF, DMF, and PC─to determine the universal pH abs H 2 O values aligned to the aqueous pH scale for dilute NH 4 + /NH 3 solutions. Knowledge of the pH abs H 2 O values allows simple determination of the reversible hydrogen potential in any given solvent relative to the aqueous standard hydrogen electrode (SHE) and, most importantly, ensures comparability across different solvents. As an independent method, Open Circuit Potenial measurements were carried out in the same solvents titrated with NH 4 + /NH 3 to obtain alternative values for the reversible hydrogen potential in these solvents. The close agreement of these two methods, as well as calculated potentials from literature values when available, substantiates the new, simpler, and more robust approach to determine the reversible hydrogen potential introduced here. We further use the reversible hydrogen potential values established here to report, for the first time, the overpotential for ammonia oxidation as a function of solvent, with a recently discovered ruthenium catalyst.

ammonia↗
DOE OSTI2025

HEPOM: Using Graph Neural Networks for the Accelerated Predictions of Hydrolysis Free Energies in Different pH Conditions

Hydrolysis is a fundamental family of chemical reactions where water facilitates the cleavage of bonds. The process is ubiquitous in biological and chemical systems, owing to water’s remarkable versatility as a solvent. However, accurately predicting the feasibility of hydrolysis through computational techniques is a difficult task, as subtle changes in reactant structure like heteroatom substitutions or neighboring functional groups can influence the reaction outcome. Furthermore, hydrolysis is sensitive to the pH of the aqueous medium, and the same reaction can have different reaction properties at different pH conditions. In this work, we have combined reaction templates and high-throughput ab initio calculations to construct a diverse data set of hydrolysis free energies. The developed framework automatically identifies reaction centers, generates hydrolysis products, and utilizes a trained graph neural network (GNN) model to predict ΔG values for all potential hydrolysis reactions in a given molecule. The long-term goal of the work is to develop a data-driven, computational tool for high-throughput screening of pH-specific hydrolytic stability and the rapid prediction of reaction products, which can then be applied in a wide array of applications including chemical recycling of polymers and ion-conducting membranes for clean energy generation and storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Climate induced microbiome alterations increase cadmium bioavailability in agricultural soils with pH below 7

Climate change and metals independently stress soil microbiomes, but their combined effects remain unresolved. Here we show that future climate affects soil cadmium through altered soil microbiome and nutrient cycles, with soil pH as critical factor. In soils with pH<7 and during summer temperatures, future climate increased porewater cadmium, shifting total and potentially active taxonomic microbiome structures. Microbial ammonium oxidation released protons liberating cadmium through cation exchange from mineral surfaces. When porewater cadmium levels became toxic to non-cadmium-tolerant bacteria, microbial activity, and nutrient cycling decreased, reducing carbon and nitrogen emissions. In contrast, pH>7 soil show no climate impacts on cadmium mobilization, though imprints on microbiome structure were apparent. Subsequent nutrient cycling increased under future climate, stimulating soil respiration and nitrous oxide release. These findings underscore complex interactions between climate change and soil contaminants affecting the soil microbiome and its activity and highlights potential impacts on crop production, groundwater quality, and climate feedback.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Soft x-ray spectroscopy of ammonium sulfate aerosols at varied pH conditions

Aqueous aerosols are useful model systems for understanding the physical chemistry that takes place in the Earth’s atmosphere, as well as the chemistry of other solar system objects. Ammonium sulfate aerosols are impacted by anthropogenic sources such as farming and shipping and are understood to be important seeds of cloud nucleation in the atmosphere, affecting climate. X-ray photoelectron spectroscopy and near edge x-ray absorption fine structure spectroscopy were used in tandem to probe the surface and bulk properties of aqueous (NH 4 ) 2 SO 4 , respectively. Aerosolized solutions of (NH 4 ) 2 SO 4 , some altered with NaOH to modify pH, were introduced via an aerodynamic lens to a velocity map imaging instrument for detection. The results show that as pH and sodium cation concentration increase, sulfate anion and ammonia become more prevalent at the surface, and the aerosol surface appears to become drier. However, most of the aerosol remains aqueous, with ion concentrations insensitive to the addition of NaOH. Density functional theory calculations were also performed to probe the coordination environment at the aerosol surfaces to understand the underlying phenomena. Finally, the changes seen on the surface of the aerosol underscore the importance of pH in regulating the structure and chemical properties of atmospherically relevant aerosols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Corrosion Fatigue Life Evaluation of 17-4PH in Support of Water Filled Turbine Hubs

High cycle corrosion fatigue (HCCF) life S-N tests were conducted on wrought 17-4PH in various water environments under accelerated testing conditions. For tests conducted in aerated Columbia River water and in aerated ASTM Type IV water, at ~10 6 cycles, the HCCF stress amplitude was ~70% of the value in air. For deaerated water, the value was ~80%. These values are consist with the small amount of literature data on HCCF life of 17-4PH in water environments. The measured fatigue life both in air and water are much better than the ASME trend curve of high cycle fatigue life of moderate and high strength steels. Measured values were also much better than found in a hydropower-relevant study in the literature on cast 17-4PH. The effect of Amersite 61W on HCCF life was evaluated and found to cause very low times to specimen failure compared to all other water environments.

13 HYDRO ENERGY↗
DOE OSTI2025

Feature Based Qualification of 17-4PH Stainless Steel to Evaluate Location-Specific Variability in Wire Arc Additive Manufacturing

Qualifying large-scale metal additive manufacturing (M-AM) technologies such as wire arc additive manufacturing (WAAM) can be challenging. This is especially significant in precipitation hardened martensitic stainless steels like SS 17-4PH, where thermal histories induce location-specific microstructural variability and property anisotropy. The Department of Defense (DOD) and the United States Army Combat Capabilities Development Command Ground Vehicle Systems Center (GVSC) Ground Vehicle Materials Engineering (GVME) aim to build robust and qualified large-scale M-AM workflows that could reduce the time and cost through quick and informed evaluation, testing, and development of feedstock, processes, and parts. The report presents the findings from the collaborative efforts between Oak Ridge National Laboratory (ORNL) and the U.S. Army GVSC GVME. The aim of this project was to develop a geometric feature-based qualification framework for WAAM of SS 17-4PH components. This report outlines selection methodology of representative build geometries, optimization of WAAM process parameters, in-situ monitoring, microstructure-property evaluation, thermal simulations, as well as data visualization techniques incorporated in this project. The results from this project demonstrate a clear understanding of thermal history dependent phase evolution and consequent location-specific property variations in WAAM of SS 17-4PH. These results in conjunction with the data-driven methodologies used in this project are expected to reduce qualification timelines, improve predictability, and accelerate the development of reliable feature-based qualification strategies for part production via large-scale M-AM technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of Oxalic Acid Consumption and pH on the In Vitro Biological Control of Oxalogenic Phytopathogen Sclerotinia sclerotiorum

The phytopathogenic fungus Sclerotinia sclerotiorum has a wide host range and causes significant economic losses in crops worldwide. This pathogen uses oxalic acid as a virulence factor; for this reason, the degradation of this organic acid by oxalotrophic bacteria has been proposed as a biological control approach. However, previous studies on the potential role of oxalotrophy in biocontrol did not investigate the differential effect of oxalic acid consumption and the subsequent pH alkalinisation on fungal growth. In this study, confrontation experiments on different media using a wild-type (WT) strain of S. sclerotiorum and an oxalate-deficient mutant (strain Δoah) with the soil oxalotrophic bacteria Cupriavidus necator and Cupriavidus oxalaticus showed the combined effect of media composition on oxalic acid production, pH, and fungal growth control. Oxalotrophic bacteria were able to control S. sclerotiorum only in the medium in which oxalic acid was produced. However, the deficient Δoah mutant was also controlled, indicating that the consumption of oxalic acid is not the sole mechanism of biocontrol. WT S. sclerotiorum acidified the medium when inoculated alone, while for both fungi, the pH of the medium changed from neutral to alkaline in the presence of bacteria. Therefore, medium alkalinisation independent of oxalotrophy contributes to fungal growth control.

Estoppey, Aislinn (ORCID:0000000347410835)↗
DOE OSTI2024

Cost-optimal selection of pH control for mineral scaling prevention in high recovery reverse osmosis desalination

Conference proceedings for Foundations of Computer Aided Process Design (FOCAPD) 2024 that details a cost optimization model for pH control to prevent mineral scaling in high recovery reverse osmosis. This work applies a framework for incorporating detailed water chemistry predictions such as precipitation, pH change, and mineral scaling tendencies with process-scale optimization. It demonstrates that the acid choice for pH control can have a significant impact on pretreatment costs.

Amusat, Oluwamayowa↗
NASA NTRS1984

The PH-D proposal - A manned mission to Phobos and Deimos

The rationale for a manned mission to the satellites of Mars is discussed. The view has been expressed that NASA must define a major program to follow the Shuttle and to utilize it. However, such a program could not be initiated and proceed without public support, and to obtain this support, public interest would have to be excited. It is shown that, of a number of possible targets for manned exploration in the solar system, Mars appears to be the only possible candidate. Attention is given to a comparison of three Mars missions, a Mars 1984 mission, a manned landing on Mars surface, a manned landing on Phobos and Deimos (Ph-D project), putting men in Mars orbit, the capabilities of the Ph-D mission, a description of the spacecraft, a Ph-D project operations plan, and aspects of timing, technology, and costs.

Singer, S. F.↗