Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Diffusional transport and predicting oxidative failure during cyclic oxidation of beta-NiAl alloys

Nickel aluminides (NiAl) containing 40-50 at. percent Al and up to 0.1 at. percent Zr have been studied following cyclic oxidation at 1200, 1300, 1350 and 1400 C. The selective oxidation of aluminum resulted in the formation of protective Al2O3 scales on each alloy composition at each temperature. However, repeated cycling eventually resulted in the gradual formation of less protective NiAl2O4. The appearance of the NiAl2O4, signaling the end of the protective scale-forming capability of the alloy, was related to the presence of gamma-prime-(Ni3Al) which formed as a result of the loss of aluminum from the sample. A simple methodology is presented to predict the protective life of beta-NiAl alloys. This method predicts the oxidative lifetime due to aluminum depletion when the aluminum concentration decreases to a critical concentration. The time interval preceding NiAl2O4 formation (i.e., the lifetime based on protective Al2O3 formation) and predicted lifetimes are compared and discussed. Use of the method to predict the maximum use temperature for NiAl-Zr alloys is also discussed.

Nesbitt, J. A.↗
NASA NTRS1994

Thermal-oxidative Pretreatment and Evaluation of Poly (hexafluoropropene Oxide) Fluids

Two commercial poly(hexafluoropropene oxide) fluids were thermally pretreated at 343 C in pure oxygen. IR and NMR spectra indicate that this pretreatment was effective in removing hydrogen end-capped impurities. Decrease in the quantity of volatile material produced during thermal oxidative decomposition and increase in the thermal decomposition temperature indicated improvement in the stability of the fluids. However, this pretreatment failed to render the fluids completely stable in oxidizing atmospheres at 316 C in the presence of metal alloys.

Paciorek, K. J. L.↗
NASA NTRS1995

Oxidants and oxidation in the Earth's atmosphere

The 1994 BOC Priestley Conference was held at Bucknell University in Lewisburg, Pennsylvania, from June 24 through June 27, 1994. This conference, managed by the American Chemical Society (ACS), was a joint celebration with the Royal Society of Chemistry (RSC) commemorating Joseph Priestley's arrival in the U.S. and his discovery of oxygen. The basic theme of the conference was 'Oxidants and Oxidation in the Earth's Atmosphere,' with a keynote lecture on the history of ozone. A distinguished group of U.S. and international atmospheric chemists addressed the issues dominating current research and policy agendas. Topics crucial to the atmospheric chemistry of global change and local and regional air pollution were discussed. The program for the conference included four technical sessions on the following topics: (1) Oxidative Fate of Atmospheric Pollutants; (2) Photochemical Smog and Ozone; (3) Stratospheric Ozone; and (4) Global Tropospheric Ozone.

Source record↗
NASA NTRS1995

Prebiotic polymerization: Oxidative polymerization of 2, 3-dimercapto-1-propanol on the surface of iron(III) hydroxide oxide

The oxidation of 2, 3-dimercapto-1-propanol by ferric ions on the surface of iron(III) hydroxide oxide (Fe(OH)O) yielded polydisulfide oligomers. This polymerization occurred readily at low dithiol concentration under mild aqueous conditions. Polydisulfide polymers up to the 15-mer were synthesized from 1 mM dithiol in 5 ml water reacted with iron(III) hydroxide oxide (20 mg, 160 micromole Fe) for 3 days under anaerobic conditions at 40 C and pH 4. About 91% of the dithiol was converted to short soluble oligomers and 9% to insoluble larger oligomers that were isolated with the Fe(OH)O phase. Reactions carried out at the same ratio of dithiol to Fe(OH)O but at higher dithiol concentrations gave higher yields of the larger insoluble oligomers. The relationship of these results to prebiotic polymer synthesis is discussed.

Weber, Arthur L.↗
NASA NTRS1995

Thermal-oxidative pretreatment and evaluation of poly(hexafluoropropene oxide) fluids

Two commercial poly(hexafluoropropene oxide) fluids were thermally pretreated at 343 C in pure oxygen. IR and nuclear magnetic resonance(NMR) spectra indicate that this pretreatment was effective in removing hydrogen end-capped impurities. A decrease in the quantity of volatile material produced during thermal oxidative decomposition and increase in the thermal decomposition temperature indicated improvement in the stability of the fluids. However, this pretreatment failed to render the fluids completely stable in oxidizing atmospheres at 316 C in the presence of metal alloys.

Paciorek, K. J. L.↗
NASA NTRS1994

Prebiotic Oxidative Polymerization of 2,3 Dimercaptopropanol on the Surface of Iron(III) Hydroxide Oxide

The oxidation of 2,3-Dimercapto-1-propanol by ferric ions on the surface of iron (III) hydroxide oxide yielded polydisulfide polymers. This polymerization occured readily at low dithiol concentration under mild aqueous conditions. Polydisulfide polymers up to the 15-mer were synthesized from 1 mM dithiol in 5 ml water reacted with iron (III) hydroxide oxide (20 mg, 160 micro mole Fe) for 3 days under anaerobic conditions at 40 C and pH 4. About 91% of the dithiol was converted to short soluble oligomers and 9% to insoluble larger oligomers that were isolated with the mineral phase. Reactions at higher dithiol concentrations with the same ratio of dithiol to mineral gave a higher yield of the larger insoluble oligomers. The relationship of these results to prebiotic polymer synthesis will be discussed.

Weber, Arthur L.↗
NASA NTRS1995

Prebiotic Polymerization: Oxidative Polymerization of 2,3 Dimercapto-1- Propanol on the Surface of Iron(III) Hydroxide Oxide

The oxidation of 2,3-dimercapto-1-propanol by ferric ions on the surface of iron(III) hydroxide oxide (Fe(OH)O) yielded polydisulfide oligomers. This polymerization occurred readily at low dithiol concentration under mild aqueous conditions. Polydisulfide polymers up to the 15-mer were synthesized from 1 mM dithiol in 5 ml water reacted with iron(III) hydroxide oxide (20 mg, 160 micromole Fe) for 3 days under anaerobic conditions at 40 C and pH 4. About 91% of the dithiol was converted to short soluble oligomers and 9% to insoluble larger oligomers that were isolated with the FE(OH)O phase. Reactions carried out at the same ratio of dithiol to FE(OH)O but at higher dithiol concentrations gave higher yields of the larger insoluble oligomers. The relationship of these results to prebiotic polymer synthesis is discussed.

Weber, Arthur L.↗
NASA NTRS2002

Oxidation- and Creep-Enhanced Fatigue of Haynes 188 Alloy-Oxide Scale System Under Simulated Pulse Detonation Engine Conditions

The development of the pulse detonation engine (PDE) requires robust design of the engine components that are capable of enduring harsh detonation environments. In this study, a high cycle thermal fatigue test rig was developed for evaluating candidate PDE combustor materials using a CO2 laser. The high cycle thermal fatigue behavior of Haynes 188 alloy was investigated under an enhanced pulsed laser test condition of 30 Hz cycle frequency (33 ms pulse period, and 10 ms pulse width including 0.2 ms pulse spike). The temperature swings generated by the laser pulses near the specimen surface were characterized by using one-dimensional finite difference modeling combined with experimental measurements. The temperature swings resulted in significant thermal cyclic stresses in the oxide scale/alloy system, and induced extensive surface cracking. Striations of various sizes were observed at the cracked surfaces and oxide/alloy interfaces under the cyclic stresses. The test results indicated that oxidation and creep-enhanced fatigue at the oxide scale/alloy interface was an important mechanism for the surface crack initiation and propagation under the simulated PDE condition.

Zhu, Dongming↗
NASA NTRS2007

UV Induced Oxidation of Nitric Oxide

Nitric oxide in a gaseous stream is converted to nitrogen dioxide using oxidizing species generated at least in part using in situ UV radiation sources. The sources of the oxidizing species include oxygen and/or hydrogen peroxide. The oxygen may be a component of the gaseous stream or added to the gaseous stream, preferably near a UV radiation source, and is converted to ozone by the UV irradiation. The hydrogen peroxide is decomposed through a combination of vaporization and UV irradiation. The hydrogen peroxide is preferably stored at stable concentration levels, i.e., approximately 50% by volume and increased in concentration in a continuous process preceding vaporization within the flow channel of the gaseous stream and in the presence of the UV radiation sources.

Parrish, Clyde, F.↗
NASA NTRS2008

Novel Carbon Dioxide Microsensor Based on Tin Oxide Nanomaterial Doped With Copper Oxide

Carbon dioxide (CO2) is one of the major indicators of fire and therefore its measurement is very important for low-false-alarm fire detection and emissions monitoring. However, only a limited number of CO2 sensing materials exist due to the high chemical stability of CO2. In this work, a novel CO2 microsensor based on nanocrystalline tin oxide (SnO2) doped with copper oxide (CuO) has been successfully demonstrated. The CuO-SnO2 based CO2 microsensors are fabricated by means of microelectromechanical systems (MEMS) technology and sol-gel nanomaterial-synthesis processes. At a doping level of CuO: SnO2 = 1:8 (molar ratio), the resistance of the sensor has a linear response to CO2 concentrations for the range of 1 to 4 percent CO2 in air at 450 C. This approach has demonstrated the use of SnO2, typically used for the detection of reducing gases, in the detection of an oxidizing gas.

Xu, Jennifer C.↗
NASA NTRS2015

Oxide_Oxide Ceramic Matrix Composite (CMC) Exhaust Mixer Development in the NASA Environmentally Responsible Aviation (ERA) Project

LibertyWorks®, a subsidiary of Rolls-Royce Corporation, first studied CMC (ceramic matrix composite) exhaust mixers for potential weight benefits in 2008. Oxide CMC potentially offered weight reduction, higher temperature capability, and the ability to fabricate complex-shapes for increased mixing and noise suppression. In 2010, NASA was pursuing the reduction of NOx emissions, fuel burn, and noise from turbine engines in Phase I of the Environmentally Responsible Aviation (ERA) Project (within the Integrated Systems Research Program). ERA subtasks, including those focused on CMC components, were being formulated with the goal of maturing technology from Proof of Concept Validation (Technology Readiness Level 3 (TRL 3)) to System/Subsystem or Prototype Demonstration in a Relevant Environment (TRL 6). LibertyWorks®, a subsidiary of Rolls-Royce Corporation, first studied CMC (ceramic matrix composite) exhaust mixers for potential weight benefits in 2008. Oxide CMC potentially offered weight reduction, higher temperature capability, and the ability to fabricate complex-shapes for increased mixing and noise suppression. In 2010, NASA was pursuing the reduction of NOx emissions, fuel burn, and noise from turbine engines in Phase I of the Environmentally Responsible Aviation (ERA) Project (within the Integrated Systems Research Program). ERA subtasks, including those focused on CMC components, were being formulated with the goal of maturing technology from Proof of Concept Validation (Technology Readiness Level 3 (TRL 3)) to System/Subsystem or Prototype Demonstration in a Relevant Environment (TRL 6). Oxide CMC component at both room and elevated temperatures. A TRL≈5 (Component Validation in a Relevant Environment) was attained and the CMC mixer was cleared for ground testing on a Rolls-Royce AE3007 engine for performance evaluation to achieve TRL 6.

propulsion↗
NASA NTRS2019

Reformulation of Oxide Growth Equations for Oxidation of Silicon Bond Coat in Environmental Barrier Coating Systems

The formulation of Deal and Grove for the oxidation of silicon and the growth of a silica layer is revisited to include the effects of a protective coating layer. The linear-parabolic equation of the form x_o^2+Ax_o=Bt is still applicable, but the expressions for the constants A and B must be modified to account for the coating. The modified expression for A is a linear function of the coating thickness. The expression for B is modified by the relative solubility of the outer coating layer. The modified expressions are applied to assess recently published experimental results for the oxidation of a silicon bond coat in an environmental barrier coating (EBC). Conclusions are drawn regarding the diffusivity and solubility of oxidants in the EBC top coating.

Sullivan, Roy M.↗
DOE OSTI2024

In situ oxidation of reduced graphene oxide membranes by peracetic acid for dye desalination

Graphene oxide (GO) membranes with tunable interlayer spacings are of interest for dye removal from salty textile wastewater, and the membranes are often reduced to improve their stability, which inevitably lowers water permeance. Herein, we demonstrate that reduced GO (rGO) membranes can be facilely modified using peracetic acid (PAA) in situ to dramatically enhance water permeance while retaining dye rejection. Specifically, PAA-modified membranes (PrGO) are synthesized by vacuum-filtering hydrazine-reduced rGO nanosheets onto Nylon substrate and then exposing them to PAA solutions. The effects of the rGO layer thickness, PAA content, and PAA exposure time on the membrane chemistry, nanostructures, and salt/dye separation properties are thoroughly examined. For example, the PAA oxidation of a 100 nm-thick rGO membrane for 10 min increases water permeance by 180 %, from 35 to 93 Liter m −2 h −1 bar −1 , and decreases Na 2 SO 4 rejection from 10 % to 3.3 % while retaining the rejection of Congo red at ≈99.7 %. The PrGO membranes exhibit stable water permeance and >99 % dye rejection in multi-cycle tests in a crossflow system, surpassing state-of-the-art GO membranes and showcasing their potential for practical applications.

Dye desalination↗
DOE OSTI2025

Pt Nanoparticle Disintegration at Oxide Interfaces Enhances CO Oxidation Catalysis

Understanding how supported metal nanoparticles dynamically evolve under reaction conditions is critical for controlling their catalytic function. Here, the mechanism behind the dynamic disintegration of Pt nanoparticles (NPs) supported on CeOx-TiO2 (CT) during CO oxidation is elucidated, leading to the formation of single atoms (SAs) and/or sub-nanometer clusters. Density functional theory (DFT) calculations reveal that strong Pt-CO interactions weaken Pt─Pt cohesion, while electronic coupling between Pt and Ce ions stabilizes Pt-CO* intermediates at the oxide interface. Surface oxygen vacancies kinetically trap Pt-CO*, but the vacancies are replenished under oxygen-rich conditions, enabling Pt-CO* surface diffusion and subsequent structural reorganization. In situ spectroscopic analyses confirm the oxygen-driven transformation of Pt NPs, correlating with a threefold increase in mass-specific activity at 150 °C. These findings demonstrate that interfacial oxygen dynamics and metal-support interactions can be leveraged to induce nanoparticle disintegration and optimize catalytic performance, highlighting the catalytic potential of interface-engineered Pt nanostructures.

CO oxidation↗
DOE OSTI2024

Characteristics of graphene oxide-like materials prepared from different deashed-devolatilized coal chars and comparison with graphite-based graphene oxide, with or without the ultrasonication treatment

Deashed-devolatilized coal chars were prepared from anthracite, bituminous, subbituminous, and lignite coals, then oxidized to prepare graphene oxide (GO)-like materials that were extensively characterized and compared with a pristine graphite-based GO sample (CGO). Coal-based GO-like materials and CGO were then subjected to ultrasonication treatment for delamination, which also impacted their physicochemical properties. The surface oxygen contents of CGO and coal-based samples were ~32 % and ~26–35 %, respectively, that were reduced to ~27 % and ~21–24 %, respectively, after ultrasonication. The Fourier transform infrared and X-ray photoelectron spectroscopy spectra of all samples showed different profiles before and after the ultrasonication, suggesting a change in chemical functionalities. The Raman spectra of CGO and coal-based samples exhibited similar D and G bands with D/G intensity ratios (I D /I G ) of 0.93 and 0.88–0.92, respectively. The I D /I G ratio of CGO and most of the coal-based samples increased after the ultrasonication due to creation of more defects. The main X-ray diffraction (XRD) peak for CGO and coal-based samples were observed at ~11° and ~22–24°, respectively. Ultrasonication of the samples resulted in a reduction of crystallite size and number of layers for all CGO and coal-based samples, confirming both splitting and delamination of carbon layers. Additionally, different coal-based samples exhibited almost overlapping XRD profiles after the ultrasonication.

36 MATERIALS SCIENCE↗