SEARCH · Engineering Papers

Results for “numerical approximation & analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1975

A subvortex technique for the close approach to a discretized vortex sheet

The close-approach problem associated with flow calculation methods based on vortex-lattice theory was examined numerically using two-dimensional discretized vortex sheets. The analysis first yields a near-field radius of approximately the distance apart of the vortices in the lattice; only within this distance from the sheet are the errors arising from the discretization significant. Various modifications to the discrete vortices are then considered with the objective of reducing the errors. This leads to a near-field model in which a vortex splits into an increasing number of subvortices as it is approached. The subvortices, whose strengths vary linearly from the vortex position, are evenly distributed along an interpolated curve passing through the basic vortices. This subvortex technique can be extended to the three-dimensional case and is efficient because the number of vortices is effectively increased, but only where and when needed.

Maskew, B.↗

NASA NTRS1982

Numerical solution of transonic wing flow fields

A fast, fully implicit, approximate factorization algorithm designed to solve the conservative full-potential equation is used to compute lifting-wing flow fields with embedded transonic flow. The computer program (TWING - transonic wing analysis) uses an elliptic-solver numerical grid-generation routine and is capable of analyzing arbitrary wing geometries with sweep, twist, taper, and section variation. Computed flowfield results for several wing geometries are presented; they demonstrate substantial improvement in convergence speed relative to the FL028 computer code.

Holst, T. L.↗

NASA NTRS1988

Nonequilibrium flow computations. 1: An analysis of numerical formulations of conservation laws

Modern numerical techniques employing properties of flux Jacobian matrices are extended to general, nonequilibrium flows. Generalizations of the Beam-Warming scheme, Steger-Warming and van Leer Flux-vector splittings, and Roe's approximate Riemann solver are presented for 3-D, time-varying grids. The analysis is based on a thermodynamic model that includes the most general thermal and chemical nonequilibrium flow of an arbitrary gas. Various special cases are also discussed.

Liu, Yen↗

NASA NTRS1989

Nonequilibrium flow computations. I - An analysis of numerical formulations of conservation laws

Liu, Yen↗

NASA NTRS1945

Numerical Evaluation by Harmonic Analysis of the (Epsilon)-Function of the Theodorsen Arbitrary-Airfoil Potential Theory

Finite trigonometric series is fitted by harmonic analysis as an approximation function to the psi function of the Theodorsen arbitrary-airfoil potential theory. By harmonic synthesis, the corresponding conjugate trigonometric series is used as an approximation to the epsilon function. A set of coefficients of particularly simple form is obtained algebraically for direct calculation of the epsilon values from the corresponding set of psi values. Complete derivation of this process is presented.

Naiman, Irven↗

NASA NTRS1961

Constant Density Approximations for the Flow Behind Axisymmetric Shock Waves

The incompressible rotational flow equations are used to obtain solutions for the flow behind axisymmetric shock waves with conic longitudinal sections. The nonlinear part of the term due to rotation is retained in the analysis. Numerical results for standoff distance and stagnation point velocity gradient are presented for the case in which the shock wave is a paraboloid, a sphere, or an oblate or prolate ellipsoid. A similarity parameter is proposed which correlates approximately the flow behind geometrically similar shock waves at different free-stream conditions.

Munson, Albert G.↗

NASA NTRS1988

Hybrid transfinite element modeling/analysis of nonlinear heat conduction problems involving phase change

The present paper describes the applicability of hybrid transfinite element modeling/analysis formulations for nonlinear heat conduction problems involving phase change. The methodology is based on application of transform approaches and classical Galerkin schemes with finite element formulations to maintain the modeling versatility and numerical features for computational analysis. In addition, in conjunction with the above, the effects due to latent heat are modeled using enthalpy formulations to enable a physically realistic approximation to be dealt computationally for materials exhibiting phase change within a narrow band of temperatures. Pertinent details of the approach and computational scheme adapted are described in technical detail. Numerical test cases of comparative nature are presented to demonstrate the applicability of the proposed formulations for numerical modeling/analysis of nonlinear heat conduction problems involving phase change.

Tamma, Kumar K.↗

NASA NTRS1973

The relativistic dynamics of a point charge in the field of a plane electromagnetic wave traveling in the direction of a uniform static magnetic field

The motion of a charged particle in electromagnetic fields of various geometric configurations and arising from a variety of sources is of intrinsic interest in electromagnetic theory. The particular configuration consisting of a plane wave propagating in the presence of a static uniform magnetic field whose direction is parallel to the wave normal is examined. The analysis presented here is treated within the context of classical electromagnetic theory. A numerical solution - at least to the approximate Lorentz-Dirac equation - is obtained.

Mitchell, T. P.↗

NASA NTRS1994

Analytic model of aurorally coupled magnetospheric and ionospheric electrostatic potentials

This paper describes modest but significant improvements on earlier studies of electrostatic potential structure in the auroral region using the adiabatic auroral arc model. This model has crucial nonlinearities (connected, for example. with aurorally produced ionization) which have hampered analysis; earlier work has either been linear, which I will show is a poor approximation or, if nonlinear, either numerical or too specialized to study parametric dependencies. With certain simplifying assumptions I find new analytic nonlinear solutions fully exhibiting the parametric dependence of potentials on magnetospheric (e.g.. cross-tail potential) and ionospheric (e.g., recombination rate) parameters. No purely phenomenological parameters are introduced. The results are in reasonable agreement with observed average auroral potential drops, inverted-V scale sizes, and dissipation rates. The dissipation rate is quite comparable to tail energization and transport rates and should have a major effect on tail and magnetospheric dynamics. This paper gives various relations between the cross-tail potential and auroral parameters (e.g., total parallel currents and potential drops) which can be studied with existing data sets.

Cornwall, J. M.↗

NASA NTRS2010

Multiple Exhaust Nozzle Effects on J-2X Gas Generator Outlet Impedance

The current test setup of the J-2X gas generator system uses a multiple nozzle configuration to exhaust hot gases to drive the propellant supply turbines. Combustion stability assessment of this gas generator design requires knowledge of the impedance effects the multiple nozzle configuration creates on the combustion chamber acoustic modes. Parallel work between NASA and Sierra Engineering is presented, showing two methods used to calculate the effective end impedance resulting from multiple nozzle configurations. The NASA method is a simple estimate of the effective impedance using the long wavelength approximation. Sierra Engineering has developed a more robust numerical integration method implemented in ROCCID to accommodate for multiple nozzles. Analysis using both methods are compared to J-2X gas generator test data collected over the past year.

Kenny, R. Jeremy↗

NASA NTRS1988

Singular perturbation analysis of the atmospheric orbital plane change problem

A three-state model is presented for the aeroassisted orbital plane change problem. A further model order reduction to a single state model is examined using singular perturbation theory. The optimal solution for this single state model compares favorably with the exact numerical solution using a four-state model; however, a separate boundary layer solution is required to satisfy the terminal constraint on altitude. This, in general, involves the solution of a two-point boundary value problem, but for a two-state model. An approximation is introduced to obtain an analytical control solution for lift and bank angle. Included are numerical simulation results of a guidance law derived from this analysis, along with comparison to earlier work by other researchers.

Calise, A. J.↗

NASA NTRS1970

Flutter, vibration, and buckling of truncated orthotropic conical shells with generalized elastic edge restraint

A theoretical investigation has been made of the flutter, vibration, and buckling of truncated conical shells with generalized elastic edge restraint. The shell analysis is of the classical Donnell type, in-plane inertias and structural damping are neglected, and the aerodynamic loading is represented by the inviscid two-dimensional quasi-steady approximation. An approximate solution is obtained by the generalized Galerkin method. The accuracy and limitations of the analysis are illustrated by comparing numerical results for buckling an vibration with results of other investigations for various boundary conditions, applied loads, and shell geometries and stiffness. Sufficient numerical results are presented to permit the determination of the flutter condition for simply supported isotropic conical shells for a wide range of cone angle, length-radius ration, and radius-thickness ratio. Results are also presented to indicate some effects of variations in edge restraint, applied loads, and ring or stringer stiffening.

Flutter↗

NASA NTRS1980

Transonic flow past swept wings

FLO-22 computer program aids in numerical analysis of transonic potential flow past lifting, swept wing. FLO-22 uses relaxation method to solve finite-difference approximation of full-potential equation for transonic flow past configuration consisting of wing or arbitrary planform and dihedral extending from symmetry plane or wall. Comparisons of FLO-22 calculated results with experimental data for both conventional and super-critical transport wings show good agreement.

Caughey, D. A.↗

NASA NTRS1984

Discrete approximation methods for parameter identification in delay systems

Approximation schemes for parameter identification problems in which the governing state equation is a linear functional differential equation of retarded type are constructed. The basis of the schemes is the replacement of the parameter identification problem having an infinite dimensional state equation by a sequence of approximating parameter identification problems in which the states are given by finite dimensional discrete difference equations. The difference equations are constructed using linear semigroup theory and rational function approximations to the exponential. Sufficient conditions are given for the convergence of solutions to the approximating problems, which can be obtained using conventional methods, to solutions to the original parameter identification problem. Finite difference and spline based schemes using Paderational function approximations to the exponential are constructed, and shown to satisfy the sufficient conditions for convergence. A discussion and analysis of numerical results obtained through the application of the schemes to several examples is included.

Rosen, I. G.↗

NASA NTRS1990

Generalized Transition Finite-Boundary Elements for high speed flight structures

A new class of 'Generalized Transition Finite-Boundary Elements' formulation is presented to predict temperature and/or stress distribution of flight structures at high speeds. A tweleve-noded three-dimensional transition element and a variable degree of freedom eight-noded element are formulated. These elements are incorporated into the formulation of the heat transfer and structural analysis problems by utilizing a newly introduced 'material approximation functions' concept. Results obtained from limited examples compared with the solutions from analytical and other finite element analysis solution. Numerical examples presented illustrate the effectiveness of these elements.

Sarigul-Klijn, Nesrin↗

NASA NTRS1994

Multi-dimensional combustor flowfield analyses in gas-gas rocket engine

The objectives of the present research are to improve design capabilities for low thrust rocket engines through understanding of the detailed mixing and combustions processes. Of particular interest is a small gaseous hydrogen-oxygen thruster which is considered as a coordinated part of an on-going experimental program at NASA LeRC. Detailed computational modeling requires the application of the full three-dimensional Navier Stokes equations, coupled with species diffusion equations. The numerical procedure is performed on both time-marching and time-accurate algorithms and using an LU approximate factorization in time, flux split upwinding differencing in space. The emphasis in this paper is focused on using numerical analysis to understand detailed combustor flowfields, including the shear layer dynamics created between fuel film cooling and the core gas in the vicinity on the nearby combustor wall; the integrity and effectiveness of the coolant film; three-dimensional fuel jets injection/mixing/combustion characteristics; and their impacts on global engine performance.

Tsuei, Hsin-Hua↗

NASA NTRS2022

Astrodynamics Convention and Modeling Reference for Lunar, Cislunar, and Libration Point Orbits

The purpose and direction of this document is to provide U.S. government agencies, specifically National Aeronautics and Space Administration (NASA) and Department of Defense (DoD) space related centers, with a foundational summary of astrodynamics concepts for trajectory design, navigation, and operations in the cislunar, lunar, and libration point regions. This document is provided in response to an Interagency Agreement (IAA) between NASA and the National Geospatial-Intelligence Agency (NGA). With applications to these regions of the Earth-Moon system, this document summarizes: the definitions of standard and unique coordinate systems for Positioning, Navigation, Timing and targeting (PNT), transformations between those coordinate frames, definitions of common time systems, a description of numerical integration, description of a widely-used and approximate dynamical model of a three-body system for preliminary analysis and nomenclature definition, description of higher-fidelity models of cislunar space, and the application of these concepts to sample scenarios with a focus on common steps in trajectory and maneuver design for a spacecraft in cislunar space. This information is critical to mission design and navigation far above the geosynchronous orbit region, where lunar perturbations are required to be modeled accurately and consistently but render trajectory design and analysis a complex procedure. Software tools such as the Goddard Space Flight Center (GSFC) open source General Mission Analysis Tool (GMAT) is used as a reference, along with a wide variety of resources constructed by NASA and other government agencies, academia, and industry, for mathematical specifications and practical considerations. This document has been prepared by and under the auspices of NASA. The GSFC Mission Engineering and Systems Analysis (MESA) Division (Code 590) and the Navigation and Mission Design Branch (Code 595) are part of NASA. Their engineers and scientists have expertise in lunar, cislunar, and libration point region trajectory guidance and navigation and timing. NASA GSFC has supported many successful lunar and cislunar missions over the past several decades. These missions include the Lunar Reconnaissance Orbiter (LRO), the two Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon’s Interaction with the Sun (ARTEMIS) spacecraft, Transiting Exoplanet Survey Satellite (TESS), Lunar Prospector, Lunar Crater Observation and Sensing Satellite (LCROSS), Clementine, and several Sun-Earth libration point missions such as WIND and Deep Space Climate Observatory (DSCOVR), dating back four decades. NASA GSFC also supports the upcoming Gateway lunar mission, the Artemis Lunar Program and Human Landing Systems, and leads both the Lunar IceCube low thrust mission and concept design for the Lunar Communication Relay and Navigation System (LCRNS).

Lunar, CisLunar, Libration, trajectory dynamics, p↗

NASA NTRS2005

Tools for Designing and Analyzing Structures

Structural Design and Analysis Toolset is a collection of approximately 26 Microsoft Excel spreadsheet programs, each of which performs calculations within a different subdiscipline of structural design and analysis. These programs present input and output data in user-friendly, menu-driven formats. Although these programs cannot solve complex cases like those treated by larger finite element codes, these programs do yield quick solutions to numerous common problems more rapidly than the finite element codes, thereby making it possible to quickly perform multiple preliminary analyses - e.g., to establish approximate limits prior to detailed analyses by the larger finite element codes. These programs perform different types of calculations, as follows: 1. determination of geometric properties for a variety of standard structural components; 2. analysis of static, vibrational, and thermal- gradient loads and deflections in certain structures (mostly beams and, in the case of thermal-gradients, mirrors); 3. kinetic energies of fans; 4. detailed analysis of stress and buckling in beams, plates, columns, and a variety of shell structures; and 5. temperature dependent properties of materials, including figures of merit that characterize strength, stiffness, and deformation response to thermal gradients

Luz, Paul L.↗