Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Near-complete extraction of maximum stored energy from large-core fibers using coherent pulse stacking amplification of femtosecond pulses

High field science relies on ultrashort pulse lasers with multi-joule pulse energies for studying light–matter interactions under extreme conditions and for driving particle accelerators and secondary radiation sources of x rays, gamma rays, neutrons, positrons, muons, and protons. Next-generation laser drivers will require a 10 3 -10 4 times increase in pulse repetition rates, producing multi-joule energies at multi-kilowatt average powers to enable practical applications in nuclear engineering, advanced materials, medicine, biology, homeland security, and high-energy physics. Spatially coherently combined femtosecond fiber lasers are recognized as a pathway to these next-generation drivers, with significant practical advantages including high efficiency and the possibility of compact integration. However, chirped pulse amplification in fibers is capable of extracting only a small fraction (usually ~1%) of the maximum stored energy. Here we demonstrate near-complete maximum stored energy extraction with low accumulated nonlinearity from a large-core fiber amplifier using coherent pulse stacking amplification. We have amplified a 81-pulse stacking burst in a 85 µm core chirally coupled core Yb-doped fiber, extracting up to 9.5 mJ (~90% of stored energy) with < 4.5 radians of accumulated nonlinear phase, temporally combined this burst into a single pulse, and achieved 4.2 mJ pulses of 313 fs bandwidth-limited duration after compression. This represents, to our knowledge, the highest energy extracted and compressed into a femtosecond pulse from a single fiber amplifier, enabling approximately two orders of magnitude size reduction of future high-energy coherently spatially combined fiber laser arrays.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

MontePy: a Python library for reading, editing, and writing MCNP input files.

The Monte Carlo N-Particle (MCNP) radiation transport code is a highly capable and accurate code with a long legacy. MCNP uses the Monte Carlo simulation process to simulate the path of particles (e.g., neutrons, photons, charged particles, etc.), and their interaction with materials. It is widely used in nuclear engineering, high-energy physics, and other fields. Its origins in the mid-twentieth century predate many modern software conventions. MCNP users provide an input file to MCNP, which it then uses to create an internal representation of the simulation problem. These input files originally had to be stored as punchcard decks, and the user manual still uses the terminology of cards and decks, despite moving beyond punchcards. MCNP predates nearly all modern human readable markup or data serialization languages, such as the extensible Markup Language (XML), the Standard Generalized Markup Language (SGML), YAML (YAML Ain’t Markup Language), and Javascript Object Notation (JSON). Due to this, MCNP uses an entirely custom defined syntax language for its input, making off-the-shelf libraries for XML, YAML, and JSON impossible to use for scripting various operations on MCNP input files (Kulesza et al., 2022).

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Improved Axisymmetric and High Temperature Material Structural Modeling in MOOSE and NEML

This report describes improvements made to the solid mechanics formulation in the MOOSE open source finite element simulation environment and the open source Nuclear Engineering Material model Library (NEML) for mechanical constitutive models. The focus of these improvements is to improve the usability and performance of simulations involving one or both pieces of software. Specifically, this work completes a new system for solid mechanics simulations in the MOOSE ecosystem providing exact linearizations and optimal (quadratic) convergence, for a variety of coordinate systems and material types, including large deformation simulations. This work then provides users a framework to build highly efficient mechanical simulations of structures or materials or to couple in additional MOOSE physics modules to build complex, scalable multiphysics simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling Tungsten Boride Neutronics in ORIGEN for Z-Facility

ORIGEN is one of the main transmutation software packages used in nuclear engineering Modeling Tungsten Boride Neutronics in ORIGEN for Z-Facilityproblems. For the case of this study, tungsten borides are studied using a coupled framework between MCNP and the ORIGEN package of scale. The input used four compositions of tungsten boride: WB with natural boron- 10 abundance, WB with 80wt% B-10 per isotope of boron, WB4 with natural boron-10 abundance, and WB4 with 80wt% B-10 per isotope of boron. Isotopic inventories were produced for WB which show the time dependent change up to 2 years after a 6-Month irradiation. This will allow for further studies of the materials to assess things material composition changes, dose contribution, and waste management requirements.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A probabilistic inverse prediction method for predicting plutonium processing conditions

In the past decade, nuclear chemists and physicists have been conducting studies to investigate the signatures associated with the production of special nuclear material (SNM). In particular, these studies aim to determine how various processing parameters impact the physical, chemical, and morphological properties of the resulting special nuclear material. By better understanding how these properties relate to the processing parameters, scientists can better contribute to nuclear forensics investigations by quantifying their results and ultimately shortening the forensic timeline. This paper aims to statistically analyze and quantify the relationships that exist between the processing conditions used in these experiments and the various properties of the nuclear end-product by invoking inverse methods. In particular, these methods make use of Bayesian Adaptive Spline Surface models in conjunction with Bayesian model calibration techniques to probabilistically determine processing conditions as an inverse function of morphological characteristics. Not only does the model presented in this paper allow for providing point estimates of a sample of special nuclear material, but it also incorporates uncertainty into these predictions. This model proves sufficient for predicting processing conditions within a standard deviation of the observed processing conditions, on average, provides a solid foundation for future work in predicting processing conditions of particles of special nuclear material using only their observed morphological characteristics, and is generalizable to the field of chemometrics for applicability across different materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Inverse prediction of PuO2 processing conditions using Bayesian seemingly unrelated regression with functional data

Over the past decade, a variety of innovative methodologies have been developed to better characterize the relationships between processing conditions and the physical, morphological, and chemical features of special nuclear material (SNM). Different processing conditions generate SNM products with different features, which are known as “signatures” because they are indicative of the processing conditions used to produce the material. These signatures can potentially allow a forensic analyst to determine which processes were used to produce the SNM and make inferences about where the material originated. This article investigates a statistical technique for relating processing conditions to the morphological features of PuO 2 particles. We develop a Bayesian implementation of seemingly unrelated regression (SUR) to inverse-predict unknown PuO 2 processing conditions from known PuO 2 features. Model results from simulated data demonstrate the usefulness of the technique. Applied to empirical data from a bench-scale experiment specifically designed with inverse prediction in mind, our model successfully predicts nitric acid concentration, while results for Pu concentration and precipitation temperature were equivalent to a simple mean model. Our technique compliments other recent methodologies developed for forensic analysis of nuclear material and can be generalized across the field of chemometrics for application to other materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Multiphysics Simulation of the NASA SIRIUS-CAL Fuel Experiment in the Transient Test Reactor Using Griffin

After approximately 50 years, NASA is restarting efforts to develop nuclear thermal propulsion (NTP) for interplanetary missions. Building upon nuclear engine tests performed from the late 1950s to the early 1970s, the present research and testing focuses on advanced materials and fabrication methods. A number of transient tests have been performed to evaluate materials performance under high-temperature, high-flux conditions, with several more experiments in the pipeline for future testing. The measured data obtained from those tests are being used to validate the Griffin reactor multiphysics code for this particular type of application. Griffin was developed at Idaho National Laboratory (INL) using the MOOSE framework. This article describes the simulation results of the SIRIUS-CAL calibration experiment in the Transient Reactor Test Facility (TREAT). SIRIUS-CAL was the first transient test conducted on NASA fuels, and although the test was performed with a relatively low core peak power, the test specimen survived a temperature exceeding 900 K. Griffin simulations of the experiment successfully matched the reactor’s power transient after calibrating the initial control rod position to match the initial reactor period. The thermal-hydraulics model largely matches the time-dependent response of a thermocouple located within the experiment specimen to within the uncertainty estimate. However, the uncertainty range is significant and must be reduced in the future.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

An Experimental Investigation of Students’ Learning Effects When Using a Simplified Nuclear Simulator

Securing enough data has been a main challenge in human reliability analysis (HRA). Many researchers and institutes have made a lot of efforts for collecting HRA data to produce reasonable human error probabilities (HEPs) as well as reduce the uncertainty of HRA quantification. Representatively, U.S. Nuclear Regulatory Commission (U.S. NRC), Korea Atomic Energy Research Institute (KAERI) and Idaho National Laboratory (INL) have led lots of empirical research regarding the HRA data collection. The U.S. NRC and KAERI have mainly carried out full-scope simulator research collecting HRA data through experiments using full-scope simulators with actual operators. In contrast, INL has experimentally collected the data using simplified simulators and student operators. INL has proposed the Simplified Human Error Experimental Program (SHEEP) framework to complement full-scope data collection efforts by suggesting a way to infer full-scope data based on experimental data collected from students operating simplified simulators, specifically the Rancor Microworld Simulator (Rancor) and the Compact Nuclear Simulator (CNS). The aim of the SHEEP framework is to lower the entry point for collecting useful HRA data by securing large sample sizes at a reasonable amount of cost and labor while also guaranteeing a high degree of freedom when designing experiments. The authors’ previous research investigated whether data collected from the SHEEP framework could support a representative full-scope study. Besides, human performance differences between professional and student operators when using Rancor and CNS have been analyzed to understand the lack of fidelity of the simplified simulators and student operators within the SHEEP study. As a follow up research, this study experimentally investigates students’ learning effects and the performance trends over a certain period when using Rancor. This study aims to find out 1) how much training or education is required to collect HRA data from non-experts (i.e., students) when using Rancor and 2) how much differences there are in human performance measures between students and professional operators. In this study, a longitudinal experiment is developed. The four experiment trials with two weeks interval are carried out for sixteen undergraduate students majoring nuclear engineering at Chosun University. Totally four scenarios randomly selected from ten Rancor scenarios are used in each experiment trial. Four human performance measurements (i.e., workload, situation awareness, time and error) are considered in the experiment. Lastly, the trend of students’ performance is compared with operator data having been collected from the previous experiment.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Proceedings of the international conference on physics of reactors - Physor 2022

The theme for this year's conference is 'Making Virtual a Reality: Advancements in Reactor Physics to Leap Forward Reactor Operation and Deployment'. As we leap forward to the future of nuclear technology, micro-reactors, small modular reactors, advanced reactors, and high energy LWR fuel are at the forefront of the topics.The Physor 2022 will cover a broad range of topics in thirty standard and special sessions tracks, and ten panel sessions gathering more than 350 papers.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Alchemy: A Model-Based Approach for 2D to 3D Autonomous Nuclear System Design

Engineering design of nuclear power plant (NPP) piping and equipment systems frequently bypasses crucial 2D system planning, instead moving straight to 3D modeling. This often leads to designs that exceed building envelope constraints, forcing expensive and time-consuming redesigns. When 2D modeling is employed, it typically involves labor-intensive manual workflows that convert 2D drawings into 3D models, resulting in inefficiencies and errors across design iterations. These workflows further suffer from poor software interoperability and dependence on proprietary software ecosystems, thereby contributing to schedule delays and cost overruns. This paper presents Alchemy, an autonomous framework that transforms 2D system definitions into Industry Foundation Classes (IFC)-compliant 3D building information models (BIMs) for expediting nuclear facility design at the conceptual preliminary phase. Using a model-based approach, the framework treats the 2D system diagram as the central reference model employed to automatically generate all subsequent outputs, ensuring consistency between the system definition and the resulting physical design. A web-based interface enables engineers to define hierarchical system topologies including associated equipment, geometric properties, and connectivity requirements. A two-phase equipment layout optimization algorithm automatically computes collision-free spatial configurations within predefined building envelopes. An artificial intelligence (AI)-assisted pipe routing module then generates orthogonal, collision-free routing paths, allowing the user to select either an A* search-based method or an Ant Colony Optimization (ACO)-based method. All outputs are authored natively in IFC format, relying on open-source technologies and standardized formats in order to ensure extensibility and eliminate proprietary software dependencies. The proposed framework is validated on two representative pressurized-water reactor (PWR)-based case studies, for which it autonomously generates IFC-compliant 3D models in minutes, drastically reducing workflows that typically require hours of manual effort. The generated model demonstrates topologically correct equipment placement, physically plausible spatial relationships, and collision-free pipe routing consistent with known PWR loop configurations. This work represents a foundational step toward digital engineering for nuclear facility preliminary design, with future ongoing development targeting design code compliance and expanded system complexity.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Lifetime measurements in 102 Mo interpreted in the interacting boson model and the X(5) symmetry

Lifetimes of low-lying excited states in 102 Mo populated in the two-neutron transfer reaction 100 Mo ⁢( 18 O, 16 O)⁢ 102 Mo were measured using the recoil distance Doppler shift method at the IFIN-HH Tandem accelerator. Lifetimes of the $2^+_1$, $0^+_2$, $4^+_1$, $2^+_2$, $2^+_3$, $3^+_1$, $6^+_1$, ($0^+_3$), $4^+_2$, ($3^−_1$), and ($5^−_1$) states were obtained. The deduced electromagnetic transition strengths have been compared to calculations performed in the interacting boson model framework including models representing the U(5) and X(5) symmetries. It is found that 102 Mo lies between the U(5) limit and the X(5) critical point symmetry.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Engineering evaluations of nuclear material storage containers against the packaging requirements at TA-55 (FY22 Rules of Use Report)

A set of obligations in the yearly storage container surveillance program, ensures that a retrospective approach is applied with loaded containers in inventory to confirm compliance with all “users” to ensure nuclear material storage container requirements are being followed. Validation that packaged containers are properly used, within a specific set of container types prescribed “bounding conditions of use,” is based on meeting requirements as identified in operating procedures associated with TA55-DOP-091, TA-55 Nuclear Material Packaging, and PA-RD-01022, Nuclear Material Packaging Requirements. The surveillance plan obligation requires the application of local area nuclear material accountability software or (LANMAS) to produce queries. The data queries are used to assess attributes of containers in storage these investigations are conducted on a bi-annual basis. This rules of use (ROU) compliance process ensures proper usage of storage containers as containment systems and therefore provides effective worker protection. It is structured as a supporting effort by implementing aspects of PA-AP-01207, Nuclear Material Container Safety Management at TA-55.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Charge radii and electromagnetic moments of 214−218 Bi : Exploring the “southern” border of the 𝑍 > 82 octupole-deformation region

The changes in the mean-squared charge radii relative to 209 Bi 126 (𝛿⁢⟨𝑟 2 ⟩ 𝑁,126 ) and the magnetic dipole and electric quadrupole moments in 214−218 Bi have been measured using the in-source resonance-ionization spectroscopy technique at ISOLDE (CERN). Magnetic moments of odd-odd bismuth nuclei have been analyzed by the additivity relation. Previous tentative spin-parity and configuration assignments based on the 𝛽-decay feeding patterns have been supported. A normal odd-even staggering in charge radii of bismuth isotopes with 𝑁>126 has been observed. The new data for the 𝛿⁡⟨𝑟 2 ⟩ of bismuth isotopes allow a study of the isotonic dependencies in the charge radii, revealing jumps in 𝛿⁢⟨𝑟 2 ⟩ 132,126 and 𝛿⁢⟨𝑟 2 ⟩ 134,126 at 𝑍 = 84. This pattern could be explained by a sudden onset of octupole deformation at 𝑁 = 132 and 134 when going from polonium (𝑍 = 84) to astatine (𝑍 = 85).

fundamental symmetries↗