Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “neural generative models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

1D Modeling for the Development of a Digital Twin for Hydropower Systems with Applications for a Testing Rig

Modeling and simulation constitute two important parts in constructing a sensible digital twin to mimic the dynamics of hydropower systems. Because of the physical nature of a hydropower system, the basic modeling should cover the water flow systems from the reservoir to the penstock (inlet water pipes), penstock to hydro turbine, and hydro turbine to generator and from the linkage of the hydropower systems to the grid. This report describes initial attempts to model these dynamic components, including the formulation of the linearized state space model for hydro turbine systems using the well-known six-coefficients linearization method and the formulation of the voltage and power dynamical models of a synchronous generator. To validate the accuracy of the proposed model, data collected from Norwegian University of Science and Technology were used to obtain relevant parameters for the model, and the desired simulation results were obtained. Additionally, neural network modeling and learning were also developed and applied to model the generation torque and water flow rate subsystems to demonstrate a potential learning scheme, which can be used in the development of a digital twin.

13 HYDRO ENERGY↗
DOE OSTI2025

Demonstrate new plasticity models for doped UO 2 that capture dislocation mechanisms

In light water reactors, fuel vendors are investigating the use of dopants to modify the properties of UO 2 pellets, with the goal of improving pellet-cladding mechanical interactions during operation. Dopants are expected to ‘soften’ the pellets; that is, the doped pellets have higher plastic deformation than conventional UO 2 . This leads to a reduction in the severity of mechanical pellet-cladding interactions, helping to reduce the hoop strain on the cladding. By minimizing the strain exerted by the pellet on the cladding, it is anticipated that cladding performance under accident conditions can be enhanced (i.e., lowering the risk of burst during a LOCA). Dopants such as chromium (Cr) promote grain growth during pellet fabrication, leading to larger grains; therefore, understanding the link between chemistry, microstructure and mechanical deformation (enhanced creep rates) behavior of UO 2 is critical to helping operators further substantiate the benefits of doping UO 2 . Historically, the nuclear energy industry has relied on empirical models to make assessments of performance. Compared to empirical models, mechanistic physics-based models provide benefits, such as, fewer data points for validation and better extrapolation where experimental data is scarce or non-existent. In this report, Bayesian inference techniques have been applied to a previously developed lower length-scale-informed diffusional creep model. The objective is to i) infer lower-length-scale parameter distributions from available experiment and then ii) determine the uncertainties in the measurable quantity (in this case creep rates) after propagating the inferred lower length scale parameter uncertainties. The approach requires many evaluations of the model, which becomes computationally insurmountable; therefore, a neural-network model is trained to data obtained by sampling the full model over the most important parameters. This neural-network is then used in the Bayesian inference approach to determine probability distributions in the parameter values that represent the uncertainty in the model given what is known from the experiments (posterior). A significant reduction compared to conservative initial (prior) uncertainties is achieved through inference against the experimental data, demonstrating the efficacy of this approach. Furthermore, by accounting for uncertainties in the experimental conditions and sample non-stoichiometry, it is possible to resolve apparent discrepancies in experimental measurements within a self-consistent grain boundary (Coble) creep model that is sensitive to chemistry. This work has been written up and submitted to Nuclear Technology for a special issue on accelerated fuel qualification (AFQ). This uncertainty quantification (UQ) work not only improves the diffusional model, while accounting for uncertainty, but also establishes a framework which can readily be applied to the mechanistic models of dislocation deformation developed in this study. The most likely values from the Bayesian analysis are incorporated into our UO 2 diffusional creep model and a lower length scale-informed irradiation UO 2 creep mechanistic model to generate a dataset. This dataset has been provided to our INL collaborators for training an artificial neural network surrogate model, which will be implemented in the BISON fuel performance code to assess how the results differ from those currently obtained using a fully empirical model and that of using the nominal (uncalibrated) atomic scale parameters in our mechanistic model. Plastic deformation (creep and glide) in UO 2 is a complex phenomenon, governed by multiple underlying processes such as local defect concentrations, applied stresses, and microstructural characteristics. Consequently, there is a need for a meso-scale model with polycrystalline resolution capable of extrapolating to large grain sizes applicable to doped UO 2 , where data is limited and the model can help bridge the knowledge gap. By integrating atomistic data into the polycrystal LApx code, it becomes possible to predict dislocation climb and glide plasticity that simple analytical models cannot accurately represent. The application of atomic-scale data within LApx demonstrated the importance of climb and glide mechanisms in reproducing high-stress UO 2 behavior. Behaviors such as this are crucial to capture and implement in BISON, as parts of the fuel pellet can reach temperatures where glide can occur before pellet cracking. This model which captures dislocation based mechanisms for UO 2 is then used to stand up the doped model accounting for larger grain sizes. It was found that larger grain sizes can lead to enhanced deformation rates in the glide regime, and therefore can help with the pellet cladding mechanical interaction. Therefore if the fuel pellet reaches conditions (stress/temperature) where glide is active, the enhanced creep rates for larger grains in the glide regime (doped UO 2 ) can help with pellet cladding mechanical interactions. Plastic deformation in UO 2 involves multiple mechanisms, including diffusional creep, dislocation climb, and glide. This milestone contains two parts: (1) UQ of a pre-existing lower length scale informed mechanistic diffusional creep model, and (2) development of a new LApx based model for dislocation-mediated creep mechanisms in UO 2 , with application to large-grain doped UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Automated Generation of Integrated Digital and Spiking Neuromorphic Machine Learning Accelerators

The growing numbers of application areas for artificial intelligence (AI) methods have led to an explosion of domain-specific accelerators that could support every new machine learning (ML) algorithm advancement, clearly highlighting the need for a capability to quickly and automatically transition from algorithm definition to hardware implementation and explore design space along a variety of SWaP (size, weight and Power). The software defined architectures (SODA) synthesizer implements a compiler-based modular infrastructure for the end-to-end generation of machine learning accelerators from high-level frameworks to hardware description language. At the same time, neuromorphic computing, by mimicking how the brain operates, promises to perform artificial intelligence tasks at efficiencies orders of magnitude higher than the current conventional tensor-processing based accelerators, as demonstrated by a variety of specialized designs leveraging Spiking Neural Networks (SNNs). Nevertheless, the mapping of an artificial neural network (ANN) to solutions supporting SNNs is still a non-trivial and very device-specific task, and completely lack the possibility to design hybrid systems that integrate conventional and spiking neural models. In this paper we discuss the support for such an integrated generation leveraging the SODA Synthesizer framework and its modular structure. In particular, we present a new MLIR dialect (part of the SODA frontend) that allows expressing spiking neural network features (e.g., available resources, spiking sequences, analog signal reading, etc.) and illustrate how it enables mapping to Spiking Neurons and deployment to the related specialized hardware (which, in the digital domain, could be generated through the other existing layers of the SODA Synthesizer). We then discuss the opportunities for even deeper integration afforded by the hardware compilation infrastructure, providing a path towards the generation of complex heterogeneous artificial intelligence systems.

Curzel, Serena↗
DOE OSTI2023

Learning macroscopic internal variables and history dependence from microscopic models

This paper concerns the study of history dependent phenomena in heterogeneous materials in a two-scale setting where the material is specified at a fine microscopic scale of heterogeneities that is much smaller than the coarse macroscopic scale of application. Here, we specifically study a polycrystalline medium where each grain is governed by crystal plasticity while the solid is subjected to macroscopic dynamic loads. The theory of homogenization allows us to solve the macroscale problem directly with a constitutive relation that is defined implicitly by the solution of the microscale problem. However, the homogenization leads to a highly complex history dependence at the macroscale, one that can be quite different from that at the microscale. In this paper, we examine the use of machine-learning, and especially deep neural networks, to harness data generated by repeatedly solving the finer scale model to: (i) gain insights into the history dependence and the macroscopic internal variables that govern the overall response; and (ii) to create a computationally efficient surrogate of its solution operator, that can directly be used at the coarser scale with no further modeling. We do so by introducing a recurrent neural operator (RNO), and show that: (i) the architecture and the learned internal variables can provide insight into the physics of the macroscopic problem; and (ii) that the RNO can provide multiscale, specifically FE 2 , accuracy at a cost comparable to a conventional empirical constitutive relation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Predictive understanding of the surface tension and velocity of sound in ionic liquids using machine learning

Knowledge of the physical properties of ionic liquids (ILs), such as the surface tension and speed of sound, is important for both industrial and research applications. Unfortunately, technical challenges and costs limit exhaustive experimental screening efforts of ILs for these critical properties. Previous work has demonstrated that the use of quantum-mechanics-based thermochemical property prediction tools, such as the conductor-like screening model for real solvents, when combined with machine learning (ML) approaches, may provide an alternative pathway to guide the rapid screening and design of ILs for desired physiochemical properties. However, the question of which machine-learning approaches are most appropriate remains. In the present study, we examine how different ML architectures, ranging from tree-based approaches to feed-forward artificial neural networks, perform in generating nonlinear multivariate quantitative structure–property relationship models for the prediction of the temperature- and pressure-dependent surface tension of and speed of sound in ILs over a wide range of surface tensions (16.9–76.2 mN/m) and speeds of sound (1009.7–1992 m/s). The ML models are further interrogated using the powerful interpretation method, shapley additive explanations. We find that several different ML models provide high accuracy, according to traditional statistical metrics. The decision tree-based approaches appear to be the most accurate and precise, with extreme gradient-boosting trees and gradient-boosting trees being the best performers. However, our results also indicate that the promise of using machine-learning to gain deep insights into the underlying physics driving structure–property relationships in ILs may still be somewhat premature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

WPGNN and PLayGen (Wind Plant Graph Neural Network and Plant Layout Generator) [SWR-21-90]

WPGNN is the graph neural network machine learning based surrogate model and software that provides a streamlined approximation of wind plant wake models. It can rapidly estimate the energy production of the plant and turbines for any arbitrarily sized wind plant and layout under any inflow condition. Associated tools include graphing and visualization capabilities as well as a wind plant generator capable of creating randomized realizations of canonical wind plant layouts. The WPGNN architecture and application is extendable to multiple wake models, turbine technologies and features, and supports downstream optimizations of wind plant layouts and control strategies. In addition to the WPGNN, we include the code for the plant layout generator (PLayGen) playgen.py. This generator can produce random realizations of realistic wind plant layouts from one of the four canonical styles: cluster, single string, multiple string, or parallel string. The PLayGen_demo.ipynb notebook provides a demonstration of how to use the generator tool.

Harrison-Atlas, Dylan↗
DOE OSTI2020

Super resolution for root imaging

Premise High‐resolution cameras are very helpful for plant phenotyping as their images enable tasks such as target vs. background discrimination and the measurement and analysis of fine above‐ground plant attributes. However, the acquisition of high‐resolution images of plant roots is more challenging than above‐ground data collection. An effective super‐resolution (SR) algorithm is therefore needed for overcoming the resolution limitations of sensors, reducing storage space requirements, and boosting the performance of subsequent analyses. Methods We propose an SR framework for enhancing images of plant roots using convolutional neural networks. We compare three alternatives for training the SR model: (i) training with non‐plant‐root images, (ii) training with plant‐root images, and (iii) pretraining the model with non‐plant‐root images and fine‐tuning with plant‐root images. The architectures of the SR models were based on two state‐of‐the‐art deep learning approaches: a fast SR convolutional neural network and an SR generative adversarial network. Results In our experiments, we observed that the SR models improved the quality of low‐resolution images of plant roots in an unseen data set in terms of the signal‐to‐noise ratio. We used a collection of publicly available data sets to demonstrate that the SR models outperform the basic bicubic interpolation, even when trained with non‐root data sets. Discussion The incorporation of a deep learning–based SR model in the imaging process enhances the quality of low‐resolution images of plant roots. We demonstrate that SR preprocessing boosts the performance of a machine learning system trained to separate plant roots from their background. Our segmentation experiments also show that high performance on this task can be achieved independently of the signal‐to‐noise ratio. We therefore conclude that the quality of the image enhancement depends on the desired application.

Ruiz‐Munoz, Jose F.↗
DOE OSTI2022

Coarse-grained molecular dynamics integrated with convolutional neural network for comparing shapes of temperature sensitive bottlebrushes

Quantification of shape changes in nature-inspired soft material architectures of stimuli-sensitive polymers is critical for controlling their properties but is challenging due to their softness and flexibility. Here, we have computationally designed uniquely shaped bottlebrushes of a thermosensitive polymer, poly(N-isopropylacrylamide) (PNIPAM), by controlling the length of side chains along the backbone. Coarse-grained molecular dynamics simulations of solvated bottlebrushes were performed below and above the lower critical solution temperature of PNIPAM. Conventional analyses (free volume, asphericity, etc.) show that lengths of side chains and their immediate environments dictate the compactness and bending in these architectures. We further developed 100 unique convolutional neural network models that captured molecular-level features and generated a statistically significant quantification of the similarity between different shapes. Thus, our study provides insights into the shapes of complex architectures as well as a general method to analyze them. The shapes presented here may inspire the synthesis of new bottlebrushes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Deep learning symmetries and their Lie groups, algebras, and subalgebras from first principles

Abstract We design a deep-learning algorithm for the discovery and identification of the continuous group of symmetries present in a labeled dataset. We use fully connected neural networks to model the symmetry transformations and the corresponding generators. The constructed loss functions ensure that the applied transformations are symmetries and the corresponding set of generators forms a closed (sub)algebra. Our procedure is validated with several examples illustrating different types of conserved quantities preserved by symmetry. In the process of deriving the full set of symmetries, we analyze the complete subgroup structure of the rotation groups SO (2), SO (3), and SO (4), and of the Lorentz group S O ( 1 , 3 ) . Other examples include squeeze mapping, piecewise discontinuous labels, and SO (10), demonstrating that our method is completely general, with many possible applications in physics and data science. Our study also opens the door for using a machine learning approach in the mathematical study of Lie groups and their properties.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Auto-HPCnet: An Automatic Framework to Build Neural Network-based Surrogate for High-Performance Computing Applications

High-performance computing communities are increasingly adopt- ing Neural Networks (NN) as surrogate models in their applications to generate scientific insights. Replacing an execution phase in the application with NN models can bring significant performance im- provement. However, there is a lack of tools that can help domain scientists automatically apply NN-based surrogate models to HPC applications. We introduce a framework, named Auto-HPCnet, to democratize the usage of NN-based surrogates. Auto-HPCnet is the first end-to-end framework that makes past proposals for the NN-based surrogate model practical and disciplined. Auto-HPCnet introduces a workflow to address unique challenges when apply- ing the approximation, such as feature acquisition and meeting the application-specific constraint on the quality of final computation outcome. We show that Auto-HPCnet can leverage NN for a set of HPC applications and achieve 5.50× speedup on average (up to 16.8× speedup and with data preparation cost included) while meeting the application-specific constraint on the final computation quality.

Dong, Wenqian↗
DOE OSTI2023

Visualizing Uranium Crystallization from Melt: Experiment-Informed Phase Field Modeling and Machine Learning

The focus of this project was to observe and simulate the solidification of uranium metal at the crystallographic level from its molten state. Melting experiments were conducted at two different scales to observe microstructural evolution using either a laboratory-scale induction furnace (hundreds of grams of metal) or a microscope heating stage (hundreds of milligrams of metal), respectively. Experimental parameters and characterization data were then used to inform a phase field model of gamma-U crystal growth as dendrites with or without secondary phase impurities in the form of uranium carbide particles. Finally, training datasets were generated by the phase field model as inputs to a neural network, developed with the aim of providing a faster, cheaper surrogate model for microstructural simulations within a given parameter space. Progress is reported herein for each of these task areas. Ultimately, 1) an optical microscope heating stage capability has been stood-up for uranium metal solidification studies, 2) a phase field model was advanced to simulate multiple uranium grains growing in the presence of carbide impurity particles and 3) a neural network was constructed and optimized to predict the microstructure features of individually growing uranium crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydroboost

HydroBoost is the most realistic revenue optimization tool for the hybridization of hydropower and battery energy storage systems to date. The innovative representation of how operators actually schedule hydropower in practice results in more realistic predictions of revenue and operations. Unlike other optimization tools, HydroBoost generates forecast energy prices with uncertainty to use in the optimization. This allows HydroBoost to give users a range of potential revenue with an upper bound using the perfect foresight pricing and a lower bound using a naive persistence forecast model. Additional forecast can be generated and used in the optimization, such as additive models, random forest, and neural networks to give further insight into potential revenue. HydroBoost has been designed to be applicable for both run-of-river and reservoir storage sites. The primary focus is on the day-ahead market and requires year-long data with an hour time-step. All time-series input and constraints are contained in an Excel worksheet for convince. The user will run the forecasting generation first with a Python script to give the optimization model the necessary requirements. Next the optimization is ran using Julia and results are generated and stored into a directory as csv files. HydroBoost includes an additional module to generate figures based on the results of the optimization simulation. The results help analyze the results and users to draw insights into how the hydro and battery systems are operated and the revenue each is producing. Additionally, the difference between the perfect foresight model and models that include forecast can easily be inspected.

Phillips, TylerB. [Idaho National Laboratory (INL)↗
DOE OSTI2021

NEURAL NETWORK FOR COHERENT DIFFRACTION IMAGE INVERSION

A deep neural network model plus automatic differentiation is developed for retrieving phase information from 3D coherent diffraction images. The model is implemented using Tensorflow and the training dataset is generated using physics-based atomistic simulations. Custom codes are written to handle the resampling of diffraction images to oversampling ratios appropriate for the neural network model.

CHAN, HENRY↗
DOE OSTI2021

All Optical Neural Networks for Low Power Edge Computing

We developed a simplistic physics-based model of an all-optical neural network that mimics the encoder part of an autoencoder neural network for image compression. Our approach relies on the generation of a MATLAB-based model for both data compression and decompression and utilizes MATLAB's built-in autoencoder networks in combination with simple propagation of optical fields between layers constituting phase elements via Fourier transform. We optimize the phase elements using the particle swarm optimization technique and using our model, we demonstrate a compression ratio of 25% for 2828-pixel input images containing numeric digits from 0 to 9.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Advancing earth system model calibration: a diffusion-based method

Understanding of climate impact on ecosystems globally requires site-specific model calibration. Here we introduce a novel diffusion-based uncertainty quantification (DBUQ) method for efficient model calibration. DBUQ is a score-based diffusion model that leverages Monte Carlo simulation to estimate the score function and evaluates a simple neural network to quickly generate samples for approximating parameter posterior distributions. DBUQ is stable, efficient, and can effectively calibrate the model given diverse observations, thereby enabling rapid and site-specific model calibration on a global scale. This capability significantly advances Earth system modeling and our understanding of climate impacts on Earth systems. We demonstrate DBUQ's capability in E3SM land model calibration at the Missouri Ozark AmeriFlux forest site. Both synthetic and real-data applications indicate that DBUQ produces accurate parameter posterior distributions similar to those generated by Markov Chain Monte Carlo sampling but with 30X less computing time. This efficiency marks a significant stride in model calibration, paving the way for more effective and timely climate impact analyses.

Liu, Yanfang↗
DOE OSTI2021

Machine learning accelerated discrete element modeling of granular flows

Granular flows are widely encountered in many industrial processes and natural phenomena. Discrete Element Modeling (DEM) is a useful tool for understanding and troubleshooting devices, which handle granular materials. However, its applicability is significantly limited by the huge computational cost associated with detecting and computing collisions. In this research, the computation speed of DEM was accelerated by orders of magnitude using a convolutional neural network to replace the direct calculation of particle-particle and particle-boundary collisions. The MFiX software was used to generate the training and testing dataset. Additionally, a GPU accelerated TensorFlow model was used to train the neural network and test the results. The model fluctuations caused by different training steps were reduced with a multi-scale loss function. The accuracy was improved with more frames within one training step. The modeling of a rotating drum and a hopper demonstrated the accuracy and efficiency of this machine learning accelerated DEM in the simulation of granular flows.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Upsampling Monte Carlo Reactor Simulation Tallies in Depleted Sodium-Cooled Fast Reactor Assemblies Using a Convolutional Neural Network

The computational demand of neutron Monte Carlo transport simulations can increase rapidly with the spatial and energy resolution of tallied physical quantities. Convolutional neural networks have been used to increase the resolution of Monte Carlo simulations of light water reactor assemblies while preserving accuracy with negligible additional computational cost. Here, we show that a convolutional neural network can also be used to upsample tally results from Monte Carlo simulations of sodium-cooled fast reactor assemblies, thereby extending the applicability beyond thermal systems. The convolutional neural network model is trained using neutron flux tallies from 300 procedurally generated nuclear reactor assemblies simulated using OpenMC. Validation and test datasets included 16 simulations of procedurally generated assemblies, and a realistic simulation of a European sodium-cooled fast reactor assembly was included in the test dataset. We show the residuals between the high-resolution flux tallies predicted by the neural network and high-resolution Monte Carlo tallies on relative and absolute bases. The network can upsample tallies from simulations of fast reactor assemblies with diverse and heterogeneous materials and geometries by a factor of two in each spatial and energy dimension. The network’s predictions are within the statistical uncertainty of the Monte Carlo tallies in almost all cases. This includes test assemblies for which burnup values and geometric parameters were well outside the ranges of those in assemblies used to train the network.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗