SEARCH · Engineering Papers

Results for “native analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Utilizing remote sensing data for land use decisions for Indian lands in South Dakota.

Evaluation of photographic and thermal infrared imagery acquired at an altitude of 11,500 ft above ground level (in southwestern South Dakota) on Oct. 15, 1970, June 30, 1971, and Aug. 2, 1971, for use in mapping range sites and soils. A density slicing system was used to enhance film optical density differences associated with range sites and soils. The range site boundaries in native rangeland areas were found to be delineated best by a density slicing analysis of color infrared film obtained in August 1971. The range site maps produced by density slicing were superior to existing range inventory maps. The density slicing analysis of color infrared film from the August 1971 flight was best for locating soil boundaries in rangeland areas. To adequately map soils in rangeland areas, data based on density slicing used in conjunction with slope gradient information derived from stereoscopic analyses provided more detailed and accurate information than is presently available from range site and soil maps of the area.

Frazee, C. J.↗

NASA NTRS2016

Characterize Aerosols from MODIS MISR OMI MERRA-2: Dynamic Image Browse Perspective

Among the known atmospheric constituents, aerosols still represent the greatest uncertainty in climate research. To understand the uncertainty is to bring altogether of observational (in-situ and remote sensing) and modeling datasets and inter-compare them synergistically for a wide variety of applications that can bring far-reaching benefits to the science community and the broader society. These benefits can best be achieved if these earth science data (satellite and modeling) are well utilized and interpreted. Unfortunately, this is not always the case, despite the abundance and relative maturity of numerous satellite-borne sensors routinely measure aerosols. There is often disagreement between similar aerosol parameters retrieved from different sensors, leaving users confused as to which sensors to trust for answering important science questions about the distribution, properties, and impacts of aerosols. NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) have developed a new visualization service (NASA Level 2 Data Quality Visualization, DQViz)supporting various visualization and data accessing capabilities from satellite Level 2(MODISMISROMI) and long term assimilated aerosols from NASA Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2 displaying at their own native physical-retrieved spatial resolution. Functionality will include selecting data sources (e.g., multiple parameters under the same measurement), defining area-of-interest and temporal extents, zooming, panning, overlaying, sliding, and data subsetting and reformatting.

data quality↗

DOE OSTI2021

Radiative properties of quantum emitters in boron nitride from excited state calculations and Bayesian analysis

Abstract Point defects in hexagonal boron nitride (hBN) have attracted growing attention as bright single-photon emitters. However, understanding of their atomic structure and radiative properties remains incomplete. Here we study the excited states and radiative lifetimes of over 20 native defects and carbon or oxygen impurities in hBN using ab initio density functional theory and GW plus Bethe-Salpeter equation calculations, generating a large data set of their emission energy, polarization and lifetime. We find a wide variability across quantum emitters, with exciton energies ranging from 0.3 to 4 eV and radiative lifetimes from ns to ms for different defect structures. Through a Bayesian statistical analysis, we identify various high-likelihood charge-neutral defect emitters, among which the native V N N B defect is predicted to possess emission energy and radiative lifetime in agreement with experiments. Our work advances the microscopic understanding of hBN single-photon emitters and introduces a computational framework to characterize and identify quantum emitters in 2D materials.

Chemistry↗

DOE OSTI2024

PlasmoData.jl — A Julia framework for modeling and analyzing complex data as graphs

Datasets encountered in scientific and engineering applications appear in complex formats (e.g., images, multivariate time series, molecules, video, text strings, networks). Graph theory provides a unifying framework to model such datasets and enables the use of powerful tools that can help analyze, visualize, and extract value from data. In this work, we present PlasmoData.jl, an open-source, Julia framework that uses concepts of graph theory to facilitate the modeling and analysis of complex datasets. The core of our framework is a general data modeling abstraction, which we call a DataGraph. We show how the abstraction and software implementation can be used to represent diverse data objects as graphs and to enable the use of tools from topology, graph theory, and machine learning (e.g., graph neural networks) to conduct a variety of tasks. We illustrate the versatility of the framework by using real datasets: (i) an image classification problem using topological data analysis to extract features from the graph model to train machine learning models; (ii) a disease outbreak problem where we model multivariate time series as graphs to detect abnormal events; and (iii) a technology pathway analysis problem where we highlight how we can use graphs to navigate connectivity. Further, our discussion also highlights how PlasmoData.jl leverages native Julia capabilities to enable compact syntax, scalable computations, and interfaces with diverse packages. Overall, we show that the DataGraph abstraction and PlasmoData.jl Julia package are able to model data within graphs and enable useful analysis.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DOE OSTI2026

Feedstock/Pretreatment Screening for Bioconversion of Sugars and Lignin Residues

This project will conduct biomass deconstruction (pretreatment and enzymatic saccharification) on two representative biomass feedstocks and four different pretreatment processes, including three high temperature steam/chemical pretreatments and one low temperature chemical/mechanical pretreatment. A third biomass feedstock will undergo biomass deconstruction with three different pretreatment processes, including two high temperature chemical pretreatments and one low temperature chemical/mechanical pretreatment. Several pretreatment conditions will be performed in a screening study using NLR pilot-scale pretreatment equipment to generate a range of pretreated biomass substrates. A selected number of these substrates will be chosen for enzymatic saccharification evaluation, based on standard compositional analysis of the pretreated substrates as a primary indicator of pretreatment efficacy. Resulting enzymatic hydrolysis slurries will be analyzed to determine overall biomass sugar yields. Additional compositional analysis will be performed to determine oligomeric sugar composition and structure, to analyze structural characteristics of solids fractions on native, pretreated, and enzymatically saccharified biomass residues for one of the biomass feedstocks, corn stover. The enzymatically saccharified materials will undergo 2,3-butanediol fermentation in a shaker flask as bench scale. Using relevant process performance data collected in these various conversion steps, technoeconomic analysis activities will be performed to compare the economic potential of the various biomass feedstock and pretreatment processes and to identify key economic drivers and sustainability metrics.

09 BIOMASS FUELS↗

DOE OSTI2023

Unraveling the convoluted and dynamic interphasial mechanisms on Li metal anode

Accurate understanding of the chemistry of solid-electrolyte interphase (SEI) is key to developing new electrolytes for high-energy batteries using lithium metal (Li-0) anodes(1). SEI is generally believed to be formed by the reactions between Li-0 and electrolyte(2,3). However, our new study shows this is not the whole story. Through synchrotron-based X-ray diffraction and pair distribution function analysis, we reveal a much more convoluted formation mechanism of SEI, which receives considerable contributions from electrolyte, cathode, moisture and native surface species on Li-0, with highly dynamic nature during cycling. Using isotope labelling, we traced the origin of LiH to electrolyte solvent, moisture and a new source: the native surface species (LiOH) on pristine Li-0. When lithium accessibility is very limited as in the case of anode-free cells, LiOH develops into plate-shaped large crystals during cycling. Alternatively, when the lithium source is abundant, as in the case of Li||NMC811 cells, LiOH reacts with Li-0 to form LiH and Li2O. While the desired anion-derived LiF-rich SEI is typically found in the concentrated electrolytes or their derivatives, we found it can also be formed in low-concentration electrolyte via the crosstalk effect, emphasizing the importance of formation cycle protocol and opening up opportunities for low-cost electrolyte development.

Polzin, Bryant J.↗

NASA NTRS2017

Archive Management of NASA Earth Observation Data to Support Cloud Analysis

NASA collects, processes and distributes petabytes of Earth Observation (EO) data from satellites, aircraft, in situ instruments and model output, with an order of magnitude increase expected by 2024. Cloud-based web object storage (WOS) of these data can simplify the execution of such an increase. More importantly, it can also facilitate user analysis of those volumes by making the data available to the massively parallel computing power in the cloud. However, storing EO data in cloud WOS has a ripple effect throughout the NASA archive system with unexpected challenges and opportunities. One challenge is modifying data servicing software (such as Web Coverage Service servers) to access and subset data that are no longer on a directly accessible file system, but rather in cloud WOS. Opportunities include refactoring of the archive software to a cloud-native architecture; virtualizing data products by computing on demand; and reorganizing data to be more analysis-friendly.

Lynnes, Christopher↗

NASA NTRS2017

Archive Management of NASA Earth Observation Data to Support Cloud Analysis

Lynnes, Christopher↗

DOE OSTI2021

Structural Polymorphism of Chitin and Chitosan in Fungal Cell Walls From Solid-State NMR and Principal Component Analysis

Chitin is a major carbohydrate component of the fungal cell wall and a promising target for novel antifungal agents. However, it is technically challenging to characterize the structure of this polymer in native cell walls. Here, we recorded and compared 13 C chemical shifts of chitin using isotopically enriched cells of six Aspergillus, Rhizopus, and Candida strains, with data interpretation assisted by principal component analysis (PCA) and linear discriminant analysis (LDA) methods. The structure of chitin is found to be intrinsically heterogeneous, with peak multiplicity detected in each sample and distinct fingerprints observed across fungal species. Fungal chitin exhibits partial similarity to the model structures of α- and γ-allomorphs; therefore, chitin structure is not significantly affected by interactions with other cell wall components. Addition of antifungal drugs and salts did not significantly perturb the chemical shifts, revealing the structural resistance of chitin to external stress. In addition, the structure of the deacetylated form, chitosan, was found to resemble a relaxed two-fold helix conformation. This study provides high-resolution information on the structure of chitin and chitosan in their cellular contexts. The method is applicable to the analysis of other complex carbohydrates and polymer composites.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2021

Calibration of the SHERLOC Deep Ultraviolet Fluorescence–Raman Spectrometer on the Perseverance Rover

We describe the wavelength calibration of the spectrometer for the scanning of habitable environments with Raman and luminescence for organics and chemicals (SHERLOC) instrument onboard NASA’s Perseverance Rover. SHERLOC utilizes deep ultraviolet Raman and fluorescence (DUV R/F) spectroscopy to enable analysis of samples from the Martian surface. SHERLOC employs a 248.6 nm deep ultraviolet laser to generate Raman-scattered photons and native fluorescence emission photons from near-surface material to detect and classify chemical and mineralogical compositions. The collected photons are focused on a charge-coupled device and the data are returned to Earth for analysis. The compact DUV R/F spectrometer has a spectral range from 249.9 nm to 353.6 nm (200 cm1 to 12, 000 cm1) (with a spectral resolution of 0.296 nm (40 cm1)). The compact spectrometer uses a custom design to project a high-resolution Raman spectrum and a low-resolution fluorescence spectrum on a single charge-coupled device. The natural spectral separation enabled by deep ultraviolet excitation enables wavelength separation of the Raman/fluorescence spectra. The SHERLOC spectrometer was designed to optimize the resolution of the Raman spectral region and the wavelength range of the fluorescence region. The resulting illumination on the charge-coupled device is curved, requiring a segmented, nonlinear wavelength calibration in order to understand the mineralogy and chemistry of Martian materials.

Kyle Uckert↗

DOE OSTI2025

Effects of pH on potassium sulfite based alkali pretreatment of corn stover under mild conditions

Sulfite salt-based alkali pretreatment is increasingly recognized as an effective method for biomass pretreatment under mild temperature conditions. However, the effects of pH on the pretreatment process are not yet fully understood. In this study, the pretreatment of corn stover using potassium sulfite (KS) combined with aqueous ammonia (AA) at 80 °C was investigated within a pH range of 9–14. Results demonstrated that high pH environment established by combining KS with AA is critical for enhancing sulfonation modifications, effectively removing lignin, facilitating deacetylation, and significantly improving the total sugar yield. For example, when comparing KS alone at pH 9.7, AA alone at pH 13, and KS combined with AA at pH 13, the delignification rates were 13.82 %, 67.71 %, and 71.27 %, respectively; the deacetylation rates were 25.84 %, 81.19 %, and 82.54 %, respectively; and the total sugar yields were 24.85 %, 78.96 %, and 92.12 %, respectively. The X-ray photoelectron spectroscopy (XPS) results confirmed that sulfonation reactions occurred under low-temperature and high pH conditions, leading to enhanced delignification efficiency. Results also showed that the cellulase adsorption, water retention, and the enzymatic digestibility of the pretreated solids increased along with rising pH. Moreover, nuclear magnetic resonance (NMR) analysis revealed that KS-based alkali pretreatment retained more β-O-4 native bonds in the pretreated lignin-rich hydrolysate than alkali pretreatment alone did, providing promising opportunities for the subsequent upgrading of lignin into high-value products.

09 BIOMASS FUELS↗

DOE OSTI2025

Discovering methylated DNA motifs in bacterial nanopore sequencing data with MIJAMP

Abstract Bacterial DNA methylation is involved in diverse cellular functions, including modulation of gene expression, DNA repair, and restriction–modification systems for defense against viruses and other foreign DNA. Restriction systems hinder efforts to engineer organisms to produce fuels and chemicals from waste and renewable feedstocks by degrading DNA during transformation. Methylome analysis allows identification of motifs within a bacterial chromosome that may be targeted by native restriction enzymes. Further expression of the corresponding methyltransferases in Escherichia coli allows plasmid DNA to be protected from restriction in the target organism, thereby drastically enhancing transformation efficiency. Nanopore sequencing can detect methylated bases, but software is needed to transform modified base coordinates into methylated motifs. Here, we develop MIJAMP (MIJAMP Is Just A MethylBED Parser), a software package that was developed to discover methylated motifs from the output of ONT’s Modkit or other data in the methylBED format. MIJAMP employs a human-driven refinement strategy that empirically validates all motifs against genome-wide methylation data, thus eliminating incorrect motifs. MIJAMP also reports methylation data on specific, user-defined motifs. Using MIJAMP, we determined the methylated motifs both in a control strain (wild-type E. coli) and in Synecococcus sp. strain PCC7002, laying the foundation for improved transformation in this organism. MIJAMP is available at https://code.ornl.gov/alexander-public/mijamp/. One Sentence Summary: Here we describe software written to discover DNA methylation motifs from nanopore sequencing data.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2011

Incorporating Ameriflux Data into LVT

This paper describes a new generic data reader that was developed in Fortran to handle the Ameriflux data for the LIS Verification Toolkit (LVT). Researchers at the Hydrological Sciences Branch of NASA Goddard Space Flight Center have created a high resolution land surface modeling and data assimilation system known as the Land Information System (LIS), which provides an infrastructure to integrate state-of-the-art land surface models, data assimilation algorithms, observations of land surface from satellite and remotely sensed platforms to provide estimates of land surface conditions such as soil moisture, evaporation, snowpack and runoff. These model predictions are typically evaluated by comparing them with data from observational networks. The observational data; however, are usually available in disparate data formats and require significant effort to process them into a structure amenable for use with the model data. The motivation to develop a uniform approach for land surface verification as a way to alleviate these processing efforts has led to the development of LVT which is designed to enable the rapid evaluation of land surface modeling and analysis products from LIS. LVT focuses on the use of observational datasets in their native format. As the formats of these datasets vary widely, a major part of LVT is creating programs to read and process the native datasets. The primary goal of this project is to enhance LVT capabilities by incorporating observational datasets from Ameriflux

Georgiev, Teodor↗

NASA NTRS2017

Ground System Architectures Workshop GMSEC SERVICES SUITE (GSS): an Agile Development Story

The GMSEC (Goddard Mission Services Evolution Center) Services Suite (GSS) is a collection of tools and software services along with a robust customizable web-based portal that enables the user to capture, monitor, report, and analyze system-wide GMSEC data. Given our plug-and-play architecture and the needs for rapid system development, we opted to follow the Scrum Agile Methodology for software development. Being one of the first few projects to implement the Agile methodology at NASA GSFC, in this presentation we will present our approaches, tools, successes, and challenges in implementing this methodology. The GMSEC architecture provides a scalable, extensible ground and flight system for existing and future missions. GMSEC comes with a robust Application Programming Interface (GMSEC API) and a core set of Java-based GMSEC components that facilitate the development of a GMSEC-based ground system. Over the past few years, we have seen an upbeat in the number of customers who are moving from a native desktop application environment to a web based environment particularly for data monitoring and analysis. We also see a need to provide separation of the business logic from the GUI display for our Java-based components and also to consolidate all the GUI displays into one interface. This combination of separation and consolidation brings immediate value to a GMSEC-based ground system through increased ease of data access via a uniform interface, built-in security measures, centralized configuration management, and ease of feature extensibility.

Software Development/Agile↗

NASA NTRS2017

Investigating Access Performance of Long Time Series with Restructured Big Model Data

Data sets generated by models are substantially increasing in volume, due to increases in spatial and temporal resolution, and the number of output variables. Many users wish to download subsetted data in preferred data formats and structures, as it is getting increasingly difficult to handle the original full-size data files. For example, application research users such as those involved with wind or solar energy, or extreme weather events are likely only interested in daily or hourly model data at a single point (or for a small area) for a long time period, and prefer to have the data downloaded in a single file. With native model file structures, such as hourly data from NASA Modern-Era Retrospective analysis for Research and Applications Version-2 (MERRA-2), it may take over 10 hours for the extraction of parameters-of-interest at a single point for 30 years. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) is exploring methods to address this particular user need. One approach is to create value-added data by reconstructing the data files. Taking MERRA-2 data as an example, we have tested converting hourly data from one-day-per-file into different data cubes, such as one-month, or one-year. Performance is compared for reading local data files and accessing data through interoperable services, such as OPeNDAP. Results show that, compared to the original file structure, the new data cubes offer much better performance for accessing long time series. We have noticed that performance is associated with the cube size and structure, the compression method, and how the data are accessed. An optimized data cube structure will not only improve data access, but also may enable better online analysis services

reanalysis↗

DOE OSTI2025

Engineering of xylose metabolic pathways in Rhodotorula toruloides for sustainable biomanufacturing

Abstract The oleaginous yeast Rhodotorula toruloides is a promising microbial cell factory for the sustainable production of biofuels and value-added chemicals from renewable carbon sources. Unlike the conventional yeast Saccharomyces cerevisiae, R. toruloides can naturally metabolize xylose, the second most abundant sugar in lignocellulosic hydrolysates. However, its native xylose metabolism is inefficient, characterized by slow xylose uptake and accumulation of D-arabitol. Moreover, despite its phenotype, research on the enzymes involved in xylose metabolism has yet to reach a consensus. Therefore, this review provides a comprehensive analysis of the non-canonical xylose metabolism in R. toruloides, focusing on the properties of key enzymes involved in xylose metabolism. Native xylose reductase and xylitol dehydrogenase exhibit broad substrate promiscuity compared to their counterparts in the xylose-fermenting Scheffersomyces stipitis. Additionally, the absence of xylulokinase expression under xylose-utilizing conditions redirects metabolism toward D-arabitol accumulation. Consequently, D-arabitol dehydrogenases and ribulokinase play essential roles in the xylose metabolism of R. toruloides. These findings highlight the fundamental differences between R. toruloides xylose metabolism and the oxidoreductase pathways observed in other xylose-fermenting yeast, providing insights for metabolic engineering strategies to improve xylose utilization and enhance bioconversion of cellulosic hydrolysates to different bioproducts by R. toruloides.

Biotechnology & Applied Microbiology↗

DOE OSTI2020

NEAMS Workbench Status and Capabilities

The mission of the US Department of Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is to develop, apply, deploy, and support state-of-the-art predictive modeling and simulation tools for the design and analysis of current and future nuclear energy systems. This is accomplished by using computing architectures that range from laptops to leadership-class facilities. The NEAMS Workbench is a new initiative that will facilitate the transition from conventional tools to highfidelity tools by providing a common user interface for model creation, review, execution, output review, and visualization for integrated codes. The Workbench can use common user input, including engineering-scale specifications that are expanded into application-specific input requirements through the use of customizable templates. The templating process can enable multifidelity analysis of a system from a common set of input data. Additionally, the common user input processor can provide an enhanced alternative application input that provides additional conveniences compared with native input, especially for legacy codes. Expansion of the integrated codes and application templates available in the Workbench will broaden the NEAMS user community and will facilitate system analysis and design. Current and planned capabilities of the NEAMS Workbench are detailed herein.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Data from: Long-term changes in soil carbon and nitrogen fractions in switchgrass, native grasses, and no-till corn bioenergy production systems

These files contain data from soil and root samples use in this publication. The R script uses this data to perform the statistical analysis used in the publication.

Bioenergy feedstock↗