Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modular construction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Cryogenic electronics for noble liquid neutrino detectors

In this paper we present the general features of cryogenic (or “cold”) electronics for noble liquid time projection chambers, with design principles and details for neutrino physics, a brief history of the technology and details of recent research and development that is driving the design of the detectors under construction. Finally, some comments on future R&D envisioned and the impact of this work on other fields is described. “Cold” in the context of this work applies to CMOS devices operated at 77 K and above, at liquids temperatures of LAr (89 K), LKr (125 K) and LXe (165 K), with most of the tests performed in, or at LN 2 (77 K). Additionally, the paper is concentrated on the design of cold electronics for large liquid argon TPCs, those that have been successfully operated, MicroBooNE and ProtoDUNE, and those designed or under construction, such as SBND and DUNE first and second 10 kton modules. The high performance achieved with MicroBooNE and ProtoDUNE – a high signal-to-noise ratio combined with high stability of response – is mainly due to the integral approach to design and construction of sensing electrodes with cold readout electronics in a modular approach with the cryostat signal feed-throughs incorporating warm interface electronics into a Faraday cage with the cryostat. The integral concept is described in some detail in this paper.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Effects of break geometry and orientation on helium-air mixing in simulated reactor cavities of high temperature gas reactors

Here, this study experimentally examined the spatial and temporal variations in air and helium concentrations and temperature fields within simulated reactor cavities of a High Temperature Gas Reactor (HTGR) following helium discharge into an initially air-filled reactor cavity system. Detailed temperature maps were generated using a combination of fiber optics temperature sensor and multiple thermocouple probes within the simulated reactor cavities. The research scenario involved a hypothetical small pipe break in the Reactor Pressure Vessel, resulting in the release of high-temperature helium into the surrounding cavity. A scaled multi-compartment experimental facility, modeled after the General Atomics Modular High Temperature Gas Reactor (GA-MHTGR) design, was constructed for helium and air mixing experiments. Oxygen sensors and thermocouple probes were installed in all five cavities to measure the concentrations of oxygen (or helium) and the temperature distributions of the gas mixture. The experimental findings highlighted the significant impact of the injected helium jet velocity on the gas mixing process and demonstrated how the direction of the helium jet influences the air-helium temperature profiles within the cavities.

Air-ingress↗
DOE OSTI2022

Standardized excitable elements for scalable engineering of far-from-equilibrium chemical networks

Engineered far-from-equilibrium synthetic chemical networks that pulse or switch states in response to environmental signals could precisely regulate the kinetics of chemical synthesis or self-assembly. Currently, such networks must be extensively tuned to compensate for the different activities of and unintended reactions between a network’s various chemical components. Modular elements with standardized performance could be used to rapidly construct networks with designed functions. Here we develop standardized excitable chemical regulatory elements, termed genelets, and use them to construct complex in vitro transcriptional networks. We develop a protocol for identifying >15 interchangeable genelet elements with uniform performance and minimal crosstalk. Furthermore, these elements can be combined to engineer feedforward and feedback modules whose dynamics match those predicted by a simple kinetic model. Modules can then be rationally integrated and organized into networks that produce tunable temporal pulses and act as multistate switchable memories. Standardized genelet elements, and the workflow to identify more, should make engineering complex far-from-equilibrium chemical dynamics routine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

KG-Hub—building and exchanging biological knowledge graphs

Knowledge graphs (KGs) are a powerful approach for integrating heterogeneous data and making inferences in biology and many other domains, but a coherent solution for constructing, exchanging, and facilitating the downstream use of KGs is lacking. Here we present KG-Hub, a platform that enables standardized construction, exchange, and reuse of KGs. Features include a simple, modular extract–transform–load pattern for producing graphs compliant with Biolink Model (a high-level data model for standardizing biological data), easy integration of any OBO (Open Biological and Biomedical Ontologies) ontology, cached downloads of upstream data sources, versioned and automatically updated builds with stable URLs, web-browsable storage of KG artifacts on cloud infrastructure, and easy reuse of transformed subgraphs across projects. Current KG-Hub projects span use cases including COVID-19 research, drug repurposing, microbial–environmental interactions, and rare disease research. KG-Hub is equipped with tooling to easily analyze and manipulate KGs. KG-Hub is also tightly integrated with graph machine learning (ML) tools which allow automated graph ML, including node embeddings and training of models for link prediction and node classification.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Digital Safety Analysis for Small Modular Nuclear Reactors (SMRs)

A Documented Safety Analysis (DSA) is a Department of Energy (DOE) construct that defines the extent to which a nuclear facility can be operated safely. It includes a description of hazards, safe boundaries, and hazard controls. The authors assert that a Digital Safety Analysis (DgSA) is far superior to a legacy DSA for several reasons: • The underling database is structured such that it is possible to perform a comprehensive design review and safety analysis by iterating systematically across a hierarchy of linked objects versus a redundant and spotty review by entities of various abilities under unknown resource and schedule constraints. • The analysis of a new design can discover elements that are similar to elements in previous designs. The discovery of similarities is made possible by using the same structure for the underlying database for each new DgSA. The “prior learning” from previous designs is then applied automatically to new designs. • Outputs from the DgSA are from a single source to ensure consistency among various views of the same information. After the DgSA is released, the continued use of a single source implements a configuration management program to ensure consistency between the design basis, the design, the built system, and system procedures. • The development of the DgSA is agile in that any change in a linked object triggers an analysis of impacts on other linked objects and updates of linked objects are made accordingly. After the DgSA is released, the continued maintenance of these links and objects automates the “unreviewed safety question” process.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

One-loop matrix elements of effective superstring interactions: α' -expanding loop integrands

In the low-energy effective action of string theories, non-abelian gauge interactions and supergravity are augmented by infinite towers of higher-mass-dimension operators. We propose a new method to construct one-loop matrix elements with insertions of operators D 2k F n and D 2k R n in the tree-level effective action of type-I and type-II superstrings. Inspired by ambitwistor string theories, our method is based on forward limits of moduli-space integrals using string tree-level amplitudes with two extra points, expanded in powers of the inverse string tension α'. Similar to one-loop ambitwistor computations, intermediate steps feature non-standard linearized Feynman propagators which eventually recombine to conventional quadratic propagators. With linearized propagators the loop integrand of the matrix elements obey one-loop versions of the monodromy and KLT relations. We express a variety of four- and five-point examples in terms of quadratic propagators and formulate a criterion on the underlying genus-one correlation functions that should make this recombination possible at all orders in α'. The ultraviolet divergences of the one-loop matrix elements are crosschecked against the non-separating degeneration of genus-one integrals in string amplitudes. Conversely, our results can be used as a constructive method to determine degenerations of elliptic multiple zeta values and modular graph forms at arbitrary weight.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Low-loss interconnects for modular superconducting quantum processors

Low-loss superconducting aluminium cables and on-chip impedance transformers can be used to link qubit modules and create superconducting quantum computing networks with high-fidelity intermodule state transfer. Scaling is now a key challenge in superconducting quantum computing. One solution is to build modular systems in which smaller-scale quantum modules are individually constructed and calibrated and then assembled into a larger architecture. This, however, requires the development of suitable interconnects. Here we report low-loss interconnects based on pure aluminium coaxial cables and on-chip impedance transformers featuring quality factors of up to 8.1 x 10 5 , which is comparable with the performance of our transmon qubits fabricated on a single-crystal sapphire substrate. We use these interconnects to link five quantum modules with intermodule quantum state transfer and Bell state fidelities of up to 99%. To benchmark the overall performance of the processor, we create maximally entangled, multiqubit Greenberger-Horne-Zeilinger states. The generated intermodule four-qubit Greenberger-Horne-Zeilinger state exhibits 92.0% fidelity. We also entangle up to 12 qubits in a Greenberger-Horne-Zeilinger state with 55.8 ± 1.8% fidelity, which is above the genuine multipartite entanglement threshold of 1/2.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Future grid mix impacts on whole-building life cycle assessment

Building construction and operation are a significant contribution to global greenhouse gas emissions, so understanding and mitigating emissions is crucial for reliable and realistic emissions accounting. Whole-building Life Cycle Assessment (WBLCA) is an emissions accounting method that considers lifetime environmental impacts of a building during its construction, operation, and eventual end-of-life. When performing WBLCAs, emission calculations from the building's operation over the entire building lifespan are typically based on today's energy grid mixes. This method does not consider changes or advancements in the clean energy proportion within the grid mix and can over or under-inflate results, skewing the ratio of embodied vs. operational environmental impacts. While a variety of prediction tools estimate what future grid emissions might be, predictions can vary widely. To predict the clean energy ratio within future grid mixes and the potential impact these changes might have on WBLCA, annual data from several existing U.S. grid models was averaged and probabilistic modeling was used to extend the usable projections of shorter forecasts. Results show that clean energy sources will likely continue to increase over time, although the rate of growth varies by model. On average, by 2085, the clean energy penetration of the grid is projected to reach ~81% and renewable energy is projected to reach ~71%, although no widespread consensus is reached. To understand how the future grid mix impacts lifetime building emissions within a WBLCA context, the team analyzed two 2021 IECC-compliant all-electric residential buildings: one built from traditional materials and construction processes and the other built with carbon sequestering materials and modular assembly, with a portion of energy generated on site. The results indicate that a moderate estimate of future electricity grid mixes shows a reduction of yearly operational emissions for traditional residential buildings of 55% between 2025 and 2085, and a corresponding reduction of 48% of total emissions over a 60 year building lifespan. This study offers a nuanced approach to account for the variability of future grid mix models and provides an average trend-line based on a robust collection of scenarios.

Life Cycle Assessment (LCA)↗
DOE OSTI2024

Non-chiral vertex operator algebra associated to Lorentzian lattices and Narain CFTs

Frenkel, Lepowsky, and Meurman constructed a vertex operator algebra (VOA) associated to any even, integral, Euclidean lattice. In the language of physics, these are examples of chiral conformal field theories (CFT). In this paper, we define non-chiral vertex operator algebra and some associated notions. We then give a construction of a non-chiral VOA associated to an even, integral, Lorentzian lattice and construct their irreducible modules. We obtain the moduli space of such modular invariant non-chiral CFTs based on even, self-dual Lorentzian lattices of signature (m,n) ( m , n ) assuming the validity of a technical result about automorphisms of the lattice. We finally show that Narain conformal field theories in physics are examples of non-chiral VOA. Our formalism helps us to identify the chiral algebra of Narain CFTs in terms of a particular sublattice and give us the decomposition of its partition function into sum of characters.

Singh, Ranveer Kumar (ORCID:000000026385704X)↗
DOE OSTI2024

Concrete Thermal Energy Storage Enabling Flexible Operation without Coal Plant Cycling

The work described in this report is responsive to the Office of Fossil Energy program “Energy Storage for Fossil Power Generation.” The pilot plant built as a result of this project demonstrated the feasibility and performance of a concrete thermal energy storage (CTES) system integrated with a supercritical coal power plant. The 10 MWh electrical (>25 MWh thermal) CTES unit, developed by Storworks Power, was designed to enable flexible operation of coal plants without cycling damage. The project's key technical achievements showcase a significant advancement in energy storage technology. A modular CTES system using 42 “Bolderblocs” units was successfully designed and constructed at Alabama Power’s Plant Gaston Unit 5, with each block containing embedded stainless-steel coils in specialized, cost-effective high-temperature concrete. The system interfaced seamlessly with the plant's 3500 psig (241 barg), 1000°F (538°C) supercritical steam, demonstrating operational flexibility. Over 86 full cycles, the CTES exhibited rapid charging and discharging capabilities, effectively mimicking steam turbine feed conditions and handling varying load profiles and storage durations. Performance validation confirmed the system's ability to consistently meet design target steam conditions of 75 bar-a and ~400°C for nominal baseline discharge. The concrete material withstood repeated thermal cycling without degradation, validating earlier lab-scale tests. Integration of balance of plant components, including a condensate management system with storage tank and air-cooled condenser, minimized plant interfaces and water consumption. A robust control scheme ensured safe, automated operation across various scenarios. Key learnings from the project were invaluable: 1. Initial concrete drying and commissioning procedures were refined for future deployments, enhancing efficiency in subsequent installations. 2. System flexibility exceeded expectations, with rapid response to changing conditions. 3. Design improvements were identified including optimized insulation and piping that will enhance overall system efficiency in future deployments 4. Full cycle thermal roundtrip efficiencies exceeded 88%. While the roundtrip electrical efficiency was somewhat limited by known challenges using input steam, such constraints may be mitigated by swapping steam for hot air as thermal input. 5. A summary of key performance parameters for the pilot test and predicted performance of a full scale commercial system with specified improvements determined from the pilot are shown in Section 8. The project faced challenges, including COVID-19 delays and host plant availability constraints. However, these were overcome through adaptive planning and execution. The successful management of these obstacles demonstrated the resilience and adaptability of the project team and the robustness of the CTES technology. This successful pilot demonstrates the potential for CTES to enhance coal plant flexibility, supporting grid stability as renewable penetration increases. The validated design and operational data provide a solid foundation for scaling up to utility-scale implementations, potentially transforming how thermal plants operate in evolving energy landscapes. The system's ability to rapidly respond to changing grid conditions while maintaining high efficiency makes it a promising solution for balancing intermittent renewable energy sources. Furthermore, the project highlighted the potential for even greater efficiencies in future iterations. The use of air as an input medium could potentially eliminate the limitations observed with steam input, opening new possibilities for energy storage applications beyond coal plant integration. In conclusion, this pilot project not only achieved its primary goals but also uncovered additional benefits and potential applications of the CTES technology. It represents a significant step forward in addressing the challenges of grid stability and flexibility in an increasingly renewable-driven energy landscape.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Hydrogen production from high-volume organic construction and demolition wastes

The Energy & Environmental Research Center (EERC) has partnered with Simonpietri Enterprises, LLC (SEL) with the objective of developing an integrated waste preparation, gasification, and syngas cleanup process capable of using a high-volume, negative-value, highly contaminated feedstock consisting of construction and demolition (C&D) waste to economically produce 99+% pure hydrogen. The target is to achieve $\$$1/kg H2 at a modular scale ranging from 5- to 50-MWe-equivalent size by testing the gasification of organic C&D debris containing treated waste lumber and construction materials, permanently sequestering contaminants into the ash. C&D debris waste is one the largest-volume waste streams in the United States; is already aggregated and available across the country, lending itself to hub operations; and has fewer alternatives for energy conversion than are available for coal, biomass, and municipal solid waste because of contamination from treated lumber and other construction materials.

08 HYDROGEN↗
DOE OSTI2020

A modular chromosomally integrated toolkit for ectopic gene expression in Vibrio cholerae

The ability to express genes ectopically in bacteria is essential for diverse academic and industrial applications. Two major considerations when utilizing regulated promoter systems for ectopic gene expression are (1) the ability to titrate gene expression by addition of an exogenous inducer and (2) the leakiness of the promoter element in the absence of the inducer. Here, we describe a modular chromosomally integrated platform for ectopic gene expression in Vibrio cholerae . We compare the broadly used promoter elements P tac and P BAD to versions that have an additional theophylline-responsive riboswitch (P tac -riboswitch and P BAD -riboswitch). These constructs all exhibited unimodal titratable induction of gene expression, however, max induction varied with P tac > P BAD > P BAD -riboswitch > P tac -riboswitch. We also developed a sensitive reporter system to quantify promoter leakiness and show that leakiness for P tac > P tac -riboswitch > P BAD ; while the newly developed P BAD -riboswitch exhibited no detectable leakiness. We demonstrate the utility of the tightly inducible P BAD -riboswitch construct using the dynamic activity of type IV competence pili in V. cholerae as a model system. The modular chromosomally integrated toolkit for ectopic gene expression described here should be valuable for the genetic study of V. cholerae and could be adapted for use in other species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Security-by-Design: Light Water Small Modular Reactor

The growing demand for nuclear power is increasing pressure to find solutions to cost prohibitive requirements of both construction and security. Offsite response has been proposed as an option to reduce costs associated with training and maintaining an onsite response force. A previous report explored this option and revealed that security could be provided at the required level, but cost savings was not a result of this methodology. An offsite response strategy required costly active and passive delay barriers to provide sufficient time for responders to muster and deploy to a site in time to interrupt a determined and well-equipped adversary. Also, contrary to the hypothesis, the number of responders required for this strategy exceeded that needed for an onsite response force, as the adversaries could avail themselves of advantageous positions within the facility to repel arriving responders. This report builds upon the previous evaluation by using the same hypothetical light water small modular reactor (LWSMR) facility model, but this time an onsite response strategy was assessed. The goal of this analysis was to show that an onsite response strategy could be implemented effectively at a cost point that removes barriers within the industry at this critical time of growth and development. The assessment of the facility design and response strategy was completed through modeling using Scribe3D© and subsequent scenario analysis over the course of a two-day tabletop exercise. Subject matter experts in nuclear security, nuclear facility design, and response strategy and tactics contributed to the effort to ensure accurate representation of hypothetical scenarios. Several adaptations were made to the layout of the LWSMR based on lessons learned during the first day of scenario analysis. The subsequent design evaluated on the second day proved to provide a robust response posture against a large and well-trained adversary force. This report details the process of the analysis and compares the cost of the final facility design with that of the LWSMR model used for evaluation of offsite response. Ultimately, the results of this effort indicate that, when implemented correctly, an onsite response strategy is the best option from a security and cost perspective.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Cryogen-free modular scanning tunneling microscope operating at 4-K in high magnetic field on a compact ultra-high vacuum platform

One of the daunting challenges in modern low temperature scanning tunneling microscopy (STM) is the difficulty of combining atomic resolution with cryogen-free cooling. Further functionality needs, such as ultra-high vacuum (UHV), high magnetic field (HF), and compatibility with μm-sized samples, pose additional challenges to an already ambitious build. We present the design, construction, and performance of a cryogen-free, UHV, low temperature, and high magnetic field system for modular STM operation. An internal vibration isolator reduces vibrations in this system, allowing for atomic resolution STM imaging while maintaining a low base temperature of ∼4 K and magnetic fields up to 9 T. Samples and tips can be conditioned in situ utilizing a heating stage, an ion sputtering gun, an e-beam evaporator, a tip treater, and sample exfoliation. In situ sample and tip exchange and alignment are performed in a connected UHV room temperature stage with optical access. Multisite operation without breaking vacuum is enabled by a unique quick-connect STM head design. A novel low-profile vertical transfer mechanism permits transferring the STM between room temperature and the low temperature cryostat.

Instruments & Instrumentation↗
DOE OSTI2026

Coarse-grained fixed-point tensor networks and holographic reflected entropy in 3D gravity

We use the framework of fixed-point BCFT tensor networks to present a microscopic CFT derivation of the correspondence between reflected entropy (RE) and entanglement wedge cross section (EW) in AdS 3 /CFT 2 , for both bipartite and multipartite settings. These fixed-point tensor networks, obtained by triangulating Euclidean CFT path integrals, allow us to explicitly construct the canonical purification via cutting-and-gluing CFT path integrals. Employing modular flow in the large-c limit, we demonstrate that these intrinsic CFT manipulations reproduce bulk geometric prescriptions, without assuming the AdS/CFT dictionary. The emergence of bulk geometry is traced to coarse-graining over heavy states in the large-c limit. Universal coarse-grained BCFT data for compact 2D CFTs, through the relation to Liouville theory with ZZ boundary conditions, yields hyperbolic geometry on the Cauchy slice. The corresponding averaged replica partition functions reproduce all candidate EWs, arising from different averaging patterns, with the dominant one providing the correct RE and EW. In this way, many heuristic tensor-network intuitions in toy models are made precise and established directly from intrinsic CFT data.

AdS-CFT correspondence↗
DOE OSTI2020

Bacterial genome editing by coupling Cre-lox and CRISPR-Cas9 systems

The past decade has been a golden age for microbiology, marked by the discovery of an unprecedented increase in the number of novel bacterial species. Yet gaining biological knowledge of those organisms has not kept pace with sequencing efforts. To unlock this genetic potential there is an urgent need for generic (i.e. non-species specific) genetic toolboxes. Recently, we developed a method, termed chassis-independent recombinase-assisted genome engineering (CRAGE), enabling the integration and expression of large complex gene clusters directly into the chromosomes of diverse bacteria. Here we expand upon this technology by incorporating CRISPR-Cas9 allowing precise genome editing across multiple bacterial species. To do that we have developed a landing pad that carries one wild-type and two mutant lox sites to allow integration of foreign DNA at two locations through Cre-lox recombinase-mediated cassette exchange (RMCE). The first RMCE event is to integrate the Cas9 and the DNA repair protein genes RecET, and the second RMCE event enables the integration of customized sgRNA and a repair template. Following this workflow, we achieved precise genome editing in four different gammaproteobacterial species. We also show that the inserted landing pad and the entire editing machinery can be removed scarlessly after editing. We report here the construction of a single landing pad transposon and demonstrate its functionality across multiple species. The modular design of the landing pad and accessory vectors allows design and assembly of genome editing platforms for other organisms in a similar way. We believe this approach will greatly expand the list of bacteria amenable to genetic manipulation and provides the means to advance our understanding of the microbial world.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Quantum Computing for AI-based Design and Optimization of Electric Motors

Knowledge-based artificial intelligence and hierarchical fuzzy logic offer an interpretable framework for electricvehicle motor preliminary design, but their computational burden grows with linguistic granularity and coupled design-space size. This paper presents a reduced quantum reformulation of the hierarchical fuzzy inference of air-gap flux density, a representative level-one motor-design parameter. Starting from the published electric-vehicle motor-design framework, a three-term fuzzy prototype is constructed from the original inference structure. The reduced model is then reformulated as a modular quantum register-oracle system, in which each hierarchical subrelation is encoded as a block oracle and evaluated through superpositionbased candidate-label testing. The proposed modular quantum formulation reproduces the reduced classical prototype after block fusion. A resource analysis shows that the reduced modular system requires seven qubits per block and twenty-two qubits in a straightforward four-block implementation. Finally, a crossovercomplexity model is derived to identify the regime in which quantum candidate search may become favorable relative to hierarchical fuzzy inference. The results show that no quantum advantage should be claimed for the present one-output reduced benchmark, but that a plausible crossover emerges for larger joint candidate spaces and higher linguistic granularity. The work therefore establishes a technically consistent starting point for future quantum-assisted electric-vehicle motor-design optimization.

Kumar, Praveen [ORNL] (ORCID:0000000291877857)↗
DOE OSTI2021

Bound Constrained Partial DifferentialEquation Inverse Problem Solution by theSemi-Smooth Newton Method

We present the mathematical derivation, software implementation details, and computational results for a semi-smooth Newton method applied to two inverse problems governed by partial differential equations with bound constraints. The two problems share mathematical structural similarities to density-based topology optimization problems. The semi-smooth Newton method provides a mesh independent solution computation for the two test problems. A key step is that the complementarity part of the necessary optimality conditions are reformulated with the use of a complementarity functionφsuch that the complementarity conditions are satisfied if and only if a zero of a nonsmooth function has been obtained. The modular finite element package MFEM is utilized for the software implementation. In addition we constructed a matrix-free Operator to enable the use of efficient Krylov subspace IterativeSolver of MFEM for the solution of our two target problems.

97 MATHEMATICS AND COMPUTING↗