Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoscale modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mesoscale modeling of restructuring in high burnup UO 2 fuel

Here, this work aims to simulate the restructuring behavior observed in different regions of high burnup fuel, providing a first-of-its-kind restructuring model for the dark zone and rim region of high-burnup UO 2 fuel. We employed a grand-potential-based phase-field model to concurrently evaluate subgrain formation and the growth of fission gas bubbles within the fuel. An energy-based subgrain formation criterion was introduced to simulate the restructuring process. The effects of different initial conditions and different modeling parameters were systematically studied to capture how each of these parameters influences the characteristics of the restructured fuel. Subgrain formation was observed to begin around existing fission gas bubbles and proceed toward triple junctions, grain boundaries, and grain interiors. Restructuring was demonstrated to be influenced by a combination of initial dislocation densities, burnup rate, subgrain formation rate, and temperature. Under a given subgrain formation rate, the rate of restructuring increases with rising fuel temperature. A restructuring bias was observed within the microstructure, due to the variation in defect accumulation when comparing different grains. Microstructures corresponding to the dark zone and rim region can be obtained by parameterizing the model with the appropriate defect production rate, as determined based on the burnup rate and temperature. Furthermore, bubble size and distribution do not significantly affect the rate of restructuring. The predicted microstructures are consistent with experimental observations of the restructured regions. Finally, we present a correlation demonstrating the evolution of the restructuring volume fraction as a function of local burnup.

UO2↗
DOE OSTI2022

Reconciliation of asynchronous satellite-based $\mathrm{NO_2}$ and $\mathrm{XCO_2}$ enhancements with mesoscale modeling over two urban landscapes

Fossil fuel carbon dioxide (CO 2ff ), the main driver of global warming and climate change, is often co-emitted with nitrogen oxides (NO x ) and precursors to ground-level ozone from anthropogenic sources like power plants or vehicles. In urban and suburban areas, satellite-based NO 2 can be used as a proxy to track the emissions of CO 2ff . Because of NO 2 ’s shorter lifetime, urban NO 2 plumes are more distinguishable from backgrounds and more sensitive to variations in emissions. However, the combination of these two gases is limited by the asynchrony among NO 2 and CO 2 monitoring satellites. We used CO 2ff simulated by the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) model to reconcile the tropospheric NO 2 vertical column density (VCD) from the Tropospheric Monitoring Instrument (TROPOMI) and column-averaged dry-air mole fractions of carbon dioxide enhancements (ΔXCO 2 ) from Orbiting Carbon Observatory 3 (OCO-3) Snapshot Area Maps (SAMs) over a multicity area, Washington D.C.-Baltimore (DC-Balt), and a basin city, Mexico City. NO 2 /CO 2ff ratios over DC-Balt are smaller than Mexico City, indicative of stricter emission restrictions, a more combustion-efficient vehicle fleet, and higher combustion efficiency due to lower altitude in DC-Balt. For single-track cases, the spatial correlations between NO 2 and ΔXCO 2 over Mexico City are stronger than DC-Balt because the NO 2 and CO 2 are mostly trapped in the valley of Mexico City, while DC-Balt is severely affected by distant sources (i.e., US East Coast cities). Using multi-track averaging, spatial correlation coefficients increase with the number of days used for averaging. The correlations reached a maximum when averaging >12 continuous images for DC-Balt and > 10 continuous images for Mexico City. This finding indicates that multi-track averaging using modeled CO 2ff as a proxy is helpful to filter the noise in single-track images, to cancel the interference from distant sources, and to magnify correlations between NO 2 and CO 2ff . Mexico City showed stronger spatial correlations but weaker temporal correlations than DC-Balt due to biomass burning hot spots and large transport errors caused by the trapping effects of the surrounding mountains. Tracking the 20-day moving average of CO 2ff emissions using TROPOMI NO 2 seems technically feasible, considering the relationship between correlation coefficients and the number of available satellite images.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Sensitivity of mesoscale modeling to urban morphological feature inputs and implications for characterizing urban sustainability

We examine the differences in meteorological output from the Weather Research and Forecasting (WRF) model run at 270 m horizontal resolution using 10 m, 100 m and 1 km resolution 3D neighborhood morphological inputs and with no morphological inputs. We find that the spatial variability in temperature, humidity, and other meteorological variables across the city can vary with the resolution and the coverage of the 3D urban morphological input, and that larger differences occur between simulations run without 3D morphological input and those run with some type of 3D morphology. We also find that the inclusion of input-building-defined roughness length calculations would improve simulation results further. We show that these inputs produce different patterns of heat wave spatial heterogeneity across the city of Washington, DC. These findings suggest that understanding neighborhood level urban sustainability under extreme heat waves, especially for vulnerable neighborhoods, requires attention to the representation of surface terrain in numerical weather models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Mesoscale modeling to inform Bison models of accident tolerant fuel concepts

U 3 Si 2 and doped UO 2 have been under investigation in recent years as potential accident-tolerant fuel concepts. In this report, lower-length scale studies of these fuel concepts carried out during Fiscal Year 2020 are detailed. U 3 Si 2 is a potential accident-tolerant fuel that shows promise due to its high thermal conductivity and higher uranium density relative to UO 2 . However, its swelling and fission gas release behavior in light water reactor (LWR) conditions is relatively unknown. To provide mechanistic insight and determine parameters for engineering-scale fuel performance modeling of pellet-form U 3 Si 2 , phase-field simulations of the growth, interconnection, and venting of intergranular fission gas bubbles were performed. The fractional coverage of the grain boundary and the fraction of bubble area that is vented were calculated as a function of time. From the simulation data, the fractional grain boundary coverage at saturation, an important parameter needed in engineering-scale modeling of swelling and fission gas release, was determined. Multiple simulations were run to determine the uncertainty in the calculated value. The effect of model assumptions and input parameters that are not well known was evaluated. Simulation results are compared to related theoretical and computational work. Based on the simulation results, a value of 0.60 for the fractional grain boundary coverage at saturation is recommended for U 3 Si 2 fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Lidar Measurements and High-Resolution Mesoscale Modeling of Coastally Trapped Disturbances off the Coast of California

Coastally Trapped disturbances (CTDs) are shifts in wind direction from the pre-dominant direction to equatorward to poleward for a period of time. These CTDs occur during the warm season off the California coast and impact coastal weather conditions and planned offshore wind plants. This study assesses the characteristics of CTD events as observed by lidar and other offshore buoys, then evaluates the ability of modeling systems to capture the correct characteristics, leveraging model output from the High-Resolution Rapid Refresh (HRRR) operational modeling system and the NOW-23 (National Offshore Wind) model dataset. CTDs were analyzed for October 2020 and May through to October of 2021, identifying 18 unique CTD events, confirmed by a nearby National Data Buoy Center (NDBC) buoy. The HRRR model captured most of these events, but the NOW-23 model output contained only 12 events. Composites of the wind, temperature, and pressure perturbations pre-, during, and post-event demonstrated the diminishment in wind speed, particularly for the alongshore component. Although the NOW-23 model captured the alongshore wind component and pressure perturbations well, the cross-shore wind component and temperature perturbations varied substantially. When the turbulent kinetic energy deviation and wind shear was positive across all levels pre-event, the NOW-23 modeling system was less likely to capture the CTD event. In contrast, the events that were captured by the model tended to have negative wind shear aloft pre-event.

coastal meteorology↗
DOE OSTI2020

Turbulent kinetic energy over large offshore wind farms observed and simulated by the mesoscale model WRF (3.8.1)

Abstract. Wind farms affect local weather and microclimates;hence, parameterizations of their effects have been developed for numerical weather prediction models.While most wind farm parameterizations (WFPs) include drag effects of wind farms, models differ on whether or not an additionalturbulent kinetic energy (TKE) source should be included in theseparameterizations to simulate the impact of wind farms on the boundary layer.Therefore, we use aircraft measurements above large offshore wind farms in stable conditions to evaluateWFP choices. Of the three case studies we examine, we find the simulated ambient backgroundflow to agree with observations of temperature stratification and winds. This agreement allows us toexplore the sensitivity of simulated wind farm effects with respect to modeling choicessuch as whether or not to include a TKE source, horizontal resolution, vertical resolutionand advection of TKE. For a stably stratified marine atmospheric boundary layer (MABL), a TKE source and a horizontal resolutionon the order of 5 km or finer are necessary to represent the impact of offshore wind farms on the MABL.Additionally, TKE advection results in excessively reduced TKE over the wind farms, which in turn causesan underestimation of the wind speed deficit above the wind farm. Furthermore, using fine verticalresolution increases the agreement of the simulated wind speed with satellite observations of surface wind speed.

17 WIND ENERGY↗
DOE OSTI2026

Performance of reanalysis and mesoscale models off the coast of Hawai'i

The eastern Hawai'i coast in the United States is characterized by considerable wind resource fuelled by persistent trade winds, making it an important area for energy research. The need is strong for reanalyses and higher-resolution regional simulations where observations have been historically limited, such as Hawai'i's offshore environments. However, studies using offshore observations in other parts of the world have shown that significant errors can occur in reanalyses and wind datasets, which can lead to inaccurate estimates of wind energy generation, payback periods, and extreme weather risks at project locations. The degree of such errors is influenced by a number of factors, including spatial resolution and the handling of processes within the planetary boundary layer (PBL). In this work, we provide a wind resource characterization from year-long lidar buoy measurements off the eastern coast of O'ahu, Hawai'i, an environment previously unobserved at the rotor level, and use the characterization to evaluate the performance of two simulation datasets. The O'ahu deployment location is meteorologically unique and less complex than land-based wind resource characterizations, being strongly characterized by trade winds with minimal land–atmosphere interaction influences. Despite the unique and fairly consistent meteorological conditions, we hypothesize that distinct simulation datasets will exhibit diverse ranges of errors similar to those that have been seen for other offshore locations. We find the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis version 5 (ERA5) to strongly underestimate observed wind speeds at the O'ahu location (bias = −1.54 m s −1 at a height of 140 m above sea level), while a regional Weather Research and Forecasting Model (WRF) simulation produced by the University of Hawai'i (UH-WRF) provides a significantly smaller wind speed bias (−0.25 m s −1 ), highlighting the value of running regional, higher-resolution simulations. The large bias noted for ERA5 is driven by significant underestimation of fast wind speeds (>9 m s −1 ), which the study site is largely characterized by, along with discontinuities in the ERA5 diurnal cycle. We also speculate that the relative sparsity of observations for data assimilation in this remote part of the world could influence the performance of ERA5 and that challenges with characterizing island effects could impact the performance of both datasets.

17 WIND ENERGY↗
NASA NTRS1983

Utilization of satellite data in mesoscale models of severe weather

The impact of the diagnostic initialization of divergence on short-range precipitation forecasts produced by a model, a numerical study of a storm, collaborative modeling and diagnostic studies, and a numerical investigation of the impact of SEASAT surface wind data used in the static initialization of the North Atlantic Storm of 9-10 September 1978 are summerized.

Warner, T. T.↗