Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Model Determined for Predicting Fatigue Lives of Metal Matrix Composites Under Mean Stresses

Aircraft engine components invariably are subjected to mean stresses over and above the cyclic loads. In monolithic materials, it has been observed that tensile mean stresses are detrimental and compressive mean stresses are beneficial to fatigue life in comparison to a base of zero mean stress. Several mean stress models exist for monolithic metals, but each differ quantitatively in the extent to which detrimental or beneficial effects are ascribed. There have been limited attempts to apply these models to metal matrix composites. At the NASA Lewis Research Center, several mean stress models--the Smith-Watson- Topper, Walker, Normalized Goodman, and Soderberg models--were examined for applicability to this class of composite materials. The Soderberg approach, which normalizes the mean stress to a 0.02-percent yield strength, was shown to best represent the effect of mean stresses over the range covered. The other models varied significantly in their predictability and often failed to predict the composite behavior at very high tensile mean stresses. This work is the first to systematically demonstrate the influence of mean stresses on metal matrix composites and model their effects. Attention also was given to fatigue-cracking mechanisms in the Ti-15-3 matrix and to micromechanics analyses of mean stress effects.

Lerch, Bradley↗

THE INFLUENCE OF DISSIPATION RANGE POWER SPECTRA AND PLASMA-WAVE POLARIZATION ON COSMIC-RAY SCATTERING MEAN FREE PATH

The influence of the polarization state and the dissipation range spectral steepening of slab plasma waves on the scattering mean free path of single-charged cosmic-ray particles is investigated in a turbulence model, where the crucial scattering of cosmic-ray particles with small pitch-angle cosines is caused by resonant cyclotron interactions with slab plasma waves. Analytical expressions for the mean free path of protons, antiprotons, negatrons, and positrons are derived for the case of constant frequency-independent magnetic helicity values {sigma} and different values of the dissipation range spectral index k for characteristic interplanetary and interstellar plasma conditions. The positron mean free path is not affected by the dissipation range spectral index k as these particles can only cyclotron-resonate for rigidity values larger than R {sub 0} = m{sub p}c = 938 MV. Proton and antiproton mean free paths are only slightly affected by the dissipation range spectral index k at small rigidities R < R {sub 0}. The negatron mean free path is severely affected by the dissipation range spectral index k at rigidities smaller than R {sub 0}. At high rigidities R >> R {sub 0}, all particle species approach the same power-law dependence {proportional_to}R {sup 2-s} determined by the inertial range spectral index s = 5/3. The magnetic helicity value {sigma} affects the value of the mean free path. At all rigidities, the ratio of the antiproton to proton mean free paths equals the constant (1 + {sigma})/(1 - {sigma}), which also agrees with the ratio of the negatron to the proton and positron mean free paths at relativistic rigidities. At relativistic rigidities the positron and proton mean free paths agree, as do the negatron and antiproton mean free paths.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of Pretreatment FDG-PET SUV Parameters in Head-and-Neck Cancer: Tumor SUV{sub mean} Has Superior Prognostic Value

Purpose: To evaluate the prognostic significance of different descriptive parameters in head-and-neck cancer patients undergoing pretreatment [F-18] fluoro-D-glucose-positron emission tomography (FDG-PET) imaging. Patients and Methods: Head-and-neck cancer patients who underwent FDG-PET before a course of curative intent radiotherapy were retrospectively analyzed. FDG-PET imaging parameters included maximum (SUV{sub max}), and mean (SUV{sub mean}) standard uptake values, and total lesion glycolysis (TLG). Tumors and lymph nodes were defined on co-registered axial computed tomography (CT) slices. SUV{sub max} and SUV{sub mean} were measured within these anatomic regions. The relationships between pretreatment SUV{sub max}, SUV{sub mean}, and TLG for the primary site and lymph nodes were assessed using a univariate analysis for disease-free survival (DFS), locoregional control (LRC), and distant metastasis-free survival (DMFS). Kaplan-Meier survival curves were generated and compared via the log-rank method. SUV data were analyzed as continuous variables. Results: A total of 88 patients was assessed. Two-year OS, LRC, DMFS, and DFS for the entire cohort were 85%, 78%, 81%, and 70%, respectively. Median SUV{sub max} for the primary tumor and lymph nodes was 15.4 and 12.2, respectively. Median SUV{sub mean} for the primary tumor and lymph nodes was 7 and 5.2, respectively. Median TLG was 770. Increasing pretreatment SUV{sub mean} of the primary tumor was associated with decreased disease-free survival (p = 0.01). Neither SUV{sub max} in the primary tumor or lymph nodes nor TLG was prognostic for any of the clinical endpoints. Patients with pretreatment tumor SUV{sub mean} that exceeded the median value (7) of the cohort demonstrated inferior 2-year DFS relative to patients with SUV{sub mean} {<=} the median value of the cohort, 58% vs. 82%, respectively, p = 0.03. Conclusion: Increasing SUV{sub mean} in the primary tumor was associated with inferior DFS. Although not routinely reported, pretreatment SUV{sub mean} may be a useful prognostic FDG-PET parameter and should be further evaluated prospectively.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SU-D-204-02: BED Consistent Extrapolation of Mean Dose Tolerances

Purpose: The safe use of radiotherapy requires the knowledge of tolerable organ doses. For experimental fractionation schemes (e.g. hypofractionation) these are typically extrapolated from traditional fractionation schedules using the Biologically Effective Dose (BED) model. This work demonstrates that using the mean dose in the standard BED equation may overestimate tolerances, potentially leading to unsafe treatments. Instead, extrapolation of mean dose tolerances should take the spatial dose distribution into account. Methods: A formula has been derived to extrapolate mean physical dose constraints such that they are mean BED equivalent. This formula constitutes a modified BED equation where the influence of the spatial dose distribution is summarized in a single parameter, the dose shape factor. To quantify effects we analyzed 14 liver cancer patients previously treated with proton therapy in 5 or 15 fractions, for whom also photon IMRT plans were available. Results: Our work has two main implications. First, in typical clinical plans the dose distribution can have significant effects. When mean dose tolerances are extrapolated from standard fractionation towards hypofractionation they can be overestimated by 10–15%. Second, the shape difference between photon and proton dose distributions can cause 30–40% differences in mean physical dose for plans having the same mean BED. The combined effect when extrapolating proton doses to mean BED equivalent photon doses in traditional 35 fraction regimens resulted in up to 7–8 Gy higher doses than when applying the standard BED formula. This can potentially lead to unsafe treatments (in 1 of the 14 analyzed plans the liver mean dose was above its 32 Gy tolerance). Conclusion: The shape effect should be accounted for to avoid unsafe overestimation of mean dose tolerances, particularly when estimating constraints for hypofractionated regimens. In addition, tolerances established for a given treatment modality cannot necessarily be applied to other modalities with drastically different dose distributions.

60 APPLIED LIFE SCIENCES↗

The determination of the mass and mean density of Enceladus from its observed shape

Application of limb-fitting methods to the 11 best Voyager 2 images of Enceladus has shown that the shape of this satellite is closely represented by a triaxial ellipsoid. The observed ratio of the differences of the principal axes F = (b - c)/(a - c) is 0.23 (sup +0.04 sub - 0.01), consisting with the value F = 0.23 expected for a synchronously rotating satellite in hydrostatic equilibrium. We also deduce from the Voyager observations, after allowing for limb topography, that the mean radius of the satellite is 249.4 +/- 0.2 km. For satellites of known mass, measurement of the size and shape leads to a determination of the satellite's mean density and moment of inertial. We have used this method to determine the moments of inertia of Mimas (1988) and Tethys (1991). Enceladus appears to be hydrostatically relaxed, making it an ideal candidate for this type of analysis. However, none of the Pioneer or Voyager spacecraft had a close encounter with this satellite and thus its mass is effectively unknown. Enceladus is trapped in a 2:1 orbit-orbit resonance with Dione, but the amplitudes of libration are too small to allow a useful mass determination. Using the observed shape alone, without any other assumptions other than that the satellite is in hydrostatic equilibrium at its present orbital radius, we place an upper bound on the mean density of 1.12 +/- 0.05 g/cu cm. Thus, the mean density of Enceladus is probably little more than that of water-ice and we conclude that this satellite is markedly deficient in rock. If the mass of a satellite is unknown, but the satellite is differentiated and has a deep mantle of known composition, then we show that measurement of the shape alone can lead to a determination of the satellite's mass, mean density, and moment of inertia. Application of this method to Enceladus, assuming that the satellite has a deep mantle of water-ice of density 0.93 g/cu cm, gives the result that the mean density of the satellite is 1.00 +/- 0.03 g/cu cm. This result fills the one remaining gap in our knowledge of the structure of the Saturnian satellite system. We now know the mean densities of all the primary Saturnian satellites in the sequence from the coorbital satellites, Janus and Epimetheus, through to the outer satellite Iapetus (the densities of the small, secondary satellites in Trojan-type orbits are still unknown). The Saturnian system possesses two striking features. (1) Because of significant porosity, the mean material densities of the satellites Janus, Epimetheus, and Mimas could be substantially greater than the apparent mean densities of these satellies. (2) The densities of the satellites are not correlated with their distances from the planet; in particular, the satellites Enceladus and Tethys have lower mean densities than their interior and exterior neighbors, Mimas and Dione. This may be the result of gross postformation redistribution of rock and ice, possibly due to satellite disruptions are suggested by Smith et al. (1982).

Dermott, Stanley F.↗

Mean sea surface and geoid gradient comparisons with TOPEX altimeter data

Cycles 4 to 54 of TOPEX data have been analyzed through comparisons with the mean sea surface given on the disturbed geophysical data record (GDR). Two inverted barometer correction procedures were considered for the data reduction. One used a constant atmospheric pressure for all data while the one adopted for use, for most computations, introduced a cycle average pressure. The maximum difference between the two estimates was 3.0 cm with a clear annual signal. With the modified correction the TOPEX sea surface was compared to The Ohio State University (OSU) mean sea surface, given on the GDR, to estimate three translations ( delta x = -2.3 cm; delta y = 25.0 cm; delta z = -0.3 cm) and a bias (43.3 cm) between the two surfaces. The only significant translation is delta y which indicates the reference frame of the TOPEX system differs from that used in the OSU mean sea surface system. The bias between the TOPEX mean sea surface and the OSU mean sea surface was used to estimate an equatorial radius of 6,378,136.55 m based on an 18-cm biased estimate of the TOPEX altimeter. Examination of the average difference, by cycle, between the TOPEX sea surface and the OSU mean sea surface suggested a bias change of 3.1 +/- 2.2 mm/yr with a positive sign indicating the average ocean surface is rising or the altimeter measured distance is decreasing. Models were implemented that solved directly for a bias, bias rate annual/semiannual, and tide correction terms. The computations indicated that a simultaneous solution for this bias, bias rate, and annual/semiannual terms gave the most accurate results. Nonsimultaneous solutions led to slightly different bias rate values. The root mean square difference between the TOPEX sea surface and OSU sea surface, after translation and bias correction, was +/- 17 cm for a typical cycle. Some locations were indentified where the difference could reach 2.3 cm and were repeated over several cycles indicating errors in the mean sea surface. Most of the large differences occur in regions lacking altimeter data prior to the TOPEX/POSEIDON mission and/or areas of significant bathymetric signature. Geoid gradients are needed for the reduction of individual track data to a reference track. The accuracy of the determination of such gradients was determined through the comparison of predicted along-track gradients to the observed gradients. Among four mean sea surfaces tested the best agreement was found with the OSU mean sea surface placed on the TOPEX geophysical data record.

Rapp, Richard H.↗

Distributions of the Mean for Lognormally Distributed Data - 19427

In environmental sciences, a distribution of the mean is often needed for right-skewed data. For example, risk assessments are often based on distributions of the mean to obtain upper confidence limits (UCLs) for analyte concentrations, and, in probabilistic performance assessment (PPA) models, parameters are given distributions rather than deterministic values, and they are usually given distributions of their mean rather than the population distributions to account for the large spatial and temporal domains to which they are applied. How this distribution of the mean is developed depends on the characteristics of the parameter's full distribution and how the parameter relates to its use. In this presentation, I will discuss the implications of a right skew in distribution development. Parameters may vary over orders of magnitude and/or may be right-skewed. The material property of saturated hydraulic conductivity, Ks, is a prime example of such a parameter. Right-skewed parameters are often assumed to follow lognormal distributions. If X follows a lognormal distribution, then log(X) follows a normal distribution. For some right-skewed parameters, practitioners go back and forth between the two forms of the data depending on their needs. For example, it may be preferred to use the untransformed version of X in a model or equation, but it is easier to visualize the parameter values on a logarithmic scale. However, distribution development for the average value of the parameter will differ depending on whether X or log(X) is modeled. This difference is due to Jensen's Inequality, a theorem which states that the expected value of a concave function of a variable is less than or equal to the same function of the expected value of the variable; a logarithm is a concave function. In other words, the mean of log(X) is always less than or equal to the log of the mean of X and therefore the mean estimated from a distribution based on log(X) is less than or equal to the mean estimated from a distribution based on X. If a parameter is naturally considered on a log scale by subject matter experts, then distributions developed for the mean of log(X) may be more consistent with the use of the parameters in the literature than distributions developed for X. The statistical decisions of distribution development will be discussed within the context of right-skewed, lognormal data. These issues include method-of-moments versus maximum likelihood estimation of the distribution parameters and the use of bootstrapping to aid in the visualization of a distribution of the mean. The details surrounding Jensen's Inequality will be explained and visualized within the context of distribution development of a right-skewed parameter such as saturated hydraulic conductivity. (authors)

54 ENVIRONMENTAL SCIENCES↗

Parallel k-means++

A parallelization of the k-means++ seed selection algorithm on three distinct hardware platforms: GPU, multicore CPU, and multithreaded architecture. K-means++ was developed by David Arthur and Sergei Vassilvitskii in 2007 as an extension of the k-means data clustering technique. These algorithms allow people to cluster multidimensional data, by attempting to minimize the mean distance of data points within a cluster. K-means++ improved upon traditional k-means by using a more intelligent approach to selecting the initial seeds for the clustering process. While k-means++ has become a popular alternative to traditional k-means clustering, little work has been done to parallelize this technique. We have developed original C++ code for parallelizing the algorithm on three unique hardware architectures: GPU using NVidia's CUDA/Thrust framework, multicore CPU using OpenMP, and the Cray XMT multithreaded architecture. By parallelizing the process for these platforms, we are able to perform k-means++ clustering much more quickly than it could be done before.

Source record↗

The Lagrangian-mean motions forced by steady, dissipating equatorial waves. I

Waves are treated with a normal mode structure in order to determine the steady mean motion of the atmosphere that can be induced by dissipating equatorial waves. A model is developed which comprises a continuously stratified atmosphere at rest on the equatorial beta-plane. It is assumed that waves are excited by the corrugated bottom and are in a steady state, that dissipation is due to Newtonian cooling and Rayleigh friction, steadiness in wave magnitude is up to the second order, the waves have a long wave length, wave induced mean flows do not affect the waves, mean flows are steady, and dissipation mechanisms for the mean flows are the same as for the waves. Disturbance equations are formulated, along with Eulerian- and Lagrangian-mean flows, and the nonexistence of cross equatorial mean flows is demonstrated. Kelvin waves are shown to possess a Lagrangian-mean meridional circulation which is the same as the Eulerian-mean circulation. In the Boussinesq limit, however, neither the Eulerian- nor the Lagrangian-mean meridional circulations are caused by Kelvin waves. Further examination is made of Rossby-gravity waves and n = 1 westward propagating inertio-gravity waves.

Takahashi, M.↗

Turbulent Compressible Convection with Rotation: Mean Flows and Differential Rotation - 2

The effects of rotation on turbulent, compressible convection within stellar envelopes are studied through three-dimensional numerical simulations conducted within a local f-plane model. This work seeks to understand the types of differential rotation that can be established in convective envelopes of stars like the Sun, for which recent helioseismic observations suggest an angular velocity profile with depth and latitude at variance with many theoretical predictions. This paper analyzes the mechanisms that are responsible for the mean (horizontally averaged) zonal and meridional flows that are produced by convection influenced by Coriolis forces. The compressible convection is considered for a range of Rayleigh, Taylor, and Prandtl (and thus Rossby) numbers encompassing both laminar and turbulent flow conditions under weak and strong rotational constraints. When the nonlinearities are moderate, the effects of rotation on the resulting laminar cellular convection leads to distinctive tilts of the cell boundaries away from the vertical. These yield correlations between vertical and horizontal motions that generate Reynolds stresses that can drive mean flows, interpretable as differential rotation and meridional circulations. Under more vigorous forcing, the resulting turbulent convection involves complicated and contorted fluid particle trajectories, with few clear correlations between vertical and horizontal motions, punctuated by an evolving and intricate downflow network that can extend over much of the depth of the layer. Within such networks are some coherent structures of vortical downflow that tend to align with the rotation axis. These yield a novel turbulent alignment mechanism, distinct from the laminar tilting of cellular boundaries, that can provide the principal correlated motions and thus Reynolds stresses and subsequently mean flows. The emergence of such coherent structures that can persist amidst more random motions is a characteristic of turbulence with symmetries broken by rotation and stratification. Such structure is here found to play a crucial role in defining the mean zonal and meridional flows that coexist with the convection. Though they are subject to strong inertial oscillations, the strength and type of the mean flows are determined by a combination of the laminar tilting and the turbulent alignment mechanisms. Varying the parameters produces a wide range of mean motions. Among these, some turbulent solutions exhibit a mean zonal velocity profile that is nearly constant with depth, much as deduced by helioseismology at midlatitudes within the Sun. The solutions exhibit a definite handedness, with the direction of the persistent mean flows often prescribing a spiral with depth near the boundaries, also in accord with helioseismic deductions. The mean helicity has a profile that is positive in the upper portion of the domain and negative in the lower portion, a property bearing on magnetic dynamo processes that may be realized within such rotating layers of turbulent convection.

Brummell, Nicholas H.↗

Mean Ages of Stratospheric Air Derived From in Situ Observations of CO2, CH4, and N2O

Accurate mean ages for stratospheric air have been derived from a spatially and temporally comprehensive set of in situ observations of CO2, CH4, and N2O obtained from 1992 to 1998 from the NASA ER-2 aircraft and balloon flights. Errors associated with the tropospheric CO2 seasonal cycle and interannual variations in the CO2 growth rate are less than 0.5 year throughout the stratosphere and less than 0.3 year for air older than 2 years (N2O less than 275 ppbv), indicating that the age spectra are broad enough to attenuate these influences over the time period covered by these observations. The distribution of mean age with latitude and altitude provides detailed, quantitative information about the general circulation of the stratosphere. At 20 km, sharp meridional gradients in the mean age are observed across the subtropics. Between 20 and 30 km, the average difference in mean age between the tropics and midlatitudes is approximately 2 years, with slightly smaller differences at higher and lower altitudes. The mean age in the midlatitude middle stratosphere (approx. 25-32 km) is relatively constant with respect to altitude at 5 plus or minus 0.5 years. Comparison with earlier balloon observations of CO2 dating back to the 1970s indicates that the mean age of air in this region has remained within 11 year of its current value over the last 25 years. A climatology of mean age is derived from the observed compact relationship between mean age and N2O. These characteristics of the distribution of mean age in the stratosphere will serve as critically needed diagnostics for models of stratospheric transport.

Andrews, A. E.↗

MEANS User Documentation

MEANS is an acronym for the MIT Extensible Air Network Simulation. MIT is the Massachusetts Institute of Technology, where MEANS was developed. MEANS models the flow of aircraft in a simulation of the US National Airspace System. It can optionally follow the flow of passengers as well. The flight model takes the form of several queues through which the aircraft pass, as well as delays at certain times; the passengers can be transported via flights. MEANS is an event-based model. This means that events are scheduled at some point in the future, and once an event has executed, the simulation t h e advances to that of the next event. This is a different approach than some simulations (particularly those of physical systems), where time is advanced in fixed increments and the state of the system is updated at each step.This documentation is a "user guide" for MEANS - it describes how to USE means, not write new modules. For programming instructions, see the programming documentation, available as a separate document.This document assumse no programming knowledge. It will describe how to run MEANS, understand the data formats, and use such utility programs as already exist. For more detailed information on the internal workings of MEANS, and how to programmatically add to it, refer to the programming documentation.

Melconian, Terran↗

A Conjugate Study of Mean Winds and Planetary Waves Employing Enhanced Meteor Radars at Rio Grande, Argentina (53.8degS) and Juliusruh, Germany (54.6degN)

Two meteor radars with enhanced power and sensitivity and located at closely conjugate latitudes (54.6degN and 53.8degS) are employed for inter-hemispheric comparisons of mean winds and planetary wave structures. Our study uses data from June 2008 through May 2010 during which both radars provided nearly continuous wind measurements from approx.80 to 100 km. Monthly mean winds at 53.8degS exhibit a somewhat stronger westward mean zonal jet in spring and early summer at lower altitudes and no westward monthly mean winds at higher altitudes. In contrast, westward mean winds of approx.5-10 m/s at 54.6degN extend to above 96 km during late winter and early spring each year. Equatorward monthly mean winds extend approximately from spring to fall equinox at both latitudes, with amplitudes of approx.5-10 m/s and more rapid decreases in amplitude at 54.6degN at higher altitudes. Meridional mean winds are more variable at both latitudes during fall and winter, with both poleward and equatorward monthly means indicating longer-period variability. Planetary waves seen in the 2-day mean data are episodic and variable at both sites, exhibit dominant periodicities of approx.8-10 and 16-20 days and are more confined to late fall and winter at 54.6degN. At both latitudes, planetary waves in the two period bands coincide closely in time and exhibit similar horizontal velocity covariances that are positive (negative) at 54.6degN (53.8degS) during peak planetary wave responses.

Fritts, D. C.↗

Examination of Mean Stress Calculation Approaches in Rock Mechanics

The mean stress, as a fundamental statistical property of a group of stress data, is essential for stress variability characterisation. However, currently in rock mechanics, the mean stress is customarily and erroneously calculated by separately averaging the principal stress magnitudes and orientations. In order to draw the attention of our community to the appropriate approach for stress variability characterisation, here we compare the customary scalar/vector mean with that obtained by the mathematically rigorous tensorial approach—the Euclidean mean. Calculation of mean stress using both a small group of actual in situ stress measurement results and a large group of simulated stress data (obtained using the combined finite– discrete element method, FEMDEM) demonstrates that the two approaches yield different results. Further investigation of these results shows that the scalar/vector approach may yield non-unique and non-orthogonal mean principal stresses, and these may deviate significantly from those of the Euclidean mean. Our calculations and comparisons reveal that the scalar/ vector approach is deficient because it processes the principal stress magnitudes and orientations separately as independent quantities and ignores the connection between them. Conversely, the tensorial approach appropriately averages the tensors that simultaneously carry not only the information of stress magnitudes and orientations, but also the inherent relations between them. Therefore, arbitrarily using scalar/vector mean stress of in situ stress measurements as input in further rock engineering analyses may yield significantly erroneous results. Finally, we advise that stress data should be statistically processed in a tensorial manner using tensors referred to a common Cartesian coordinate system.

58 GEOSCIENCES↗

Mean-field diffusivities in passive scalar and magnetic transport in irrotational flows

Certain aspects of the mean-field theory of turbulent passive scalar transport and of mean-field electrodynamics are considered with particular emphasis on aspects of compressible fluids. It is demonstrated that the total mean-field diffusivity for passive scalar transport in a compressible flow may well be smaller than the molecular diffusivity. This is in full analogy to an old finding regarding the magnetic mean-field diffusivity in an electrically conducting turbulently moving compressible fluid. These phenomena occur if the irrotational part of the motion dominates the vortical part, the Peclet or magnetic Reynolds number is not too large, and, in addition, the variation of the flow pattern is slow. For both the passive scalar and the magnetic cases several further analytical results on mean-field diffusivities and related quantities found within the second-order correlation approximation are presented, as well as numerical results obtained by the test-field method, which applies independently of this approximation. Particular attention is paid to nonlocal and noninstantaneous connections between the turbulence-caused terms and the mean fields. Two examples of irrotational flows, in which interesting phenomena in the above sense occur, are investigated in detail. In particular, it is demonstrated that the decay of a mean scalar in a compressible fluid under the influence of these flows can be much slower than without any flow, and can be strongly influenced by the so-called memory effect, that is, the fact that the relevant mean-field coefficients depend on the decay rates themselves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Do cosmological perturbations have zero mean?

A central assumption in our analysis of cosmic structure is that cosmological perturbations have a constant ensemble mean, which can be set to zero by appropriate choice of the background. This property is one of the consequences of statistical homogeneity, the invariance of correlation functions under spatial translations. In this article we explore whether cosmological perturbations indeed have zero mean, and thus test one aspect of statistical homogeneity. We carry out a classical test of the zero mean hypothesis against a class of alternatives in which primordial perturbations have inhomogeneous non-vanishing means, but homogeneous and isotropic covariances. Apart from Gaussianity, our test does not make any additional assumptions about the nature of the perturbations and is thus rather generic and model-independent. The test statistic we employ is essentially Student's t statistic, applied to appropriately masked, foreground-cleaned cosmic microwave background anisotropy maps produced by the WMAP mission. We find evidence for a non-zero mean in a particular range of multipoles, but the evidence against the zero mean hypothesis goes away when we correct for multiple testing. We also place constraints on the mean of the temperature multipoles as a function of angular scale. On angular scales smaller than four degrees, a non-zero mean has to be at least an order of magnitude smaller than the standard deviation of the temperature anisotropies.

79 ASTRONOMY AND ASTROPHYSICS↗

On Social Optima of Non-Cooperative Mean Field Games

This paper studies the social optima in noncooperative mean-field games for a large population of agents with heterogeneous stochastic dynamic systems. Each agent seeks to maximize an individual utility functional, and utility functionals of different agents are coupled through a mean field term that depends on the mean of the population states/controls. The paper has the following contributions. First, we derive a set of control strategies for the agents that possess *-Nash equilibrium property, and converge to the mean-field Nash equilibrium as the population size goes to infinity. Second, we study the social optimal in the mean field game. We derive the conditions, termed the socially optimal conditions, under which the *-Nash equilibrium of the mean field game maximizes the social welfare. Third, a primal-dual algorithm is proposed to compute the *-Nash equilibrium of the mean field game. Since the *-Nash equilibrium of the mean field game is socially optimal, we can compute the equilibrium by solving the social welfare maximization problem, which can be addressed by a decentralized primal-dual algorithm. Numerical simulations are presented to demonstrate the effectiveness of the proposed approach.

Li, Sen↗

Interactions Between Climate Mean and Variability Drive Future Agroecosystem Vulnerability

ABSTRACT Agriculture is crucial for global food supply and dominates the Earth's land surface. It is unknown, however, how slow but relentless changes in climate mean state, versus random extreme conditions arising from changing variability , will affect agroecosystems' carbon fluxes, energy fluxes, and crop production. We used an advanced weather generator to partition changes in mean climate state versus variability for both temperature and precipitation, producing forcing data to drive factorial‐design simulations of US Midwest agricultural regions in the Energy Exascale Earth System Model. We found that an increase in temperature mean lowers stored carbon, plant productivity, and crop yield, and tends to convert agroecosystems from a carbon sink to a source, as expected; it also can cause local to regional cooling in the earth system model through its effects on the Bowen Ratio. The combined effect of mean and variability changes on carbon fluxes and pools was nonlinear, that is, greater than each individual case. For instance, gross primary production reduces by 9%, 1%, and 13% due to change in mean temperature, change in temperature variability, and change in both temperature mean and variability, respectively. Overall, the scenario with change in both temperature and precipitation means leads to the largest reduction in carbon fluxes (−16% gross primary production), carbon pools (−35% vegetation carbon), and crop yields (−33% and −22% median reduction in yield for corn and soybean, respectively). By unambiguously parsing the effects of changing climate mean versus variability and quantifying their nonadditive impacts, this study lays a foundation for more robust understanding and prediction of agroecosystems' vulnerability to 21st‐century climate change.

54 ENVIRONMENTAL SCIENCES↗