SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Development of magnetic probe for nondestructive testing of multilayer printed circuit boards to determine existence of opens or shorts is reported. Components of probe are described and procedures for operation are discussed. Two illustrations are provided to show magnetic circuits and principles of operation.
Abstract Understanding the stability limitations and defect formation mechanisms in 2D magnets is essential for their utilization in spintronic and memory technologies. Here, defects in mono‐ to multilayer CrSBr are correlated with structural, vibrational, and magnetic properties. Resonant Raman scattering is used to reveal distinct vibrational defect signatures. In pristine CrSBr, it is shown that bromine atoms mediate vibrational interlayer coupling, allowing for distinguishing between surface and bulk defect modes. Environmental exposure is shown to cause drastic degradation in monolayers, with the formation of intralayer defects. This is in contrast to multilayers that predominantly show bromine surface defects. Through deliberate ion irradiation, the formation of defect modes is tuned: these are strongly polarized and resonantly enhanced, reflecting the quasi‐‐1D electronic character of CrSBr. Strikingly, pronounced signatures of spin‐phonon coupling of the intrinsic phonon modes and the ion beam‐induced defect modes are observed throughout the magnetic transition temperature. Overall, defect engineering of magnetic properties is possible, with resonant Raman spectroscopy serving as a direct fingerprint of magnetic phases and defects in CrSBr.
Recent experiments on rhombohedral pentalayer graphene with a substrate-induced moiré potential have identified both Chern insulators and fractional quantum Hall states at zero magnetic field. Surprisingly, these states are observed in strong displacement fields where the effects of the moiré lattice are weak, and seem to be readily accessed without fine-tuning. To address these experimental puzzles, we study a model of interacting electrons in this geometry. Within self-consistent Hartree-Fock (SCHF) calculations, we find an isolated Chern band with small bandwidth and good quantum geometry. Exact diagonalization and density-matrix renormalization group calculations both confirm the band hosts fractional quantum Hall states without a magnetic field. Remarkably, the Chern band is stable at a wide range of angles, at four through six rhombohedral layers, at varying rhombohedral hopping parameters, and—most strikingly—survives in SCHF calculations when the moiré potential vanishes. In this limit, the state spontaneously breaks time-reversal and translation symmetry simultaneously, giving a topological crystalline state that we term the “anomalous Hall crystal.” We argue this is a general mechanism to create stable Chern bands in rhombohedral multilayer graphene, opening the door to studying the interplay between electronic topology, fractionalization, and spontaneous translation symmetry breaking.
The La 0.7 Sr 0.3 CoO 3–δ /La 0.7 Sr 0.3 MnO 3–δ (LSCO/LSMO) bilayer system is an ideal perovskite oxide platform for investigating interface reconstruction and its effect on their magnetic properties. Previous studies have shown that LSCO can separate into magnetic sublayers, which possess distinct trends as the total LSCO thickness increases. Here, we used polarized neutron reflectometry to quantify changes in the magnetic and chemical depth profiles, and it confirms the formation of ~12 Å-thick interfacial LSCO and LSMO layers, characterized by a decreased nuclear scattering length density compared to the bulk of the layers. This decrease is attributed to the combined effects of oxygen vacancy formation and interfacial charge transfer, which lead to magnetically active Co 2+ ions with ionic radii larger than the Co 3+ /Co 4+ ions typically found in bulk LSCO or single-layer films. The interfacial magnetization values, as well as Co 2+ ion and oxygen vacancy concentrations, depend strongly on the LSCO layer thickness. These results highlight the sensitive interplay of the cation valence states, oxygen vacancy concentration, and magnetization at interfaces in perovskite oxide multilayers, demonstrating the potential to tune their functional properties via careful design of their structure.
A rolled-up electromagnetic component for on-chip applications comprises: a multilayer sheet in a rolled configuration comprising at least one turn about a longitudinal axis; a core defined by a first turn of the rolled configuration; and a soft magnetic material disposed within the core, where the multilayer sheet comprises a conductive pattern layer on a strain-relieved layer. A method of making a rolled-up electromagnetic component for on-chip applications includes forming a rolled-up device comprising: a multilayer sheet in a rolled configuration having at least one turn about a longitudinal axis, where the multilayer sheet comprises a conductive pattern layer on a strain-relieved layer; and a core defined by a first turn of the rolled configuration. The method further includes introducing a soft magnetic material into the core.
Ultrafast interaction between the femtosecond laser pulse and the magnetic metal provides an efficient way to manipulate the magnetic states of matter. Numerous experimental advancements have been made on multilayer metallic films in the last two decades. However, the underlying physics remains unclear. Here, relying on an efficient ab initio spin dynamics simulation algorithm, we revealed the physics that can unify the progress in different experiments. We found that light-induced ultrafast spin transport in multilayer metallic films originates from the sp - d spin-exchange interaction, which can induce an ultrafast, large, and pure spin current from ferromagnetic metal to nonmagnetic metal without charge carrier transport. The resulting trends of spin demagnetization and spin flow are consistent with most experiments. It can explain a variety of ultrafast light-spin manipulation experiments with different systems and different pump-probe technologies, covering a wide range of work in this field.
Motivated by the possibility of enhanced magnetic fluctuations in exfoliated α-RuCl 3 flakes, we study magneto-Raman spectra of exfoliated multilayer α-RuCl 3 in out-of-plane magnetic fields of -6 to 6 T at temperatures of 670 mK to 4 K. While the literature currently suggests that bulk α-RuCl 3 is in an antiferromagnetic zigzag phase with R$\bar3$ symmetry at low temperatures, we do not observe R$\bar3$ symmetry in exfoliated α-RuCl 3 at low temperatures. While we saw no magnetic field-driven transitions, the Raman modes exhibit unexpected stochastic shifts in response to the applied magnetic field that are above the uncertainties inferred from Bayesian analysis. Finally, these stochastic shifts are consistent with the emergence of magnetostrictive interactions in exfoliated α-RuCl 3 .
The discovery of 2-dimensional (2D) materials, such as CrI 3 , that retain magnetic ordering at monolayer thickness has resulted in a surge of both pure and applied research in 2D magnetism. Here, we report a magneto-Raman spectroscopy study on multilayered CrI 3 , focusing on two additional features in the spectra that appear below the magnetic ordering temperature and were previously assigned to high frequency magnons. Instead, we conclude these modes are actually zone-folded phonons. We observe a striking evolution of the Raman spectra with increasing magnetic field applied perpendicular to the atomic layers in which clear, sudden changes in intensities of the modes are attributed to the interlayer ordering changing from antiferromagnetic to ferromagnetic at a critical magnetic field. Our work highlights the sensitivity of the Raman modes to weak interlayer spin ordering in CrI 3 .
In this work, we report measurements of current-induced thermoelectric and spin-orbit torque effects within devices in which multilayers of the semiconducting 2-dimensional van der Waals magnet Cr 2 Ge 2 Te 6 (CGT) are integrated with Pt and Ta metal overlayers. We show that the magnetic orientation of the CGT can be detected accurately either electrically (using an anomalous Hall effect) or optically (using magnetic circular dichroism) with good consistency. The samples exhibit large thermoelectric effects, but nevertheless the spin-orbit torque can be measured quantitatively using the angle-dependent second harmonic Hall technique. For CGT/Pt we measure the spin-orbit torque efficiency to be similar to conventional metallic-ferromagnet/Pt devices with the same Pt resistivity. The interfacial transparency for spin currents is therefore similar in both classes of devices. Our results demonstrate the promise of incorporating semiconducting 2D magnets within spin-orbitronic and magneto-thermal devices.
The suggestion that non-reciprocal critical current (NRC) may be an intrinsic property of non-centrosymmetric superconductors has generated renewed theoretical and experimental interest motivated by an analogy with the non-reciprocal resistivity due to the magnetochiral effect in uniform materials with broken spatial and time-reversal symmetry. Theoretically it has been understood that terms linear in the Cooper pair momentum do not contribute to NRC, although the role of higher-order terms remains unclear. In this work we show that critical current non-reciprocity is a generic property of multilayered superconductor structures in the presence of magnetic field-generated diamagnetic currents. In the regime of an intermediate coupling between the layers, the Josephson vortices are predicted to form at high fields and currents. Experimentally, we report the observation of NRC in nanowires fabricated from InAs/Al heterostructures. The effect is independent of the crystallographic orientation of the wire, ruling out an intrinsic origin of NRC. Non-monotonic NRC evolution with magnetic field is consistent with the generation of diamagnetic currents and formation of the Josephson vortices. This extrinsic NRC mechanism can be used to design novel devices for superconducting circuits.
Electron transport driven by the phase coherence and interference of quantum many-body wavefunctions is a fascinating phenomenon with potential technological significance. Superconductivity, for example, enables dissipationless transport through macroscopic phase twisting, while charge-density waves show broadband noise and AC-DC interference once their phase is depinned. We identify an analogous phase-coherent dynamics in the intervalley-coherent (IVC) state frequently observed in rhombohedral multilayer graphene. We show that a static magnetic field drives an oscillating intervalley current, which produces an oscillating orbital magnetization and thereby a detectable AC Hall response. This mechanism is similar to the Josephson effect observed in superconductors but now happening in momentum space. In this analogy, the static magnetic field acts as the DC voltage, while the oscillating intervalley current is the AC Josephson current. We provide microscopic calculations of all the phase-number free-energy parameters in rhombohedral trilayer graphene, establishing this effect as an experimental signature of IVC order.
The paper discusses theoretical considerations and presents the observational parameters for the development of reflective FUV coronagraph/polarimeter and EUV imaging polarimeter instruments. New EUV/FUV polarimeter instrument concepts for solar research are described. One of these is a new coronagraph/polarimeter operating at 1215.6 A, which could observe the neutral hydrogen Ly-alpha line in the near solar corona and lead to the first direct measurements of both the strength and the direction of coronal magnetic fields. The other is a new multilayer EUV imaging polarimeter, operating at the wavelengths of strong He emission lines, which could observe impact polarization phenomena and provide information concerning the relative importance of thermal and nonthermal processes in solar flares.
Langley Research Center s Soluble Imide (LaRC-SI) was discovered by accident. While researching resins and adhesives for advanced composites for high-speed aircraft, Robert Bryant, a Langley engineer, noticed that one of the polymers he was working with did not behave as predicted. After putting the compound through a two-stage controlled chemical reaction, expecting it to precipitate as a powder after the second stage, he was surprised to see that the compound remained soluble. This novel characteristic ended up making this polymer a very significant finding, eventually leading Bryant and his team to win several NASA technology awards, and an "R&D 100" award. The unique feature of this compound is the way that it lends itself to easy processing. Most polyimides (members of a group of remarkably strong and incredibly heat- and chemical-resistant polymers) require complex curing cycles before they are usable. LaRC-SI remains soluble in its final form, so no further chemical processing is required to produce final materials, like thin films and varnishes. Since producing LaRC-SI does not require complex manufacturing techniques, it has been processed into useful forms for a variety of applications, including mechanical parts, magnetic components, ceramics, adhesives, composites, flexible circuits, multilayer printed circuits, and coatings on fiber optics, wires, and metals. Bryant s team was, at the time, heavily involved with the aircraft polymer project and could not afford to further develop the polymer resin. Believing it was worth further exploration, though, he developed a plan for funding development and submitted it to Langley s chief scientist, who endorsed the experimentation. Bryant then left the high-speed civil transport project to develop LaRC-SI. The result is an extremely tough, lightweight thermoplastic that is not only solvent-resistant, but also has the ability to withstand temperature ranges from cryogenic levels to above 200 C. The thermoplastic s unique characteristics lend it to many commercial applications; uses that Bryant believed would ultimately benefit industry and the Nation. "LaRC-SI," he explains, "is a product created in a government laboratory, funded with money from the tax-paying public. What we discovered helps further the economic competitiveness of the United States, and it was our goal to initiate the technology transfer process to ensure that our work benefited the widest range of people." Several NASA centers, including Langley, have explored methods for using LaRC-SI in a number of applications from radiation shielding and as an adhesive to uses involving replacement of conventional rigid circuit boards. In the commercial realm, LaRC-SI can now be found in several commercial products, including the thin-layer composite unimorph ferroelectric driver and sensor (THUNDER) piezoelectric actuator, another "R&D 100" award winner (Spinoff 2005).
Ultrafast control of the magnetization in ps timescales by fs laser pulses offers an attractive avenue for applications such as fast magnetic devices for logic and memory. However, ultrafast helicity-independent all-optical switching (HI-AOS) of the magnetization has thus far only been observed in Gd-based, ferrimagnetic amorphous (a-) rare earth-transition metal (a-RE-TM) systems, and a comprehensive understanding of the reversal mechanism remains elusive. Here, we report HI-AOS in ferrimagnetic a-Gd 22-x Tb x Co 78 thin films, from x=0 to 18, and elucidate the role of Gd in HI-AOS in a-RE-TM alloys and multilayers. Increasing Tb content results in increasing perpendicular magnetic anisotropy and coercivity, without modifying magnetization density, and slower remagnetization rates and higher critical fluences for switching but still shows picosecond HI-AOS. Simulations of the atomistic spin dynamics based on the two-temperature model reproduce these results qualitatively and predict that the lower damping on the RE sublattice arising from the small spin-orbit coupling of Gd (with L=0) is instrumental for the faster dynamics and lower critical fluences of the Gd-rich alloys. Annealing a-Gd 10 Tb 12 Co 78 leads to slower dynamics which we argue is due to an increase in damping. These simulations strongly indicate that accounting for element-specific damping is crucial in understanding HI-AOS phenomena. The results suggest that engineering the element-specific damping of materials can open up new classes of materials that exhibit low-energy, ultrafast HI-AOS.
Superconducting Radio Frequency (SRF) cavities used in particle accelerators are typically formed from or coated with superconducting materials. Currently high purity niobium is the material of choice for SRF cavities which have been optimized to operate near their theoretical field limits. This brings about the need for significant R&D efforts to develop next generation superconducting materials which could outperform Nb and keep up with the demands of new accelerator facilities. To achieve high quality factors and accelerating gradients, the cavity material should be able to remain in the superconducting Meissner state under high RF magnetic field without penetration of quantized magnetic vortices through the cavity wall. Therefore, the magnetic field at which vortices penetrate in a supercon- ductor is one of the key parameters of merit of SRF cavities. Techniques to measure the onset of magnetic field penetration on thin film samples need to be developed to mitigate the issues with the conventional magnetometry measurements which are strongly influenced by the film orientation and shape and edge effects. The applied magnetic field is also needed to be parallel to the one side of the superconductor to resemble the magnetic field profile at the surface of the SRF cavities operating at fundamental accelerating mode. In this work we report the development of an experimental setup called Magnetic Field Penetration (MFP) magnetometer to measure the field of full flux penetration through bulk, thin films and multilayered superconductors. Our system combines a small superconducting solenoid which can generate the magnetic field up to 500 mT at the sample surface and three Hall probes to detect the full flux penetration through the planner superconductor with 2 inch diameter. This setup was used to study alternative materials which could potentially outperform niobium, as well as SIS multilayer coatings on niobium.
When single-layer h-BN is subjected to a high-energy electron beam, triangular pores with nitrogen edges are formed. Because of the broken sp 2 bonds, these pores are known to possess magnetic states. Here, we report on the magnetism and electronic structure of triangular pores as a function of their size. Moreover, in the Bernal-stacked h-BN (AB-h-BN), multilayer pores with parallel edges can be created, which is not possible in the commonly fabricated multilayer AA'-h-BN. Given that these pores can be manufactured in a well-controlled fashion using an electron beam, it is important to understand the interactions of pores in neighboring layers. We find that in certain configurations, the edges of the neighboring pores remain open and retain their magnetism, and in others, they form interlayer bonds. We present a comprehensive report on these configurations for small nanopores. We find that at low temperatures, these pores have near degenerate magnetic configurations, and may be utilized in magnetoresistance and spintronics applications. In the process of forming larger multilayer nanopores, interlayer bonds can form, reducing the magnetization. Yet, unbonded parallel multilayer edges remain available at all sizes. Understanding these pores is also helpful in a multitude of applications such as DNA sequencing and quantum emission.
A reduction-based manufacturing process for creating technologically important multilayer structures from lattice-matched ferromagnetic insulators and ferromagnetic conductors is reported. The process is demonstrated by growing a permanently magnetized double-layer structure, consisting of lattice-matched conducting (Ni,Co) and insulating (Ni 0.4 Co 0.6 ) 3 O 3 layers, through a single deposition cycle. The orientation of the metal cation network is preserved after reduction. Close-packing displacements of Ni and Co take place in such a manner that the in-plane hexagonal arrangement is preserved. This is critical for ensuring high-quality interfaces joining the layers. At room temperature the hysteresis loop is centered. At low temperature the oxide layer becomes ferrimagnetically ordered, accompanied by a shift of the hysteresis loop along the magnetic field axis. The shift is assigned to exchange bias phenomenon. Biaxial compressive strain is responsible for the required ferrimagnetic ordering. Finally, spin valves and closely related magnetoresistance random access memory and spin-transfer-torque magnetic random access memory devices are addressed as potential applications.
Antiferromagnetically (AFM) coupled skyrmions offer potential advantages for spintronic devices, including reduced dipolar fields that may enable smaller skyrmion sizes and a reduction of the skyrmion Hall effect. However, the topological stability of AFM-coupled skyrmions subjected to dramatic spin deformation through low-temperature cycling has not been investigated. We report the discovery of a topological spin memory effect for AFM-coupled skyrmion pairs in [Co/Gd/Pt](10) multilayered films. Photoemission electron microscopy imaging shows that bubble skyrmions in the multilayer that are stable at room temperature evolve into complex in-plane spin textures as the temperature is lowered and reform completely when the sample is warmed back up. Simulations demonstrate that Dzyaloshinskii-Moriya interactions play a key role in this spin memory effect, and furthermore reveal that the topological charge is preserved throughout the dramatic spin texture rearrangement and recovery. These results highlight a key aspect of topological protection-the preservation of the topological properties under continuous deformation-and also provide a promising avenue for information encryption and recovery.