Measurement of log-amplitude variance.
Log amplitude variance calculation methods compared in statistics of optical scintillation by application to measurements with laser
Bufton, J. L.↗
SEARCH · Engineering Papers
Results for “logging”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Log-linear companding - A digital companding technique.
Digital log-linear companding technique for nonuniform quantization of speech and image signals
Apple, G. G., Jr.↗
New materials for fireplace logs
Fibrous insulation and refractory concrete are used for logs as well as fireproof walls, incinerator bricks, planters, and roof shingles. Insulation is lighter and more shock resistant than fireclay. Lightweight slag bonded with refractory concrete serves as aggregrate.
Kieselback, D. J.↗
Apollo 16 (Descartes) landing site road log
The landing site traverse log is presented for the Apollo 16 mission. EVA's 1, 2, and 3 are included.
Boudette, E. L.↗
The log-periodic array at the Clark Lake Radio Observatory
A log-periodic array, 3 km in length, is operating at Clark Lake Radio Observatory. It makes one-dimensional sweeps of the solar brightness distribution in the frequency range 20 to 65 MHz once per sec. The phasing of the array and the receiving system are described, as well as how the dynamic spectra are analyzed for the positions of solar radio sources. Simultaneous measurements at many frequencies enable the observer to remove the effects of ionospheric refraction and to obtain fundamental positions to an accuracy of about one arc min at decametric wavelengths. Fundamental positions are given for Cassiopeia A.
Erickson, W. C.↗
MAIL LOG, program theory, volume 2
Information relevant to the MAIL LOG program theory is documented. The L-files for mail correspondence, design information release/report, and the drawing/engineering order are given. In addition, sources for miscellaneous external routines and special support routines are documented along with a glossary of terms.
Harris, D. K.↗
Experimental study of main rotor tip geometry and tail rotor interactions in hover. Volume 2: Run log and tabulated data
A model scale hover test was conducted in the Sikorsky Aircraft Model Rotor hover Facility to identify and quantify the impact of the tail rotor on the demonstrated advantages of advanced geometry tip configurations. The existence of mutual interference between hovering main rotor and a tail rotor was acknowledged in the test. The test was conducted using the Basic Model Test Rig and two scaled main rotor systems, one representing a 1/5.727 scale UH-60A BLACK HAWK and the others a 1/4.71 scale S-76. Eight alternate rotor tip configurations were tested, 3 on the BLACK HAWK rotor and 6 on the S-76 rotor. Four of these tips were then selected for testing in close proximity to an operating tail rotor (operating in both tractor and pusher modes) to determine if the performance advantages that could be obtained from the use of advanced geometry tips in a main rotor only environment would still exist in the more complex flow field involving a tail rotor. This volume contains the test run log and tabulated data.
Balch, D. T.↗
Tolerance bounds for log gamma regression models
The present procedure for finding lower confidence bounds for the quantiles of Weibull populations, on the basis of the solution of a quadratic equation, is more accurate than current Monte Carlo tables and extends to any location-scale family. It is shown that this method is accurate for all members of the log gamma(K) family, where K = 1/2 to infinity, and works well for censored data, while also extending to regression data. An even more accurate procedure involving an approximation to the Lawless (1982) conditional procedure, with numerical integrations whose tables are independent of the data, is also presented. These methods are applied to the case of failure strengths of ceramic specimens from each of three billets of Si3N4, which have undergone flexural strength testing.
Jones, R. A.↗
The relations between the linear and bilinear atmospheric tidal fields in geometric height and in log-pressure coordinates
Theoretical models of planetary-atmosphere tidal fields are examined analytically, comparing models based on geometric-height coordinates with those employing log-pressure coordinates. The relationship between the linearized meteorological variables in the two systems is explored for classical tidal theory and its reduction to the Laplace tidal equation, and it is shown that identical horizontal and vertical equations are obtained. Also considered are the tidal zonal-mean bilinear flux convergences and their Eliassen-Palm formulations. Numerical results for problems involving the earth and Mars atmospheres are presented in graphs and discussed.
Zurek, Richard W.↗
An O(log sup 2 N) parallel algorithm for computing the eigenvalues of a symmetric tridiagonal matrix
An O(log sup 2 N) parallel algorithm is presented for computing the eigenvalues of a symmetric tridiagonal matrix using a parallel algorithm for computing the zeros of the characteristic polynomial. The method is based on a quadratic recurrence in which the characteristic polynomial is constructed on a binary tree from polynomials whose degree doubles at each level. Intervals that contain exactly one zero are determined by the zeros of polynomials at the previous level which ensures that different processors compute different zeros. The exact behavior of the polynomials at the interval endpoints is used to eliminate the usual problems induced by finite precision arithmetic.
Swarztrauber, Paul N.↗
Remote semi-continuous flow rate logging seepage meter
The movement of groundwater and its associated solutes from upland regions was implicated in the degradation of receiving surface water bodies. Current efforts to directly measure this influx of water incorporate manually operated seepage meters which are hindered by severe limitations. A prototype seepage meter was developed by NASA Langley Research Center and Virginia Polytechnic Institute and State University that will allow for the semi-continuous collection and data logging of seepage flux across the sediment water interface. The meter is designed to operate at depths to 40 meters, and alleviate or minimize all disadvantages associated with traditional methods while remaining cost effective. The unit was designed to operate independently for time periods on the order of weeks with adjustable sample sequences depending upon hydrologic conditions. When used in conjunction with commercially available pressure transducers, this seepage meter allows for correlations to be made between groundwater discharge and tidal/sea state conditions in coastal areas. Field data from the Chesapeake Bay and Florida Bay systems are presented.
Reay, William G.↗
A Planar Approximation for the Least Reliable Bit Log-likelihood Ratio of 8-PSK Modulation
The optimum decoding of component codes in block coded modulation (BCM) schemes requires the use of the log-likelihood ratio (LLR) as the signal metric. An approximation to the LLR for the least reliable bit (LRB) in an 8-PSK modulation based on planar equations with fixed point arithmetic is developed that is both accurate and easily realizable for practical BCM schemes. Through an error power analysis and an example simulation it is shown that the approximation results in 0.06 dB in degradation over the exact expression at an E(sub s)/N(sub o) of 10 dB. It is also shown that the approximation can be realized in combinatorial logic using roughly 7300 transistors. This compares favorably to a look up table approach in typical systems.
Thesling, William H.↗
On the Use of the Log-Normal Particle Size Distribution to Characterize Global Rain
Although most parameterizations of the drop size distributions (DSD) use the gamma function, there are several advantages to the log-normal form, particularly if we want to characterize the large scale space-time variability of the DSD and rain rate. The advantages of the distribution are twofold: the logarithm of any moment can be expressed as a linear combination of the individual parameters of the distribution; the parameters of the distribution are approximately normally distributed. Since all radar and rainfall-related parameters can be written approximately as a moment of the DSD, the first property allows us to express the logarithm of any radar/rainfall variable as a linear combination of the individual DSD parameters. Another consequence is that any power law relationship between rain rate, reflectivity factor, specific attenuation or water content can be expressed in terms of the covariance matrix of the DSD parameters. The joint-normal property of the DSD parameters has applications to the description of the space-time variation of rainfall in the sense that any radar-rainfall quantity can be specified by the covariance matrix associated with the DSD parameters at two arbitrary space-time points. As such, the parameterization provides a means by which we can use the spaceborne radar-derived DSD parameters to specify in part the covariance matrices globally. However, since satellite observations have coarse temporal sampling, the specification of the temporal covariance must be derived from ancillary measurements and models. Work is presently underway to determine whether the use of instantaneous rain rate data from the TRMM Precipitation Radar can provide good estimates of the spatial correlation in rain rate from data collected in 5(sup 0)x 5(sup 0) x 1 month space-time boxes. To characterize the temporal characteristics of the DSD parameters, disdrometer data are being used from the Wallops Flight Facility site where as many as 4 disdrometers have been used to acquire data over a 2 km path. These data should help quantify the temporal form of the covariance matrix at this site.
Meneghini, Robert↗
New Factorization Techniques and Parallel (log N) Algorithms for Forward Dynamics Solution of Single Closed-Chain Robot Manipulators
In this paper parallel 0(log N) algorithms for dynamic simulation of single closed-chain rigid multibody system as specialized to the case of a robot manipulatoar in contact with the environment are developed.
Factorization Techniques↗
Flow rate logging seepage meter
An apparatus for remotely measuring and logging the flow rate of groundwater seepage into surface water bodies. As groundwater seeps into a cavity created by a bottomless housing, it displaces water through an inlet and into a waterproof sealed upper compartment, at which point, the water is collected by a collection bag, which is contained in a bag chamber. A magnet on the collection bag approaches a proximity switch as the collection bag fills, and eventually enables the proximity switch to activate a control circuit. The control circuit then rotates a three-way valve from the collection path to a discharge path, enables a data logger to record the time, and enables a pump, which discharges the water from the collection bag, through the three-way valve and pump, and into the sea. As the collection bag empties, the magnet leaves the proximity of the proximity switch, and the control circuit turns off the pump, resets the valve to provide a collection path, and restarts the collection cycle.
Reay, William G.↗
Calibration Tests of a German Log Rodmeter
A German log rodmeter of the pitot static type was calibrated in Langley tank no. 1 at speeds up to 34 knots and angles of yaw from 0 deg to plus or minus 10 3/4 degrees. The dynamic head approximated the theoretical head at 0 degrees yaw but decreased as the yaw was increased. The static head was negative and in general became more negative with increasing speed and yaw. Cavitation occurred at speeds above 31 knots at 0 deg yaw and 21 knots at 10 3/4 deg yaw.
Mottard, Elmo J.↗
Calibration Tests of a Japanese Log Rodmeter
A Japanese log rodmeter of the rotating-vane impeller type, with a co mmutator on the impeller shaft, was calibrated in Langley tank no. 1. The rotational speed of two impellers was determined for forward speeds up to 24 knots at angles of yaw up to ?10 0 . In general, the rota tional speeds of two apparently identical impellers tested in the rod meter decreased with increasing yaw angle, right yaw causing a greate r decrease than left yaw. The difference in calibration between the t wo impellers was approximately the same as that produced by a change in yaw angle from 50 left to 50 right. Evidence of cavitation within the impeller fairing appeared at speeds above 24 knots.
Mottard, Elmo J.↗
Data Mining of Network Logs
The statement of purpose is to analyze network monitoring logs to support the computer incident response team. Specifically, gain a clear understanding of the Uniform Resource Locator (URL) and its structure, and provide a way to breakdown a URL based on protocol, host name domain name, path, and other attributes. Finally, provide a method to perform data reduction by identifying the different types of advertisements shown on a webpage for incident data analysis. The procedures used for analysis and data reduction will be a computer program which would analyze the URL and identify and advertisement links from the actual content links.
Collazo, Carlimar↗