Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “link layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Finite Element Modeling of the Phase Change in Thermally-Grown SiO 2 in SiC Systems for Gas Turbines

The operating lifetimes of SiC-based components in combustion environments are directly linked to the adhesion of the protective environmental barrier coating (EBC) layer. One of the major known failure modes for EBCs is the formation of a thick SiO 2 thermally grown oxide (TGO), which decreases coating adhesion and encourages eventual coating spallation. The effect of the TGO thickness under Yb 2 Si 2 O 7 EBCs on silicon carbide was investigated using finite element models (FEMs) with various interfacial architectures and SiO 2 TGO thicknesses. Further, the FEMs incorporated a user-defined material to simulate the volume contraction of the TGO during the silica phase transformation from β-cristobalite to α-cristobalite upon cooling from the stress-free state at 1350°C to room temperature. Systems with and without a silicon bond coating intermediary layer were assessed. It was shown that the TGO phase transformation stress (1.6–1.7 GPa) dominated the increase in stress in the TGO and EBC layers. Furthermore, it was found that stress increase in the TGO was independent of TGO thickness and interface geometry. These results indicate that stabilization of the TGO to mitigate the phase transformation could dramatically improve the performance of SiC-base components with EBCs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure evolution and tin redistribution during oxidation of Zircaloy-4 at 500°C

Zirconium (Zr) alloys are widely used as fuel cladding in nuclear power reactors due to their thermal stability, mechanical durability, corrosion resistance, and low neutron absorption cross-section. However, their performance is challenged by oxidation in reactor environments, making the study of Zr alloy corrosion behavior crucial for ensuring the safety, longevity, and economic viability of nuclear power systems. While the oxidation behavior of Zr-based cladding materials has been extensively studied since the 1950s, a mechanistic understanding into the relationship between structure evolution, solute element redistribution, and properties remains elusive. Valuable insights may be obtained through advanced experimental methods, such as in-situ and high resolution microscopy techniques. Here, in this study, the oxidation behavior of Zircaloy-4 at 500 °C in O 2 is characterized using a multimodal advanced characterization approach. Using in-situ X-ray diffraction, the phase evolution from metastable to stable oxides is tracked in real time. Complementary high-resolution techniques, including electron microscopy and atom probe tomography, reveal nanoscale insights into the microstructural changes and solute redistribution across the oxide/metal interface. Nanohardness mapping across the oxide/metal interface highlights localized mechanical property variations that may be linked to changes in microstructure and crystal structure within the oxide layer. These findings offer valuable insights into the microstructure and property evolution of Zircaloy-4 during oxidation, contributing to a better understanding of microstructural changes in Zr-based alloys under oxidative environments.

APT↗
DOE OSTI2020

Development of a FELIX based readout system for ITk strip hybrid module demonstrator for ATLAS Phase-II Upgrade

The Large Hadron Collider (LHC) will undergo a major upgrade around 2024 with a roughly tenfold increase in luminosity. It results in corresponding increases in particle rates and radiation doses that the current ATLAS Inner Tracking Detector cannot cope with. Therefore the ATLAS experiment will build a new all-silicon tracking system called the ITk (Inner Tracker) that includes an inside pixel detector close to the beam line and a strip detector in outside layer. Meanwhile the ATLAS experiment will adopt the Front-End Link eXchange (FELIX) system as the interface between the data acquisition and front-end electronics for all sub-detectors in the Phase II Upgrade. In this contribution, we present a prototype of FELIX based readout system for the strip hybrid module. Its hardware, firmware and software GUI application will be discussed, as well as integration test results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

4D Printing via an Unconventional Fused Deposition Modeling Route to High-Performance Thermosets

An unprecedented four-dimensional (4D) printing process allowing high-performance and shape memory thermoset to be printed, for the first time, by fused deposition modeling (FDM) with isotropic properties has been achieved. Here, bisphenol A-based epoxy and benzoxazine were formulated to a low-temperature thermoplastic and high-temperature thermoset resin, which is melt-extrudable and can be postcured into covalently cross-linked material. Carbon nanotube (CNT) was added in the resin to work as both mechanical enhancement filler and rheology modifier to prevent shape deformation during postcuring process. The cross-layer reaction fuses individual layers into an integrity, thus eliminating layer delamination induced by FDM, offering isotropic mechanical properties regardless of the printing orientations. The highly cross-linked network provides outstanding mechanical strength and superb thermal stability. The excellent shape memory performance with fast recovery rate and large recovery degree is also obtained in the three-dimensional (3D) printed composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Subcloud and Cloud-Base Latent Heat Fluxes during Shallow Cumulus Convection

Doppler and Raman lidar observations of vertical velocity and water vapor mixing ratio are used to probe the physics and statistics of subcloud and cloud-base latent heat fluxes during cumulus convection at the ARM Southern Great Plains (SGP) site in Oklahoma, United States. The statistical results show that latent heat fluxes increase with height from the surface up to ~0.8 Z i (where Z i is the convective boundary layer depth) and then decrease to ~0 at Z i . Peak fluxes aloft exceeding 500 W m −2 are associated with periods of increased cumulus cloud cover and stronger jumps in the mean humidity profile. These entrainment fluxes are much larger than the surface fluxes, indicating substantial drying over the 0–0.8 Z i layer accompanied by moistening aloft as the CBL deepens over the diurnal cycle. We also show that the boundary layer humidity budget is approximately closed by computing the flux divergence across the 0–0.8 Z i layer. Composite subcloud velocity and water vapor anomalies show that clouds are linked to coherent updraft and moisture plumes. The moisture anomaly is Gaussian, most pronounced above 0.8 Z i and systematically wider than the velocity anomaly, which has a narrow central updraft flanked by downdrafts. This size and shape disparity results in downdrafts characterized by a high water vapor mixing ratio and thus a broad joint probability density function (JPDF) of velocity and mixing ratio in the upper CBL. We also show that cloud-base latent heat fluxes can be both positive and negative and that the instantaneous positive fluxes can be very large (~10 000 W m −2 ). However, since cloud fraction tends to be small, the net impact of these fluxes remains modest.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Glass-fiber-reinforced polymeric film as an efficient protecting layer for stable Li metal electrodes

With numerous reports on protecting films for stable lithium (Li) metal electrodes, the key attributes for how to construct these efficient layers have rarely been fully investigated. Here, we report a rationally designed hybrid protective layer (HPL) with each component aligning with one key attribute; i.e., cross-linked poly(dimethylsiloxane) (PDMS) enhances flexibility, polyethylene glycol (PEG) provides homogeneous ion-conducting channels, and glass fiber (GF) affords mechanical robustness. A significant improvement of the electrochemical performance of HPL-modified electrodes can be achieved in Li/HPL@Cu half cells, HPL@Li/HPL@Li symmetric cells, and HPL@Li/LiFePO 4 full cells. Even with an industrial standard LiFePO 4 cathode (96.8 wt % active material), the assembled cell still exhibits a capacity retention of 90% after 100 cycles at 1 C. More importantly, the functionality of each component has been studied comprehensively via electrochemical and physical experiments and simulations, which will provide useful guidance on how to construct efficient protective layers for next-generation energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2020

Mineral Scale Prevention on Electrically Conducting Membrane Distillation Membranes Using Induced Electrophoretic Mixing

The growth of mineral crystals on surfaces is a challenge across multiple industrial processes. Membrane-based desalination processes, in particular, are plagued by crystal growth (known as scaling), which restricts the flow of water through the membrane, can cause membrane wetting in membrane distillation, and can lead to the physical destruction of the membrane material. Scaling occurs when supersaturated conditions develop along the membrane surface due to the passage of water through the membrane, a process known as concentration polarization. To reduce scaling, concentration polarization is minimized by encouraging turbulent conditions and by reducing the amount of water recovered from the saline feed. In addition, antiscaling chemicals can be used to reduce the availability of cations. Here, we report on an energy-efficient electrophoretic mixing method capable of nearly eliminating CaSO4 and silicate scaling on electrically conducting membrane distillation (ECMD) membranes. The ECMD membrane material is composed of a percolating layer of carbon nanotubes deposited on porous polypropylene support and cross-linked by poly(vinyl alcohol). The application of low alternating potentials (2 Vpp,1Hz) had a dramatic impact on scale formation, with the impact highly dependent on the frequency of the applied signal, and in the case of silicate, on the pH of the solution.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Mixed-anion electrolytes: from bulk speciation to interfacial dynamics in divalent metal electrodeposition

Mixing anions is emerging as a promising strategy for multivalent electrolyte design, allowing for adjustment of the solvation structure of bulk cations and enhancing the efficiency of electrochemical processes (e.g. metal deposition for batteries and catalysis). Further progress in electrolyte development requires a fundamental understanding of how tailored electrolyte speciation in mixed anion systems can modify the dynamic electrochemical interface during metal cycling. In this study, we present an anode-focused mechanistic study of exemplar Mg electrolytes containing three different secondary anions, correlating electrochemical behavior with bulk speciation and operando interfacial dynamics. Electrospray Ionization-Mass Spectrometry (ESI-MS) results reveal a general trend of forming mixed anion contact ion pairs (CIPs) across various anions, with the extent of ion pairing influenced by the association strength of the secondary anion. Operando multiharmonic electrochemical quartz crystal microbalance with dissipation (EQCM-D) reveals how these bulk species influence interfacial mass uptake, viscoelasticity, and solvent-coupled hydrodynamic behavior during deposition and stripping. The results indicate that Mg-containing ion pairs and solvated complexes shape adsorption, nucleation, and deposit growth, leading to distinct anion-dependent interphases ranging from more permeable, solvent-coupled layers to relatively compact and rigid deposits. This work establishes a quantitative link between bulk speciation and interfacial dynamics in divalent metal electrodeposition and provides mechanistic guidance for electrolyte design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Strong polaronic effect in a superatomic two-dimensional semiconductor

Crystalline solids assembled from superatomic building blocks are attractive functional materials due to their hierarchical structure, multifunctionality, and tunability. An interesting example is Re 6 Se 8 Cl 2 , in which the Re 6 Se 8 building blocks are covalently linked into two-dimensional (2D) sheets that are stacked into a layered van der Waals solid. It is an indirect gap semiconductor that, when heavily doped, becomes a superconductor at low temperatures. Given the finite electronic bandwidths (300–400 meV), carrier properties in this material are expected to be strongly influenced by coupling to phonons. Here, we apply angle-resolved photoemission spectroscopy to probe the valence band edge (VBE) of Re 6 Se 8 Cl 2 . We find that dispersion of the VBE is a strong function of temperature. The bandwidth is W = 120 ± 30 meV at 70 K and decreases by one order of magnitude to W ~ 10 ± 20 meV as temperature is increased to 300 K. This observation reveals the dominant polaronic effects in Re 6 Se 8 Cl 2 , consistent with the Holstein polaron model commonly used to describe molecular solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Linking Deep and Shallow Convective Mass Fluxes via an Assumed Entrainment Distribution in CAM5‐CLUBB: Parameterization and Simulated Precipitation Variability

Abstract We modify the Zhang‐McFarlane (ZM) deep convection scheme in the Community Atmosphere Model version 5 to couple it with a unified parameterization for boundary‐layer turbulence and shallow convection, that is, Cloud Layers Unified by Binormals (CLUBB). By assuming a lognormal distribution of entrainment rate across the entire moist convective regimes, we link mass fluxes between shallow and deep convection, which are partitioned by the entrainment rate of the shallowest deep convective plume. Hence, a new deep convective closure is established which is coupled to the sub‐grid vertical motion variability in CLUBB. The convection feedback (or memory) effects are also considered to decrease the entrainment spectrum width and enhance the vertical velocity variability that further affect deep convection. Results show that the revised scheme improves the precipitation simulations in terms of the mean state and variability at various timescales, such as the alleviated double‐intertropical convergence zone and more realistic simulations of the seasonal variation of monsoon precipitation over East Asia, Madden‐Julian Oscillation, and precipitation diurnal phase propagations downstream of large terrains. The improvements are still seen in many aspects such as the mean‐state precipitation when turning off the convection feedback impacts in the revised scheme, emphasizing the benefits of using the modified mass‐flux closure. However, the convection feedbacks have considerable effects on the precipitation diurnal cycle simulations over regions with late‐afternoon precipitation peaks. Overall, the revised scheme provides a unified treatment for sub‐grid vertical motions across regimes of boundary‐layer turbulence, shallow convection, and deep convection, leading to better‐simulated precipitation at various timescales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Aerosol Vertical Turbulent Mass Flux Retrievals Through Novel Remote Sensing Algorithm

Abstract Integrated measurements of aerosol, radiation, cloud, and turbulent transport in the planetary boundary layer (PBL) are essential for understanding and modeling climate and air quality. Here, we developed a new technique for the identification of convective turbulent regions and deriving the vertical distribution of aerosol turbulent mass fluxes within PBL. The algorithm uses retrievals from coherent Doppler lidars and a high spectral resolution lidar. The technique was applied to study particle mass fluxes over 2 months (November–December 2020) during the campaign conducted at the DOE Atmospheric Radiation Measurement Southern Great Plains (SGP) site in Lamont, Oklahoma. The algorithm developed here is capable of continuously deriving vertically resolved (curtains) aerosol mass fluxes. Our data analysis shows that at the site, the 30‐min averaged fluxes at 135 m above the surface were mainly positive (upward) at ∼1 μg m −2 s −1 , suggesting that the surface is the primary source of the particle mass supplied to the boundary layer at the SGP site. Analyses of the individual case studies have revealed that not all the derived fluxes can be linked to surface emissions. Both positive and negative values in a range of ±5 μg m −2 s −1 can be caused by convective thermals interacting between the residual layer and the mixed layer and by rotation of the horizontal wind with the height. Large erroneous negative fluxes can also be caused by drizzling/precipitating clouds. We anticipate that the application of the current technique will lead to a more realistic representation of aerosol mass budgets and bidirectional mixing rates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Synthesis and Characterization of Layered Actinide (U, Np, Pu) Oxide and Hydroxide Phases

Systematic structural comparisons across the early actinides remain limited by the scarcity of well-defined transuranic layered oxide and oxyhydroxide phases. Here, we report the synthesis and single-crystal characterization of new layered actinide compounds spanning U, Np, and Pu obtained under mild hydrothermal conditions in concentrated alkali hydroxide media. These include hydrated oxides α-Cs 2 U 2 O 7 •0.5H 2 O and Rb 2 An 2 O 7 •0.5H 2 O (An = Np, Pu), oxy-hydroxides Rb 6 [(AnO 2 ) 6 O 8 (OH) 2 ]•xH 2 O x = 0, 0.5 (An = U, Np) and Rb 4 [(UO 2 ) 5 O 6 (OH) 2 ]•2H 2 O, as well as nitrate-intercalated compounds Cs 6 [(AnO 2 ) 3 O 4 (OH) 2 ](NO 3 ) 2 (An = Np, Pu). Single-crystal X-ray diffraction studies reveal extended two-dimensional architectures constructed from edge- and vertex-sharing actinyl polyhedra, with systematic evolution in equatorial coordination, hydration, and anionic sheet topology across the U–Np–Pu series. Incorporation of nitrate anions within the interlayer region of Cs 6 [(AnO 2 ) 3 O 4 (OH) 2 ](NO 3 ) 2 establishes a previously unobserved structural motif in layered transuranic oxyhydroxides, demonstrating an additional pathway for anion-mediated framework stabilization. Correlation of crystallographic metrics with single-crystal Raman spectroscopy provides new vibrational benchmarks linking differences in An═O yl bond lengths to the equatorial coordination and the interstitial cations. These findings expand the structural hierarchy of layered actinide materials and address clarifying periodic trends governing topology, bonding, and vibrational signatures in high-valent 5ƒ oxide systems.

actinides↗
DOE OSTI2022

Probing eddy size and its effective mixing length in stably stratified roughness sublayer flows

Stably stratified roughness sublayer flows are ubiquitous yet remain difficult to represent in models and to interpret using field experiments. Here, continuous high-frequency potential temperature profiles from the forest floor up to 6.5 times the canopy height observed with distributed temperature sensing (DTS) are used to link eddy topology to roughness sublayer stability correction functions and coupling between air layers within and above the canopy. The experiments are conducted at two forest stands classified as hydrodynamically sparse and dense. Near-continuous profiles of eddy sizes (length scales) and effective mixing lengths for heat are derived from the observed profiles using a novel conditional sampling approach. The approach utilizes potential temperature isoline fluctuations from a statically stable background state. The transport of potential temperature by an observed eddy is assumed to be conserved (adiabatic movement) and we assume that irreversible heat exchange between the eddy and the surrounding background occurs along the (vertical) periphery of the eddy. This assumption is analogous to Prandtl's mixing-length concept, where momentum is transported rapidly vertically and then equilibrated with the local mean velocity gradient. A distinct dependence of the derived length scales on background stratification, height above ground, and canopy characteristics emerges from the observed profiles. Implications of these findings for (1) the failure of Monin–Obukhov similarity in the roughness sublayer and (2) above-canopy flow coupling to the forest floor are examined. The findings have practical applications in terms of analysing similar DTS data sets with the proposed approach, modelling roughness sublayer flows, and interpreting nocturnal eddy covariance measurements above tall forested canopies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Methods development towards automated, physics-informed, quantitative quality control of TRISO-SiC

Tristructural-isotropic (TRISO) fuel particles have been developed as a high-performance fuel for use in high-temperature gas-cooled reactor (HTGR) systems due to their high efficiency and stability under both normal and off-normal conditions. Broader deployment of this technology in advanced nuclear applications may benefit from quantitative quality assurance and quality control (QA/QC) methods that directly link TRISO properties to downstream performance. A key TRISO property is the SiC layer microstructure, which influences fission product retention during irradiation. However, existing QA/QC for the TRISO-SiC microstructure comprises only a qualitative visual inspection; therefore, there is a clear opportunity for the development of quantitative methods for TRISO QA/QC. Here, to this end, previous work has demonstrated an image processing approach to grain boundary (GB) identification and subsequent extraction of microstructural metrics; however, extensive twinning within the SiC layer complicates such analyses because twin GBs significantly influence microstructural metrics but are not expected to contribute to fission product transport. This study presents the initial development, training, and testing of an ML-based image segmentation algorithm designed to identify and remove twin GBs from standard backscattered electron micrographs, providing an industrially applicable, quantitative, and physically meaningful QA/QC approach for the TRISO-SiC microstructure. Although pixel-wise performance metrics for the twin predictions are low, the change in grain area and the number of GB pixels after twin removal predicted by the ML workflow are within 1% of the true values calculated using crystallographic data. This suggests that the model is well capable of predicting overall twin boundary structures and grain morphology, and continued advancement of this approach could enable automated, scalable, and physics-informed QA/QC for TRISO-SiC microstructures, supporting the reliable qualification of coated particle fuels for next-generation reactor systems.

Computer vision↗
DOE OSTI2023

Crystal structure of meglumine diatrizoate, (C 7 H 18 NO 5 )(C 11 H 8 I 3 N 2 O 4 )

The crystal structure of meglumine diatrizoate has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional theory techniques. Meglumine diatrizoate crystallizes in space group P2 1 (#4) with a = 10.74697(4), b = 6.49364(2), c = 18.52774(7) Å, β = 90.2263(3), V = 1292.985(5) Å 3 , and Z = 2. Two different crystal structures, which yielded essentially identical refinement residuals and positions of the non-H atoms, were obtained. The differences were in the H atom positions and the hydrogen bonding. One structure was 123.0 kJ/mol/cell lower in energy than the other and was adopted for the final description. The crystal structure consists of alternating double layers of cations and anions along the c-axis. The hydrogen bonds link the cations and anions into a three-dimensional framework. Each of the hydrogen atoms on the ammonium nitrogen of the cation acts as a donor in a strong N–H∙∙∙O hydrogen bond. One of these is to a hydroxyl group of another cation, and the other is to the carboxylate group of the anion. Each of the amide nitrogen atoms of the anion forms a strong N–H∙∙∙O intermolecular hydrogen bond, one to a carbonyl and the other to a carboxylate group. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Continuous polymer films deposited on top of porous substrates using plasma-enhanced atomic layer deposition and molecular layer deposition

Molecular layer deposition (MLD) is able to produce ultrathin polymer films with control over thickness, cross-linking, and chemical composition. With these capabilities, MLD should be useful in the fabrication of novel polymer membranes on porous supports. However, confining a continuous MLD film to the surface of porous substrates is difficult because of MLD film growth in the pores. The deposition in the pores lowers the conductance of the porous support. This paper presents a method to deposit continuous polymer films on top of porous substrates. In this method, Al2O3 plasma-enhanced atomic layer deposition (PE-ALD) using trimethylaluminum and oxygen plasma as the reactants was first used to cap the pores of the substrate. Subsequently, a polyamide MLD film was deposited on the Al2O3 PE-ALD capping layer using m-phenylenediamine and trimesoyl chloride as the reactants. The Al2O3 pore caps were then removed from the porous substrate by etching from the backside using a timed exposure to a dilute sodium hydroxide solution. This method was demonstrated using anodic aluminum oxide (AAO) and polyethersulfone (PES) porous substrates. Al2O3 PE-ALD film growth was limited to the top of the porous substrate, resulting in rapid surface recombination or high sticking coefficients for the reactive plasma species within the pores. Gas permeance measurements confirmed the pore capping of the AAO substrates. The reopening of the pores by dissolving the Al2O3 pore caps with a sodium hydroxide solution was monitored using gas permeance versus etch time. The removal of the Al2O3 pore caps from the PES substrates could also dissolve the Al2O3 layer underneath the MLD film. The loss of this Al2O3 layer led to the detachment of the MLD film from the PES substrate. However, the MLD film could be anchored to the PES support at fractures located in the Al2O3 film prior to the MLD. The Al2O3 film fracture allowed the MLD film to anchor firmly to the PES substrate by MLD in the pores of the PES porous substrate. The distance between the anchor points was a function of fracture density. This distance could be controlled by applying a tensile stress to the Al2O3 PE-ALD film to fracture the film through sample bending. This method produced firmly anchored polymer MLD films on top of the PES porous substrates.

Welch, Brian C. (ORCID:000000029747045X)↗
DOE OSTI2022

Root and xylem anatomy varies with root length, root order, soil depth and environment in intermediate wheatgrass (Kernza®) and alfalfa

Abstract Background and Aims Deep roots (i.e. >1 m depth) are important for crops to access water when the topsoil is dry. Root anatomy and hydraulic conductance play important roles in the uptake of soil water, particularly water located deep in the soil. We investigated whether root and xylem anatomy vary as a function of root type, order and length, or with soil depth in roots of two deep-rooted perennial crops: intermediate wheatgrass [Thinopyrum intermedium (Kernza®)] and alfalfa (Medicago sativa). We linked the expression of these anatomical traits to the plants’ capacity to take up water from deep soil layers. Methods Using laser ablation tomography, we compared the roots of the two crops for cortical area, number and size of metaxylem vessels, and their estimated root axial hydraulic conductance (ERAHCe). The deepest roots investigated were located at soil depths of 2.25 and at 3.5 m in the field and in rhizoboxes, respectively. Anatomical differences were characterized along 1-m-long individual roots, among root types and orders, as well as between environmental conditions. Key Results For both crops, a decrease in the number and diameter, or both, of metaxylem vessels along individual root segments and with soil depth in the field resulted in a decrease in ERAHCe. Alfalfa, with a greater number of metaxylem vessels per root throughout the soil profile and, on average, a 4-fold greater ERAHCe, took up more water from the deep soil layers than intermediate wheatgrass. Root anatomical traits were significantly different across root types, classes and growth conditions. Conclusions Root anatomical traits are important tools for the selection of crops with enhanced exploitation of deep soil water. The development and breeding of perennial crops for improved subsoil exploitation will be aided by greater understanding of root phenotypes linked to deep root growth and activity.

Plant Sciences↗
DOE OSTI2021

Surface Salinity Under Transitioning Ice Cover in the Canada Basin: Climate Model Biases Linked to Vertical Distribution of Fresh Water

Abstract The Canada Basin has exhibited a significant trend toward a fresher surface layer and thus a more stratified upper‐ocean over the past three decades. State‐of‐the‐art ice‐ocean models, by contrast, tend to simulate a surface layer that is saltier and less stratified than observed. Here, we examine decadal changes to seasonal processes that may contribute to this wide‐reaching model bias using climate model simulations from the Community Earth System Model and below‐ice observations from the Arctic Ice Dynamics Joint Experiment in 1975 and Ice Tethered Profilers in 2006–2012. In contrast to the observations, the models simulate salinity profiles that show relatively little variation between 1975 and 2012. We demonstrate that this bias can be mainly attributed to unrealistically deep vertical mixing in the model, creating a surface layer that is saltier than observed. The results provide insight for climate model improvement with broad implications for Arctic sea ice and ecosystem dynamics.

58 GEOSCIENCES↗