Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “light hydrocarbons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Simulation and Optimization of Volatile Fatty Acid Upgrading Strategies for Sustainable Transportation Fuel Production

Underutilized wet waste is a promising feedstock for production of carbon-neutral or carbon-negative liquid transportation fuels. Arrested methanogenesis of wet wastes by microbes, which produces mixtures of C2-C8 carboxylic acids (volatile fatty acids, VFAs), is practiced industrially at a pilot scale and the VFA products can be catalytically upgraded to molecules suitable for use as transportation fuels (alcohols and alkanes) via sequential ketonization and hydrogenation, both steps of which have been demonstrated with high (>90%) yield at the lab scale. We present in this work a simulation-based decision-making framework which evaluates upgrading strategies of VFAs to alcohol- and hydrocarbon-based neat and blended diesel, jet, and gasoline fuels. The processes utilize sequential upgrading steps (ketonization and hydrogenation) accompanied by one distillation step (either separating VFAs before ketonization or alcohols after ketone hydrogenation) to form two liquid streams: a light alcohol stream best suited as a light-duty fuel and a heavy alcohol or hydrocarbon stream best suited as a diesel or jet fuel. Suitability of the liquid products as transportation fuels and maximum blending levels with petrofuels comes from simulation of critical fuel properties (boiling point, flash point, lower heating value, viscosity, melting point, water solubility, and cetane/octane number). Catalytic upgrading steps and fuel property mixing models used by the simulation are experimentally validated. We demonstrate the flexibility of the decision-making algorithm by evaluating processing scenarios for experimentally-observed VFA profiles with varied carbon chain length distributions. Processing scenarios are optimized for either maximum total renewable carbon utilization or production of heavy-duty (jet or diesel) fuels. We evaluate the economic viability and CO2 emissions of each proposed upgrading scenario using techno-economic and life cycle analyses. The decision-making framework developed in this work can also be used to down-select promising strategies for upgrading of other bio-based feedstocks to sustainable fuels and chemicals.

aviation fuel↗
NASA NTRS1976

Development of EPA aircraft piston engine emission standards

Piston engine light aircraft are significant sources of carbon monoxide in the vicinity of high activity general aviation airports. Substantial reductions in carbon monoxide were achieved by fuel mixture leaning using improved fuel management systems. The air quality impact of the hydrocarbon and oxides of nitrogen emissions from piston engine light aircraft were insufficient to justify the design constraints being confronted in present control system developments.

Houtman, W.↗
DOE OSTI2021

A Full Spectrum of Characterization for Insight into Carbon Speciation and Removal on a Cu/BEA Catalyst During Renewable High-Octane Hydrocarbon Synthesis

Conversion of methanol and dimethyl ether to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Spectroscopic insight into carbon speciation and removal on a Cu/BEA catalyst during renewable high-octane hydrocarbon synthesis

Conversion of methanol and dimethyl ether (DME) to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu oxide during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Pairing Ga/Al-Zeolites with tailored acidity as tandem catalysts for the conversion of alcohols to olefins

Zeolites are versatile catalysts owing to their tunable acidity where the active site(s) can be placed within the crystal framework or as extra-framework species in confined pores. A common approach to tailor Brønsted acidity is heteroatom exchange involving the replacement of framework aluminum with alternative elements. Introduction of heteroatoms often results in less acidic catalysts that can be used in tandem reactions for targeted reactive intermediates. Here, in this study, we prepare a series of three different zeolites with MWW, CHA, and MFI frameworks as aluminosilicates and gallosilicates to demonstrate their performance in alcohol dehydration reactions. The two reactions examined in this study are methanol conversion to dimethyl ether and ethanol conversion to ethylene. Our findings reveal that Ga-zeolites exhibit superior performance with Ga-MCM-22 (MWW) achieving nearly 100% alcohol conversion and selectivity to desired products at contact times that are significantly less than most dehydration catalysts reported in literature. The unique properties of Ga-zeolites are attributed to their reduced acid site strength via a direct (one-pot) synthesis that avoids conventional time-intensive, multi-step post-synthesis modifications of Al-zeolites. Here we demonstrate the use of Ga-zeolites as tandem catalysts when paired with a downstream Al-zeolite in a dual-bed reactor configuration to convert cheaper reagents (alcohols) upstream to more desired intermediates as feeds for downstream catalysts to produce light olefins. We demonstrate that dual beds using Ga-zeolite – Al-ZSM-5 (upstream–downstream) pairings outperform single bed configurations with Al-ZSM-5 or a physical mixture (Ga-/Al-zeolite) for methanol to hydrocarbons reactions, with notable improvements in catalyst lifetime and increased light olefins selectivity. Similarly, dual beds using Ga-zeolite – Al-SSZ-13 (upstream–downstream) pairings result in improved performance for ethanol to propylene reactions with significant increases in propylene selectivity (>20 %) compared to a conventional single bed configuration of Al-SSZ-13. Overall, this study offers a new perspective on the use of heteroatom-exchanged zeolite catalysts in tandem reactions as a means of capitalizing on their reduced acid site strength and suggests differences in the intrinsic acidity of zeolite crystal structures.

42 ENGINEERING↗
NASA NTRS2001

The Production of Complex Organics from Interstellar Ices

Infrared spectroscopy of ices in interstellar dense molecular clouds has shown that they contain a variety of simple molecules, as well as aromatic hydrocarbons. While in these clouds, these ices are processed by ultraviolet light and cosmic rays. High vacuum, UV irradiation laboratory simulations conducted using various realistic approx. 10 K interstellar mixed-molecular ice analogs, both with and without polycyclic aromatic hydrocarbons (PAHs), have been carried out in NASA-Ames' Astrochemistry Laboratory. Upon warming, these irradiated ices are found to produce refractory organic residues. These residues have been analyzed using a variety of techniques, including HPLC and laser desorption mass spectrometry, and they have been shown to contain a variety of complex organic compounds. Several of these compounds may be of prebiotic significance. In particular, we will discuss the detection of quinones (substituted PAHs that are used by living systems for electron transport) and amphiphiles (molecules that self-assemble to form membranes). Laboratory simulations have also demonstrated that the organic products can show isotopic enrichments in D that provide clues for the mechanisms of their formation. Similar compounds and D enrichments are seen in the organics found in primitive meteorites, suggesting a direct link between interstellar chemistry and the delivery of organics to newly formed planets.

Sandford, Scott A.↗
DOE OSTI2025

Low temperature polyolefin deconstruction via tandem cracking-hydrogenation

The use of aluminum chloride in dichloromethane to crack polyolefin chains in tandem with alkylation of the resulting products has been previously reported as an efficient polyolefin recycling route. Building off this work, we report that a tandem cracking-hydrogenation system also efficiently converts polyolefins into gasoline-range light alkanes at mild temperatures without needing a hydrocarbon co-reactant. This Lewis acid and hydrogenation bifunctional system uses anhydrous aluminum chloride as the acid catalyst and Pd/C as a hydrogenation catalyst to achieve nearly 80 % conversion of low-density polyethylene (LDPE) at 70 °C in three hours, with 90+% selectivity towards gasoline-range (C 4 -C 12 ) branched alkanes. By combining the endothermic cracking reaction with the exothermic hydrogenation reaction, the thermodynamic limitations to low-temperature polyolefin deconstruction can be overcome. In using hydrogenation instead of alkylation, the system’s carbon efficiency is greatly improved, the cost of the reactants is reduced and the overall mass of both reactants and products reduced as well.

Alkylation↗
DOE OSTI2021

Effects of CO and H2O Co-Feed on the Adsorption and Oxidation Properties of a Pd/BEA Hydrocarbon Trap

Hydrocarbon traps for exhaust emissions control adsorb hydrocarbons in low temperature exhaust and release them as the exhaust warms up. In this work, a Pd/BEA hydrocarbon trap was tested under lean exhaust conditions using ethylene and dodecane as model hydrocarbons. Ethylene uptake was partially inhibited by CO and H2O when fed separately. When both were added, the loss in ethylene uptake was 90% relative to the condition with no H2O or CO. Dodecane uptake was unchanged under all conditions tested. During a temperature ramp, ethylene desorbed and was combusted to CO2 and H2O over active Pd centers. Further, oxidation light-off of dodecane generated an exotherm which caused rapid desorption of the remaining hydrocarbon species from the zeolite. For both hydrocarbons, CO co-feed led to a decreased oxidation light-off temperature, and therefore lower desorption temperature. By pretreating the catalyst in CO and H2O at 80 °C, and even after removing CO from the feed, the enhanced oxidation light-off behavior was observed. DRIFTS characterization shows that some form of oxidized Pd was reducible to Pd0 by CO at 80 °C only in the presence of H2O. Further, this reduction appears reversible by high temperature oxygen treatment. We speculate that this reduced Pd phase serves as the active site for low temperature hydrocarbon oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2008

NASA Tech Briefs, September 2008

Topics covered include: Nanotip Carpets as Antireflection Surfaces; Nano-Engineered Catalysts for Direct Methanol Fuel Cells; Capillography of Mats of Nanofibers; Directed Growth of Carbon Nanotubes Across Gaps; High-Voltage, Asymmetric-Waveform Generator; Magic-T Junction Using Microstrip/Slotline Transitions; On-Wafer Measurement of a Silicon-Based CMOS VCO at 324 GHz; Group-III Nitride Field Emitters; HEMT Amplifiers and Equipment for their On-Wafer Testing; Thermal Spray Formation of Polymer Coatings; Improved Gas Filling and Sealing of an HC-PCF; Making More-Complex Molecules Using Superthermal Atom/Molecule Collisions; Nematic Cells for Digital Light Deflection; Improved Silica Aerogel Composite Materials; Microgravity, Mesh-Crawling Legged Robots; Advanced Active-Magnetic-Bearing Thrust- Measurement System; Thermally Actuated Hydraulic Pumps; A New, Highly Improved Two-Cycle Engine; Flexible Structural-Health-Monitoring Sheets; Alignment Pins for Assembling and Disassembling Structures; Purifying Nucleic Acids from Samples of Extremely Low Biomass; Adjustable-Viewing-Angle Endoscopic Tool for Skull Base and Brain Surgery; UV-Resistant Non-Spore-Forming Bacteria From Spacecraft-Assembly Facilities; Hard-X-Ray/Soft-Gamma-Ray Imaging Sensor Assembly for Astronomy; Simplified Modeling of Oxidation of Hydrocarbons; Near-Field Spectroscopy with Nanoparticles Deposited by AFM; Light Collimator and Monitor for a Spectroradiometer; Hyperspectral Fluorescence and Reflectance Imaging Instrument; Improving the Optical Quality Factor of the WGM Resonator; Ultra-Stable Beacon Source for Laboratory Testing of Optical Tracking; Transmissive Diffractive Optical Element Solar Concentrators; Delaying Trains of Short Light Pulses in WGM Resonators; Toward Better Modeling of Supercritical Turbulent Mixing; JPEG 2000 Encoding with Perceptual Distortion Control; Intelligent Integrated Health Management for a System of Systems; Delay Banking for Managing Air Traffic; and Spline-Based Smoothing of Airfoil Curvatures.

Source record↗
DOE OSTI2020

Production and Fuel properties of Iso-Olefins with Controlled Molecular Structure and Obtained from Butene Oligomerization

The ability to control the molecular structure (e.g., degree of branching) of iso-olefins produced from oligomerizing light olefins is a valuable tool for tuning the final compositions of hydrocarbon fuels and targeting specific fuel properties. In this study, we demonstrated that the degree of branching of iso-olefins obtained from butene(s) oligomerization can be controlled by tuning process conditions (i.e., temperature, weight hourly space velocity [WHSV], and nature of butene feedstock) and by choosing the proper catalyst (i.e., Amberlyst-36 vs. Y/ZSM-22). In this study, we produced three types of iso-olefin mixtures: 1) a methyl-heptenes rich (74 wt.%) mixture, 2) dimethyl-hexenes rich (80–96 wt.%) mixtures, and 3) highly branched (i.e., more than three methyl substitutions) iso-olefins rich (>50 wt.%) mixtures. While dimethyl-hexenes are preferentially formed at lower temperatures (60–100°C) and WHSV (i.e., 2 hr-1), methyl-heptenes are favorably produced at higher temperatures (>100°C) and WHSVs (i.e., 7 hr-1) over Amberlyst-36. The use of either 1-butene or 2-butene as feedstock resulted in liquid products with similar branching because facile intramolecular isomerization occurs prior to oligomerization. However, the use of isobutylene feedstock forms a significantly more branched olefin product. The formation of highly branched iso-olefins also is favored at higher temperature (140°C) over Amberlyst-36. Using Y/ZSM-22 instead of Amberlyst-36 allowed preferential formation of less-branched methyl-heptenes. For each type of iso-olefins mixture, we determined fuel properties including research octane number (RON), motor octane number (MON), and octane sensitivity (S), which is the difference between RON and MON. We found that not only RON and MON but also S values increased with the degree of branching of these complex mixtures of iso-olefins. The highest RON of 99.7 and S value of 9.3 were obtained for a mixture of highly branched iso-olefins.

Dagle, Vanessa↗
NASA NTRS2000

Photochemistry of Methane in Model Atmospheres of Jupiter and Titan

The two central findings were 1) hydrogen atoms and hydrogen molecules photodissociated from methane are relatively richer in H than in D in other words deuterium atoms have a greater probability of remaining attached to the carbon atom. Titan, a moon of Saturn has an atmosphere which is largely nitrogen but also contains about 3% methane as well as smaller amounts of C2 and C3 hydrocarbons. If all these hydrocarbons are of biological origin, the isotopic scrambling occurring in living organisms would result in equal D atom abundances. On the other hand, if the higher hydrocarbons are derived from methane by photodissociation of methane, they should be richer in D than methane. Precise values for the enrichment were derived from our photochemical data. 2) When methane is dissociated by vuv light, methylene is produced in a singlet state. This explains why the higher hydrocarbons are sparse on Jupiter but relatively rich on Titan.

Bersohn, Richard↗
NASA NTRS2001

Organic Synthesis in Simulated Interstellar Ice Analogs

Comets and carbonaceous micrometeorites may have been significant sources of organic compounds on the early Earth. Ices on grains in interstellar dense molecular clouds contain a variety of simple molecules as well as aromatic molecules of various sizes. While in these clouds the icy grains are processed by ultraviolet light and cosmic radiation which produces more complex organic molecules. We have run laboratory simulations to identify the types of molecules which could have been generated photolytically in pre-cometary ices. Experiments were conducted by forming various realistic interstellar mixed-molecular ices with and without polycyclic aromatic hydrocarbons (PAHs) at approx. 10 K under high vacuum irradiated with UV light from a hydrogen plasma lamp. The residue that remained after warming to room temperature was analyzed by HPLC, and by laser desorption mass spectrometry. The residue contains several classes of compounds which may be of prebiotic significance.

Dworkin, Jason P.↗
NASA NTRS2001

Organic Synthesis in Simulated Interstellar Ice Analogs

Comets and carbonaceous micrometeorites may have been significant sources of organic compounds on the early Earth. Ices on grains in interstellar dense molecular clouds contain a variety of simple molecules as well as aromatic molecules of various sizes. While in these clouds the icy grains are processed by ultraviolet light and cosmic radiation which produces more complex organic molecules. ID We have run laboratory simulations to identify the types of molecules which could have been generated photolytically in pre-cometary ices. Experiments were conducted by forming various realistic interstellar mixed-molecular ices with and without polycyclic aromatic hydrocarbons (PAHs) at approx. 10 K under high vacuum irradiated with LTV light from a hydrogen plasma lamp: The residue that remained after warming to room temperature was analyzed by HPLC, and by laser desorption mass spectrometry. The residue contains several classes of compounds which may be of prebiotic significance.

Dworkin, Jason P.↗
DOE OSTI2025

The composition of gases from a diffusion flame above longleaf pine needle fuel beds

The gas and tar composition of a diffusion flame from longleaf pine needles is currently poorly understood and more data are needed to fill in the gap between pyrolysis data and smoke plume data, thus improving physical and chemical modeling of wildland smoke formation. A pilot experiment to measure light gas and tar composition of such a flame is described for three flame regions: persistent flame (flame base), intermittent flame, and smoke plume. Flame gases from 24 experimental fires were collected in canisters and analyzed using EPA method TO-14A for CO 2 , CO, H 2 , CH 4 , and C 2 to C 7 hydrocarbon gases. Condensed gas (tar) samples were collected and analyzed using GC/MS. Other light gases were measured using FTIR spectroscopy. Results from compositional data analysis suggest significant differences in (relative) concentration of compounds detected in the three regions of the flame. Statistical tests for differences in flame zones were performed using the canister data: Concentration of hydrocarbons relative to CO and CO 2 decreased from the persistent flame zone above the pyrolyzing needles through the intermittent flame region into the flame-free plume. This was likely due to both chemical reactions (oxidation) occurring in the flame as well as the introduction of air into the flame/plume by entrainment.

Biomass↗
DOE OSTI2026

Reacting CO 2 with Light Alkanes to Value-Added Products

Catalytic conversion of anthropogenic carbon dioxide (CO 2 ) into value-added products is a promising strategy to mitigate global carbon emissions. Concurrently, the shale gas revolution has provided an abundant supply of light alkanes (methane, ethane, propane, and butane), presenting a unique opportunity to employ these underutilized hydrocarbons as an effective, low-cost hydrogen source for CO 2 reduction. In this Perspective, we summarize past efforts, current state, and future opportunities for reacting CO 2 with light alkanes to generate a diverse range of value-added products. Compared with direct alkane conversion, the introduction of CO 2 fundamentally alters reaction thermodynamics and kinetics, enabling selective C–H and C–C bond activation while suppressing catalyst deactivation from coke formation. Building on decades of research in dry reforming and CO 2 -assisted dehydrogenation, recent advances in catalyst design have enabled CO 2 -assisted dehydrogenation processes that approach chemical equilibrium for the selective production of olefins and syngas. Importantly, advances in catalyst design and reactor engineering have further expanded the product scope beyond gas-phase (syngas and olefins) to include liquid-phase (oxygenates and aromatics), and solid-phase products (carbon nanomaterials). We highlight key catalyst design principles for controlling reaction pathways and discuss major challenges and opportunities in developing selective and versatile platforms for the simultaneous upgrading of CO 2 and light alkanes.

CO2↗
NASA NTRS1978

A new channel for the formation of hydrogen cyanide in CH2-N2 systems

The reaction between N2 and either the singlet or the triplet electronic state of CH2 is investigated in order to shed light on the formation of NO in fuel-rich hydrocarbon flames. For the reaction of N2 and the triplet CH2, a rate constant less than or equal to 10 to the minus 16th power cu cm/molecule-sec is obtained. The time history of hydrogen cyanide production from the CH2-N2 systems is discussed as a basis for understanding the possible reaction routes from HCN to NO.

Laufer, A. H.↗
DOE OSTI2022

Can CO 2 -assisted alkane dehydrogenation lead to negative CO 2 emissions?

The utilization of light alkanes to generate value-added chemicals has gained significant attention due to the U.S. shale gas boom in recent decades. For example, after methane, ethane (3-16 vol.%) and propane (up to 5 vol.%) are the most abundant hydrocarbon species in shale gas deposits. Further, these inexpensive, widely available, but often underutilized, light alkanes can be used as a feedstock to produce olefins, which are among the most important petrochemical building blocks in chemical industry. Ethylene and propylene are used in the production of polymers (e.g., polyethylene, polypropylene) and epoxides (e.g., ethylene oxide, propylene oxide), as well as intermediates in the manufacture of numerous other chemicals (e.g., ethylene glycol, ethylbenzene, acetone, isopropanol, acrylonitrile).

03 NATURAL GAS↗