Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lattice structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Computerized symbolic manipulation in structural mechanics Progress and potential

Status and recent applications of computerized symbolic manipulation to structural mechanics problems are summarized. The applications discussed include; (1) generation of characteristic arrays of finite elements; (2) evaluation of effective stiffness and mass coefficients of continuum models for repetitive lattice structures; and (3) application of Rayleigh-Ritz technique to free vibration analysis of laminated composite elliptic plates. The major advantages of using computerized symbolic manipulation in each of these applications are outlined. A number of problem areas which limit the realization of the full potential of computerized symbolic manipulation in structural mechanics are examined and some of the means of alleviating them are discussed.

Noor, A. K.↗
NASA NTRS1992

Capacity loss on storage and possible capacity recovery for HST nickel-hydrogen cells

Negatively precharged nickel hydrogen cells will experience a useable capacity loss during extended open circuit storage periods. Some of the lost capacity can be recovered through cycling. Capacity recovery through cycling can be enhanced by cycling at high depths of discharge (DOD). The most timely procedure for recovering the faded capacity is to charge the cell fully and allow the cell to sit open-circuit at room temperature. This procedure seems to be effective in part because of the enlarged structure of the active materials. The compounds that formed during storage at the low electrode potentials can more easily dissolve and redistribute. All of the original capacity cannot be recovered because the lattice structure of the active material is irreversibly altered during storage. The recommendation is to use positively precharged cells activated with 26 percent KOH if possible. In aerospace applications, the benefits of negative precharge are offset by the possibility of delays and storage periods.

Lowery, John E.↗
NASA NTRS1985

Adaptive control of large space structures using recursive lattice filters

The use of recursive lattice filters for identification and adaptive control of large space structures was studied. Lattice filters are used widely in the areas of speech and signal processing. Herein, they are used to identify the structural dynamics model of the flexible structures. This identified model is then used for adaptive control. Before the identified model and control laws are integrated, the identified model is passed through a series of validation procedures and only when the model passes these validation procedures control is engaged. This type of validation scheme prevents instability when the overall loop is closed. The results obtained from simulation were compared to those obtained from experiments. In this regard, the flexible beam and grid apparatus at the Aerospace Control Research Lab (ACRL) of NASA Langley Research Center were used as the principal candidates for carrying out the above tasks. Another important area of research, namely that of robust controller synthesis, was investigated using frequency domain multivariable controller synthesis methods.

Goglia, G. L.↗
NASA NTRSDate not supplied

NASA/ONERA Collaboration on Small Hovering Rotor Broadband Noise Prediction using Lattice-Boltzmann and Structured Navier-Stokes Solvers

This work compares two lattice-Boltzmann method solvers, PowerFLOW and ProLB, and two structured Navier-Stokes solvers, OVERFLOW2 and FAST, used by NASA and ONERA, respectively, for the broadband noise prediction of an ideally twisted rotor as part of Implementing Arrangement number FR-0685-0, ‘Comparing Computational Fluid Dynamics Solvers for Broadband Noise Prediction.’ Predicted results are evaluated against measured data from both smooth and rough blade sets acquired in the Small Hover Anechoic Chamber at the NASA Langley Research Center. Aerodynamic thrust predictions are seen to agree more favorably with the rough-blade measurements, whereas torque predictions agree better with the smooth-blade measurements. A tonal noise comparison shows better agreement to the measured data with the two structured Navier-Stokes solvers than with the two lattice-Boltzmann solvers, which is thought to be caused by the different geometric discretization associated with each solver paradigm. Broadband noise comparisons show that both lattice-Boltzmann method solvers trend well with the smooth-blade measurements, with the exception of an overprediction by ProLB between 4 kHz and 15 kHz. OVERFLOW2 is seen to capture the measured nondeterministic tonal content between 3 kHz and 8 kHz on a narrowband spectral basis and FAST agrees well with the rough blades on a one-third octave band basis.

Christopher S. Thurman↗
NASA NTRS2003

Questions Revisited: A Close Examination of Calculus of Inference and Inquiry

In this paper I examine more closely the way in which probability theory, the calculus of inference, is derived from the Boolean lattice structure of logical assertions ordered by implication. I demonstrate how the duality between the logical conjunction and disjunction in Boolean algebra is lost when deriving the probability calculus. In addition, I look more closely at the other lattice identities to verify that they are satisfied by the probability calculus. Last, I look towards developing the calculus of inquiry demonstrating that there is a sum and product rule for the relevance measure as well as a Bayes theorem. Current difficulties in deriving the complete inquiry calculus will also be discussed.

Knuth, Kevin H.↗
NASA NTRS1994

Plasma dust crystallization

In a ground-based definition study, a concept for a new type of microgravity experiment is developed. We formed a new state of matter: a crystalline lattice structure of charged micron-size spheres, suspended in a charge-neutral plasma. The plasma is formed by a low-pressure radio-frequency argon discharge. Solid microspheres are introduced, and they gain a negative electric charge. They are cooled by molecular drag on the ambient neutral gas. They are detected by laser light scattering and video photography. Laboratory experiments have demonstrated that a two-dimensional nonquantum lattice forms through the Coulomb interaction of these spheres. Microgravity is thought to be required to observe a three-dimensional structure.

Goree, John↗
NASA NTRS1998

Applications of Artificial Neural Networks in Structural Engineering with Emphasis on Continuum Models

The use of continuum models for the analysis of discrete built-up complex aerospace structures is an attractive idea especially at the conceptual and preliminary design stages. But the diversity of available continuum models and hard-to-use qualities of these models have prevented them from finding wide applications. In this regard, Artificial Neural Networks (ANN or NN) may have a great potential as these networks are universal approximators that can realize any continuous mapping, and can provide general mechanisms for building models from data whose input-output relationship can be highly nonlinear. The ultimate aim of the present work is to be able to build high fidelity continuum models for complex aerospace structures using the ANN. As a first step, the concepts and features of ANN are familiarized through the MATLAB NN Toolbox by simulating some representative mapping examples, including some problems in structural engineering. Then some further aspects and lessons learned about the NN training are discussed, including the performances of Feed-Forward and Radial Basis Function NN when dealing with noise-polluted data and the technique of cross-validation. Finally, as an example of using NN in continuum models, a lattice structure with repeating cells is represented by a continuum beam whose properties are provided by neural networks.

Kapania, Rakesh K.↗
NASA NTRS2010

Formula for the Removal and Remediation of Polychlorinated Biphenyls in Painted Structures

An activated metal treatment system (AMTS) removes and destroys polychlorinated biphenyls (PCBs) found in painted structures or within the binding or caulking material on structures. It may be applied using a "paint-on and wipe-off" process that leaves the structure PCB-free and virtually unaltered in physical form. AMTS is used in conjunction with a solvent solution capable of donating hydrogen atoms. AMTS as a treatment technology has two functions: first, to extract PCBs from the material, and second, to degrade the extracted PCBs. The process for removing PCBs from structures is accomplished as an independent step to the degradation process. The goal is to extract the PCBs out of the paint, without destroying the paint, and to partition the PCBs into an environmentally friendly solvent. The research to date indicates this can be accomplished within the first 24 hours of AMTS contact with the paint. PCBs are extremely hydrophobic and prefer to be in the AMTS over the hardened paint or binder material. The solvent selected must be used to open, but not to destroy, the paint s polymeric lattice structure, allowing pathways for PCB movement out of the paint and into the solvent. A number of solvent systems were tested and are available for use within the AMTS. The second process of the AMTS is the degradation or dehalogenation of the PCBs. The solvent selection for this process is limited to solvents that are capable of donating a hydrogen atom to the PCB structure. Additional AMTS formulation properties that must be addressed for each site-specific application include viscosity and stability. The AMTS must be thick enough to remain where it is applied. Several thickening agents have been tested. Adding a stabilizing agent ensures that the AMTS will not evaporate and leave unprotected, activated metal exposed. During AMTS formulation testing, a number of reagents were evaluated to ensure the rate of dehalogenation was not inhibited by its addition to the system.

Quinn, Jacqueline↗
NASA NTRS2009

Methods Reduce Cost, Enhance Quality of Nanotubes

For all the challenges posed by the microgravity conditions of space, weight is actually one of the more significant problems NASA faces in the development of the next generation of U.S. space vehicles. For the Agency s Constellation Program, engineers at NASA centers are designing and testing new vessels as safe, practical, and cost-effective means of space travel following the eventual retirement of the space shuttle. Program components like the Orion Crew Exploration Vehicle, intended to carry astronauts to the International Space Station and the Moon, must be designed to specific weight requirements to manage fuel consumption and match launch rocket capabilities; Orion s gross liftoff weight target is about 63,789 pounds. Future space vehicles will require even greater attention to lightweight construction to help conserve fuel for long-range missions to Mars and beyond. In order to reduce spacecraft weight without sacrificing structural integrity, NASA is pursuing the development of materials that promise to revolutionize not only spacecraft construction, but also a host of potential applications on Earth. Single-walled carbon nanotubes are one material of particular interest. These tubular, single-layer carbon molecules - 100,000 of them braided together would be no thicker than a human hair - display a range of remarkable characteristics. Possessing greater tensile strength than steel at a fraction of the weight, the nanotubes are efficient heat conductors with metallic or semiconductor electrical properties depending on their diameter and chirality (the pattern of each nanotube s hexagonal lattice structure). All of these properties make the nanotubes an appealing material for spacecraft construction, with the potential for nanotube composites to reduce spacecraft weight by 50 percent or more. The nanotubes may also feature in a number of other space exploration applications, including life support, energy storage, and sensor technologies. NASA s various efforts with carbon nanotubes have made it a global leader in this field. Among the many examples are Johnson Space Center s Carbon Nanotube Project, which focuses on bulk nanotube production, purification, and application, and Goddard Space Flight Center s improved arc discharge method of nanotube production, developed under the direction of Jeannette Benavides (featured in Spinoff 2007 and 2008). While the Agency continues its own research, it partners with private companies to advance this unique technology for use on Earth as well as among the stars.

Source record↗
NASA NTRS1973

Solid core in neutron stars.

Consideration of the question of the solidification of neutron matter under a sufficiently high pressure. Calculations are presented which show that under conditions of pressure and density that typically prevail in the interior of a neutron star a system of strongly interacting baryons minimizes the energy by arranging the constituents in a lattice structure. In addition, observational evidence (regarding pulsar spinups or glitches) is cited which supports the idea of a solid neutron core for heavy neutron stars.

Canuto, V.↗
NASA NTRS1973

Solidification in neutron star cores

A mathematical computation based on the t-matrix approach shows that a system of strongly interacting baryons under sufficiently high pressure (approximately 10 to the 30th power atm) and densities greater than 10 to the 15th power g/cu cm minimizes the energy by arranging the constituents in a lattice structure rather than in a fluid phase. The solution is given assuming an optimum spin arrangement, although all other possible arrangements would also satisfy the conditions for crystallization to occur.

Canuto, V.↗
NASA NTRS1975

Wear and interfacial transport of material

Bonding across the interface for two solids in contact and the subsequent transfer of material from one surface to another is a direct result of the interfacial bonds being stronger than the cohesive bonds in either of the two solids. Surface tools such as LEED, Auger emission spectroscopy, field ion microscopy, and the atom probe are used to examine adhesive contacts and to determine the direction, nature, quantity of material transfer and properties of the solids which effect transfer and wear. The electronic nature, cohesive binding energies, surface structure, lattice disregistry and distribution of species in surface layers are all found to effect adhesion and transfer or transport for clean surfaces in solid state contact. The influence of adsorbed and reacted surface films from fractions of a monolayer to multilayer reactive films are considered. It is shown that even fractions of a monolayer of surface active species such as oxygen and sulfur can markedly inhibit adhesion and transport.

Buckley, D. H.↗
NASA NTRS1976

The metal to metal interface and its effect on adhesion and friction

The paper considers the interface between two bulk metals and the effect of this interface on adhesive bonding, resistance to tangential displacements, friction and the interfacial transport from one surface to another. Using Auger emission spectroscopy, field ion microscopy, and low energy electron diffraction techniques, the influence of surface orientation, lattice registry, crystal lattice structure and defects, metal surface chemistry and alloying on the characteristics of the interface was studied for noble, platinum, transition, and Group 4B metals. With dissimilar metals in contact, epitaxial transfer of the cohesively weaker to the cohesively stronger metal has been observed. Surface chemical activity of the noble and platinum metals is shown to affect interfacial behavior as does a valence bonding in the transition metals, and the degree of metallic nature in the Group 4B elements. Alloying elements, e.g., Si and Fe, can alter interfacial behavior by segregation to the surface of metals or by altering bulk properties such as crystal transformation kinetics.

Buckley, D. H.↗
NASA NTRS1977

Interaction of the surfaces of the moon and Mercury with their exospheric atmospheres

A model of atmosphere-surface interactions on the moon and on Mercury is presented. This model rejects the traditional assumption that the atmospheric particle source is a 'saturated' absorbed surface layer of gas and instead assumes that interaction is with solid atoms bound in a lattice structure so that most collisions with the light atmospheric particles are free-free rather than free-bound. The energy accommodation per collision for He and H is dominated by first-order interaction terms and is generally less than 0.1 per collision. It follows that estimated thermal escape is drastically reduced for the light atoms on both bodies. Thus the model requires much reduced solar wind collection efficiencies for protons and alpha particles. Some peculiarities of the Mercury He and H atmospheres might possibly be explained by the nature of the gas-surface coupling.

Shemansky, D. E.↗
NASA NTRS1979

Analysis of beam-like lattice trusses

A simple procedure is presented for predicting the thermoelastic and free vibration responses of large repetitive beam-like trusses. The procedure is based on replacing the original lattice structure by an equivalent continuum beam model and obtaining closed-form (exact) solutions for the beam model. The equivalent beam model accounts for warping and shear deformation in the plane of the cross-section and is characterized by its thermoelastic strain and kinetic energies, from which the equations of motion and constitutive relations can be derived. The high accuracy of the results obtained by the proposed approach is demonstrated by means of numerical examples.

Noor, K.↗