Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interfacial resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Recent Developments and Challenges in Hybrid Solid Electrolytes for Lithium-Ion Batteries

Lithium-ion batteries (LIBs) have attracted worldwide research interest due to their high energy density and long cycle life. Solid-state LIBs improve the safety of conventional liquid-based LIBs by replacing the flammable organic electrolytes with a solid electrolyte. Among the various types of solid electrolytes, hybrid solid electrolytes (HSEs) demonstrate great promise to achieve high ionic conductivity, reduced interfacial resistance between the electrolyte and electrodes, mechanical robustness, and excellent processability due to the combined advantages of both polymer and inorganic electrolyte. This article summarizes recent developments in HSEs for LIBs. Approaches for the preparation of hybrid electrolytes and current understanding of ion-transport mechanisms are discussed. The main challenges including unsatisfactory ionic conductivity and perspectives of HSEs for LIBs are highlighted for future development. The present review provides insights into HSE development to allow a more efficient and target-oriented future endeavor on achieving high-performance solid-state LIBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Titanium Nitride as an Intermetallic Diffusion Barrier for Hydrogen Permeation in Palladium–Vanadium Composite Membranes

Hydrogen purification is a critical industrial process, and there are ongoing efforts to develop low-cost alternatives to palladium foil membranes. Titanium nitride (TiN) is studied as an interdiffusion barrier to enable hydrogen permeation in composite palladium–vanadium membranes. TiN was deposited via reactive sputtering, and films with the desired (200) orientation were obtained in the metallic regime at 400 °C under a 200 V bias to the substrate. The permeability of thin-film TiN was determined with palladium-based sandwich structures. TiN layers up to 10 nm resulted in a minimal decrease in flux (~20%) relative to a freestanding PdCu foil, which was attributed to the interfacial resistance. At greater thicknesses, the TiN layer was rate-limiting, and it was found that the effective permeability of the sputtered TiN thin films was ~6 × 10−12 mol s−1 m−1 Pa−0.5. Composite Pd|TiN|V|TiN|Pd membranes exhibited permeability values up to three times greater than pure palladium, exhibiting stability at 450 °C for over 100 h, with the lack of intermetallic diffusion and alloy formation being confirmed with XRD. The membranes were unstable at 500 °C, which was attributed to the instability of the thin Pd layer and loss of catalytic activity.

Biochemistry & Molecular Biology↗
NASA NTRS1982

Non-isothermal effects on SO2 absorption by water droplets. I - Model development. II - Results and discussion

An analytic model of SO2 absorption in a falling water droplet is developed and a simulation of SO2 washout is performed. Nonisothermic effects on drop growth, droplet physical parameters, reaction rates, and multicomponent diffusion are treated in the model. The gas-liquid interface is assumed to be at equilibrium, and interfacial resistance is negligible. Raindrops are simulated as falling from a 2 km height through an atmospheric region containing SO2. The droplets decrease in size from evaporation and cooling, and their slightly basic pH aids SO2 absorption. The simulation indicates higher SO2 absorption at higher altitudes, and desorption may occur at ground level. Isothermal effects are concluded to be significant, and quantification of effects will depend on further modelling.

Reda, M.↗
NASA NTRS1995

Molecular dynamics studies of simple membrane-water interfaces: Structure and functions in the beginnings of cellular life

Molecular dynamics computer simulations of the structure and functions of a simple membrane are performed in order to examine whether membranes provide an environment capable of promoting protobiological evolution. Our model membrane is composed of glycerol 1-monooleate. It is found that the bilayer surface fluctuates in time and space, occasionally creating thinning defects in the membrane. These defects are essential for passive transport of simple ions across membranes because they reduce the Born barrier to this process by approximately 40%. Negative ions are transferred across the bilayer more readily than positive ions due to favorable interactions with the electric field at the membrane-water interface. Passive transport of neutral molecules is, in general, more complex than predicted by the solubility-diffusion model. In particular, molecules which exhibit sufficient hydrophilicity and lipophilicity concentrate near membrane surfaces and experience 'interfacial resistance' to transport. The membrane-water interface forms an environment suitable for heterogeneous catalysis. Several possible mechanisms leading to an increase of reaction rates at the interface are discussed. We conclude that vesicles have many properties that make them very good candidates for earliest protocells. Some potentially fruitful directions of experimental and theoretical research on this subject are proposed.

Pohorille, Andrew↗
NASA NTRS2015

Consideration of Conductive Motor Winding Materials at Room and Elevated Temperatures

A brief history of conductive motor winding materials is presented, comparing various metal motor winding materials and their properties in terms of conductivity, density and cost. The proposed use of carbon nanotubes (CNTs) and composites incorporating CNTs is explored as a potential way to improve motor winding conductivity, density, and reduce motor size which are important to electric aircraft technology. The conductivity of pure Cu, a CNT yarn, and a dilute Cu-CNT composite was measured at room temperature and at several temperatures up to 340 C. The conductivity of the Cu-CNT composite was about 3 percent lower than pure copper's at all temperatures measured. The conductivity of the CNT yarn was about 200 times lower than copper's, however, the yarn's conductivity dropped less with increasing temperature compared to Cu. It is believed that the low conductivity of the yarn is due primarily to high interfacial resistances and the presence of CNTs with low, semiconductor like electrical properties (s-CNT). It is believed the conductivity of the CNT-Cu composite could be improved by not using s-CNT, and instead using only CNTs with high, metallic like electrical properties (m-CNT); and by increasing the vol% m-CNTs.

yarns↗
DOE OSTI2023

Sodium electrochemical interfaces with NaSICON-type ceramics

The present invention is directed to the modification of sodium electrochemical interfaces to improve performance of NaSICON-type ceramics in a variety of electrochemical applications. Enhanced mating of the separator-sodium interface by means of engineered coatings or other surface modifications results in lower interfacial resistance and higher performance at increased current densities, enabling the effective operation of molten sodium batteries and other electrochemical technologies at low and high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Methods of fabricating porous ceramic electrodes for solid state battery applications

Compositions and methods for the fabrication of electrode and porous lithium-garnet electrolyte scaffolds for use in solid state batteries and other devices are provided. The methods produce porous structures using phase inversion or high shear compaction processes to fabricate a solid-state battery electrode material from LLZO electrolytes. Engineered electrode structures with a porous scaffold of solid electrolyte material provide lower interfacial resistances and a mechanical support for a thin solid electrode layer improving performance.

Tucker, Michael↗
DOE OSTI2026

Tunable Interfacial to Filamentary Resistive Switching Mechanism in Room-Temperature-Grown Amorphous YBa 2 Cu 3 O x with Excess Cu Addition

Resistive switching technologies have the potential not only to create large efficiency gains in computer memory but also to revolutionize emerging fields such as neuromorphic computing. In this paper, we report on novel resistive switching behavior in devices made from room-temperature-grown Cu-rich amorphous YBa 2 Cu 3 O x (YBCO) films, a material otherwise well-known as a high-temperature superconductor. In Nb:STO substrate/amorphous YBCO film (≈200 nm)/metallic Cu (15 nm)/metallic Pt (15 nm) devices, we demonstrate that the resistive switching can be tuned between mechanisms involving extended areas of the YBCO/electrode interface and a single-point filamentary mechanism simply by changing the Cu content of the deposition target and hence in the films. Changing the Cu content can also be used to optimize the properties of the devices further, with devices with an added 15 mol % of Cu in YBCO initially providing an on/off ratio >100, switching endurance potential >6500 cycles, and state retention >2 × 10 4 s, all at low switching fields of 0.3 MV/cm. The amalgam of promising resistive switching properties, fast growth (150 nm/min) at room temperature, and tuneability of the switching mechanism indicates the strong potential of this proof-of-concept amorphous system for future memory applications.

Cu↗
DOE OSTI2024

Enhanced Radiation Damage Tolerance of Amorphous Interphase and Grain Boundary Complexions in Cu-Ta

Amorphous interfacial complexions are particularly resistant to radiation damage and have been primarily studied in alloys with good glass-forming ability, yet recent reports suggest that these features can form even in immiscible alloys such as Cu-Ta under irradiation. In this work, the mechanisms of damage production and annihilation due to primary knock-on atom collisions are investigated for amorphous interphase and grain boundaries in a Cu-Ta alloy using atomistic simulations. Amorphous complexions, in particular amorphous interphase complexions that separate Cu and Ta grains, result in less residual defect damage than their ordered counterparts. Stemming from the nanophase chemical separation in this alloy, the amorphous complexions exhibit a highly heterogeneous distribution of atomic excess volume, as compared to a good glass former like Cu-Zr. Complexion thickness, a tunable structural descriptor, plays a vital role in damage resistance. Thicker interfacial films are more damage-tolerant because they alter the defect production rate due to differences in intrinsic displacement threshold energies during the collision cascade. Overall, the findings of this work highlight the importance of interfacial engineering in enhancing the properties of materials operating in radiation-prone environments and the promise of amorphous complexions as particularly radiation damage-tolerant microstructural features.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Improvement of thermal contact resistance by carbon nanotubes and nanofibers

Interfacial thermal resistance results of various nanotube and nanofiber coatings, prepared by chemical vapor deposition (CVD) methods, are reported at relatively low clamping pressures. The five types of samples examined include multi-walled and single-walled nanotubes growth by CVD, multi-walled nanotubes grown by plasma enhanced CVD (PECVD) and carbon nanofibers of differing aspect ratio grown by PECVD. Of the samples examined, only high aspect ratio nanofibers and thermally grown multi-walled nanotubes show an improvement in thermal contact resistance. The improvement is approximately a 60% lower thermal resistance than a bare Si-Cu interface and is comparable to that attained by commercially available thermal interface materials.

Evaluation Studies↗
DOE OSTI2020

Expression of interfacial Seebeck coefficient through grain boundary engineering with multi-layer graphene nanoplatelets

Energy filtering has been a long-sought strategy to enhance a thermoelectric material's figure of merit zT through improving its power factor. Here we show a composite of multi-layer graphene nanoplatelets (GNP) and n-type Mg 3 Sb 2 leads to the expression of an energy filtering like effect demonstrated by an increase in the material's Seebeck coefficient and maximum power factor, without impact on the material's carrier concentration. We analyse these findings from the perspective of a heterogeneous material consisting of grain and grain boundary phases, instead of a more traditional and common analysis that assumes a homogeneously transporting medium. An important implication of this treatment is that it leads to the development of an interfacial Seebeck coefficient term, which can explain the observed increase in the material's Seebeck coefficient. The contribution of this interfacial Seebeck coefficient to the overall Seebeck coefficient is determined by the relative temperature drop across the grain boundary region compared to that of the bulk material. In Te doped Mg 3 Sb 2 we show the introduction of GNP increases the interfacial thermal resistance of grain boundaries, enhancing the contribution of the interfacial Seebeck coefficient arising from grain boundaries to the overall Seebeck coefficient. Without significant detriment to the electrical conductivity this effect results in a net increase in maximum power factor. This increased interfacial thermal resistance also leads to the synergistic reduction of the total thermal conductivity. As a result, we enhance zT of the Mg 3 Sb 2 to a peak value of 1.7 near 750 K. Considering the two-dimensional nature of the grain boundary interface, this grain boundary engineering strategy could be applied to a few thermoelectric systems utilizing various two-dimensional nanomaterials.

42 ENGINEERING↗
DOE OSTI2026

Coupled Interfacial Kinetics and Transport Resistances Govern High-Current Behavior in Bipolar Membranes

Bipolar membranes (BPMs) enable electrochemical systems that operate across large pH gradients; however, high-current operation is often limited by voltage losses whose origins remain difficult to resolve in membrane−electrode assemblies. Here, we combine electrochemical impedance spectroscopy with distribution of relaxation times (EIS–DRT) analysis and operando synchrotron X-ray diffraction to examine interfacial polarization, membrane hydration, and transport in commercial and synthesized BPMs. EIS–DRT isolates the BPM-associated interfacial contribution and shows that the commercial BPM exhibits larger water-dissociation-associated overpotentials than the synthesized BPM. Operando hydration mapping shows that both membranes retain water at the bipolar junction during high-current operation, while anode-adjacent hydration gradients are more pronounced in the commercial membrane. These results indicate that high-current voltage losses are not governed by junction water starvation alone but by coupled interfacial polarization and transport resistances.

36 MATERIALS SCIENCE↗
DOE OSTI2022

How the Hydrophobic Interface between a Perfluorosulfonic Acid Polymer and Water Vapor Controls Membrane Hydration

Stable hydration in perfluorinated polyelectrolyte membranes such as Nafion is essential to maintain good ion conductivity and manage permeation, especially in vapor-fed devices where water content depends on relative humidity in a gas stream. Extensive studies in the literature have shown that Nafion hydration in water vapor is controlled by its interfacial transport resistance. Nafion forms a fluorine-rich layer at the polymer-gas interface, and it has been proposed that this layer blocks water transport due to its hydrophobicity. To develop a molecular-level description of the physics underlying transport resistance in this system, we have performed a computational reaction-diffusion kinetics study of water evaporation from Nafion. Two distinct models are examined, one mimicking the blocking function proposed in the literature and the other assuming that there is no blocking, treating instead water evaporation as a dynamic balance between uptake from the gas and desorption from the polymer surface. Simulation results are compared to time-dependent infrared data over a range of 100-0% relative humidity from the literature. Only the dynamic model successfully reproduces experimental observations. This indicates that the physical nature of interfacial transport resistance is not slow diffusion across an interfacial layer; rather, it is due to the competition between dehydration and rehydration. The simulation data provide details on the accompanying water distributions throughout the membrane and on interfacial kinetics, showing that they are characterized by strong fluctuations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Phase-Field Modeling of Mechanical Damages in Ceramic Matrix Composites

Developed a phase-field model for mechanical damages in CMCs, which incorporates the CMC microstructures, matrix cracking, fiber breakage, and interfacial sliding. Two types of mechanisms, fiber bridging and fiber pull-out, are considered. The obtained simulation results agree with experimental observations and an analytical solution. Simulation results suggest that the performance of CMCs would be enhanced with thicker fibers, longer fibers, and higher fiber density. Opposite trends of interfacial sliding resistances are suggested for the two types of situations. In reality, a mixture of the two situations may exist, and then an intermediate interfacial sliding resistance may be optimal.

Xue, Fei↗
DOE OSTI2021

Morphology engineering of iridium electrodes via modifying titanium substrates with controllable pillar structures for highly efficient oxygen evolution reaction

Nowadays, Ti is the well-chosen anode substrate material for proton exchange membrane electrolyzer cells (PEMECs) and modifications of the substrate surfaces are essential for the fabrication of highly efficient electrodes. Herein, we introduce the morphology engineering of Ir/Ti electrodes with different acid treatments of hydrochloric acid (HCl) and oxalic acid (OA), and the comparative benefits of these two acid treatment methods are studied from the aspects of their impacts on the morphology, interfacial contact resistance (ICR), and oxygen evolution reaction (OER) performances of resultant electrodes. Notably, compared to the flat surface from OA treatment, Ti substrates with the pillar structure could be successfully achieved via HCl etching. Further, the HCl and the oxalic acid (OA) treatments would reduce the interfacial contact resistance (ICR) to 15.2% and 5.5% of the pristine Ti substrate at 1.38 MPa, respectively. By iridium electrodeposition on Ti substrates, Ir/Ti electrodes with different catalyst loadings are fabricated. With similar low-loadings of about 0.05 mgIr cm –2 , an Ir/Ti electrode with HCl treated substrate exhibits a lower overpotential of ~283 mV at 10 mA cm –2 current density than 305 mV from OA treatment, due to the boosted reaction areas from HCl treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Electrochemical evaluation of the p-Si/conducting polymer interfacial properties

Results are presented from an experimental investigation of the contact resistance and interfacial properties of a p-Si/conducting polymer interface for solar cell applications. The electronic character of the polymer/semiconductor function is determined by studying the electrochemical behavior of both poly(isothianapthene) (PITN) and polypyrrole (PP) in an acetonitrile solution on p-silicon electrodes. The results obtained indicate that while PITN is intrinsically more conductive than PP, neither passivates surface states nor forms ohmic contact.

Nagasubramanian, G.↗