Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “infusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Slippery liquid infused porous surface (SLIPS) condensers for high efficiency air gap membrane distillation

Abstract To address growing water scarcity, we must improve the energy efficiency of thermal desalination technologies such as air gap membrane distillation. However, promising functional materials such as slippery liquid infused porous surfaces have not yet implemented for any desalination technology. Here, we fabricate and test slippery liquid infused porous surfaces (using Krytox 16,256 lubricant and CuO nanostructures) in an air gap membrane distillation apparatus. System-level transport models, validated by experimental data, establish a framework for improving performance through enhanced condensation surfaces. Results are obtained across a range of temperatures (50–80 °C), salinities (5–105 g/kg), and module lengths. We find that small air gap thickness and efficient droplet shedding significantly improves performance. The CuO Krytox process achieves these with a conductive-self-limiting coating, high nanostructure rugosity, strong covalent and metallic bonding, high hydrophobicity, minimal droplet pinning sites, and ultra-low contact angle hysteresis. The greatest efficiency enhancement from SLIPS is derived from the improved droplet shedding, which allows for reduced gap sizes without flooding, and is further augmented by the increased permeate flux.

Yogi, Yashwant S.↗

Physically and chemically stable ionic liquid-infused textured surfaces showing excellent dynamic omniphobicity

A fluorinated and hydrophobic ionic liquid (IL), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide, effectively served as an advantageous lubricating liquid for the preparation of physically and chemically stable omniphobic surfaces based on slippery liquid-infused porous surfaces. Here, we used particulate microstructures as supports, prepared by the chemical vapor deposition of 1,3,5,7-tetramethylcyclotetrasiloxane and subsequent surface modification with (3-aminopropyl)triethoxysilane. Confirmed by SEM and contact angle measurements, the resulting IL-infused microtextured surfaces are smooth and not only water but also various low surface tension liquids can easily slide off at low substrate tilt angles of <5°, even after exposure to high temperature, vacuum, and UV irradiation.

36 MATERIALS SCIENCE↗

Advancing Fusion Research and Development at TAE Technologies Through INFUSE Program

The U.S. Department of Energy’s Innovation Network for Fusion Energy (INFUSE) program serves as a crucial catalyst by fostering public-private partnership that accelerates technological innovation for fusion energy research and development (R&D) in the private sector. Further, this article provides a comprehensive overview of the technical goals and accomplishments of projects awarded to TAE Technologies through the INFUSE program since 2019. We offer high-level perspectives on how these projects have contributed to fusion energy R&D, and we address key challenges encountered during these collaborations.

field-reversed configuration↗

Towards Geospatial Knowledge Graph Infused Neuro-Symbolic AI for Remote Sensing Scene Understanding

Deep learning has proven its effectiveness in numerous tasks for remote sensing scene understanding. However there is an increasing interest to explore fusion of domain-specific background information to the deep neural network to further improve its performance. Remote sensing researchers are also working towards developing models that generalize and adapt to multiple applications. Generalization challenges coupled with the scarcity of large corpora of high-quality noise-free labelled data, have together fueled an interest for leveraging background information. Knowledge graphs serve as excellent choice to represent domain-specific information in a structured, standardized and extensible manner. Integrating symbolic knowledge representations in the form of Knowledge Graph Embedding (KGE) to perform neuro-symbolic reasoning is an emerging research direction promising significant impacts. This vision paper seeks to position ideas and provoke early thoughts toward advancing neuro-symbolic artificial intelligence in the context of geospatial challenges. Specifically, it conceptualizes and elaborates on an architecture for infusing geospatial knowledge from knowledge graph in a deep neural network pipeline. As guiding case studies - land-use land-cover classification, object detection and instance segmentation can benefit from infusing spatio-contextual information with remote sensing imagery. The discussion further reflects on and articulates the challenges and explainable AI opportunities anticipated when scaling and maintaining large-scale geospatial knowledge graphs.

Potnis, Abhishek↗

Isotropic three-dimensional MRI-Fricke-infused gel dosimetry

Purpose: Fricke-infused gel has been shown to be a simple and attainable method for the conformal measurement of absorbed radiation dose. Nevertheless, its accuracy is seriously hindered by the irreversible ferric ion diffusion during magnetic resonance imaging, particularly when three-dimensional (3D) dose measurement in radiosurgery is considered. In this study, the authors developed a fast three-dimensional spin-echo based Fricke gel dosimetry technique to reduce the adverse effects of ferric ion diffusion and to obtain an accurate isotropic 3D dose measurement. Methods: A skull shaped phantom containing Fricke-infused gel was irradiated using Leksell Gamma Knife. The rapid image-based dosimetry technique was applied with the use of a 3D fast spin-echo magnetic resonance imaging sequence. The authors mathematically derived and experimentally validated the correlations between dose-response characteristics and parameters of the 3D fast spin-echo MR imaging sequence. Absorbed dose profiles were assessed and compared to the calculated profiles given by the Gamma Knife treatment planning system. Coefficient of variance (CV%) and coefficient of determination (R{sup 2}) were used to evaluate the precision of dose-response curve estimation. The agreement between the measured and the planned 3D dose distributions was quantified by gamma-index analysis of two acceptance criteria. Results: Proper magnetic resonance imaging parameters were explored to render an accurate three-dimensional absorbed dose mapping with a 1 mm{sup 3} isotropic image resolution. The efficacy of the dose-response estimation was approved by an R{sup 2} > 0.99 and an average CV% of 1.6%. Average gamma pass-rate between the experimentally measured and GammaPlan calculated dose distributions were 83.8% and 99.7% for 2%/2 and 3%/3 mm criteria, respectively. Conclusions: With the designed MR imaging sequence and parameters, total 3D MR acquisition time was confined to within 20 min postirradiation, during which time ferric ion diffusion effects were negligible, thus enabling an accurate 3D radiation dose measurement.

60 APPLIED LIFE SCIENCES↗

Preparation and electrical conductivity of graphitic carbon-infused copper alloys

By electron-beam (e-beam) melting, we prepared 0.4 wt% carbon-infused copper (CuCv4), and a copper control without carbon addition (CuCv0). Scanning electron microscopy and helium ion microscopy (HIM) were performed on the as-solidified surface, fracture surface, and ion-polished surface of the CuCv4 sample. The results revealed that graphitic carbon flakes cover the as-solidified surface, and carbon nanoparticles and clusters exist in the fracture and ion-polished surfaces. HIM on the ion-polished surface revealed a unique ripple-shaped feature, which is possibly associated with the infusion of carbon nanoribbons in the copper matrix. The bulk densities were measured to be 8.86 and 8.53 g/cm 3 , which correspond to relative densities of 98.9% and 96.4% for the CuCv0 and CuCv4 samples, respectively. Also, apparent electrical conductivities were measured to be 56.9 and 57.5 MS/m, respectively, for the e-beam melted CuCv0 and CuCv4 samples. These values correspond to true electrical conductivities of 100.5% IACS (International Annealed Copper Standard) and 107.4% IACS after correction for the porosity. Thus, our results reveal remarkable promise of using covetic copper for the next generation conductors in energy applications from microelectronic devices to high-power transmission cables.

36 MATERIALS SCIENCE↗

New Insight on Nitrogen Infusion Revealed by Successive Nanometric Material Removal

In this study we present new insight on low temperature nitrogen infusion on bulk niobium superconducting radio-frequency (SRF) cavities. Nitrogen infusion is a thermal treatment recently discovered at Fermilab that allows to reach high accelerating gradients, of the order of 45MV/m, with high Q-factors, of the order of 2 · 10¹⁰. Detailed depth dependent RF studies (by means of subsequent HF rinses) and comparisonwith SIMS results pinpointed interstitial nitrogen as the responsible for the improved performance and uncovered the extension of its profile inside the material.

43 PARTICLE ACCELERATORS↗

Modeling HIV-1 Within-Host Dynamics After Passive Infusion of the Broadly Neutralizing Antibody VRC01

VRC01 is a broadly neutralizing antibody that targets the CD4 binding site of HIV-1 gp120. Passive administration of VRC01 in humans has assessed the safety and the effect on plasma viremia of this monoclonal antibody (mAb) in a phase 1 clinical trial. After VRC01 infusion, the plasma viral load in most of the participants was reduced but had particular dynamics not observed during antiretroviral therapy. In this paper, we introduce different mathematical models to explain the observed dynamics and fit them to the plasma viral load data. Based on the fitting results we argue that a model containing reversible Ab binding to virions and clearance of virus-VRC01 complexes by a two-step process that includes (1) saturable capture followed by (2) internalization/degradation by phagocytes, best explains the data. This model predicts that VRC01 may enhance the clearance of Ab-virus complexes, explaining the initial viral decay observed immediately after antibody infusion in some participants. Because Ab-virus complexes are assumed to be unable to infect cells, i.e., contain neutralized virus, the model predicts a longer-term viral decay consistent with that observed in the VRC01 treated participants. By assuming a homogeneous viral population sensitive to VRC01, the model provides good fits to all of the participant data. However, the fits are improved by assuming that there were two populations of virus, one more susceptible to antibody-mediated neutralization than the other.

60 APPLIED LIFE SCIENCES↗

Programmable physiological infusion

A programmable physiological infusion device and method are provided wherein a program source, such as a paper tape, is used to actuate an infusion pump in accordance with a desired program. The system is particularly applicable for dispensing calcium in a variety of waveforms.

Howard, W. H.↗

Fluid infusion system

Performance testing carried out in the development of the prototype zero-g fluid infusion system is described and summarized. Engineering tests were performed in the course of development, both on the original breadboard device and on the prototype system. This testing was aimed at establishing baseline system performance parameters and facilitating improvements. Acceptance testing was then performed on the prototype system to verify functional performance. Acceptance testing included a demonstration of the fluid infusion system on a laboratory animal.

Source record↗

Effect of hypovolemia, infusion, and oral rehydration on plasma electrolytes, ADH, renin activity, and +G/z/ tolerance

Effects on plasma volume, electrolyte shifts, and +G(z) tolerance induced by: (1) blood withdrawal; (2) blood infusion; and (3) oral fluid intake, were determined at 0.5 G/min in centrifugation tests of six ambulatory male patients, aged 21 to 27 yrs. Hypovolemia induced by withdrawal of 400 ml blood, blood infusion followed by repeated centrifugation, effects of consuming an isotonic drink (0.9% NaCl) to achieve oral rehydration, and donning of red adaptation goggles were studied for effects on acceleration tolerance, pre-acceleration and post-acceleration plasma renin activity (PRA) and plasma vasopressin levels. No significant changes in post-acceleration PRA compared to pre-acceleration PRA were found, and administration of oral rehydration is found as effective as blood replacement in counteracting hypovolemic effects.

Greenleaf, J. E.↗

Effect of chronic intracerebroventricular angiotensin II infusion on vasopressin release in rats

The effects of the chronic infusion of angiotensin II into the lateral cerebral ventricle on the release of arginine vasopressin in rats are investigated. Rats were subjected to a continuous infusion of angiotensin at a rate of 1 microgram/h for five days, during which they were offered water, isotonic saline or hypertonic saline ad libitum or 40 ml water/day, and fluid intake, changes in body weight, plasma sodium ion concentrations and plasma and pituitary arginine vasopressin levels were measured. Angiotensin II is found to increase the fluid intake of rats given isotonic saline and decrease plasma sodium ion levels with no changes in plasma or pituitary arginine vasopressin in those given water or isotonic saline. However, in rats given hypertonic saline, plasma sodium concentrations remained at control levels while plasma vasopressin increased, and in water-restricted rats the effects of angiotensin II were intermediate. Results thus demonstrate that angiotensin II-stimulated arginine vasopressin release is reduced under conditions in which plasma sodium ion concentration becomes dilute, compatible with a central role of angiotensin in the regulation of salt and water balance.

Sterling, G. H.↗

Infusion of instrumentation technology (engine plume diagnostics) into operational test programs

The following subject areas are covered: hierarchy of civil space technology program; evolution of technology development; technology validation process; potential impacts; impacts of technology infusion into flight certifications; potential solutions; examples of current technology infusion into flight certification; OAET-CSTI health monitoring and controls; and challenges for future space vehicle propulsion systems.

Woods, E. G.↗

An infiltration/cure model for manufacture of fabric composites by the resin infusion process

A 1-D infiltration/cure model was developed to simulate fabrication of advanced textile composites by the resin film infusion process. The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the infiltration flow front position as a function of time. The model also predicts the final panel thickness, fiber volume fraction, and resin mass for full saturation as a function of compaction pressure. Composite panels were fabricated using the RTM (Resin Transfer Molding) film infusion technique from knitted, knitted/stitched, and 2-D woven carbon preforms and Hercules 3501-6 resin. Fabric composites were fabricated at different compaction pressures and temperature cycles to determine the effects of the processing on the properties. The composites were C-scanned and micrographed to determine the quality of each panel. Advanced cure cycles, developed from the RTM simulation model, were used to reduce the total cure cycle times by a factor of 3 and the total infiltration times by a factor of 2.

Weideman, Mark H.↗

Software Engineering Technology Infusion Within NASA

Abstract technology transfer is of crucial concern to both government and industry today. In this paper, several software engineering technologies used within NASA are studied, and the mechanisms, schedules, and efforts at transferring these technologies are investigated. The goals of this study are: 1) to understand the difference between technology transfer (the adoption of a new method by large segments of an industry) as an industry-wide phenomenon and the adoption of a new technology by an individual organization (called technology infusion); and 2) to see if software engineering technology transfer differs from other engineering disciplines. While there is great interest today in developing technology transfer models for industry, it is the technology infusion process that actually causes changes in the current state of the practice.

Zelkowitz, Marvin V.↗

Developing An Autonomy Infusion Infrastructure for Robotic Exploration

Future robotic exploration missions will require autonomy in order to accomplish mission goals for operational efficiency and science return. For example, it will require three communication cycles for the Mars Exploration Rovers, Spirit and Opportunity, to place an instrument on a science target. Reducing this time necessitates highly accurate navigation, obstacle avoidance, target tracking, target analysis, manipulation, and fault diagnosis. Technologies to address these and other operational elements are currently being developed at NASA and within academia. However, infusion into missions has always been a difficult task for researchers. In order to keep risk down, mission managers are reluctant to include new technologies unless they have undergone extensive testing and verification under flight-realistic conditions. Furthermore, infusion of new technologies into missions is made more difficult by the variety of software frameworks under which these technologies are developed. Missions would like to see competing solutions demonstrated on a common platform so that they can compare performance and choose the solution best suited to their application.

Bualat, Maria G.↗

The chronic infusion of nicotine into the developing chick embryo does not alter the density of (-)-[3H]nicotine-binding sites or vestibular function

(-)-Nicotine (1.2 mg/day) or saline was infused into chick embryos (Gallus domesticus) for 10 days beginning 12 h beyond the eight day of incubation (E8 + 12 h). Twelve h beyond the eighteenth day of incubation (E18 + 12 h), the eggs were opened to access the embryos and subcutaneous skull electrodes placed. Short latency vestibular response thresholds and input/output functions were determined to assess neurophysiological consequences of chronic nicotine administration. Samples of serum and extraembryonic (amniotic and albumen) fluid were analyzed by gas chromatography-mass spectrometry to determine the levels of nicotine and its major metabolite, cotinine. The brains were removed and divided into diencephalon and mesencephalon and the density of (-)-[3H]nicotine binding sites in each brain area was measured. Nicotine and cotinine were found in the serum and extraembryonic fluid, but nicotinic receptors were not up-regulated in the brains of animals infused with nicotine in comparison to controls. Vestibular response thresholds also did not differ between nicotine-treated and control animals.

NASA Discipline Neuroscience↗

Infusing Software Assurance Research Techniques into Use

Research in the software engineering community continues to lead to new development techniques that encompass processes, methods and tools. However, a number of obstacles impede their infusion into software development practices. These are the recurring obstacles common to many forms of research. Practitioners cannot readily identify the emerging techniques that may benefit them, and cannot afford to risk time and effort evaluating and trying one out while there remains uncertainty about whether it will work for them. Researchers cannot readily identify the practitioners whose problems would be amenable to their techniques, and, lacking feedback from practical applications, are hard-pressed to gauge the where and in what ways to evolve their techniques to make them more likely to be successful. This paper describes an ongoing effort conducted by a software engineering research infusion team established by NASA s Software Engineering Initiative to overcome these obstacles. .

Pressburger, Thomas↗