Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hole seeding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

103 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Temperature Evolution in Excitonic Absorptions of Cd(0.96)Zn(0.04) Materials

We report cryogenic optical properties of Cd(0.96)Zn(0.04)Te wafers that are used as substrate seed layers in HgCdTe focal-plane array detectors. These studies are motivated by the fact that the substrate optical properties influence the overall detector performance. The studies consist of measuring the sample frequency dependent transmittance (T) and reflectance (R) above and below the optical band-gap in the UV/Visible and infrared frequency ranges, and with temperature variation of the sample from 5 to 300 K. These measurements show that the optical gap near 1.49 eV at 300 K increases to 1.62 eV at 5 K. Finally, we observe sharp absorption peaks near this gap energy at low temperatures. The close proximity of these peaks to the optical transition threshold suggests that they originate from the creation of bound electron-hole pairs or excitons. The decay of these excitonic absorptions may contribute to a photoluminescence and transient background response of these back-illuminated HgCdTe CCD detectors.

Quijada, Manuel A.↗
NASA NTRS2009

Discovery of Photon Index Saturation in the Black Hole Binary GRS 1915+105

We present a study of the correlations between spectral, timing properties and mass accretion rate observed in X-rays from the Galactic Black Hole (BH) binary GRS 1915+105 during the transition between hard and soft states. We analyze all transition episodes from this source observed with Rossi X-ray Timing Explorer (RXTE), coordinated with Ryle Radio Telescope (RT) observations. We show that broad-band energy spectra of GRS 1915+105 during all these spectral states can be adequately presented by two Bulk Motion Comptonization (BMC) components: a hard component (BMC1, photon index Gamma(sub 1) = 1.7 -- 3.0) with turnover at high energies and soft thermal component (BMC2, Gamma(sub 2) = 2.7 -- 4.2) with characteristic color temperature < or = 1 keV, and the red-skewed iron line (LAOR) component. We also present observable correlations between the index and the normalization of the disk "seed" component. The use of "seed" disk normalization, which is presumably proportional to mass accretion rate in the disk, is crucial to establish the index saturation effect during the transition to the soft state. We discovered the photon index saturation of the soft and hard spectral components at values of < or approximately equal 4.2 and 3 respectively. We present a physical model which explains the index-seed photon normalization correlations. We argue that the index saturation effect of the hard component (BMC1) is due to the soft photon Comptonization in the converging inflow close to 1311 and that of soft component is due to matter accumulation in the transition layer when mass accretion rate increases. Furthermore we demonstrate a strong correlation between equivalent width of the iron line and radio flux in GRS 1915+105. In addition to our spectral model components we also find a strong feature of "blackbody-like" bump which color temperature is about 4.5 keV in eight observations of the intermediate and soft states. We discuss a possible origin of this "blackbody-like" emission.

Titarchuk, Lev↗
NASA NTRS2008

PLIF Visualization of Active Control of Hypersonic Boundary Layers Using Blowing

Planar laser-induced fluorescence (PLIF) imaging was used to visualize the boundary layer flow on a 1/3-scale Hyper-X forebody model. The boundary layer was perturbed by blowing out of orifices normal to the model surface. Two blowing orifice configurations were used: a spanwise row of 17-holes spaced at 1/8 inch, with diameters of 0.020 inches and a single-hole orifice with a diameter of 0.010 inches. The purpose of the study was to visualize and identify laminar and turbulent structures in the boundary layer and to make comparisons with previous phosphor thermography measurements of surface heating. Jet penetration and its influence on the boundary layer development was also examined as was the effect of a compression corner on downstream boundary layer transition. Based upon the acquired PLIF images, it was determined that global surface heating measurements obtained using the phosphor thermography technique provide an incomplete indicator of transitional and turbulent behavior of the corresponding boundary layer flow. Additionally, the PLIF images show a significant contribution towards transition from instabilities originating from the underexpanded jets. For this experiment, a nitric oxide/nitrogen mixture was seeded through the orifices, with nitric oxide (NO) serving as the fluorescing gas. The experiment was performed in the 31-inch Mach 10 Air Tunnel at NASA Langley Research Center.

Bathel, Brett F.↗
DOE OSTI2020

Measurements of the Flow in the Vicinity of an Additively Manufactured Turbine Leading-Edge Using X-Ray Particle Tracking Velocimetry

X-ray particle tracking velocimetry (PTV) is performed, for the first time, to measure the velocity field inside a leading-edge of a turbine blade made by laser-additive-manufacturing (LAM) process. The traditional showerhead holes were replaced by a porous matrix in the leading-edge. The flow through such a leading-edge piece cannot be faithfully recreated by traditional prototype testing methods due to the surface roughness and imperfections caused by LAM process. Hence, direct measurement is the only option. However, it is difficult to measure flow inside such pieces with traditional velocimetry measurements due to the existence of metallic walls. Moreover, small internal size and high flow speeds call for a measurement technique with high spatial and temporal resolutions. To address these issues, we performed time-resolved X-ray PTV using the Advanced Photon Source (APS) synchrotron facility at the Argonne National Laboratory (ANL). A hydraulic system was constructed to run water, mixed with seeding particles, through the leading-edge piece. A high-speed camera captured the images of the seeding particles, which were later processed to create particle tracks. The time-averaged velocity field showed distinct pairs of vortices located in front of the porous outlet inside the leading-edge piece. The inlet channel showed reversed flow due to partial obstruction by the porous inlet of the test piece. Such knowledge of the flow field inside a leading-edge of a turbine blade will help us to design better cooling paths leading to higher cooling efficiency and increased life-span of a turbine blade.

42 ENGINEERING↗
DOE OSTI2025

Bulk Motions in the Black Hole Jet Sheath as a Candidate for the Comptonizing Corona

Abstract Using two-dimensional general relativistic resistive magnetohydrodynamic simulations, we investigate the properties of the sheath separating the black hole jet from the surrounding medium. We find that the electromagnetic power flowing through the jet sheath is comparable to the overall accretion power of the black hole. The sheath is an important site of energy dissipation as revealed by the copious appearance of reconnection layers and plasmoid chains. About 20% of the sheath power is dissipated between 2 and 10 gravitational radii. The plasma in the dissipative sheath moves along a nearly paraboloidal surface with transrelativistic bulk motions dominated by the radial component, whose dimensionless 4-velocity is ∼1.2 ± 0.5. In the frame moving with the mean (radially dependent) velocity, the distribution of stochastic bulk motions resembles a Maxwellian with an “effective bulk temperature” of ∼100 keV. Scaling the global simulation to Cygnus X-1 parameters gives a rough estimate of the Thomson optical depth across the jet sheath, ∼0.01–0.1, and it may increase in future magnetohydrodynamic simulations with self-consistent radiative losses. These properties suggest that the dissipative jet sheath may be a viable “coronal” region, capable of upscattering seed soft photons into a hard, nonthermal tail, as seen during the hard states of X-ray binaries and active galactic nuclei.

Sridhar, Navin (ORCID:0000000255199550)↗
NASA NTRS2012

GX 3+1: The Stability of Spectral Index as a Function of Mass Accretion Rate

We present an analysis of the spectral and timing properties observed in X-rays from neutron star (NS) binary GX 3+1 (4U 1744-26) during long-term transitions between the faint and bright phases superimposed on short-term transitions between lower banana (LB) and upper banana (UB) branches in terms of its color-color diagram, We analyze all observations of this source obtained with the Rossi X-ray Timing Explorer and BeppoSAX satellites, We find that the X-ray broadband energy spectra during these spectral transitions can be adequately reproduced by a composition of a low-temperature blackbody component, a Comptonized component (COMPTB), and Gaussian component We argue that the electron temperature kTe of the Compton cloud monotonically increases from 2.3 keY to 4.5 keY, when GX 3+1 makes a transition from UB to LB. We also detect an evolution of noise components (a very low frequency noise and a high-frequency noise) during these LB-UB transitions. Using a disk seed photon normalization of COMPTB, which is proportional to the mass accretion rate, we find that the photon power-law index Gamma is almost constant (Gamma = 2.00 +/- 0.02) when mass accretion rate changes by factor four. In addition, we find that the emergent spectrum is dominated by the strong Comptonized component We interpret this quasi-stability of the index Gamma and a particular form of the spectrum in the framework of a model in which the energy release in the transition layer located between the accretion disk and NS surface dominates that in the disk. Moreover, this index stability effect now established for GX 3+ I was previously found in the atoll source 4U 1728-34 and suggested for a number of other low-mass X-ray NS binaries. This intrinsic behavior of NSs, in particular for atoll sources, is fundamentally different from that seen in black hole binary sources where the index monotonically increases during spectral transition from the low state to the high state and then finally saturates at high values of mass accretion rate.

Seifana, Elena↗
DOE OSTI2021

GW190521 from the Merger of Ultradwarf Galaxies

We present an alternative formation scenario for the gravitational wave event GW190521 that can be explained as the merger of central black holes (BHs) from two ultradwarf galaxies of stellar mass ∼105–106 M⊙, which had themselves previously undergone a merger. The GW190521 components’ masses of 85-14+21 M⊙ and 66-18+17 M⊙ challenge standard stellar evolution models, as they fall in the so-called mass gap. We demonstrate that the merger history of ultradwarf galaxies at high redshifts (1≲z≲2) matches well the LIGO-Virgo inferred merger rate for BHs within the mass range of the GW190521 components, resulting in a likely time delay of ≲4 Gyr considering the redshift of this event. We further demonstrate that the predicted timescales are consistent with expectations for central BH mergers, although with large uncertainties due to the lack of high-resolution simulations in low-mass dwarf galaxies. Our findings show that this BH production and merging channel is viable and extremely interesting as a new way to explore galaxies’ BH seeds and galaxy formation. We recommend this scenario be investigated in detail with simulations and observations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2000

The Relativistic Iron Line Profile in the Seyfert 1 Galaxy IC4329a

We present simultaneous ASCA and RXTE data on the bright Seyfert 1 galaxy IC4329a. The iron line is significantly broadened, but not to the extent expected from an accretion disk which extends down to the last stable orbit around a black hole. We marginally detect a narrow line component, presumably from the molecular torus, but, even including this gives a line profile from the accretion disk which is significantly narrower that that seen in MCG-6-30-15, and is much more like that seen from the low/hard state galactic black hole candidates. This is consistent with the inner disk being truncated before the last stable orbit, forming a hot flow at small radii as in the ADAF models. However. we cannot rule out the presence of an inner disk which does not contribute to the reflected spectrum. either because of extreme ionisation suppressing the characteristic atomic features of the reflected spectrum or because the X-ray source is intrinsically anisotropic, so it does not illuminate the inner disk. The source was monitored by RXTE every 2 days for 2 months, and these snapshot spectra show that there is intrinsic spectral variability. The data are good enough to disentangle the power law from the reflected continuum and we see that the power law softens as the source brightens. The lack of a corresponding increase in the observed reflected spectrum implies that either the changes in disk inner radial extent/ionization structure are small, or that the variability is actually driven by changes in the seed photons which are decoupled from the hard X-ray mechanism.

Done, C.↗
NASA NTRS1976

Radiative behavior of a gas layer seeded with soot

Gaseous film or transpiration cooling may be used to reduce the heat flux reaching the wall of a container or other structures. Such a protective film, however, is usually not effective for reducing radiative heat transfer as most gases are transparent in the temperature range for which solid walls can exist. Therefore, heat transfer was examined for a gaseous layer seeded with radiation-absorbing carbon particles (soot) and flowing along a surface. The layer was subjected to an external high temperature source of blackbody radiation. The radiative behavior was found to depend on a parameter containing particle concentration, layer thickness and source temperature. Only a very small particle volume concentration, in the range of .0001, was required to obtain high absorption in a 1-cm-thick layer for typical conditions. The results provide the distance along the surface for which the heat transfer to the wall remains within an acceptable limit and the particles remain below a temperature at which they will melt or vaporize. The wall protection by the layer lasts only until the particles vaporize or the layer becomes so hot that it reradiates substantially to the wall. Depending on the layer mass velocity the protection may be effective for a distance along the wall of only a few layer thickness. Hence, to protect greater wall lengths, it will be necessary to introduce the suspension through multiple slots or holes along the wall.

Siegel, R.↗
NASA NTRS1996

Comparison of Long-Term Storage in Chemical Fixatives on Morphology and Anatomy of Super-Dwarf Wheat

Wheat plants (Triticum aestivum L. cv Super-Dwarf) are grown in the microgravity of space and harvested for morphological and anatomical comparison with those exposed to gravity on earth. Such plants are subjected to relatively long periods of storage in chemical fixatives. Examination, evaluation and verification that the integrity of the vascular system is maintained for extended periods of storage in fixatives are required. McDowell and Trump's [4% Formaldehyde -- 1 % Glutaraldehyde (4F: 1 G)] or Variant I [(Russian Fixative): Formalin: Acetic Acid: Alcohol] fixatives, adjusted to pH 7.2, were placed in Aclam(TM), FilmORap(TM), or FilmOSun(TM) plastic bags on April 4, 1994. Wheat seedlings were harvested on days 9, 28, and 68 and preserved in these fixatives. Subsamples of leaves and/or seeds were taken from these stocks after various times in storage, dehydrated, and embedded in Spurr's, LR White's or Unicryl resin. Semithin (1 mm) and thin (50-70 nm) sections were examined by light and transmission electron microscopy. In a few sections, we have observed a slight plasmolysis of the cytostol in leaf tissue fixed with the Variant I, but overall there seem to be no major artifacts in the anatomical structure. The plasmalemma and other organelles appeared normal in the McDowell and Trump fixative. Use of differential chromophores suggests that LR White or Unicryl resins may give greater flexibility for enzyme localizations at both the light and electron microscopical levels.

Bubenheim, David L.↗
NASA NTRS2003

An Accretion Model for the Growth of the Central Black Holes Associated with Ionization Instability in Quasars

A possible accretion model associated with the ionization instability of quasar disks is proposed to address the growth of the central black hole (BH) harbored in the host galaxy. The evolution of quasars in cosmic time is assumed to change from a highly active state to a quiescent state triggered by the S-shaped ionization instability of the quasar accretion disk. For a given external mass transfer rate supplied by the quasar host galaxy, ionization instability can modify the accretion rate in the disk and separate the accretion flows of the disk into three different phases, like an S-shape. We suggest that the bright quasars observed today are those quasars with disks in the upper branch of the S-shaped instability, and the faint or 'dormant' quasars are simply these systems in the lower branch. The middle branch is the transition state, which is unstable. We assume the quasar disk evolves according to the advection-dominated inflow-outflow solution (ADIOS) configuration in the stable lower branch of the S-shaped instability, and the Eddington accretion rate is used to constrain the accretion rate in the highly active phase. The mass ratio between a BH and its host galactic bulge is a natural consequence of an ADIOS. Our model also demonstrates that a seed BH approx. 2 x 10(exp 6) solar masses similar to those found in spiral galaxies today is needed to produce a BH with a final mass of approx. 2 x 10(exp 8) solar masses.

Lu, Y.↗
DOE OSTI2024

Lifting of two-mode states in the D1-D5 CFT

We consider D1-D5-P states in the untwisted sector of the D1-D5 orbifold CFT where one copy of the seed CFT has been excited by a pair of oscillators, each being either bosonic or fermionic. While such states are BPS at the orbifold point, they will in general ‘lift’ as the theory is deformed towards general values of the couplings. We compute the expectation value of this lift at second order in the deformation parameter for the above mentioned states. We write this lift in terms of a fixed number of nested contour integrals on a given integrand; this integrand depends on the mode numbers of the oscillators in the state. We evaluate these integrals to obtain the explicit value of the lift for various subfamilies of states. At large mode numbers one observes a smooth increase of the lift with the dimension of the state h; this increase appears to follow a ~ √h behavior similar to that found analytically in earlier computations for other classes of states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Lifting of superconformal descendants in the D1-D5 CFT

We consider D1-D5-P states in the untwisted sector of the D1-D5 orbifold CFT where we excite one copy of the seed CFT with a left-moving superconformal descendant. When the theory is deformed away from this region of moduli space these states can ‘lift’, despite being BPS at the orbifold point. For descendants formed from the supersymmetry $^{Gα}_{Å,–s}$ and R-symmetry $^{Ja}_{–n}$ current modes we obtain explicit results for the expectation value of the lifts for various subfamilies of states at second order in the deformation parameter. A smooth ~ √h behaviour is observed in the lifts of these subfamilies for large dimensions. Using covering space Ward identities we then find a compact expression for the lift of the above $^{Ja}_{–n}$ descendant states valid for arbitrary dimensions. In the large-dimension limit this lift scales as ~ √h, strengthening the conjecture that this is a universal property of the lift of D1-D5-P states. We observe that the lift is not simply a function of the total dimension, but depends on how the descendant level is partitioned amongst modes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗