Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “higher form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

New lunar microcrater evidence against a time varying meteoroid flux

An attempt to measure the relative times of formation of 25 microcraters on lunar rock 60015 is discussed which was carried out as part of a study of the flux of interplanetary dust and possible time variations of that flux over periods of 1000 to 1 million yr. The data obtained could indicate that the formation rate of 100-micron-sized pits was lower in the past as compared with the formation rate of micron-sized pits, that the flux of particles forming 100-micron-sized pits may have varied relative to that of particles forming micron-sized pits, or that 100-micron-sized pits are forming now at a higher rate, relative to the formation rate of accretionary disks, than in the past. The last suggestion is shown to be almost untenable, and the overall results are found to lead to a logical paradox. It is concluded that the attempt probably failed and that the reason for failure raises serious questions regarding the use of lunar rock surfaces as meteoroid detectors.

Hartung, J. B.↗
NASA NTRS1983

Development of V/STOL methodology based on a higher order panel method

The development of a computational technique to predict the complex flowfields of V/STOL aircraft was initiated in which a number of modules and a potential flow aerodynamic code were combined in a comprehensive computer program. The modules were developed in a building-block approach to assist the user in preparing the geometric input and to compute parameters needed to simulate certain flow phenomena that cannot be handled directly within a potential flow code. The PAN AIR aerodynamic code, which is higher order panel method, forms the nucleus of this program. PAN AIR's extensive capability for allowing generalized boundary conditions allows the modules to interact with the aerodynamic code through the input and output files, thereby requiring no changes to the basic code and easy replacement of updated modules.

Bhateley, I. C.↗
NASA NTRS1985

Mobile trace element contents in Jilin chondrite

A determination is conducted of ppm-ppt levels of Co, Se, Ga, Rb, Cs, Te, Bi, Ag, In, Tl, Zn and Cd (arranged empirically in order of increasing mobility at 1000 C) by radiochemical neutron activation analysis in eight Jilin samples of known Ar-40 content and a large vein from one of these. The trace element contents of the vein do not differ markedly from those of Jilin whole-rock samples. Only Rb correlates with Ar-40, possibly due to chance. All elements but Cd are present at levels similar to thdse in H4-6 chondrites with long K/Ar age (i.e., presumably mildly shocked). These levels are low relative to those in analogous L4-6 chondrites suggesting that H chondrites formed and/or evolved under higher pre-shock temperatures than did mildly shocked L chondrites. Time-temperature conditions during shock-loading of Jilin parent material were mild relative to those in strongly shocked L chondrites, being sufficient at most only to mobilize Cd.

Sakuragi, Y.↗
NASA NTRS1988

The global Cretaceous-Tertiary fire: Biomass or fossil carbon

The global soot layer at the K-T boundary indicates a major fire triggered by meteorite impact. However, it is not clear whether the principal fuel was biomass or fossil carbon. Forests are favored by delta value of C-13, which is close to the average for trees, but the total amount of elemental C is approximately 10 percent of the present living carbon, and thus requires very efficient conversion to soot. The PAH was analyzed at Woodside Creek, in the hope of finding a diagnostic molecular marker. A promising candidate is 1-methyl-7-isopropyl phenanthrene (retene,), which is probably derived by low temperature degradation of abietic acid. Unlike other PAH that form by pyrosynthesis at higher temperatures, retene has retained the characteristic side chains of its parent molecule. A total of 11 PAH compounds were identified in the boundary clay. Retene is present in substantial abundance. The identification was confirmed by analysis of a retene standard. Retene is characteristic of the combustion of resinous higher plants. Its formation depends on both temperature and oxygen access, and is apparently highest in oxygen-poor fires. Such fires would also produce soot more efficiently which may explain the high soot abundance. The relatively high level of coronene is not typical of a wood combustion source, however, though it can be produced during high temperature pyrolysis of methane, and presumably other H, C-containing materials. This would require large, hot, low O2 zones, which may occur only in very large fires. The presence of retene indicates that biomass was a significant fuel source for the soot at the Cretaceous-Tertiary boundary. The total amount of elemental C produced requires a greater than 3 percent soot yield, which is higher than typically observed for wildfires. However, retene and presumably coronene imply limited access of O2 and hence high soot yield.

Gilmour, Iain↗
NASA NTRS1989

The far-infrared luminosity of molecular clouds in the Galaxy

A detailed analysis is presented of the IR emission and CO properties of a large sample of giant molecular clouds (GMCs) with and without H II regions. It is found that high-mass star-forming clouds have significantly higher peak dust temperatures, but averaged over the entire cloud volume, their IR color temperatures are not very different from those of the general GMC population and the mean disk temperature. The results indicate that the bulk of the IR emission in GMCs is excited by embedded stars within the clouds rather than the exterior interstellar radiation field, that only a small fraction of the IR luminosity originates from stars which ionize the H II region. An overall higher level of star-formation activity for the H II region GMCs than the general population is indicated.

Scoville, N. Z.↗
NASA NTRS1991

A fast upwind solver for the Euler equations on three-dimensional unstructured meshes

An upwind scheme is presented for solving the three-dimensional Euler equations on unstructured tetrahedral meshes. Spatial discretization is accomplished by a cell-centered finite-volume formulation using flux-difference splitting. Higher-order differences are formed by a novel cell reconstruction process which results in computational times per cell comparable to those of structured codes. The approach yields highly resolved solutions in regions of smooth flow while avoiding oscillations across shocks without explicit limiting. Solutions are advanced in time by a 3-stage Runge-Kutta time-stepping scheme with convergence accelerated to steady state by local time stepping and implicit residual smoothing. Solutions are presented for a range of configurations in the transonic speed regime to demonstrate code accuracy, speed, and robustness. The results include an assessment of grid sensitivity and convergence acceleration by mesh sequencing.

Frink, Neal T.↗
NASA NTRS1992

The 77 day periodicity in the flare rate of cycle 22

The ocurrence times of major flares of solar cycle 22 are analyzed to detect periodicities. It is found that a periodicity of 77 d was in operation in the 15-m interval from 1988 November to 1990 February for six cycles. During the rest of 1990 no periodicity was discernible; however, it seems that the 77-d periodicity resumed in 1991. This 77-d period is interpreted as the third subharmonic of the fundamental period of about 25.5 d. In this interpretation, the 154-d periodicity is the sixth subharmonic. It is also found that when the 77-d periodicity or the 154-d periodicity is in operation the occurrence rate of major flares is much higher than is expected form the relative sunspot number.

Bai, T.↗
NASA NTRS1991

Characteristics of smoke emissions from biomass fires of the Amazon region - BASE-A experiment

The Biomass Burning Airborne and Spaceborne Experiment-Amazonia was designed for study of both aerosol and gaseous emissions from fires using an airborne sampling platform. The emission factors for combustion products from four fires suggest that the proportion of carbon released in the form of CO2 is higher than for fires of logging which has been burned in the western U.S. Combustion efficiency was of the order of 97 percent for the Amazonian test fire and 86-94 percent for deforestation fires. The inorganic content of particles from tropical fires are noted to be different from those of fires in the U.S.

Ward, Darold E.↗
NASA NTRS1998

Undoped Polyaniline/Surfactant Complex for the Corrosion Prevention

Due to the strict regulations on the usage of heavy metals as the additives in the coating industries, the search for effective organic corrosion inhibitors in replace of those metal additives has become essential. Electrically conducting polymers have been shown to be effective for corrosion prevention but the poor solubility of these intractable polymers has been a problem. We have explored a polyaniline/4-dodecylphenol complex (PANi/DDPh) to improve the dissolution and it has been shown to be an effective organic corrosion inhibitor. With the surfactant, DDPh, PANi could be diluted into the coatings and the properties of the coatings were affected. Emeraldine base (EB) form of PANi was also found to be oxidized by the hardener. The oxidized form of polyaniline provides improved corrosion protection of metals than that of emeraldine base since the value of the standard electrode potential for the oxidized form of PANi is higher than that of EB. Additionally, the surfactant improves the wet adhesion property between the coating and the metal surface.

Liu, Lo-Min↗
NASA NTRS1998

Application of Parametrized Post-Newtonian Methods to the Gravitational IS of Satellite Energy Exchange Data

Project Satellite Energy Exchange (SEE) is a free-flying, high altitude satellite that utilizes space to construct a passive, low-temperature, nano-g environment in order to accurately measure the poorly known gravitational constant G plus other gravitational parameters that are difficult to measure in an earth-based laboratory. Eventually data received from SEE must be analyzed using a model of the gravitational interaction including parameters that describe deviations from general relativity and experiment. One model that can be used to fit tile data is the Parametrized post- Newtonian (PPN) approximation of general relativity (GR) which introduces ten parameters which have specified values in (GR). It is the lowest-order, consistent approximation that contains non linear terms. General relativity predicts that the Robertson parameters, gamma (light deflection), and beta (advance of the perihelion), are both 1 in GR. Another eight parameters, alpha(sub k), k=1,2,3 and zeta(sub k), k=1,2,3,4 and Xi are all zero in GR. Non zero values for alpha(sub k) parameters predict preferred frame effects; for zeta(sub k) violations of globally conserved quantities such as mass, momentum and angular momentum; and for Xi a contribution from the Whitehead theory of gravitation, once thought to be equivalent to GR. In addition, there is the possibility that there may be a preferred frame for the universe. If such a frame exists, then all observers must measure the velocity omega of their motion with respect to this universal rest frame. Such a frame is somewhat reminiscent of the concept of the ether which was supposedly the frame in which the velocity of light took the value c predicted by special relativity. The SEE mission can also look for deviations from the r(exp -2) law of Newtonian gravity, adding parameters alpha and lamda for non Newtonian behavior that describe the magnitude and range of the r(exp -2) deviations respectively. The foundations of the GR supposedly agree with Newtonian gravity to first order so that the parameters alpha and lamda are zero in GR. More important, however, GR subsequently depends on this Newtonian approximation to build up the non linear higher-order terms which forms the basis of the PPN frame work.

Smalley, Larry L.↗
NASA NTRS1998

Statistical Aspects of Intense Hurricanes in the Atlantic Basin during the Past 49 Hurricane Seasons (1950-1998)

Statistical aspects of intense hurricanes (those of category 3 or higher) in the Atlantic basin for the interval of 1950-1998 are investigated with respect to the ENSC, cycle and the postulated 'more versus less' activity modes for intense hurricane activity. This is accomplished in order to evaluate the statistical basis for these specific groupings and to presage a forecast for the number of expected intense hurricanes during the forthcoming 1999 hurricane season. Statistically speaking, because the 1998-1999 La Nina (onset presumed to be September 1998) should persist longer than about a year - the average duration for La Nina events based on the 10 previously occurring La Nina, each having a duration in the range of 7-22 months - it seems likely that the 1999 season will be classified as a 'non-El Nino-related' (NENR) season. If true, then, greater than or equal to 2 intense hurricanes are to be expected. Based on Poisson statistics, the probability of greater than or equal to 2 events is about 77% when the season is classified as NENR, and it is about 87% when the season is classified as NENR and the 'more active' phase is in fashion; likewise, the probability of greater than or equal to 4 events is about 31% and 48%, respectively, for the two cases. Therefore, an above average rate (possibly, as many as 4 +/- 1, or higher) of intense hurricanes forming in the Atlantic basin seems a very distinct possibility during the 1999 season.

Wilson, Robert M.↗
NASA NTRS2004

A Fast Upwind Solver for the Euler Equations on Three-Dimensional Unstructured Meshes

An upwind scheme is presented for solving the three-dimensional Euler equations on unstructured tetrahedral meshes. Spatial discretization is accomplished by a cell-centered finite-volume formulation using flux-difference splitting. Higher-order differences are formed by a novel cell reconstruction process which results in computational times per cell comparable to those of structured codes. The approach yields highly resolved solutions in regions of smooth flow while avoiding oscillations across shocks without explicit limiting. Solutions are advanced in time by a 3-stage Runge-Kutta time-stepping scheme with convergence accelerated to steady state by local time stepping and implicit residual smoothing. Solutions are presented for a range of configurations in the transonic speed regime to demonstrate code accuracy, speed, and robustness. The results include an assessment of grid sensitivity and convergence acceleration by mesh sequencing.

Frink, Neal T.↗
NASA NTRS1989

Current collector for AMTEC

An electrode having higher power output is formed of an open mesh current collector such as expanded nickel covering an electrode film applied to a tube of beta-alumina solid electrolyte (BASE). A plurality of cross-members such as spaced, parallel loops of molybdenum metal wire surround the BASE tube. The loops are electrically connected by a bus wire. As the AMTEC cell is heated, the grid of expanded nickel expands more than the BASE tube and the surrounding loop of wire and become diffusion welded to the electrode film and to the wire loops.

Williams, Roger M.↗
NASA NTRS1989

Thin metal electrode for AMTEC

An electrode having higher power output is formed of a thin, porous film (less than 1 micrometer) applied to a beta-alumina solid electrolyte (BASE). The electrode includes an open grid, current collector such as a series of thin, parallel, grid lines applied to the thin film and a plurality of cross-members such as loop of metal wire surrounding the BASE tube. The loops are electrically connected by a bus wire. The overall impedance of the electrode considering both the contributions from the bulk BASE and the porous electrode BASE interface is low, about 0.5 OHM/cm.sup.2 and power densities of over 0.3 watt/cm.sup.2 for extended periods.

Williams, Roger M.↗
NASA NTRS2017

Smectite Formation in the Presence of Sulfuric Acid: Implications for Acidic Smectite Formation on Early Mars

The excess of orbital detection of smectite deposits compared to carbonate deposits on the martian surface presents an enigma because smectite and carbonate formations are both favored alteration products of basalt under neutral to alkaline conditions. We propose that Mars experienced acidic events caused by sulfuric acid (H2SO4) that permitted phyllosilicate, but inhibited carbonate, formation. To experimentally verify this hypothesis, we report the first synthesis of smectite from Mars-analogue glass-rich basalt simulant (66 wt% glass, 32 wt% olivine, 2 wt% chromite) in the presence of H2SO4 under hydrothermal conditions (approximately 200 degC). Smectites were analyzed by X-ray diffraction, Mossbauer spectroscopy, visible and near-infrared reflectance spectroscopy and electron microprobe to characterize mineralogy and chemical composition. Solution chemistry was determined by Inductively Coupled Plasma Mass Spectrometry. Basalt simulant suspensions in 11-42 mM H2SO4 were acidic with pH less than or equal to 2 at the beginning of incubation and varied from acidic (pH 1.8) to mildly alkaline (pH 8.4) at the end of incubation. Alteration of glass phase during reaction of the basalt simulant with H2SO4 led to formation of the dioctahedral smectite at final pH approximately 3 and trioctahedral smectite saponite at final pH approximately 4 and higher. Anhydrite and hematite formed in the final pH range from 1.8 to 8.4 while natroalunite was detected at pH 1.8. Hematite was precipitated as a result of oxidative dissolution of olivine present in Adirondack basalt simulant. Formation of secondary phases, including smectite, resulted in release of variable amounts of Si, Mg, Na and Ca while solubilization of Al and Fe was low. Comparison of mineralogical and solution chemistry data indicated that the type of smectite (i.e., dioctahedral vs trioctahedral) was likely controlled by Mg leaching from altering basalt and substantial Mg loss created favorable conditions for formation of dioctahedral smectite. We present a model for global-scale smectite formation on Mars via acid-sulfate conditions created by the volcanic outgassing of SO2 in the Noachian and early Hesperian.

Smectite↗
NASA NTRS1999

Constraint-free Theories of Gravitation

Lovelock actions (more precisely, extended Gauss-Bonnet forms) when varied as Cartan forms on subspaces of higher dimensional flat Riemannian manifolds, generate well set, causal exterior differential systems.

gravitation↗
NASA NTRS1994

Development of high Tc (greater than 100 K) Bi, Tl and Y-based materials as superconducting circuit elements

Experimental work on this project over the last four years has resulted in establishing processing and characterization techniques for producing both the Bi-based and Tl-based superconductors in their high temperature (2223) forms. In the bulk, dry pressed form, maximum critical temperatures (Tc) of 108.2 K and 117.8 K, respectively, were measured. Results have further shown that the Bi and Tl-based superconducting materials in bulk form are noticeably different from the Y-based 123 material in that superconductivity is considerably harder to achieve, maintain, and reproduce. This is due primarily to the difficulty in obtaining the higher Tc phase in pure form since it commonly co-exists with other undesirable, lower Tc phases. In particular, it has been found that long processing times for calcining and firing (20 - 200 hrs.) and close control of temperatures which are very near the melting point are required in order to obtain higher proportions of the desirable, high Tc (2223) phase. Thus far, the BSCCO bulk materials has been prepared in uniaxially pressed, hot pressed, and tapecast form. The uniaxially pressed material has been synthesized by the mixed oxide, coprecipitation, and melt quenching processes. The tapecast and hot pressed materials have been prepared via the mixed oxide process. In addition, thick films of BSCCO (2223 phase) have been prepared by screen printing on to yttria and magnesia stabilized zirconia with only moderate success; i.e., superconductivity was achieved in these thick films, but the highest Tc obtained in these films was 89.0 K. The Tc's of the bulk hot pressed, tapecast, and screen printed thick film materials were found to be 108.2, 102.4, and 89.0 K, respectively.

Haertling, Gene↗
NASA NTRS1993

Development of high Tc (greater than 100 K) Bi, Tl and Y-based materials as superconducting circuit elements

Results on this project over the past three years have shown that the Bi and Tl-based superconducting materials in bulk form are noticeably different from the Y-based 123 material in that superconductivity is considerably harder to achieve, maintain and reproduce. This is due primarily to the difficulty in obtaining the higher Tc phase in pure form since it commonly co-exists with other undesirable, lower Tc phases. In particular, it has been found that long processing times for calcining and firing (20 - 200 hrs.) and close control of temperatures which are very near the melting point are required in order to obtain higher proportions of the desirable, high Tc (2223) phase.

Haertling, Gene↗