Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hay”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

On the 6825 A band of methane as observed in Uranus and Neptune

A high-resolution spectrum of the series of lines near 6825 A presumably due to CH4 has been obtained for Uranus. The line spacings are in agreement with the previous observations of Owen (1966), Bergstralh (1975), and Belton and Hayes (1975) but not with the laboratory observations reported by Lutz and Owen (1976). It is proposed that the transitions identified by Lutz and Owen are not correlated one-to-one with those features observed in the planets. Wavelength differences of up to 0.8 A are found between the laboratory and planetary features, where the resolving power allows one to specify the line positions to better than + or - 0.07 A. The spectrum obtained for Neptune is in essential agreement with that for Uranus.

Gelfand, J.↗

On the 3d2 4s2, 3d3 4s1, and 3d4 states of Ti

The energies of the 3F (3d2 4s2), 5F (3d3 4s1) and 5D (3d4) states of Ti are investigated on the basis of MCSCF and CI calculations. Following SCF calculations using a basis set including the primitive set of Wachters (1970) and the diffuse d function of Hay (1977), four full-electron CI calculations involving the 3d and 4s electrons were performed to obtain the natural orbitals, and the full CI calculations were repeated. MCSCF calculations then performed using the most important configurations of the natural orbital basis are found to be in agreement with those of Dunning (1980), but to differ from CI results. CI(SD) calculations including single and double excitations from the MCSCF reference are found to be in agreement with the full CI but differ from experimental energy separations. Further calculations reveal that Dunning's MCSCF description is an oversimplication of the problem, and that the 5F-5D separation at the CI(SD) level is in good agreement with experiment for all basis sets but the 3F state is too low relative to the 5F and 5D states.

Bauschlicher, C. W., Jr.↗

The rotation of Uranus

A historical review of the use of three independent techniques for measuring the rotational rate is presented. The approaches examined are: (1) using theoretical interior models together with observations of the oblateness and the gravitational moment; (2) studying periodic fluctuations in the brightness; and (3) spectrographically measuring the Doppler shifts (line tilts). Measurements of line tilts obtained using the Kitt Peak National Observation 4 meter telescope with a Cassegrain echelle to high obtain high spectral dispersion and large image are discussed and compared with results obtained by Muench and Hipplelein (1980) and by Hayes and Belton (1977). The possibility of using speckel imaging techniques to detect the motion of features across the disc in the 6091 methane band, and with more suitable image intensifiers, in the 7261 band is considered.

Goody, R. M.↗

A temporal/spectral analysis of small grain crops and confusion crops

Spectral data from the LANDSAT-2 satellite were used to study the growth cycles of fields of wheat, barley, alfalfa, corn, sunflowers, soybeans, rye, flax, oats, millet, grass, and hay. Signatures of pastures, trees, and idle fallow were also studied. The growth cycles were portrayed in the form of temporal plots of the greeness-brightness transformation vector applied to average channel pixel values within the fields, all of which were in three counties in North Dakota. The plots of each crop reveal characteristics which can be used in crop classification procedures.

Johnson, W. R.↗

Investigation of Aerodynamic and Icing Characteristics of Recessed Fuel-Vent Configurations

An investigation has been conducted in the NACA Cleveland icing research tunnel to determine the aerodynamic and icing characteristics of several recessed fuel-vent configurations. The vents were investigated aerodynamically to obtain vent-tube pressures and pressure distributions on the ramp surface as functions of tunnel-air velocity and angle of attack. Icing investigations were made to determine the vent-tube pressure losses for several icing conditions at tunnel-air velocities ranging from 220 to 440 feet per second. In general, under nonicing conditions, the configurations with diverging ramp walls maintained, vent-tube pressures greater than the required marginal value of 2 inches of water positive pressure differential between the fuel cell and the compartment containing the fuel cell for a range of angles of attack from 0 to 14deg at a tunnel-air velocity of approximately 240 feet per second. A configuration haying divergIng ramp sldewalls, a 7deg ramp angle; and vent tubes manifold,ed to a common plenum chamber opening through a slot In the ramp floor gave the greatest vent-tube pressures for all the configurations investigated. The use of the plenum chamber resulted in uniform pressures in all vent tubes. In a cloud-icing condition, roughness caused by ice formations on the airfoil surface ahead of the vent ramp, rather than icing of the vent configuration, caused a rapid loss in vent-tube pressures during the first few minutes of an icing period. Only the configuration having diverging ramp sidewalls, a 7 ramp angle, and a common plenum chamber maintained the required vent-tube pressures throughout a 60-minute icing period, although the ice formations on this configuration were more severe than those observed for the other configurations. No complete closure of vent-tube openings occurred for the configurations investigated. A simulated freezing-rain condition caused a greater and more rapid vent-tube pressure loss than was observed for a cloud-icing condition.

Ruggeri, Robert S.↗

In situ spectral reflectance studies of tidal wetland grasses

Field measurements of wetland spectral canopy reflectance in the Landsat-MSS wavebands were correlated with biotic factors. The highest single band correlations were observed between visible (MSS Band 4: 0.5 to 0.6 micron and Band 5: 0.6 to 0.7 micron) canopy reflectance and the percentage, by weight, of live (green) vegetation in the canopies of Spartina alterniflora (salt marsh cordgrass), Spartina patens (salt meadow grass), and Distichlis spicata (spike grass). Infrared canopy reflectance displayed significant but weaker dependence on canopy parameters such as live and total biomass and canopy height. The Band 7 (0.8 to 1.1 microns)/Band 5 (0.6 to 0.7 micron) reflectance ratio was found to be highly correlated with green biomass for S. alterniflora. Highest spectral separability between the 'low marsh' S. alterniflora and the 'high marsh' Salt Hay (S. patens and D. spicata) communities in Delaware occurs during December.

Bartlett, D. S.↗

Middle atmospheric electrodynamics

A review is presented of the advances made during the last few years with respect to the study of the electrodynamics in the earth's middle atmosphere. In a report of the experimental work conducted, attention is given to large middle atmospheric electric fields, the downward coupling of high altitude processes into the middle atmosphere, and upward coupling of tropospheric processes into the middle atmosphere. It is pointed out that new developments in tethered balloons and superpressure balloons should greatly increase the measurement duration of earth-ionospheric potential measurements and of stratospheric electric field measurements in the next few years. Theoretical work considered provides an excellent starting point for study of upward coupling of transient and dc electric fields. Hays and Roble (1979) were the first to construct a model which included orographic features as well as the classical thunderstorm generator.

Kelley, M. C.↗

The dissociation energy of Cu2 - Do we want to perform multi-reference singles and doubles CIs on many-electron systems?

Reference is made to a study by Hay and Dunning (1976), who showed that, for most problems, it is not necessary to perform full FOCI (first order configuration interaction); instead, only that subset of configuration state functions (CSFs) that differ by only one or two spin orbitals from any of a list of reference configurations need be used. This is referred to as POLCI. Calculations of the D(e) of Cu2 using both SDCI (singles and doubles configuration interaction) and POLCI models are presented. It is found that the size-consistency problems associated with SDCI cause an error in D(e), whereas the POLCI results are in excellent agreement with experiment. It is proposed that the orbitals be classified as inactive and active and that the inactive-inactive correlation be eliminated to reduce the size-consistency error. In addition, it is recommended that SDCI treatments be applied with caution to systems having a large number of electrons.

Bauschlicher, C. W., Jr.↗

Supplemental basis functions for the second transition row elements

It is noted that for molecular calculations, the basis sets presented by Huzinaga (1977) need to be augmented by (1) 5p functions to describe the 5s - 5p near degeneracy; (2) a diffuse 4d function to provide for a balanced description of the 5s2 4dn, 5s1 4d(n+1), and 4d(n+2) states of the atom; and (3) a set of 4f functions to correlate the 4d functions. Here, the diffuse 4d function is similar in function to the diffuse 3d function for the first transition row elements recommended by Hay (1977). A table is included giving the optimized values for the diffuse 4d, the 5p, and 4f (STO exponent) functions. The diffuse 4d function and the 5p functions are optimized at the SCF level on the basis of the 5s1 4d(n+1) state (except for Pd, which is optimized for the 4d10 state) and the 5s1 5p1 4dn state, respectively. The table also gives the energies and the atomic symmetries for each of the SCF calculations.

Walch, S. P.↗

Atmospheric electric field and current configurations in the vicinity of mountains

A number of investigations have been conducted regarding the electrical distortion produced by the earth's orography. Hays and Roble (1979) utilized their global model of atmospheric electricity to study the effect of large-scale orographic features on the currents and fields of the global circuit. The present paper is concerned with an extension of the previous work, taking into account an application of model calculations to orographic features with different configurations and an examination of the electric mapping of these features to ionospheric heights. A two-dimensional quasi-static numerical model of atmospheric electricity is employed. The model contains a detailed electrical conductivity profile. The model region extends from the surface to 100 km and includes the equalization layer located above approximately 70 km. The obtained results show that the electric field and current configurations above mountains depend upon the curvature of the mountain slopes, on the width of the mountain, and on the columnar resistance above the mountain (or mountain height).

Tzur, I.↗

Theoretical studies of diatomic and triatomic systems containing the group IB atoms Cu, Ag, and Au

Selected portions of the ground state potential energy surfaces of the Cu3, Ag3, AgCu2, and AuCu2 trimers are studied at the single-reference singles plus doubles configuration interaction and couple pair functional levels correlating 33 electrons. The calculations use the effective core potentials of Hay and Wadt (1985) to replace the deep core levels. The Cu3 and Ag3 molecules are found to have 2B2 obtuse-angled ground states, with low-lying 2A1 acute-angled excited states. The AgCu2 and AuCu2 molecules have 2A1 acute-angled ground states. The Cu3 molecule has a smaller 3d population than Ag3, and Cu3 has a smaller s electron density in the open-shell orbital than does Ag3, in agreement with recent ESR experiments.

Walch, Stephen P.↗

Thermospheric production of O(1S) by dissociative recombination of vibrationally excited O2(+)

High spectral resolution line profiles at 5577 A of the nighttime, F-region O(1S) emission measured by the Fabry-Perot interferometer on board the Dynamics Explorer satellite are analyzed using a continuous O(1S) relaxation model. The model is an improvement over the previous model of Killeen and Hays (1981) in that energy loss via elastic collision is considered in addition to the single collision, excitation exchange thermalization process. The results show that the active channel for O(1S) production is capture into the 1Sigma(+)u repulsive state of O2 and that the main contributor to its production is the dissociative recombination of O2(+) ions in vibrational levels v = 1 and 2 in agreement with the quantal calculations of Guberman (1983).

Yee, Jeng-Hwa↗

Theoretical spectroscopic parameters for the low-lying states of the second-row transition metal hydrides

A systematic analysis of the low-lying states of all of the second-row transition metal (TM) hydrides except CdH is reported. The calculations included the dominant relativistic contributions through the use of the relativistic effective core potentials of Hay and Wadt (1985). Electron correlation was incorporated, using single-plus-double configuration interaction, the coupled pair functional (CPF) formalism of Ahlrichs et al. (1985), and the Chong and Langhoff (1986) modified version of the CPF method. The spectroscopic parameters D(e), r(e), and mu(e) determined for the low-lying states are compared with the available experimental data and previous theoretical results. In contrast to the first-row TM hydrides studied earlier (Chong et al., 1986), the spectroscopic constants for the second-row TM hydrides were found to be much less sensitive to the level of correlation treatment.

Langhoff, Stephen R.↗

Computed potential surfaces for six low-lying states of Ni3

Selected portions of the potential surfaces for six low lying states of Ni3 are the subject of the present SCF/CCI calculations using the effective core potentials developed by Hay and Wadt (1985); the four states are studied for near-equilateral triangle geometries are within 0.04 eV of each other. Two states are studied for linear geometries, of which the first is 0.16 eV higher than the corresponding near-equilateral triangle state and the second is estimated to be nearly degenerate with the near-equilateral triangle structures.

Walch, Stephen P.↗

Positive ions of the first- and second-row transition metal hydrides

Theoretical dissociation energies for the first- and second-row transition metal hydride positive ions are critically compared against recent experimental values obtained from ion beam reactive scattering methods. Theoretical spectroscopic parameters and dipole moments are presented for the ground and several low-lying excited states. The calculations employ large Gaussian basis sets and account for electron correlation using the single-reference single- and double-excitation configuration interaction and coupled-pair-functional methods. The Darwin and mass-velocity contributions to the relativistic energy are included in the all-electron calculations on the first-row systems using first-order perturbation theory, and in the second-row systems using the Hay and Wadt relativistic effective core potentials. The theoretical D(0) values for the second-row transition metal hydride positive ions should provide a critical measure of the experimental values, which are not as refined as many of those in the first transition row.

Pettersson, Lars G. M.↗

Transform fault earthquakes in the North Atlantic: Source mechanisms and depth of faulting

The centroid depths and source mechanisms of 12 large earthquakes on transform faults of the northern Mid-Atlantic Ridge were determined from an inversion of long-period body waveforms. The earthquakes occurred on the Gibbs, Oceanographer, Hayes, Kane, 15 deg 20 min, and Vema transforms. The depth extent of faulting during each earthquake was estimated from the centroid depth and the fault width. The source mechanisms for all events in this study display the strike slip motion expected for transform fault earthquakes; slip vector azimuths agree to 2 to 3 deg of the local strike of the zone of active faulting. The only anomalies in mechanism were for two earthquakes near the western end of the Vema transform which occurred on significantly nonvertical fault planes. Secondary faulting, occurring either precursory to or near the end of the main episode of strike-slip rupture, was observed for 5 of the 12 earthquakes. For three events the secondary faulting was characterized by reverse motion on fault planes striking oblique to the trend of the transform. In all three cases, the site of secondary reverse faulting is near a compression jog in the current trace of the active transform fault zone. No evidence was found to support the conclusions of Engeln, Wiens, and Stein that oceanic transform faults in general are either hotter than expected from current thermal models or weaker than normal oceanic lithosphere.

Bergman, Eric A.↗

Transform fault earthquakes in the North Atlantic - Source mechanisms and depth of faulting

The centroid depths and source mechanisms of 12 large earthquakes on transform faults of the northern Mid-Atlantic Ridge were determined from an inversion of long-period body waveforms. The earthquakes occurred on the Gibbs, Oceanographer, Hayes, Kane, 15 deg 20 min, and Vema transforms. The depth extent of faulting during each earthquake was estimated from the centroid depth and the fault width. The source mechanisms for all events in this study display the strike slip motion expected for transform fault earthquakes; slip vector azimuths agree to 2 to 3 deg of the local strike of the zone of active faulting. The only anomalies in mechanism were for two earthquakes near the western end of the Vema transform which occurred on significantly nonvertical fault planes. Secondary faulting, occurring either precursory to or near the end of the main episode of strike-slip rupture, was observed for 5 of the 12 earthquakes. For three events the secondary faulting was characterized by reverse motion on fault planes striking oblique to the trend of the transform. In all three cases, the site of secondary reverse faulting is near a compression jog in the current trace of the active transform fault zone. No evidence was found to support the conclusions of Engeln, Wiens, and Stein that oceanic transform faults in general are either hotter than expected from current thermal models or weaker than normal oceanic lithosphere.

Bergman, Eric A.↗

Solar activity influences on atmospheric electricity and on some structures in the middle atmosphere

Only processes in the troposphere and the lower stratosphere are reviewed. General aspects of global atmospheric electricity are summarized in Chapter 3 of NCR (1986); Volland (1984) has outlined the overall problems of atmospheric electrodynamics; and Roble and Hays (1982) published a summary of solar effects on the global circuit. The solar variability and its atmospheric effects (overview by Donelly et al, 1987) and the solar-planetary relationships (survey by James et al. 1983) are so extremely complex that only particular results and selected papers of direct relevance or historical importance are compiled herein.

Reiter, Reinhold↗