SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This paper covers the various techniques that are currently being used and developed to fabricate grazing incidence X-ray optics for the energy range from about 0.2 to 20 keV. Techniques covered will include diamond turning, thin foils, epoxy/carbon-fiber replication, electroforming replication, and float glass/Kirkpatrick-Baez techniques.
A class of high-resolution, efficient, and wide-field grazing incidence optics is discussed. Optical designs for searching efficiently for distant X-ray clusters are developed. It is shown that a rather general procedure exists for the design of an optical mission if well-defined scientific goals can be provided. Clusters of galaxies with an angular diameter of about 5 arcsec over a field of about 1 deg are resolved so that a comprehensive deep search is possible with a payload of 1/10 the linear dimensions of AXAF. By dropping the requirement for perfect on-axis imagery, searching within a suitably general class of telescope design, and optimizing a quantity directly related to the scientific requirement, it is shown that satisfactory designs do exist. The resulting telescope is shown to be no more difficult to fabricate than existing mirrors, and it can be nested.
Differential deposition corrects the low- and mid- spatial-frequency deviations in the axial figure of Wolter-type grazing incidence X-ray optics. Figure deviations is one of the major contributors to the achievable angular resolution. Minimizing figure errors can significantly improve the imaging quality of X-ray optics. Material of varying thickness is selectively deposited, using DC magnetron sputtering, along the length of optic to minimize figure deviations. Custom vacuum chambers are built that can incorporate full-shell and segmented Xray optics. Metrology data of preliminary corrections on a single meridian of full-shell x-ray optics show an improvement of mid-spatial frequencies from 6.7 to 1.8 arc secs HPD. Efforts are in progress to correct a full-shell and segmented optics and to verify angular-resolution improvement with X-ray testing.
Contamination assessment for space optical systems requires an understanding of the sensitivity of component performance, e.g. mirror reflectance, to materials deposited on the mirror surface. In a previous study, the sensitivity of typical normal incidence mirror coatings to surface deposits of generic hydrocarbons was reported. Recent activity in the development of grazing incidence telescopes for extreme ultraviolet space astronomy has stimulated the need for a similar assessment in the spectral region extending from approximately 100 A to 1000 A. The model used for analysis treats the contamination layer as a continuous thin film deposited on the mirror surface. The mirror surfaces selected for this study are opaque vacuum deposited gold and the uncoated and polished Zerodur. Scatter caused by film irregularities or particulates are not included in this assessment. Parametric evaluations at 100, 500, and 1000 A determine the sensitivity of mirror reflectance to a range of optical constants selected for the generic contaminants. This sensitivity analysis combined with the limited amount of optical data in the EUV for hydrocarbons, is used to select representative optical constants for the three wavelength regions. Reflectance versus contamination layer thickness curves are then calculated and used to determine critical thickness limits based on allowable reflectance change. Initial observations indicate that thickness limits will be highly dependent on the real part of the complex index of refraction of the contaminant film being less than 1.0. Preliminary laboratory measurements of samples contaminated with some commonly encountered hydrocarbons confirm trends indicated in the analytical studies.
An account is given of the methods and results of X-ray testing for the grazing-incidence optics of the F/5.73 Wolter Type I telescope, whose mirror had flown on a NASA sounding rocket in March, 1991. Attention is given to the tests of the inplane (full aperture) and offplane (apodized aperture) imaging response at 0.25-1.50 keV energies; correlations with surface figures are discussed.
An optical system for x-rays combines at least two spherical or near spherical mirrors for each dimension in grazing incidence orientation to provide the functions of a lens in the x-ray region. To focus x-ray radiation in both the X and the Y dimensions, one of the mirrors focusses the X dimension, a second mirror focusses the Y direction, a third mirror corrects the X dimension by removing comatic aberration and a fourth mirror corrects the Y dimension. Spherical aberration may also be removed for an even better focus. The order of the mirrors is unimportant.
Analyses of the imaging properties of several designs for varied-line space gratings in converging beams of light in grazing-incidence spectrometers are presented. An explicit model is defined for the case of a plane-reflection grating intercepting light that converges and is reflected to a stigmatic point associated with the zero-order image of the grating. Smooth spatial variation of the grating constant then permits aberration correction. The aberrations are expressed as polynomials in the grating lens coordinates using power series expansions. Application of the model is illustrated in terms of aberrations experienced with the short wavelength spectrometer on the EUVE satellite. Attention is given to straight and parallel in-plane grooves, curved groove in-plane designs and off-plane grooves. Aberrations due to dispersions and misalignment are also considered.
A differential deposition technique is being developed to correct the low- and mid-spatial-frequency deviations in the axial figure profile of Wolter type grazing incidence X-ray optics. These deviations arise due to various factors in the fabrication process and they degrade the performance of the optics by limiting the achievable angular resolution. In the differential deposition technique, material of varying thickness is selectively deposited along the length of the optic to minimize these deviations, thereby improving the overall figure. High resolution focusing optics being developed at MSFC for small animal radionuclide imaging are being coated to test the differential deposition technique. The required spatial resolution for these optics is 100 m. This base resolution is achievable with the regular electroform-nickel-replication fabrication technique used at MSFC. However, by improving the figure quality of the optics through differential deposition, we aim at significantly improving the resolution beyond this value.
The paper describes the fabrication processes, by grinding and polishing, used in making the mirrors for a f/2.8 Wolter type-I grazing incidence telescope at Boulder (Colorado), together with testing procedure used to determine the quality of the images. All grinding and polishing is done on specially designed machine that consists of a horizontal spindle to hold and rotate the mirror and a stroke arm machine to push the various tools back and forth along the mirrors length. The progress is checked by means of the ronchi test during all grinding and polishing stages. Current measurements of the telescope's image quality give a FWHM measurement of 44 arcsec, with the goal set at 5-10 arcsec quality.
The requirements for future hard x-ray (up to 50 keV) telescopes are lightweight, high angular resolution optics with large collecting areas. Grazing incidence replicated optics are an excellent candidate for this, type of mission, providing better angular resolution, comparable area/unit mass, and simpler fabrication than multilayer-coated foils. Most importantly, the technology to fabricate the required optics currently exists. A comparison of several hard x-ray telescope designs will be presented.
Diffraction effects of X-ray optical systems are often (justifiably) ignored due to the small wavelength of the X-ray radiation. However, the extremely large obscuration ratio inherent to grazing incidence optical systems produces a profound degradation of the diffraction image over that produced by a moderately obscured aperture of the same diameter. The contradictory requirements of large collecting area and relatively short length of optical elements has tended to result in proposed designs containing many concentric shells with increasingly higher obscuration ratios. In this paper it is shown that diffraction effects in such systems can significantly affect the achievable optical performance at the low energy (long wavelength) end of the intended operating spectral range. Parametric diffraction-limited performance predictions for both imaging and spectrographic applications will be presented and compared to AXAF performance goals and/or BBXRT fabrication techniques.
Abstract The primary cell wall is highly hydrated in its native state, yet many structural studies have been conducted on dried samples. Here, we use grazing-incidence wide-angle X-ray scattering (GIWAXS) with a humidity chamber, which enhances scattering and the signal-to-noise ratio while keeping outer onion epidermal peels hydrated, to examine cell wall properties. GIWAXS of hydrated and dried onion reveals that the cellulose ( $$110/1\overline{1}0$$ 110 / 1 1 ¯ 0 ) lattice spacing decreases slightly upon drying, while the (200) lattice parameters are unchanged. Additionally, the ( $$110/1\overline{1}0$$ 110 / 1 1 ¯ 0 ) diffraction intensity increases relative to (200). Density functional theory models of hydrated and dry cellulose microfibrils corroborate changes in crystalline properties upon drying. GIWAXS also reveals a peak that we attribute to pectin chain aggregation. We speculate that dehydration perturbs the hydrogen bonding network within cellulose crystals and collapses the pectin network without affecting the lateral distribution of pectin chain aggregates.
The effect of periodic surface roughness on the radar cross section (RCS) was studied. The surface roughness was formed by a small sinusoidal variation in a planar surface. RCS measurements were obtained for two different sinusoidal variations near grazing incidence for both principle polarizations. Significant grating lobes were observed in the measurements which directly correspond to the roughness characteristics. A physical optics solution was generated and compared to the measurements with reasonable agreement.
An exact expression relating the coordinates of a point on the incident ray, a point of reflection from an arbitrary surface, and a point on the reflected ray is derived. The exact relation is then specialized for the case of grazing incidence, and first order and third order systematic analyses are carried out for a single reflective surface and then for a combination of two surfaces. The third order treatment yields a complete set of primary aberrations for single element and two element systems. The importance of a judicious choice for a coordinate system in showing field curvature to clearly be the predominant aberration for a two element system is discussed. The validity of the theory is verified through comparisons with the exact ray trace results for the case of the telescope.
To understand the relationship between the intermolecular structure of aromatic polyamide (PA) scaffold and the water molecules in the barrier layers of reverse osmosis (RO) membranes, a grazing incidence wide-angle X-ray scattering (GIWAXS) study was carried out on freestanding PA thin films at varying relative humidity (RH) conditions. The scattering results were analyzed by an interference scattering model, containing a phase factor between a PA chain and an adsorbed water molecule. This model yielded good fits to the GIWAXS profiles where the water adsorption was found to vary linearly with RH. Atomistic molecular dynamics (MD) simulations were also performed to complement the experimental study. Furthermore, the simulations revealed that a rapid condensation layer initially formed on the PA film surface, followed by the slow water molecule diffusion inside the PA membrane. Sparse adsorbed water, isolated in subnanopores of the PA film adjacent to the polar atoms, even in very low quantities, modifies the X-ray scattering. Atomistic simulations at the microscopic scale provide partial support for several X-ray scattering findings.
MaGIXS is a slitless soft X-ray (SXR) imaging spectrometer designed to observe solar active regions. - The instrument produces spatially resolved SXR spectra, known as “overlappograms.” (Athiray et al. 2019 & Champey et al., 2022) The first sounding rocket flight of the Marshall Grazing Incidence X-ray Spectrometer occurred on July 30, 2021 from the White Sands Missile Range, New Mexico. - Spectrally pure images of X-ray bright points were obtained through the inversion of overlappograms, e.g. Fig. 3 (Savage et al., 2022). MaGIXS 2 is a simplified version of the original design, less the spectrometer mirror pair. - Eliminating the spectrometer mirror pair improves spatial resolution, increases effective area and the field of view (Table 1). No field stop in this design, data will be an overlappogram with the same spatial and spectral plate scale.
Overview MaGIXS is a slitless soft X-ray (SXR) imaging spectrometer designed to observe solar active regions. - The instrument produces spatially resolved SXR spectra, known as “overlappograms.” (Athiray et al. 2019 & Champey et al., 2022) The first sounding rocket flight of the Marshall Grazing Incidence X-ray Spectrometer occurred on July 30, 2021 from the White Sands Missile Range, New Mexico. - Spectrally pure images of X-ray bright points were obtained through the inversion of overlappograms, e.g. Fig. 3 (Savage et al., 2022). MaGIXS 2 is a simplified version of the original design, less the spectrometer mirror pair. - Eliminating the spectrometer mirror pair improves spatial resolution, increases effective area and the field of view (Table 1). No field stop in this design, data will be an overlappogram with the same spatial and spectral plate scale.
Work to produce mirrors via electroform replication is reported. Work on small (6 cm by 9 cm) cylindrical pieces and on 40 cm long by 12 cm wide Wolter shaped mirrors is summarized. It is shown that electroforming is a viable technique for producing relatively inexpensive grazing incidence X-ray optics, as long as modest resolution (1 min of arc) and size (12 cm diameter by 40 cm long) are specified.