Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “granular flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Radio Frequencies Emitted by Mobile Granular Materials: A Basis for Remote Sensing of Sand and Dust Activity on Mars and Earth

In recent laboratory experiments, measurements were made of microsecond radio-wave (RF) bursts emitted by grains of sand as they energetically circulated in a closed, electrically ungrounded chamber. The bursts appeared to result from nanoscale electrical discharging from grain surfaces. Both the magnitude and wave form of the RF pulses varied with the type of material undergoing motion. The release of RF from electrical discharging is a well-known phenomenon, but it is generally measured on much larger energy scales (e.g., in association with lightning or electrical motors). This phenomenon might be used to detect, on planetary surfaces, the motion and composition of sand moving over dunes, the turbulent motion of fine particles in dust storms, highly-energetic grain and rock collisions in volcanic eruptions, and frictional grinding of granular materials in dry debris flows, landslides, and avalanches. The occurrence of these discharges has been predicted from theoretical considerations Additional information is contained in the original.

Marshall, J.↗
NASA NTRS1975

Surface morphology and chemistry of rusty particle 60002,108

Scanning electron microscope, energy dispersive X-ray, and microprobe analyses of the surface of rusty colored particle 60002,108 from deep core 60002 reveal the particle to be basically metallic Ni-Fe that probably grew in contact with silicate minerals, principally plagioclase and pyroxene, and was later partially oxidized and hydrated. A yellowish wrinkled and 'shatter cone' like granular material that is either iron oxide or oxyhydrate may have formed while the particle was in the lunar environment. Ruby-red mounds of lawrencite formed, and the reaction of lawrencite, metallic Ni-Fe, and water vapor resulted in aprons of iron oxyhydrate that surrounds these mounds and flows out over the preexisting yellowish granular substrate. The observations do not allow one to distinguish unequivocally between the initiation of hydration of the ruby-red lawrencite mounds in the lunar environment followed by reaction in the terrestrial and/or spacecraft environment or only reaction in the terrestrial and/or spacecraft environment. The relationship of the lawrencite-rich mounds to the yellowish granular substrate favors the first possibility.

Carter, J. L.↗
DOE OSTI2024

Macroscopic Traffic Modeling Using Probe Vehicle Data: A Machine Learning Approach

Abstract The macroscopic fundamental diagram (MFD) captures an orderly relationship among traffic flow, density, and speed at the network level. It is a simple yet powerful tool for modeling traffic dynamics in large urban networks with broad application in traffic control and management. However, empirically derived MFDs in urban regions require high-resolution traffic data from the network. Having the network flow and vehicular density estimated at the (granular) census tract level using vehicle probe data, we apply machine learning methods to predict the MFDs across U.S. urban areas and capture the impacts of location-specific input features on the network flow–density relationships at a large scale. The results show that, among the four tested machine learning approaches (Random Forest, XGBoost, Support Vector Machine, and Neural Network), XGBoost delivers the best performance in predicting network traffic flow based on vehicular density and location attributes. Using interaction Shapley Additive explanation (SHAP) values and partial correlation analysis, we examine the factors influencing MFD shapes across different locations. Our empirical findings reveal that across U.S. urban areas, network topology, transportation infrastructure, and land use are primary factors shaping MFD curves, while demand and trip-related factors play a lesser role. Specifically, higher ranking roads, centrality, and development levels correlate positively with network capacity and critical density, whereas negative associations are observed for network connectivity, mixed-use development, and road roughness levels.

Jin, Ling↗
NASA NTRS1992

Evidence for transonic flows in the solar granulation

High-resolution observations of the solar granulation are interpreted in the light of recent numerical simulations of compressible convection. The observations show a negative correlation between the width of suitably chosen, nonmagnetic lines and the continuum intensity. This result is consistent with a model of granular convection where regions of supersonic horizontal flow form intermittently in the vicinity of the downflow lanes. We conjecture that the observed line broadening in the regions of low intensity is caused by enhanced turbulent fluctuations generated by the passage of shock fronts bounding the regions of supersonic motion.

Nesis, A.↗
DOE OSTI2025

Go with the Flow: Additives to Improve the Flowability of Crumbled Corn Stover

For this work, magnesium stearate (MgSt), a common flow additive and anticaking agent, was applied to corn stover feedstocks with three particle sizes. The material handling properties of dry, 15%, and 30% moisture content corn stover were measured with a Freeman FT-4 powder rheometer and mass flow hopper calculations. While hydrated biomass typically exhibits poor flowability, introducing MgSt led to a significant increase in flowability for dry and 15% moisture content feedstocks, with less impact at 30% moisture content. Inverse gas chromatography showed a decrease, up to 40%, in the surface energy of MgSt-coated corn stover. While MgSt may not be ideal for biofuel or chemical production, this study highlights the potential of flow additives to reduce adhesive and cohesive forces, improving biomass feedstock handling.

09 BIOMASS FUELS↗
DOE OSTI2025

Development of High-Granularity Dual-Readout Calorimetry with psec Timing

Dual-readout and particle flow algorithm (PFA) are technologies proposed for precise jet energy measurement in future colliders. While PFA requires highly granular calorimeters, dual-readout has mainly been used with fiber-based calorimeters that do not have highly segmented capabilities. It is still non-trivial to combine these two technologies in one calorimeter system because of the use of fibers in most of the dualreadout calorimeters, which is not compatible with the high granularity requirement of PFA technologies. The aim of this study is to develop a novel calorimetry that combines dual-readout and PFA by adopting a highly segmented tile-based configuration. This paper compares the improvement of energy resolution using dual-readout approach across several configurations of highly granular hadron calorimeters through simulation. Results indicate that setups with fine sampling and close placement of scintillators and Cherenkov detectors improve dual-readout performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Discrete-Element and Material-Point Method (DEM and MPM) Based Solvers for Sustainable Technologies

We present the use of discrete element method (DEM) and material point method (MPM) in three relevant green technology applications that include biomass feedstock handling, lithium-ion battery manufacturing, and high-pressure reverse osmosis. Our open-source DEM and MPM solvers are developed using performance portable grid and particle management library, AMReX, thus enabling superior performance on NVIDIA and AMD GPUs with > 100 million particles. Our DEM solver resolves the motion of individual particles in a granular system and includes a bonded sphere method for modeling non-spherical particles along with Hertzian and liquid bridge-based contact models. We simulate highly variable biomass feedstock flows in large-scale hoppers for biofuel production and electrode calendering in battery manufacturing using DEM. Our simulations predict flow blockage in large scale biomass hoppers and electrode microstructure variations, thus providing valuable information for biofuel and battery manufacturers, respectively. The second half of the talk will be on MPM and its application towards pore resolved simulations of reverse osmosis membranes under compressive loads. We present a validation study of our MPM simulations with membrane microscopy imaging thus providing useful insights on membrane stability under high pressure conditions. We also present a spectral stability analysis of using linear hat, quadratic and cubic spline basis in MPM indicating regions of numerical stability.

BIOMASS FUELS,MATHEMATICS AND COMPUTING↗
DOE OSTI2026

A filter-dependent granular temperature model from large-scale CFD-DEM data

The computational study of strongly-coupled, gas–solid flows at scales relevant to most environmental and engineering applications requires the use of ‘coarse-grained’ methodologies such as the two-fluid model, particle-in-cell approach or the multiphase Reynolds Averaged Navier–Stokes equations. While these strategies enable computations at desirable length- and time-scales, they rely heavily on models to capture important flow physics that occur at scales smaller than the mesh. To date, the models that do exist are based on a limited set of flow conditions, such as very dilute particle phase. To this end, we leverage a large-scale repository of CFD-DEM data to develop filter-size dependent models for the mean variance in particle volume fraction, a quantity commonly used to assess the degree of clustering, and the granular temperature, a key quantity for accurately predicting gas–solid flows. In conclusion, because of its filter-size dependence, the granular temperature model can be directly translated to coarse-grained approaches and tied directly to grid size.

AMReX↗
DOE OSTI2024

Modeling Dense Particle Flow in Multistage and Obstructed Flow Receivers Using High Fidelity Simulations

Particles are a leading contender for next-generation, concentrating solar power technologies, and the design of the particle receiver is critical to minimize the levelized cost of electricity. Falling particle receivers (FPRs) are a viable receiver concept, but many new designs feature complex particle obstructions that include dense discrete phase flows. This creates additional challenges for modeling as particle-to-particle interactions (i.e., collisions) and particle drag become more complex. To improve upon existing modeling strategies, a CFD-DEM simulation capability was created by coupling two independent codes: Sierra/Fuego and LAMMPS. A suitable receiver model was then defined using a traditional continuum-based model for the air and a granular model for the particle curtain. A sensitivity study was executed using this model to determine the relevance of different granular model inputs on important quantities of interest in obstructed flow FPRs: the particle velocity and curtain opacity. The study showed that the granular model inputs had little effect on the particle velocity magnitude and curtain opacity after an obstruction.

Mills, Brantley↗
DOE OSTI2026

Detector architecture and data flow of the CMS HGCAL Phase-2 Endcap Calorimeter Upgrade

The CMS High Granularity Calorimeter (HGCAL) is the Phase-2 endcap calorimeter upgrade for the High-Luminosity Large Hadron Collider, designed to provide precise spatial, energy, and timing measurements in a high-radiation, high-pileup environment. This work presents an overview of the HGCAL assembly process, detector architecture, and end-to-end data flow. The data flow goes from signal generation in silicon sensors and scintillator tiles through front-end electronics, optical transmission, and back-end data acquisition. The study highlights how the integrated detector, electronics, and readout systems enable efficient event reconstruction and support the physics objectives of the HL-LHC.

Osei Boakye, Prince [Grambling State U.]↗
NASA NTRS1992

Microgravity fluid physics research in the Space Station Freedom era

Microgravity fluid physics covers an exciting range of established and potential fields of scientific research. Areas in which the Microgravity Science and Applications Division of NASA's Office of Space Science and Applications is currently supporting research include: multiphase flow and phase change heat transfer, behavior of granular media and colloids; and interface dynamics, morphological stability, and contact line phenomena. As they contribute to our knowledge of fluid behavior, advances in these areas will enhance our understanding of materials processing on Earth and in space, and will contribute to technologies as diverse as chemical extraction, the prediction of soil behavior in earthquakes, and the production of oil reservoirs. NASA' s primary platform for research in microgravity fluid physics will soon be the Fluid Physics/Dynamics Facility on Space Station Freedom. This facility shares a rack for control and utilities with the Modular Combustion Facility, and has one rack for experiment-unique instruments. It is planned to change out the content of the experiment-unique rack at intervals on the order of one year. In order to obtain a maximum return on the operation of the facility during these intervals, the research community must carefully plan and coordinate an effort that brings the efforts of many investigators to bear on problems of particular importance. NASA is currently working with the community to identify research areas in which microgravity can make a unique and valuable contribution, and to build a balanced program of research around these areas or thrusts. Selections will soon be made from our first solicitation for research in fluid dynamics and transport phenomena. These solicitations will build the research community that will make Space Station Freedom a catalyst for scientific and technological discovery, and offer U.S. scientists in many disciplines a unique opportunity to participate in space science.

Carpenter, Bradley M.↗
DOE OSTI2026

CaloTrilogy: Toward a Breakthrough in One-Step, End-to-End, Physics-Guided Shower Generation for Modern Calorimeters

High-precision calorimeter simulation at current and future colliders imposes rapidly growing computational demands, motivating the development of machine-learning surrogates for traditional Monte Carlo tools such as Geant4. Flow matching and diffusion-based generative models have become leading approaches for high-dimensional fast simulation because of their sample quality, but typically require ${\cal O}(100)$ function evaluations at inference and often rely on auxiliary networks to constrain global observables, compromising streamlined end-to-end generation. We introduce a unified framework that improves the balance between speed, shower quality, and physics fidelity. The method combines: (i) an average velocity field integrator that enables sampling in one or a few evaluations; (ii) a learned generative prior in shower space, constructed from data rather than random noise; and (iii) physics-guided loss terms that impose inductive biases on key observables during training. These elements are training time regularizers, preserving end-to-end inference with no additional cost. With only one or a few evaluation steps, the model achieves shower quality competitive with state-of-the-art flow and diffusion approaches, tested on several public high granularity calorimeter datasets. The results demonstrate inter-layer shower structure consistent with the underlying physics, providing a strong candidate for future fast simulation workflows.

Jiang, Cheng [Edinburgh U.]↗
NASA NTRS1994

Capillary Movement of Liquid in Granular Beds in Microgravity

A more complete understanding of the dynamics of capillary flow through an g unsaturated porous medium would be useful for a number of space and terrestrial applications. One such application involves the development of an effective water and nutrient delivery system for the growth of plants in space. An experiment was conducted on the Mir Space Station that used an experimental cuvette called "Capillary Test Bed". An objective of this experiment was to compare fluid migration in the "Capillary Test Bed" under terrestrial laboratory simulated microgravity conditions by positioning the cuvette such that the hydrostatic force is negated and on Mir at microgravity conditions. Difference in fluid migration in the cuvette were observed. Based on these observations, improvements in the design of the cuvette are under-way that should allow for collection of more precise data in future flight experiments. The results of the MIR experiment and modifications being made to the cuvette for improved data collection will be discussed.

Yendeler, Boris S.↗
NASA NTRS1996

Capillary movement of liquid in granular beds in microgravity

A more complete understanding of the dynamics of capillary flow through an unsaturated porous medium would be useful for the development of an effective water and nutrient delivery system for the growth of plants in space. An experiment was conducted on the Mir Space Station that used an experimental cuvette called "Capillary Test Bed" to compare fluid migration under terrestrial laboratory conditions by positioning the cuvette such that the hydrostatic force is negated and on Mir under microgravity conditions. Differences in fluid migration in the cuvette were observed with migration being slower in microgravity compared with some ground control experiments.

Mir Project↗
NASA NTRS1988

Catalytic ignition of hydrogen/oxygen

An experimental program was conducted to evaluate the catalytic ignition of gaseous hydrogen and oxygen. Shell 405 granular catalyst and a unique monolithic sponge catalyst were tested. Mixture ratio, mass flow rate, propellant inlet temperature, and back pressure were varied parametrically in testing to determine the operational limits of a catalytic igniter. The test results showed that the gaseous hydrogen/oxygen propellant combination can be ignited catalytically using Shell 405 catalyst over a wide range of mixture ratios, mass flow rates, and propellant injection temperatures. These operating conditions must be optimized to ensure reliable ignition for an extended period of time. The results of the experimental program and the established operational limits for a catalytic igniter using both the granular and monolithic catalysts are presented. The capabilities of a facility constructed to conduct the igniter testing and the advantages of a catalytic igniter over other ignition systems for gaseous hydrogen and oxygen are also discussed.

Green, James M.↗
DOE OSTI2025

The efficacy and ecological impact of mercury sorbents on the physiology and reproductive fitness of Daphnia magna

Environmental mercury (Hg) contamination threatens ecosystems due to its bioaccumulation and toxicity. Effective and sustainable remediation strategies are essential, with carbon-based sorbents like biochar (BC) and activated carbon (AC) gaining attention for their high adsorption capacity and cost-effectiveness. However, their ecological impacts remain poorly understood. This study evaluates the Hg removal efficacy and ecological effects of three sorbents—BC, granular AC (GAC), and AC fiber (ACF)—in a flow-through column system with and without Hg additions. We tested Hg removal at two concentrations (1 and 4 µg/L Hg) and assessed chronic exposure effects on a sentinel and sensitive freshwater organism, Daphnia magna, over 30 days of exposure to the columns’ effluent. GAC removed 100 % of Hg, while BC and ACF achieved 99 % removal. The ACF + 4 µg/L Hg effluent induced 70 % lethality in D. magna after nearly three weeks of exposure, while the GAC effluent significantly reduced fecundity, even in the absence of Hg exposure. In contrast, the BC effluent enhanced reproductive output, likely due to inputs of carbon and nitrogen in the effluent. These findings highlight the need to balance Hg removal efficacy with ecological safety, emphasizing the importance of considering both remediation effectiveness and potential environmental impacts.

Activated carbon↗