Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fill fraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

The interstellar medium in the starburst regions of NGC 253 and NGC 3256

We discuss observations of the (C II) 158 micrometers, (O I) 63 micrometers, (Si II) 35 micrometers, (O III) 52,88 micrometers, and (S III) 33 micrometers fine-structure transitions toward the central 45 seconds of the starburst galaxies NGC 253 and NGC 3256. The (C II) and (O I) emission probably originates in photodissociated gas at the surfaces of molecular clouds, although a small (less than or approximately 30%) contribution to the (C II) flux from H II regions cannot be ruled out. The (O III) and (S III) lines originate in H II regions and the (Si II) flux is best explained as originating in H II regions with some contribution from photodissociation regions (PDRs). The gas phase silicon abundance is nearly solar in NGC 253, which we interpret as evidence for grain destruction in the starburst region. We find that the photodissociated atomic gas has densities approximately 10(exp 4)/cu cm and temperature 200-300 K. About 2% of the gas is in this phase. The thermal gas pressure in the PDRs, P(PDR)/k approximately 1-3 x 10(exp 6) K/cu cm, might represent the 'typical' interstellar gas pressure in starburst systems. The Far Ultraviolet (FUV) radiation fields illuminating the clouds are 10(exp 3)-10(exp 4) stronger than the local Galactic FUV field and come from the contribution of many closely packed O and B stars. For the central 250 pc of NGC 253, we find that the H II gas has an average density n(sub e) is approximately 400/cu cm. This corresponds to a thermal pressure P(H II)/k approximately 7 x 10(exp 6) K/cu cm which is approximately P(PDR)/k, suggesting that the ionized gas is in pressure equilibrium with the photodissociated gas at the surfaces of molecular clouds. The H II gas fills a significant fraction, approximately 0.01-0.3, of the volume between the clouds. The effective temperature of the ionizing stars in NGC 253 is greater than or approximately 34,500 K; 2 x 10(exp 5) O7.5 stars would produce the observed Lyman countinuum photon luminosity. The average separation between the stars is approximately 3 pc. Applying the simple model for the interstellar medium in galactic nuclei of Wolfire, Tielens, & Hollenbach (1990), we find the molecular gas in the central regions of NGC 253 and NGC 3256 to be distributed in a large number (5 x 10(exp 3) to 5 x 10(exp 5)) of small (0.5-2 pc), dense (approximately 10(exp 4)/cu cm) clouds (or alternatively 'thin-flattened' structures) with volume filling factors 10(exp -3) to 10(exp -2), very different from the local Interstellar Medium (ISM) of the Galaxy. We suggest a self-consistent scenario for the ISM in NGC 253 in which clouds and H II gas are in pressure balance with a supernova-shocked, hot 1-3 x 10(exp 6) K, low-density (approximately 10(exp 4)/cu cm), all pervasive medium. A feedback mechanism may be indicated in which the pressure generated by the supernovae compresses the molecular clouds and triggers further massive star formation. The similarity of ISM parameters deduced for NGC 253, NGC 3256, and M82 (Lord et al. 1993) suggests that the ISM properties are independent of the luminosity of the starburst or the triggering mechanism, but are rather endemic to starburst systems. The starburst in NGC 3256 appears to be a scaled-up version of the NGC 253 and M82 starbursts.

Carral, P.↗
NASA NTRS2018

Impacts of Snow and Cloud Covers on Satellite-Derived PM 2.5 Levels

Satellite aerosol optical depth (AOD) has been widely employed to evaluate ground fine particle (PM 2.5 ) levels, whereas snow/cloud covers often lead to a large proportion of non-random missing AOD. As a result, the fully covered and unbiased PM 2.5 estimates will be hard to generate. Among the current approaches to deal with the data gap issue, few have considered the cloud-AOD relationship and none of them have considered the snow-AOD relationship. This study examined the impacts of snow and cloud covers on AOD and PM 2.5 and made full-coverage PM 2.5 predictions with the consideration of these impacts. To estimate the missing AOD, daily gap-filling models with snow/cloud fractions and meteorological covariates were developed using the random forest algorithm. By using these models in New York State, a daily AOD data set with a 1-km resolution was generated with a complete coverage. The“out-of-bag” R 2 of the gap-filling models averaged 0.93 with an interquartile range from 0.90 to 0.95. Subsequently, a random forest-based PM 2.5 prediction model with the gap-filled AOD and covariates was built to predict fully covered PM 2.5 estimates. A ten-fold cross-validation for the prediction model showed a good performance with an R 2 of 0.82. In the gap-filling models, the snow fraction was of higher significance in the snow season compared with the rest of the year. The prediction models fitted with/without the snow fraction also suggested the discernible changes in PM 2.5 patterns, further confirming the significance of this parameter. Compared with the methods without considering snow and cloud covers, our PM 2.5 prediction surfaces showed more spatial details and reflected small-scale terrain-driven PM 2.5 patterns. The proposed methods can be generalized to the areas with extensive snow/cloud covers and large proportions of missing satellite AOD for predicting PM 2.5 levels with high resolutions and complete coverage.

AOD↗
DOE OSTI2023

Tunable spin and valley excitations of correlated insulators in Γ-valley moiré bands

Moiré superlattices formed from transition metal dichalcogenides (TMDs) have been shown to support a variety of quantum electronic phases that are highly tunable using applied electromagnetic fields. While the valley character of the low-energy states dramatically affects optoelectronic properties in the constituent TMDs, this degree of freedom has yet to be fully explored in moiré systems. Here, we establish twisted double bilayer WSe 2 as an experimental platform to study electronic correlations within Γ-valley moiré bands. Through a combination of local and global electronic compressibility measurements, we identify charge-ordered phases at multiple integer and fractional moiré band fillings ν. By measuring the magnetic field dependence of their energy gaps and the chemical potential upon doping, we reveal spin-polarized ground states with novel spin polaron quasiparticle excitations. In addition, an applied displacement field allows us to realize a new mechanism of metal-insulator transition at ν=–1 driven by tuning between Γ- and K-valley moiré bands. Together, our results demonstrate control over both the spin and valley character of the correlated ground and excited states in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Interlayer Exciton Condensates between Second Landau Level Orbitals in Double Bilayer Graphene

Here, we present Coulomb-drag measurements on a heterostructure comprising two Bernal-stacked bilayer graphene (BLG) sheets separated by a 2.5 nm hexagonal boron nitride (hBN) spacer in the quantum Hall (QH) regime. Using top and bottom gate control, together with an interlayer bias, we independently tune the two BLG layers into either the lowest (N = 0) or second (N = 1) Landau level (LL) orbital and probe their interlayer QH states. When both layers occupy the N = 0 orbital, we observe both interlayer exciton condensates (ECs) at integer total filling and interlayer fractional QH states, echoing the results in double monolayer graphene. In contrast to previous studies, however, when both BLG layers occupy the N = 1 orbital, we also observe quantized drag signals, signifying an interlayer exciton condensate formed between the second LLs. By tuning the layer degree of freedom, we find that this N = 1 EC state arises only when the N = 1 wave function in each BLG is polarized toward the hBN interface to maximize the interlayer Coulomb interaction.

Electrical conductivity↗
DOE OSTI2021

Quantum Ergodicity in the Many-Body Localization Problem

Here, we generalize Page’s result on the entanglement entropy of random pure states to the many-body eigenstates of realistic disordered many-body systems subject to long-range interactions. This extension leads to two principal conclusions: first, for increasing disorder the “shells” of constant energy supporting a system’s eigenstates fill only a fraction of its full Fock space and are subject to intrinsic correlations absent in synthetic high-dimensional random lattice systems. Second, in all regimes preceding the many-body localization transition individual eigenstates are thermally distributed over these shells. These results, corroborated by comparison to exact diagonalization for an SYK model, are at variance with the concept of “nonergodic extended states” in many-body systems discussed in the recent literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1979

Spatial distribution and broad-band spectral characteristics of the diffuse X-ray background, 0.1 - 1.0 keV

Preliminary maps covering more than 85 percent of the sky are presented for three energy bands: the B band, the C band, and the M band. The study was undertaken to find evidence that most of the diffuse X-ray background at energies less than 1 keV is local to the galaxy and that it is most probably due to thermal radiation from a low density plasma which fills a substantial fraction of interstellar space. A preliminary analysis of the data is provided including a report that most of the B and C band flux has a common origin, probably in a 10 to the 6th power K region surrounding the Sun, and that most of the M band flux does not originate from the same material.

Mccammon, D.↗
NASA NTRS1985

Rings of Uranus - Not so thick, not so black

Regarding the optical thickness of the rings of Uranus (measured by stellar occultations), it is shown that the optical thickness so obtained is larger by an extinction efficiency factor of 2 than the fractional area physically filled by particles which is commonly used to infer both particle reflectivity and particle size. New estimates of particle reflectance are presented, which include this effect and an improved radiative transfer treatment. The ring particles, while still quite dark, are no longer mysteriously so. Particle sizes could easily lie in the macroscopic size range characteristic of other planetary rings.

Cuzzi, J. N.↗
NASA NTRS1994

Radial velocity measurements of the chromospherically-active stars (2): HD 28591 = V492 Per

From two sets of the spectroscopic observations covering a ten year period we have obtained 59 radial velocities of the chromospherically-active star HD 28591 = V492 Per. It is a G9III single-lined spectroscopic binary with a period of 21.2910 days and a circular orbit. The upsilon sin i of 24.6 km/sec, results in a minimum radius 10.3 solar radii. We estimate a distance of 165 +/- 40 pc and an orbital inclination of 65 +/- 25 degrees. The secondary is probably a mid to late-type K dwarf. The star is brighter than the limiting magnitude of the Bright Star Catalogue. The mean photometric and the orbital periods are identical within their uncertainties. Since the star fills a significant fraction of its Roche lobe, about 62%, the photometric light curve may be the result of starspots and a modest ellipticity effect.

Dadonas, V.↗
NASA NTRS2006

The EPIC-MOS Particle-Induced Background Spectrum

We have developed a method for constructing a spectrum of the particle-induced instrumental background of the XMM-Newton EPIC MOS detectors that can be used for observations of the diffuse background and extended sources that fill a significant fraction of the instrument field of view. The strength and spectrum of the particle-induced background, that is, the background due to the interaction of particles with the detector and the detector surroundings, is temporally variable as well as spatially variable over individual chips. Our method uses a combination of the filter-wheel-closed data and a database of unexposed-region data to construct a spectrum of the "quiescent" background. We show that, using this method of background subtraction, the differences between independent observations of the same region of "blank sky" are consistent with the statistical uncertainties except when there is clear evidence of solar wind charge exchange emission. We use the blank sky observations to show that contamination by SWCX emission is a strong function of the solar wind proton flux, and that observations through the flanks of the magnetosheath appear to be contaminated only at much higher solar wind fluxes. We have also developed a spectral model of the residual soft proton flares, which allows their effects to be removed to a substantial degree during spectral fitting.

Kuntz, K. D.↗
DOE OSTI2024

Energy Gap of the Even-Denominator Fractional Quantum Hall State in Bilayer Graphene

Bernal bilayer graphene hosts even-denominator fractional quantum Hall states thought to be described by a Pfaffian wave function with non-Abelian quasiparticle excitations. Here, in this study, we report the quantitative determination of fractional quantum Hall energy gaps in bilayer graphene using both thermally activated transport and by direct measurement of the chemical potential. We find a transport activation gap of 5.1 K at B = 12 T for a half filled N = 1 Landau level, consistent with density matrix renormalization group calculations for the Pfaffian state. However, the measured thermodynamic gap of 11.6 K is smaller than theoretical expectations for the clean limit by approximately a factor of 2. We analyze the chemical potential data near fractional filling within a simplified model of a Wigner crystal of fractional quasiparticles with long-wavelength disorder, explaining this discrepancy. Our results quantitatively establish bilayer graphene as a robust platform for probing the non-Abelian anyons expected to arise as the elementary excitations of the even-denominator state.

36 MATERIALS SCIENCE↗
NASA NTRS2022

A Novel Machine Learning-Based Gap-Filling of Fine-Resolution Remotely Sensed Snow Cover Fraction Data By Combining Downscaling and Regression

Satellite-based remotely sensed observations of snow cover fraction (SCF) can have data gaps in spatially distributed coverage from sensor and orbital limitations. We mitigate these limitations in the example fine-resolution Moderate Resolution Imaging Spectroradiometer (MODIS) data by gap-filling using auxiliary 1-km datasets that either aid in downscaling from coarser-resolution (5 km) MODIS SCF wherever not fully covered by clouds, or else by themselves via regression wherever fully cloud covered. This study’s prototype predicts a 1-km version of the 500-m MOD10A1 SCF target. Due to noncollocatedness of spatial gaps even across input and auxiliary datasets, we consider a recent gap-agnostic advancement of partial convolution in computer vision for both training and predictive gap-filling. Partial convolution accommodates spatially consistent gaps across the input images, effectively implementing a two-dimensional masking. To overcome reduced usable data from noncollocated spatial gaps across inputs, we innovate a fully generalized three-dimensional masking in this partial convolution. This enables a valid output value at a pixel even if only a single valid input variable and its value exist in the neighborhood covered by the convolutional filter zone centered around that pixel. Thus, our gap-agnostic technique can use significantly more examples for training (∼67%) and prediction (∼100%), instead of only less than 10% for the previous partial convolution. We train an example simple three-layer legacy super-resolution convolutional neural network (SRCNN) to obtain downscaling and regression component performances that are better than baseline values of either climatology or MOD10C1 SCF as relevant. Our generalized partial convolution can enable multiple Earth science applications like downscaling, regression, classification, and segmentation that were hindered by data gaps.

Soni Yatheendradas↗
NASA NTRS1998

Evidence that the X-Ray Plasma in Microflares is in a Sequence of Subresolution Magnetic Tubes

We analyze the cooling of the X-ray emitting thermal plasma in microflares observed in active regions by the Yohkoh Soft X-ray Telescope. A typical microflare appears to be a transient brightening of an entire small magnetic loop, often having a diameter near the limit of resolution (approximately 2 x 10(exp 8) cm) (Shimizu 1995, PASJ, 47, 251). The X-ray plasma in the loop cools by emission of XUV radiation and by heat conduction to the cooler plasma at the feet of the loop. The cooling rate is determined by the plasma temperature and density and the loop length. The plasma density is determined from the observed X-ray brightness of the loop in combination with the temperature, the loop diameter, and the filling factor. The filling factor is the volume fraction of the loop occupied by the subset of magnetic tubes that is filled by the X-ray plasma and that contains practically all of the X-ray plasma present in the microflare loop. Taking typical values from the hundreds of microflares measured by Shimizu (1995) (X-ray brightness through the thin aluminum filter approximately 4 x 10(exp 3) DN/s/pixel, lifetime approximately 5 min, temperature approximately 6 x 10(exp 6) K, loop length approximately 10(exp 9) cm, loop diameter approximately 3 x 10(exp 8) cm), we find that for filling factors greater than approximately 1% (1) the cooling time is much shorter than the duration of the microflare, and (2) conductive cooling strongly dominates over radiative cooling. Because the cooling time is so short and because the conductive heat flux goes mainly into increasing the plasma density via chromospheric evaporation, we are compelled to conclude that (1) heating to X-ray temperatures continues through nearly the entire life of a microflare, (2) the heating keeps changing to different field lines, so that any one magnetic tube in the sequence of heated tubes emits X-rays only briefly in the life of the microflare, and (3) at any instant during the microflare the tubes filled with X-ray plasma occupy only a small fraction (less than approximately 10%) of the microflare loop. Hence, we expect that coronal X-ray images with spatial resolution 2-3 times better than from Yohkoh will show plenty of rapidly changing filamentary substructure in microflares.

Moore, Ronald L.↗
DOE OSTI2020

Collective Excitations at Filling Factor 5/2: The View from Superspace

Herein, we present a microscopic theory of the neutral collective modes supported by the non-Abelian fractional quantum Hall states at filling factor 5/2. The theory is formulated in terms of the trial states describing the Girvin–MacDonald–Platzman mode and its fermionic counterpart. These modes are superpartners of each other in a concrete sense, which we elucidate.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Resolution X-ray Spectromicroscopy Reveals Process-Structure Correlations in sub-5-μm Diameter Carbon Nanotube-Polymer Composite Dry-Spun Yarns

A persistent lack of detailed and quantitative structural analysis of these hierarchical carbon nanotube (CNT) ensembles precludes establishing processing-structure-property relationships that are essential to enhance macroscale performance (e.g., in mechanical, electrical, thermal applications). Here, in this work, we use scanning transmission X-ray microscopy (STXM) to analyze the hierarchical, twisted morphology of dry-spun CNT yarns and their composites, quantifying key structural characteristics such as density, porosity, alignment, and polymer loading. As the yarn twist density increases (15,000 to 150,000 turns per meter), the yarn diameter decreased (4.4–1.4 μm) and density increased (0.55–1.26 g·cm –3 ), as intuitively expected. Yarn density, ρ, ubiquitously scaled with diameter d according to ρ ~ d –2 for all parameters studied here. Spectromicroscopy probes with 30 nm resolution and elemental specificity were employed to analyze the radial and longitudinal distribution of the oxygen-containing polymer content (~30% weight fraction), demonstrating nearly perfect filling of the voids between CNTs with a vapor-phase polymer coating and cross-linking process. These quantitative correlations highlight the intimate connections between processing conditions and yarn structure with important implications for translating the nanoscale properties of CNTs to the macroscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Front-End Design for SiPM-Based Monolithic Neutron Double Scatter Imagers

Neutron double scatter imaging exploits the kinematics of neutron elastic scattering to enable emission imaging of neutron sources. Due to the relatively low coincidence detection efficiency of fast neutrons in organic scintillator arrays, imaging efficiency for double scatter cameras can also be low. One method to realize significant gains in neutron coincidence detection efficiency is to develop neutron double scatter detectors which employ monolithic blocks of organic scintillator, instrumented with photosensor arrays on multiple faces to enable 3D position and multi-interaction time pickoff. Silicon photomultipliers (SiPMs) have several advantageous characteristics for this approach, including high photon detection efficiency (PDE), good single photon time resolution (SPTR), high gain that translates to single photon counting capabilities, and ability to be tiled into large arrays with high packing fraction and photosensitive area fill factor. However, they also have a tradeoff in high uncorrelated and correlated noise rates (dark counts from thermionic emissions and optical photon crosstalk generated during avalanche) which may complicate event positioning algorithms. We have evaluated the noise characteristics and SPTR of Hamamatsu S13360-6075 SiPMs with low noise, fast electronic readout for integration into a monolithic neutron scatter camera prototype. The sensors and electronic readout were implemented in a small-scale prototype detector in order to estimate expected noise performance for a monolithic neutron scatter camera and perform proof-of-concept measurements for scintillation photon counting and three-dimensional event positioning.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Parametric Instability of Alfvén Waves and Wave Packets in Periodic and Open Systems

The parametric decay instability of Alfvén waves has been widely studied, but few investigations have examined wave packets of finite size and the effect of different boundary conditions on the growth rate. In this paper, we perform a linear analysis of circular and arc-polarized wave trains and wave packets in periodic and open boundary systems in a low- β plasma. We find that both types of wave are 3–5 times more stable in open boundary conditions compared to periodic. Additionally, once the wave packet width ℓ becomes smaller than the system size L , the growth rate decreases nearly with a power law γ ∝ ℓ / L . This study demonstrates that the stability of a pump wave cannot be separated from the laboratory settings, and that the growth rate of daughter waves depends on the conditions downstream and upstream of the pump wave and on the fraction of volume it fills. Our results can explain simulations and experiments of localized Alfvén waves. They also suggest that Alfvénic fluctuations in the solar wind, including sharp impulses known as switchbacks, can be more stable than traditional theory suggests depending on wind conditions.

Alfven waves↗
NASA NTRS1988

Global impact of the Antarctic ozone hole: Simulations with a 3-D chemical transport model

A study of the Antarctic ozone hole was made with a 3-D chemical transport model using linearized photochemistry for ozone based on observed distribution. The tracer model uses the winds and convection from the GISS general circulation model (8 deg x 10 deg x 23 layers). A 3-year control run of the ozone distribution is compared with the observed climatology. In two experiments, a hypothetical Antarctic ozone hole is induced on October 1 and on November 1; the tracer model is integrated for 1 year with the standard linearized chemistry. The initial depletion, 90 percent of the O sub 3 poleward of 70 S between 25 and 180 mbar, amounts to about 5 percent of the total O sub 3 in the Southerm Hemisphere. As the vortex breaks down and the hole is dispersed, significant depletions to column ozone, of order 10 D.U., occur as far north as 36 S during Austral summer. One year later, about 25 percent of the original depletion remains, mostly below 100 mbar and poleward of 30 S. Details of the calculations are shown, along with a budget analysis showing the fraction of the hole filled in by photochemistry versus that transported into the troposhere.

Prather, Michael J.↗