Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “explosive flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Steady detonation propagation in thin channels with strong confinement

We examine asymptotically the dynamics of two-dimensional, steady detonation wave propagation and failure for a strongly confined high explosive (HE), in which the width of the explosive is small relative to the reaction zone length. An energy balance equation is derived, which shows how the longitudinal acceleration of subsonic flow behind the detonation shock is influenced both by chemical reaction and by the effects of HE boundary streamline deflection, specifically via the induced rate of change of mass flux through the detonation wave. The latter serves to either counteract or reinforce the acceleration of longitudinal flow, depending on the sign of the gradient of the boundary streamline deflection at the detonation shock. The analysis is valid for general equations of state and chemical reaction rates in the HE. The asymptotically derived form of the energy equation represents an eigenvalue problem for the determination of the steady detonation propagation speed, solved via a shooting method. We explore specific results for ideal and stiffened equations of state, along with a pressure-dependent reaction rate for which changes in the pressure exponent and reaction order are also studied. We consider the influences of both straight and curved HE boundary streamline shapes. The asymptotic analysis reveals significant physical insights into how detonation propagation and failure are affected by strong confinement.

42 ENGINEERING↗
DOE OSTI2024

Towards maintaining canine training aid integrity: Effects of environmental factors and operational use on the triacetone triperoxide polymer odor capture‐and‐release system

Abstract There are many factors that may affect the longevity of or guide the use of canine training aids. Literature to date has mainly focused on identifying the headspace volatiles associated with training aids or odors and only minimal research exists into how different variables may alter those volatiles. The current study examines several factors affecting canine training aids: humidity, air flow, transportation, and operational deployment, using the triacetone triperoxide polymer odor capture‐and‐release canine training aid (TATP POCR) as the target. The TATP POCR is an absorption‐based canine training aid developed to be used to safely train canines to detect the odor of the explosive TATP in operational settings. Comparisons of the TATP POCR to neat TATP are made throughout the manuscript. First, humidity increased the background components of the POCR matrix, as well as the amount of TATP recovered was above the POCR. Humidity thus affected the amount of TATP detected but did not prevent detection. Second, air flow lessened the lifetime of the TATP POCR. Third, the practice of using primary and secondary containment successfully prevented contamination, cross‐contamination, and significant target loss, thereby maintaining kit integrity. Finally, the absorption of background odors from training environments was not observed. TATP headspace concentrations between a Deployed and Control POCR kit were not significantly different at time 0 (i.e., upon opening), which suggests that the operational use does not affect the function of the TATP POCR system. This information provides pivotal evidence for explosives detection canine handlers or trainers who utilize the TATP POCR.

Legal Medicine↗
DOE OSTI2021

Large Eddy Simulations of Turbulent and Buoyant Flows in Urban and Complex Terrain Areas Using the Aeolus Model

Fast and accurate predictions of the flow and transport of materials in urban and complex terrain areas are challenging because of the heterogeneity of buildings and land features of different shapes and sizes connected by canyons and channels, which results in complex patterns of turbulence that can enhance material concentrations in certain regions. To address this challenge, we have developed an efficient three-dimensional computational fluid dynamics (CFD) code called Aeolus that is based on first principles for predicting transport and dispersion of materials in complex terrain and urban areas. The model can be run in a very efficient Reynolds average Navier–Stokes (RANS) mode or a detailed large eddy simulation (LES) mode. The RANS version of Aeolus was previously validated against field data for tracer gas and radiological dispersal releases. As a part of this work, we have validated the Aeolus model in LES mode against two different sets of data: (1) turbulence quantities measured in complex terrain at Askervein Hill; and (2) wind and tracer data from the Joint Urban 2003 field campaign for urban topography. As a third set-up, we have applied Aeolus to simulate cloud rise dynamics for buoyant plumes from high-temperature explosions. For all three cases, Aeolus LES predictions compare well to observations and other models. These results indicate that Aeolus LES can be used to accurately simulate turbulent flow and transport for a wide range of applications and scales.

42 ENGINEERING↗
DOE OSTI2021

Trace explosive residue detection of HMX and RDX in post-detonation dust from an open-air environment

Explosives are often used in industry, geology, mining, and other applications, but it is not always clear what remains after a detonation or the fate and transport of any residual material. The goal of this study was to determine to what extent intact molecules of high explosive (HE) compounds are detectable and quantifiable from post-detonation dust and particulates in a field experiment with varied topography. We focused on HMX (1,3,5,7-Tetranitro-1,3,5,7-tetrazocane), which is less studied in field detonation literature, as the primary explosive material and RDX (1,3,5-Trinitroperhydro-1,3,5-triazine) as the secondary material. The experiment was conducted at Site 300, Lawrence Livermore National Laboratory’s Experimental Test Site, in California, USA. Two 20.4 kg and one 40.8 kg above ground explosions (primarily comprised of LX-14, an HMX-based polymer-bonded high explosive) were detonated on an open-air firing area on separate days. The complex terrain of the firing area (e.g., buildings, berm, low-height obstacles) was advantageous to study HE deposition in relation to plume dynamics. Three types of samples were collected up to 100 m away from each shot: surface swipes of aluminum plates, surface swipes of fixed objects, and filters from air samples. We used atmospheric flow tube-mass spectrometry (AFT-MS) to quantify picogram levels of molecular residue of HE material in the post-detonation dust. An aliquot of sample extract in methanol (e.g., 1 µL of 0.5 mL) was placed onto a resistive material and then thermally desorbed into the AFT-MS. We successfully detected and quantified both HMX and RDX in many of the samples. Based on mass (pg) detected and solution dilution, we back-calculated the mass collected on the swipe or filter (ng per sample). The aerial distribution of molecular residue was consistent with the path of the plume, which was strongly determined by wind speed and direction at the time of each shot. The quantity of material detected appeared to correlate more with distance from the shot and the wind conditions than with shot size. This study demonstrates that the picogram detection levels of AFT-MS are well-suited for quantification of analytes (e.g., HMX and RDX) in environmental samples.

atmospheric flow tube-mass spectrometry (AFT-MS), ↗
DOE OSTI2020

Shock-induced kinetics and cellular structures of liquid nitromethane detonation

Using a combination of high-speed diagnostics, optical pyrometry, velocimetry and video photography, we examine the spatiotemporal reaction kinetics of a prototypical high-energy explosive, liquid nitromethane (NM), as we drive this high explosive into detonation. The detonations were initiated by powerful shock waves whose durations (4 ns) were shorter than the characteristic time associated with the reaction (7 ns). Simple optical spectroscopy alone cannot characterize the kinetics with high time resolution because the reactants and products are flowing at a high velocity of ~6 km/s (6 µm/ns). Additionally, every detection volume behind the shock front contains material initiated over a range of times. High spatial resolution can be obtained by probing interfaces where the shock enters or breaks out of the NM. In addition, we obtain cellular patterns imprinted on the luminous shock front by the two-stage explosion in NM. These spatiotemporal patterns arise naturally as a result of the asymmetry produced by the moving shock front. In this way the shock front serves as a thin moving intrinsic optical gauge that reports and characterizes the two-stage NM explosion behind the front.

42 ENGINEERING↗
DOE OSTI2023

Predicted viscosity of liquid HMX up to 40 GPa

Viscous flow serves as a significant heating mechanism during the formation of hot spots, but the shear viscosity which determines this response is poorly characterized for most high explosives. Most recently, a model was proposed for the shear viscosity of liquid HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocane) that was fit to pressures reaching 5 GPa, but this work uncovered uncertainties in the viscosity at 0 GPa and remains untested at higher pressures. We use molecular dynamics (MD) simulations and the Green-Kubo formalism to predict the temperature- and pressure-dependent shear viscosity of HMX over the pressure interval 0 GPa≤P≤40 GPa. Reassessment of the viscosity at 0 GPa rules out several potential explanations for discrepancies between earlier reports; we attribute these differences to details of MD trajectory integration impacting molecular flexibility. The shear viscosity of HMX exhibits an Arrhenius temperature dependence at each pressure considered, with exponential prefactor and activation energy terms that are also strong functions of pressure. An analytic form for the viscosity is developed based on an extension of the well-known Andrade equation that simultaneously captures the temperature and pressure dependencies in the MD data up to 40 GPa. Comparison against a recently developed model for the viscosity of liquid RDX (1,3,5-trinitro-1,3,5-triazinane) shows that both materials exhibit similar functional dependencies with the viscosity of HMX being higher by roughly an order of magnitude at a given temperature-pressure state.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of PBX Prill Size on the Compressive Properties of PBX 9502

Plastic-Bonded Explosive (PBX) prills are agglomerates a few millimeters in diameter composed of High Explosive crystals non-uniformly distributed in and surrounded by a polymer binder. When pressed at elevated temperatures at or above the binder melt temperature the polymer flows to uniformly coat the HE crystals to create a well-consolidated compaction. In reality it does so imperfectly, such that x-ray tomographic scans often look like a collection of prills mashed together. It is speculated that the larger the prill, the more non-uniform the binder distribution, but this has never been proven. Even if that were not so, the larger the prill the farther binder must flow toward the middle to homogenize during pressing. Thus, the degree of homogenization depends in part on prill size. The degree to which binder flows during pressing in turn affects the void distribution within pressed charges, which one suspects will affect shock sensitivity and material strength. In this paper we explore, for ~30 PBX 9502 formulation batches using the same TATB powder lot, how prill size effects the compressive mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The reflection of a blast wave by a very intense explosion

We demonstrate that the geometric similarity of Taylor’s blast wave persists beyond reflection from an ideal surface. Upon impacting the surface, the spherical symmetry of the blast wave is lost but its cylindrical symmetry endures. As the flow acquires dependence on a second spatial dimension, an analytic solution of the Euler equations becomes elusive. However, the preservation of axisymmetry, geometric similarity and planar symmetry in the presence of a mirror-like surface causes all flow solutions to collapse when scaled by the height of burst (HOB) and the shock arrival time at the surface. The scaled blast volume for any yield, HOB and ambient air density follows a single universal trajectory for all scaled time, both before and after reflection.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Vapor Pressures of RDX and HMX Explosives Measured at and Near Room Temperature: 1,3,5-Trinitro-1,3,5-triazinane and 1,3,5,7-Tetranitro-1,3,5,7-tetrazocane

Knowing accurate saturated vapor pressures of explosives at ambient conditions is imperative to provide realistic boundaries on available vapor for ultra-trace detection. In quantifying vapor content emanating from low-volatility explosives, we observed discrepancies between the quantity of explosive expected based on literature vapor pressure values and the amount detected near ambient temperatures. Most vapor pressure measurements for low-volatility explosives, such as RDX (1,3,5-trinitro-1,3,5-triazinane) and HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocane), have been made at temperatures far exceeding 25 °C and linear extrapolation of these higher temperature trends appears to underestimate vapor pressures near room temperature. Our goal was to measure vapor pressures as a function of temperature closer to ambient conditions. We used saturated RDX and HMX vapor sources at controlled temperatures to produce vapors that were then collected and analyzed via atmospheric flow tube-mass spectrometry (AFT-MS). The parts-per-quadrillion (ppqv) sensitivity of AFT-MS enabled measurement of RDX vapor pressures at temperatures as low as 7 °C and HMX vapor pressures at temperatures as low as 40 °C for the first time. Furthermore, these vapor pressures were corroborated with analysis of vapor generated by nebulizing low concentration solutions of RDX and HMX. We report updated vapor pressure values for both RDX and HMX. Based on our measurements, the vapor pressure of RDX at 25 °C is 3 ± 1 x 10-11 atm (i.e. 30 parts per trillion by volume, pptv), the vapor pressure of HMX is 1.0 ± 0.6 x 10-14 atm (10 ppqv) at 40 °C and, with extrapolation, HMX has a vapor pressure of 1.0 ± 0.6 x 10-15 atm (1.0 ppqv) at 25 °C.

RDX, HMX, explosives, vapor pressure, vapor detect↗
DOE OSTI2022

A liquid stratification model to predict failure in thermally damaged EBW detonators

In previous work, commercially available downward facing exploding bridgewire detonators (EBWs) were exposed to elevated temperatures. These detonators were then initiated using a firing set which discharged a high amplitude short duration electrical pulse into a thin gold bridgewire. Responses of the detonators were measured using photonic doppler velocimetry (PDV) and high-speed photography. A time delay of 4 μs between EBW initiation and first movement of an output flyer separated operable detonators from inoperable detonators or duds. Here, we propose a simple method to determine detonator operability from the calculated state of the detonator at the time the firing set is initiated. The failure criterion is based on the gap distance between the exploding bridgewire (EBW) and the adjacent initiating explosive within the detonator which is low-density pentaerythritol tetranitrate (PETN) that melts between 413-415 K (140-142 ºC). The gap forms as PETN melts and flows to the bottom of the input pellet. Melting of PETN is modeled thermodynamically as an energy sink using a normal distribution spread over a temperature range between the onset temperature of 413 K and the ending temperature of 415 K. The extent of the melt is determined from the average temperature of the PETN. The PETN liquid is assumed to occupy the interstitial gas volume in the lower part of the input pellet. The vacated volume from the relocated liquid forms the gap between the EBW and the PETN. The remaining sandwiched layer consists of solid PETN particles and gas filling interstitial volume. We predict that a threshold gap between 17-27 μm separates properly functioning detonators from duds.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Visualization of Hemispherical Post‐Detonation Fireball Internal Structures

Hemispherical charges are initiated above a transparent plate in a half‐plane configuration, allowing optical access to the internal regions of the luminous fireball. High‐speed visualization enables characterization of the internal luminous structure, showing clearly the bright shell and dark core regions. Spectroscopic and pyrometric diagnostics are applied to these flows, generating quantitative information on the spatial distribution of temperature inside the fireball. Both cased and uncased charges can be examined using this methodology, and several different high explosives are tested. This approach can be useful in validation of detailed explosive fireball models. Initial comparisons with such models are presented.

detonation↗
DOE OSTI2022

Detonation Wave Profile (update of LA-UR-15-29498-rev1)

The Zel’dovich-von Neumann-Doering (ZND) profile of a detonation wave is derived. Two basic material properties are required: i. An equation of state (EOS) for a partly burned explosive; P(V, e, λ). ii. A burn rate for the reaction progress variable; d/dtλ = R(V, e, λ). For a steady planar detonation wave the reactive flow PDEs can be reduced to ODEs. The detonation wave profile can be determined from an ODE plus algebraic equations for points on the partly burned detonation loci with a specified wave speed. Furthermore, for the CJ detonation speed, the end of the reaction zone is sonic. A solution to the reactive flow equations can be constructed with a rarefaction wave following the detonation wave profile. This corresponds to an underdriven detonation wave, and the rarefaction is know as a Taylor wave.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

A flow-through gamma detection system for sub-surface radioxenon tracer measurements in LYNM PE1

A continuous flow-through, real-time radioxenon sensor array has been designed to monitor either 127 Xe or 133 Xe tracer gas as part of a series of underground chemical explosions in the Low-Yield Nuclear Monitoring (LYNM) Physics Experiment 1 (PE1). The sensors are pairs of shielded thallium-doped sodium iodide gamma-ray detectors that surround a gas measurement chamber. Each measurement chamber is connected to a sampling location in the geology surrounding the chemical explosion or in the access tunnel. The first experiment in the series, PE1 A, occurred in 2023 and the system quantified the 127 Xe tracer gas in the gas sampling lines for four weeks following the experiment execution. The array generated a set of radioxenon concentration time series with a 15-minute resolution that will be used to refine subsurface gas transport models.

Gamma-ray coincidence detection↗
DOE OSTI2020

PAGOSA Theory Manual

PAGOSA is a computational fluid dynamics program developed at LANL for the study of high-speed compressible flow and high-rate material deformation. PAGOSA is a three-dimensional Eulerian finite-difference code, solving problems with a wide variety of EOS, material strength, and explosive modeling options. This document presents the finite difference equations that are used in the PAGOSA continuum mechanics computer code. This program is especially intended to be used for the numerical simulation of the interactions of gases, fluids, and solids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Explosive Soot Challenge (Final Report)

This project assembled a broad ensemble of modeling and experimentation tools to study the morphological and optical properties of detonation soots in explosive fireballs. A gram-scale hemispherical high explosive was studied in a low-pressure controlled environment using in-situ experimentation with diffusely illuminated visible absorption spectroscopy, particle sizing through light scattering techniques, and post-test collections with subsequent morphological analysis. Hydrocode modeling was performed to replicate the detonation flow observations, and subsequent aerosol kinetics models provided particle size distributions and extinction coefficients from the hydrocode results. Experimentally observed soot morphologies agreed with expectation from the literature - a bimodal distribution was found, brought upon by the particles growing to a size where their inertia and fluid wakes are non-negligible. The aerosol kinetics model did not replicate the observed bimodal size distribution for lack of a coagulation kernel to represent the behavior. To recover particulate optical properties, a spectrally resolved absorption spectroscopy method termed Spectral diffuse back-illuminated extinction imaging (SBI-EI) was developed and implemented on two explosive types. Inverting the absorption spectra using a Kramers-Kronig consistent method yielded the complex index of refraction for the soots produced by the explosives. This method resulted in an unrealistic index of refraction for one of the two explosives, and this is suspected to be due to the model neglecting scattering brought upon by the large particle sizes observed. In addition to the core work, three additional studies were performed in parallel. These investigated the impact of scattering on diffuse absorption spectroscopy, studied how soots oxidate and sublimate in a well-controlled shock tube, and laid the theoretical groundwork for a new collision kernel to replicate the bimodal size distribution from the observations. Summaries of these efforts are included at the end of this report.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Effects of Magnetic Fields on Gas Dynamics and Star Formation in Nuclear Rings

Nuclear rings at the centers of barred galaxies are known to be strongly magnetized. To explore the effects of magnetic fields on star formation in these rings and nuclear gas flows, we run magnetohydrodynamic simulations in which there is a temporally constant magnetized inflow to the ring, representing a bar-driven inflow. The mass inflow rate is 1M ⊙ yr –1 , and we explore models with a range of field strength in the inflow. We adopt the TIGRESS framework developed by Kim & Ostriker to handle radiative heating and cooling, star formation, and resulting supernova (SN) feedback. We find that magnetic fields are efficiently amplified in the ring due to rotational shear and SN feedback. Within a few 100 Myr, the turbulent component Btrb in the ring saturates at ~35 μG (in rough equipartition with the turbulent kinetic energy density), while the regular component Breg exceeds 50 μG. Expanding superbubbles created by clustered SN explosions vertically drag predominantly toroidal fields from near the midplane to produce poloidal fields in high-altitude regions. The growth of magnetic fields greatly suppresses star formation at late times. Simultaneously, strong magnetic tension in the ring drives radially inward accretion flows from the ring to form a circumnuclear disk in the central region; this feature is absent in the unmagnetized model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Detonation performance experiments and modeling for the DAAF-based high explosive PBX 9701

Detonation performance experiments and modeling are reported for the explosive PBX 9701, which is composed of 97% 3,3$\acute{-}$diamino-4,4$\acute{-}$azoxyfurazan (DAAF) and 3% vinylidene uoride-chlorotriuoroethylene copolymer (Kel-F 800) binder by weight. PBX 9701 is a newly-developed reducedsensitivity explosive with increased performance relative to the triaminotrinitrobenzene or TATB-based PBX 9502 while still retaining low sensitivity to mechanical insult. The first detonation performance measurements for this formulation are presented, including front-curvature ratesticks and cylinder expansion test data. Prior shock initiation data is also reviewed. These data are used to develop programmed burn and reactive flow calibrations for existing commonly-used performance models which allow engineering calculations with PBX 9701. The calibration process involves several enhancements relative to conventional approaches including the use of an analytical scaling correlation to speed the calibration process and development of a new methodology to improve the consistency between the programmed burn and reactive model calibration process and the resulting calculations. Overall, PBX 9701 is seen to exhibit improved performance relative to insensitive explosives, with a trinitrotoluene (TNT) equivalence of 1.24. The detonation performance properties are found to be well captured by existing models.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

Simulating Turbulence-aided Neutrino-driven Core-collapse Supernova Explosions in One Dimension

The core-collapse supernova (CCSN) mechanism is fundamentally 3D, with instabilities, convection, and turbulence playing crucial roles in aiding neutrino-driven explosions. Simulations of CCNSe including accurate treatments of neutrino transport and sufficient resolution to capture key instabilities remain among the most expensive numerical simulations in astrophysics, prohibiting large parameter studies in 2D and 3D. Studies spanning a large swath of the incredibly varied initial conditions of CCSNe are possible in 1D, though such simulations must be artificially driven to explode. We present a new method for including the most important effects of convection and turbulence in 1D simulations of neutrino-driven CCSNe, called Supernova Turbulence In Reduced-dimensionality, or STIR. Our new approach includes crucial terms resulting from the turbulent and convective motions of the flow. We estimate the strength of convection and turbulence using a modified mixinglength theory approach, introducing a few free parameters to the model that are fit to the results of 3D simulations. For sufficiently large values of the mixing-length parameter, turbulence-aided neutrino-driven explosions are obtained. We compare the results of STIR to high-fidelity 3D simulations and perform a parameter study of CCSN explosion using 200 solar-metallicity progenitor models from 9 to 120 M ⊙ . We find that STIR is a better predictor of which models will explode in multidimensional simulations than other methods of driving explosions in 1D. We also present a preliminary investigation of predicted observable characteristics of the CCSN population from STIR, such as the distributions of explosion energies and remnant masses.

79 ASTRONOMY AND ASTROPHYSICS↗