Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “environmentally benign”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Quantitative temporally and spatially resolved X-ray fluorescence microprobe characterization of the manganese dissolution-deposition mechanism in aqueous Zn/α-MnO 2 batteries

Rechargeable aqueous Zn/α-MnO 2 batteries are a possible alternative to lithium ion batteries for scalable stationary energy storage applications due to their low cost, safety and environmentally benign components. A critical need for advancement of this battery system is a full understanding of the electrochemical reaction mechanisms, which remain unclear. In this report, operando , spatiotemporal resolved synchrotron X-ray fluorescence mapping measurements on a custom aqueous Zn/α-MnO 2 cell provided direct evidence of a Mn dissolution-deposition faradaic mechanism that governs the electrochemistry. Simultaneous visualization and quantification of the Mn distribution in the electrolyte revealed the formation of aqueous Mn species during discharge and depletion on charge. The findings are supported by ex situ transmission electron microscopy (TEM), X-ray diffraction, Mn K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) measurements. The elucidated mechanism is fundamentally different from the previously proposed Zn 2+ insertion or conversion reactions. These findings provide a foundation for developing dissolution- deposition chemistries suitable for scalable stationary energy storage with aqueous electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2021

Controlling Bacterial Contamination During Fuel Ethanol Fermentation Using Thermochemically Depolymerized Lignin Bio-Oils

Lactic acid bacteria (LAB) contamination during fuel ethanol fermentation can lead to significant economic loses. To circumvent this, fuel ethanol plants add antibiotics prophylactically, but their overuse has resulted in the emergence of antibiotic-resistant LAB strains. Lignin is a sustainable biopolymer that can be found as a waste product from lignocellulosic biorefineries. Technical lignins and their smaller phenolic subunits have been shown to exhibit broad-spectrum antimicrobial properties, but there is a lack of demonstrations of lignin derivatives with highly selective properties in the literature. Here, corn stover lignin from a biorefinery was oxidatively depolymerized using an environmentally benign organic oxidant, peracetic acid, into a bio-oil that has selective antimicrobial properties against LAB and not yeasts. The resulting bio-oil demonstrated up to 90% inhibition of commercially sampled LAB (including antibiotic-resistant strains) at 4 mg ml-1 with no inhibition against an industrial yeast strain. These antimicrobial properties of the bio-oil are attributed to larger unidentified lignin oligomers, compared to monolignols, that have a membrane damaging mode of action. Using the bio-oil (4 mg ml-1) during simultaneous saccharification and fermentation (SSF) of raw corn starch showed no inhibition of enzymatic activity, and in LAB contaminated fermentations the bio-oil treatments showed an 8% increase in ethanol yields at higher bacterial contamination ratios (l : 100 yeast to LAB, CFU per ml). This study illustrates the efficacy of using lignin bio-oil as an antibiotic replacement during fuel ethanol fermentation and demonstrates the highly selective antimicrobial properties of lignin oligomers, which creates a viable lignin valorization strategy for biorefineries.

bio-oil↗
DOE OSTI2022

Conjugated polyelectrolyte-based ternary exciton funnels via liposome scaffolds

There is great interest in developing inexpensive, molecular light-harvesting systems capable of efficiently converting photon energy to chemical potential energy. It is highly desirable to do so using self-assembly and in a manner that supports environmentally benign processing. A critical consideration in any such assembly is the ability to absorb a substantial fraction of the solar emission spectrum and to be able to efficiently move excited states through the space to a functional interface. We have previously shown that aqueous inter-conjugated polyelectrolyte (CPE) complexes can act as ultrafast and efficient energy-transfer antennae. Here we demonstrate formation of a hierarchically assembled, aqueous system based on an inter-CPE exciton donor/acceptor network and a lipid vesicle scaffold. Using a model small-molecule organic semiconductor embedded in the vesicle membrane, we form a ternary exciton funnel that is oriented towards the membrane interior. We show that, although energy transfer is efficient, the assembly morphology depends sensitively on preparation conditions and relative ionic stoichiometry. We propose several approaches towards stabilizing such aqueous assemblies. Furthermore, this work highlights a path to formation of an aqueous, panchromatic light-harvesting system, whose functional complexity can be systematically increased with modularity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sequentially regular polymer acceptors featuring flexible spacers for high-performance and mechanically robust all-polymer solar cells

Developing high-performance and mechanically robust polymer solar cells (PSCs) is crucial for realizing wearable power sources. While efficient all-polymer solar cells (all-PSCs) can be fabricated from polymerized small-molecule acceptors (PSMAs) with high optical absorption and electron mobilities, they still show limited mechanical robustness. Here, we achieve highly efficient and mechanically robust all-PSCs by designing a PSMA (PYFS-Reg) containing sequence-regular flexible spacers (FSs). The regular incorporation of the FS units into PSMAs is essential in simultaneously improving the electrical and mechanical properties of blend films. As a result, all-PSCs featuring PYFS-Reg achieve a high power conversion efficiency (PCE = 16.1%) and stretchability (crack onset strain (COS) = 22.4%), outperforming PSMAs without FSs (i.e., PYBDT, PCE = 12.6% and COS = 11.7%) or with randomly distributed FSs (i.e., PYFS-Ran, PCE = 12.2% and COS = 18.1%). Importantly, these all-PSCs are fabricated by an environmentally benign, non-halogenated solvent process. To further demonstrate their feasible applications in wearable devices, we construct intrinsically stretchable (IS) all-PSCs by using PYFS-Reg-based active layers, which exhibit a high PCE (10.6%) and excellent device stretchability (strain at PCE 80% = 36.7%).

14 SOLAR ENERGY↗
DOE OSTI2024

An overview of various critical aspects of low-cobalt/cobalt-free Li-ion battery cathodes

Cathodes of lithium-ion batteries (LIBs) significantly impact the environmental footprint, cost, and energy performance of the battery-pack. Hence, sustainable production of Li-ion battery cathodes is critically required for ensuring cost-effectiveness, environmental benignity, consumer friendliness, and social justice. Battery chemistry largely determines individual cell performance as well as the battery pack cost and life cycle greenhouse gas emission. Continuous manufacturing platforms improve production efficiency in terms of product yield, quality and cost. Spent-battery recycling ensures the circular economy of critical elements that are required for cathode production. Innovations in fast-charging LIBs are particularly promising for sustainable e-mobility with a reduced carbon footprint. This article provides an overview of these research directions, emphasizing strategies for low-cobalt cathode development, recycling processes, continuous production and improvement in fast-charging capability.

25 ENERGY STORAGE↗
DOE OSTI2026

Pyrodictium abyssi AbpX reveals a calcium-responsive family of microbial biomatrix proteins that form thermostable hydrogels

Evolutionary pressure on microbial communities propagating under extreme environmental conditions often results in unique structural adaptations to promote cell survival. In this work, we report an investigation of AbpX, a biomatrix protein identified in cultures of the hyperthermophilic archaeon Pyrodictium abyssi. Under ex vivo and in vitro conditions, AbpX assembles into a paracrystalline lattice composed of semiflexible fibrils. CryoEM analysis of recombinant AbpX fibrils reveals that the precursor protein polymerizes through donor strand complementation (DSC), a process previously reported for chaperone-usher fimbriae in Gram-negative bacteria. Unlike the latter DSC protein polymers, AbpX undergoes chaperone-free polymerization in the presence of calcium ions, which are sequestered at the donor strand-acceptor groove interface between protomers in the fibril. Using a combination of cryoEM and crystallographic information, a structural model is proposed for the AbpX lattice that provides insight into its potential role in biofilm formation. These findings suggest that calcium ion coordination may contribute to fibril assembly and preorganize fibrils for incorporation into the protein lattice. Bioinformatic analysis indicates that AbpX exemplifies a distinct and broadly distributed clade of calcium ion responsive biomatrix proteins within the TasA superfamily that can be fabricated into hydrogel biomaterials in vitro under environmentally benign conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Science challenges and research opportunities for plasma applications in microelectronics

Low-temperature plasmas (LTPs) are essential to manufacturing devices in the semiconductor industry, from creating extreme ultraviolet photons used in the most advanced lithography to thin film etching, deposition, and surface modifications. It is estimated that 40%–45% of all process steps needed to manufacture semiconductor devices use LTPs in one form or another. LTPs have been an enabling technology in the multidecade progression of the shrinking of device dimensions, often referred to as Moore’s law. New challenges in circuit and device design, novel materials, and increasing demands to achieve environmentally benign processing technologies require advances in plasma technology beyond the current state-of-the-art. The Department of Energy Office of Science Fusion Energy Sciences held a workshop titled Plasma Science for Microelectronics Nanofabrication in August 2022 to discuss the plasma science challenges and technical barriers that need to be overcome to continue to develop the innovative plasma technologies required to support and advance the semiconductor industry. One of the key outcomes of the workshop was identifying a set of priority research opportunities (PROs) to focus attention on the most strategic plasma science challenges to address to benefit the semiconductor industry. For each PRO, scientific challenges and recommended strategies to address those challenges were identified. Furthermore, this article summarizes the PROs identified by the workshop participants.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reversible Ketone Hydrogenation and Dehydrogenation for Aqueous Organic Redox Flow Batteries

Compared to traditional transition metal ion-based counterparts, the realization of organics in aqueous redox flow batteries offers an environmentally benign, tunable, and safe route to large-scale energy storage systems. But development so far has been limited to a small palette of organics that are aqueous soluble and tend to display the necessary redox reversibility within the water stability window. Here we show how molecular engineering of fluorenone enables the alcohol electro-oxidation needed for reversible ketone hydrogenation and dehydrogenation at room temperature without the use of a catalyst. Flow batteries based on these new fluorenone derivative anolytes operate efficiently and exhibit stable long-term cycling at ambient and mildly elevated temperatures in air. These results not only expand the palette to include reversible ketone/alcohol conversion but also suggest the potential for identifying other atypical organic redox couple candidates.

Ketone, Fluorenone, Hydrogenation / Dehydrogenatio↗
DOE OSTI2022

Polymeric multimaterials by photochemical patterning of crystallinity

An organized combination of stiff and elastic domains within a single material can synergistically tailor bulk mechanical properties. However, synthetic methods to achieve such sophisticated architectures remain elusive. We report a rapid, facile, and environmentally benign method to pattern strong and stiff semicrystalline phases within soft and elastic matrices using stereo-controlled ring-opening metathesis polymerization of an industrial monomer, cis -cyclooctene. Dual polymerization catalysis dictates polyolefin backbone chemistry, which enables patterning of compositionally uniform materials with seamless stiff and elastic interfaces. Visible light–induced activation of a metathesis catalyst results in the formation of semicrystalline trans polyoctenamer rubber, outcompeting the formation of cis polyoctenamer rubber, which occurs at room temperature. This bottom-up approach provides a method for manufacturing polymeric materials with promising applications in soft optoelectronics and robotics.

Science & Technology - Other Topics↗
DOE OSTI2021

Microbiome Aggregated Traits and Assembly Are More Sensitive to Soil Management than Diversity

How soil is managed, particularly for agriculture, exerts stresses upon soil microbiomes, resulting in altered community structures and functional states. Understanding how soil microbiomes respond to combined stresses is important for predicting system performance under different land use scenarios, aids in identification of the most environmentally benign managements, and provides insight into how system function can be recovered in degraded soils. We use a long-established field experiment to study the effects of combined chronic (press) disturbance of the magnitude of organic carbon inputs with acute (pulse) effects of physical disturbance by tillage and chemical disturbance due to inorganic fertilization and pesticide application. We show that because of the variety of ways it can be assessed, biodiversity—here based on microbial small subunit rRNA gene phylotypes—does not provide a consistent view of community change. In contrast, aggregated traits associated with soil microbiomes indicate general loss of function, measured as a reduction of average genome lengths, associated with chronic reduction of organic inputs in arable or bare fallow soils and altered growth strategies associated with rRNA operon copy number in prokaryotes, as well as a switch to pathogenicity in fungal communities. In addition, pulse disturbance by soil tillage is associated with an increased influence of stochastic processes upon prokaryote community assembly, but fungicide used in arable soils results in niche assembly of fungal communities compared to untilled grassland. Overall, bacteria, archaea, and fungi do not share a common response to land management change, and estimates of biodiversity do not capture important facets of community adaptation to stresses adequately.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Effect of Electrolytes on the Cathode-Electrolyte Interfacial Stability of Fe-Based Layered Cathodes for Sodium-Ion Batteries

Iron (Fe)-based layered oxide cathodes that employ Fe 3+ /Fe 4+ redox reaction present a family of attractive cathode materials for sodium-ion batteries as iron is abundant, low-cost, and environmentally benign. However, their electrochemical performance is not yet satisfactory and requires further improvement. In this study, we investigate the effect of electrolytes on the electrochemical performance of α -NaFeO 2 , a prototypical model of Fe-based layered cathodes. First, we established the critical impact of the poor cathode-electrolyte interfacial stability on cell performances. Systematic electrochemical tests and material characterizations further revealed the degradation mechanism in which the highly reactive Fe 4+ state in the charged Na 1−x FeO 2 electrodes promotes severe electrolyte decomposition and subsequent growth of a thick interface layer that leads to impedance rise and performance degradation. In addition, the superior performance of NaPF 6 over NaClO 4 and the beneficial effect of the FEC additive are reported.

25 ENERGY STORAGE↗
DOE OSTI2023

Genomic dissection of anthracnose resistance response in sorghum [Sorghum bicolor (L.) Moench]

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum. The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Economic Extraction and Recovery of REEs and Production of Clean Value-Added Products from Low-Rank Coal Fly Ash

The University of North Dakota (UND) Energy & Environmental Research Center (EERC) teamed with Pacific Northwest National Laboratory (PNNL) , the North Dakota Industrial Commission Lignite Research Program, and commercial partners Basin Electric Power Cooperative, Great River Energy, and Southern Company to execute a Cooperative Agreement funded by the U.S. Department of Energy’s (DOE’s) National Energy Technology Laboratory (NETL) focused on identifying unique pathways and pretreatments to extract rare-earth elements (REEs) from low-rank coal (LRC) ash in a more economical and environmentally benign manner than current methods. The EERC drew upon the unique and deep knowledge of the team regarding LRC geochemistry, ash transformation mechanisms during combustion, and fly ash chemistry in the approach to understand the portioning of REEs in LRC ash. A comprehensive characterization effort was undertaken to fully establish the form, associations, and partitioning of the REEs and other elements/minerals of interest in fly ash, as well as the ash chemistry, mineralogy, and morphology. Using this information, the team tested methods of REE extraction to take advantage of the unique and advantageous properties of LRC ash. Multiple complementary approaches were evaluated that combined both novel and proven methods to develop an extractive process for REEs and other high-value metals from LRC ash that provide technological and economic progress on the current state of the art. Methodologies were also evaluated for the potential to synergistically remove toxic metals while extracting other high-value metals from the ash, generating a clean, safe ash material as a value-added product. This would eliminate waste and offer significant additional revenue potential. Based on laboratory-scale testing, an initial high-level technical and economic analysis to estimate operating expenses and product revenues to guide future phases of technology development was implemented. By focusing on minimizing process steps and consumptive use of extraction solutions, a tunable, economically viable process for REE extraction from LRC ash was developed. The tunable process has the ability to be adjusted to adapt to the differing ash chemical and physical properties that are characteristic of LRC ash. This is key to deployment as a commercial process. In demonstrating the process, the EERC was able to illustrate mixed REE concentration greater than the goal of 2 wt%. High-level economic analysis of the process with LRC ash of moderate REE levels demonstrated the potential of the process, but recovery of just the REEs was insufficient to cover operational costs. With the additional extraction of other high-value metals found in LRC ash, the process economics approach would break even, and it is anticipated that with process optimization, the developed process could potentially be economically sound. The same economic analysis performed utilizing LRC ash with high levels of REEs showed the recovery of the REEs alone would make the process economically viable even without further optimization.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

FWP FEW0223: "Advanced Manufactured Carbonate Materials for Algal Biomass Production: Joint LLNL SNL Program" (Final Report)

The ability to easily and cheaply transport carbon dioxide (CO 2 ) from coal-fired power plants equipped with capture facilities to multiple, potentially distant utilization sites of widely varying scales will enable wider use of CO 2 captured from flue gas. In the case of algal biomass cultivation, delivery of CO 2 in the form of carbonate-based materials may provide a more efficient and economical method of inorganic carbon delivery than CO 2 sparging, reducing the cost of algae cultivation and increasing the value of carbon capture. Lawrence Livermore National Laboratory (LLNL) has developed advanced manufactured materials that are well-suited for carbon capture, storage, transport, and delivery. These materials consist of aqueous sodium carbonate, which captures CO 2 as sodium bicarbonate, extruded or 3D printed in a CO 2 permeable polymer to increase the surface area and improve capture kinetics. By encapsulating carbonate solutions, LLNL has demonstrated order-of-magnitude enhancements in carbon capture rates compared with liquid carbonates, enabling the use of these (otherwise kinetically-limited) inexpensive, environmentally-benign solvents for carbon capture.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Microfluidic Liquid-Liquid Extraction Chip with Integrated Raman Sensors (Phase I and Phase II Final Report)

As demand for electricity continues to increase worldwide, the world’s nuclear power generating capacity will continue to grow. Nuclear power is the most environmentally benign way of producing electricity on a large scale. The long-term successful use of nuclear power, however, is critically dependent upon adequate and safe processing and disposal of spent nuclear fuels. A very important feature of nuclear energy is that spent fuels can be reprocessed to recover fissile and fertile materials that can then be used as fresh fuel for nuclear power plants. The DOE-NE Fuel Cycle Research and Development (FCR&D) is currently developing nuclear material reprocessing technologies. In a typical nuclear fuel reprocessing system, centrifugal contactors are used as liquid-liquid extraction devices where two immiscible liquids are mixed at high speeds using a rotor, which creates a fine dispersion of droplets of organic phase in an aqueous phase that contains the analyte. Understanding the extraction efficiency at these contactors through modeling and simulation is important in the development of reprocessing technologies and the optimization of current technologies such as the PUREX process. The outcome of this program will be a liquid-liquid microfluidic flow cell chip with embedded spectroscopic sensors for the analysis of extracted analytes. This device will be useful in the optimization of new fuel reprocessing schemes as well as existing reprocessing processes by providing a microfluidic modeling platform to optimize extraction parameters. The Phase I and Phase II work developed a microfluidic chip design that allows integration of Raman and absorption fiber optic probes and successfully demonstrated the feasibility of using Raman and absorption probes to detect key analytes that partition into the aqueous and organic phases.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Fundamental Studies on the Recovery of Rare Earth Elements from Coal and Coal Byproducts (Final Product Report)

The objective of this project was to collect fundamental information that can be used to develop disruptive physical and chemical separation methods that may be used to extract the rare earth elements (REEs) from coal-based feedstocks in a highly efficient, cost-effective, and environmentally benign manner. To meet the stated objective, a set of interrelated fundamental studies have been conducted. The project has been subdivided into three broad areas of tasks as follows, (1) measurement of surface forces in the thin liquid films (TLFs) of water confined between two macroscopic surfaces to establish the optimal conditions for efficiently collecting the ultrafine particles of rare earth minerals (REMs) present in the coal-based feedstocks using the flotation and/or the hydrophobic-hydrophilic separation process(es), (2) identification of the fundamental mechanisms by which REE ions adsorb and desorb on clay minerals present in coal byproducts, and the characterization of the ion-adsorption clays (IACs) present in U.S. coals, and (3) developing methods of extracting the REEs from the REMs and IACs present in US coal byproducts in a cost-effective and sustainable manner.

01 COAL, LIGNITE, AND PEAT↗