Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elevation trend”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

HDG-1 Experiment Irradiation Monitoring Data Qualification Final Report

SUMMARY The U.S. Department of Energy (DOE) Advanced Reactor Technologies (ART) Graphite Research and Development (GRD) Program is conducting a series of six experiments to quantify the effects of irradiation on nuclear-grade graphite. This report documents the qualification of irradiation monitoring data for the fifth experiment, High Dose Graphite-1 (HDG-1). Qualified monitoring data are required by the ART program to support the design and licensing of the first high-temperature reactor (HTR) nuclear plant. Data are classified as Qualified if they meet the usage requirements described in the experiment planning and quality assurance (QA) documents, Failed if they do not meet those requirements and provide no usable information, or Trend if they do not fully meet all requirements but still provide useful information subject to an assessment of how any deficiencies may affect a particular use of the data. HDG-1 irradiation began with Advanced Test Reactor (ATR) Cycle 168B on August 24, 2020, and concluded after Cycle 173C on January 27, 2025. The HDG-1 capsule was removed from the reactor core twice—during core internal change (CIC) Cycle 170A and powered axial locator mechanism (PALM) Cycle 172A—to prevent overheating of the graphite specimens during high-power PALM cycles. The capsule was therefore irradiated during a total of seven normal ATR cycles: 168B, 169A, 171A, 171B, 173A, 173B, and 173C. Irradiation monitoring data evaluated in this report include thermocouple (TC) temperature, gas flow rate, gas moisture, gas pressure, specimen load, and graphite stack displacement. Temperature. A total of 14,508,065 TC temperature records were captured. Of these, 13,901,785 (95.8%) are Qualified and 606,280 (4.2%) are Failed. The principal source of failed temperature data was the instrument failure of TC-9 (Zone 2) on June 24, 2024, and TC-10 (Zone 1) on July 5, 2024, near the end of Cycle 173A, which resulted in 595,554 Failed readings. An additional 379 missing values and 10,347 slightly negative values from TC-13 during ATR outages are also Failed. Neither TC-9 nor TC-10 was used as a temperature-control TC, and their failures did not compromise capsule condition monitoring. Correlation analysis of all 13 TCs found no evidence of virtual junction formation. Control chart analysis revealed clear downward drift of approximately 80°C for TC-6 (Zone 3) relative to other stable TCs, and possible downward drift of approximately 60°C for TC-13 relative to the Zone 5 control TC (TC-1), though TC-13 remained consistent with the Zone 2 control TC (TC-12). Gas flow. A total of 20,088,090 gas flow rate records were captured. Of these, 19,941,463 (99.3%) are Qualified and 146,627 (0.7%) are Failed due to missing values. All argon, helium, and total gas flow data were within expected ranges throughout the irradiation. Gas moisture. A total of 1,116,005 outlet gas moisture values were captured. Of these, 1,101,421 (98.7%) are Qualified and 14,584 (1.3%) are Failed, comprising 14,556 out-of-range values and 28 missing values. The out-of-range moisture values exceeded 22,000 ppmv for approximately 1 week at the beginning of Cycle 173A, when accumulated moisture evaporated after the capsule was retrieved from water storage during PALM Cycle 172A and reinserted into the east flux trap. Moisture levels returned to below 25 ppmv for the remaining three cycles, and the transient high-moisture event did not affect the integrity of specimen irradiation. Gas pressure. A total of 7,812,035 gas pressure values were captured. Of these, 6,642,048 (85.0%) are Qualified and 1,169,987 (15.0%) outlet pressure values are Failed, comprising 718,537 zero outlet pressure values due to sensor failure from Cycle 168B through Cycle 171B, 54,550 missing values, and 396,900 too-low outlet pressure values, ranging from 1.1 to 1.6 psia after sensor replacement during Cycle 173A. Load. A total of 6,696,030 load values were captured. Of these, 6,694,580 (99.98%) are Qualified and 1,450 (0.02%) are Failed due to missing values. Applied loads to the six specimen stacks were stable throughout the irradiation. Stack displacement. A total of 6,696,030 displacement values were captured. Of these, 5,713,297 (85.32%) are Qualified and 3,781 (0.06%) are Failed due to missing values. Stack displacement increased consistently throughout the irradiation, reaching approximately 3.08 in. for Channels 5 and 6 by the end of irradiation. 978,952 (14.62%) substantially elevated displacements observed for Channel 6 beginning in Cycle 171A and for Channel 5 beginning in Cycle 173A are assigned Trend status. Raising pressure. A total of 1,115,999 raising pressure values were captured. Of these, 1,115,430 (99.95%) are Qualified and 569 (0.05%) are Failed due to missing values. Ram pressure. A total of 6,696,030 ram pressure values were captured. Of these, 6,692,249 (99.95%) are Qualified and 3,484 (0.05%) are Failed due to missing values. Stack raising was perf

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2004

Elevation Changes of Ice Caps in the Canadian Arctic Archipelago

Precise repeat airborne laser surveys were conducted over the major ice caps in the Canadian Arctic Archipelago in the spring of 1995 and 2000 in order to measure elevation changes in the region. Our measurements reveal thinning at lower elevations (below 1600 m) on most of the ice caps and glaciers, but either very little change or thickening at higher elevations in the ice cap accumulation zones. Recent increases in precipitation in the area can account for the slight thickening where it was observed, but not for the thinning at lower elevations. For the northern ice caps on the Queen Elizabeth Islands, thinning was generally less than 0.5 m/yr , which is consistent with what would be expected from the warm temperature anomalies in the region for the 5-year period between surveys and appears to be a continuation of a trend that began in the mid 1980s. Further south, however, on the Barnes and Penny ice caps on Baffin Island, this thinning was much more pronounced at over 1 m/yr in the lower elevations. Here temperature anomalies were very small, and the thinning at low elevations far exceeds any associated enhanced ablation. The observations on Barnes, and perhaps Penny are consistent with the idea that the observed thinning is part of a much longer term deglaciation, as has been previously suggested for Barnes Ice Cap. Based on the regional relationships between elevation and elevation-change in our data, the 1995-2000 mass balance for the region is estimated to be 25 cu km/yr of ice, which corresponds to a sea level increase of 0.064 mm/ yr . This places it among the more significant sources of eustatic sea level rise, though not as substantial as Greenland ice sheet, Alaskan glaciers, or the Patagonian ice fields.

Abdalati, W.↗
DOE OSTI2020

Contrasting growth responses of Qilian juniper ( Sabina przewalskii ) and Qinghai spruce ( Picea crassifolia ) to CO2 fertilization despite common water-use efficiency increases at the northeastern Qinghai–Tibetan plateau

Abstract Rising atmospheric carbon dioxide (CO2) may enhance tree growth and mitigate drought impacts through CO2 fertilization. However, multiple studies globally have found that rising CO2 has not translated into greater tree growth despite increases in intrinsic water-use efficiency (iWUE). The underlying mechanism discriminating between these two general responses to CO2 fertilization remains unclear. We used two species with contrasting stomatal regulation, the relatively anisohydric Qilian juniper (Sabina przewalskii) and the relatively isohydric Qinghai spruce (Picea crassifolia), to investigate the long-term tree growth and iWUE responses to climate change and elevated CO2 using tree ring widths and the associated cellulose stable carbon isotope ratios (δ13C). We observed a contrasting growth trend of juniper and spruce with juniper growth increasing while the spruce growth declined. The iWUE of both species increased significantly and with similar amplitude throughout the trees’ lifespan, though the relatively anisohydric juniper had higher iWUE than the relatively isohydric spruce throughout the period. Additionally, with rising CO2, the anisohydric juniper became less sensitive to drought, while the relatively isohydric spruce became more sensitive to drought. We hypothesized that rising CO2 benefits relatively anisohydric species more than relatively isohydric species due to greater opportunity to acquire carbon through photosynthesis despite warming and droughts. Our findings suggest the CO2 fertilization effect depends on the isohydric degree, which could be considered in future terrestrial ecosystem models.

Wang, Wenzhi↗
DOE OSTI2025

Adaptation of Wallace's approach to the specific heat of elemental solids with significant intrinsic anharmonicity, particularly the light actinide metals

The quasiharmonic approximation is the most common method for modeling the specific heat of solids; however, it fails to capture the effects of intrinsic anharmonicity. In this study, we introduce the “elastic softening approximation,” an alternative approach to modeling intrinsic anharmonic effects on thermodynamic quantities, which is grounded in Wallace's thermodynamic framework that tracks entropy changes resulting from the continuous change (e.g., softening) of phonons as a function of temperature. A key finding of our study is a correlation between Poisson's ratio and the differential rate of phonon softening at finite frequencies, compared to lower frequencies relevant to elastic moduli measurements. We observe that elemental solids such as α -Be, diamond, Al, Cu, In, W, Au, and Pb, which span a wide range of Poisson's ratios and exhibit varying degrees of intrinsic anharmonicity, consistently follow this trend. When applied to α -U, α -Pu, and δ -Pu, our method reveals unusually large anharmonic phonon contributions at elevated temperatures across all three light actinide metals. These findings are attributed to the unique combination of enhanced covalency and softer elastic moduli inherent in the actinides, potentially influenced by their 5 f -electron bonding. Published by the American Physical Society 2025

36 MATERIALS SCIENCE↗
DOE OSTI2026

Permafrost Thaw, Uneven Subsidence and Projected Drying of Ice-wedge Polygon Tundra: Modeling Archive

This dataset is a model archive of the paper Permafrost Thaw, Uneven Subsidence and Projected Drying of Ice-wedge Polygon Tundra (in prep) to support a modeling study investigating how projected increases in Arctic temperature and precipitation will jointly influence hydrologic conditions in ice-rich tundra landscapes. With this dataset, this study is to address the research question: Will Arctic tundra landscapes become wetter or drier with increasing precipitation and temperature in the future when thaw-induced ground subsidence and associated microtopographic evolution are represented? The simulations focus on ice-wedge polygon tundra, a widespread form of ice-rich permafrost terrain that is highly sensitive to thaw-driven landscape change. This dataset contains model input and output data for four study watersheds in Alaska: Anaktuvuk, Utqiagvik (formerly Barrow), Brooks Foothills, and Prudhoe Bay. Simulations were performed using the Advanced Terrestrial Simulator (ATS, v1.5), a physics-rich integrated surface–subsurface hydrologic model. For each watershed, ten modeling cases were performed representing two landscape evolution conditions (with subsidence and without subsidence) combined with five climate forcing scenarios derived from Shared Socioeconomic Pathways (SSP5, SSP5 with precipitation trend, SSP2, SSP2 with precipitation trend, and SSP2 with double precipitation trend). Particularly, for each watershed under the forcing SSP2 with precipitation trend, there are two additional simulations considering spatially heterogeneous subsidence distributions: one assumes randomly distributed scaling and the other includes elevation dependent distribution scaling. These simulations span 1980–2099 and include spin-up runs (1980–2009) followed by transient projections (2010–2099). To facilitate reproducibility of simulations, all datasets are organized by watershed. For each study watershed, the dataset contains: (1) Pre-partitioned mesh files for 32-core modeling (.par.32.XX), located in EACH_WATERSHED/mesh/basin; and also a non-partitioned mesh file (.exo) located in EACH_WATERSHED/mesh; (2) Climate forcings corresponding to the five SSP scenarios (.h5), located in EACH_WATERSHED/data; (3) Final states (.h5) from column spin-up modeling used to initialize historical watershed-scale spin-up runs from 1980 to 2009, located in EACH_WATERSHED/PreSpinupHistorical; (4) Final states (.h5) of historical watershed-scale spin-up runs from 1980 to 2009 used to initialize projection runs, located in EACH_WATERSHED/Spinup_daymetERA5; (5) ATS modeling input files (.xml), located in EACH_WATERSHED/EACH_SIMULATION_SCENARIO/inputfiles; (6) ATS modeling output files (.dat), located in in EACH_WATERSHED/EACH_SIMULATION_SCENARIO/combined_obs; (7) For the Brooks Foothills watershed, additional spatial model outputs are provided (.h5) for selected years (2033 and 2093) used to generate spatial figures in this study, located in Brooksfoothills/EACH_SIMULATION_SCENARIO/results-WITH/WITHOUT_SUBSIDENCE-year2033/2093. All data files with suffix .h5 can be accessible through Python h5py, and all data files with suffix of .dat can be imported by Python pandas. Mesh file with .exo can be visualized through Paraview or read by Python netCDF. The Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) project is a research effort to reduce uncertainty in the Department of Energy’s Energy Exascale Earth System Model (E3SM) by developing a predictive understanding of Arctic tundra ecosystems underlain by permafrost and to quantify feedbacks from the Arctic tundra to the Earth system. NGEE Arctic is supported by the Department of Energy's Office of Biological and Environmental Research. Over Phases 1–3, observations made by the NGEE Arctic team across a gradient of permafrost landscapes in Arctic Alaska improved the representation of tundra processes in the land surface component of E3SM (the E3SM Land Model, ELM). Model improvements emphasized unique aspects of permafrost environments and explored reductions in model complexity while retaining predictive power. The Arctic-informed ELM developed by NGEE Arctic has been used to make novel predictions on processes ranging from permafrost thaw to soil biogeochemical cycling to Earth system feedbacks associated with the unique characteristics of tundra plants. In Phase 4, the NGEE Arctic team is evaluating our new predictive understanding under novel conditions across the Arctic domain. In collaboration with partners at long-term pan-Arctic research sites we are examining whether an Arctic-informed ELM can faithfully simulate interactions among surface and subsurface processes at site, regional, and pan-Arctic scales. In turn, we are using variety of tools to dynamically extend and evaluate ELM inference, with an emphasis on data synthesis and pan-Arctic model evaluation, reintegration of code with an evolving E3SM, scaling across heterogeneous Arctic landscapes, and the appropriate representation of the impacts of increasingly frequent Arctic disturbances.

EARTH SCIENCE > ATMOSPHERE > PRECIPITATION↗
DOE OSTI2020

Fiberboard Properties and Degradation Rates for Storage of 9975 Shipping Package in KAC (2020 Status Report)

Savannah River Site (SRS) stores plutonium materials within model 9975 shipping packages in the K-Area Complex (KAC). The 9975 shipping package consists of a 35 gallon stainless steel drum, Celotex fiberboard insulation, lead shield, and primary and secondary containment vessels. The 9975 shipping package design, performance, and analysis for safe transport of radioactive material are described in the Safety Analysis Report for Packaging (SARP). Celotex fiberboard provides three safety functions: thermal insulation to limit internal temperature during a fire, criticality control, and resistance to package crushing. The fiberboard material must retain its dimensions and density within certain ranges to provide the required impact resistance, criticality control, and fire resistance. The SRS Surveillance Program monitors material performance to establish a basis for service life and ensures the continued integrity of 9975 packages. Fiberboard samples, taken from multiple fiberboard assemblies fabricated from cane and softwood fiberboard, have been conditioning in elevated temperature environments since 2005. The samples are periodically examined to monitor thermal, mechanical, and physical properties, and assess degradation trends. Fiberboard properties of interest that are evaluated to demonstrate acceptable long-term performance include dimensional stability, density, compressive strength, thermal conductivity, and specific heat capacity. Duplicate samples from multiple package sources have been tested to identify the range of variability in fiberboard properties and degradation rates. Baseline and long-term testing of fiberboard material properties have been reported previously; reference 6 summarized experimental results of cane and softwood fiberboard through May 2019 and presented degradation models for the measured properties. This report presents the cumulative data collected through June 2020 and the corresponding updated aging models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

The Influence of Temperature Inversion on the Vertical Distribution of Aerosols

Temperature inversion plays an important role in the accumulation and diffusion of aerosols. In this study, the relationship between temperature inversion and the vertical distribution of aerosols is investigated based on Raman lidar observations taken from January 2010 to September 2015 at the Atmospheric Radiation Measurement site in the Southern Great Plains, USA. First, the diurnal and seasonal variations of the surface-based inversion (SBI) and elevated temperature inversion (EI) are investigated. The results indicate that the occurrence frequency of SBI and EI have different seasonal trends. SBI has the highest frequency in summer, while EI has the highest frequency in winter. The diurnal variation of SBI is obvious, with a higher frequency in nighttime and a lower frequency in daytime. The inversion intensity (ΔT) and inversion depth (ΔZ) of SBI and EI have consistent diurnal and seasonal trends. The effects of SBI and EI on the vertical distribution of aerosols are then analyzed. The mean aerosol optical depth (AOD) below the SBI height shows a clear seasonal variation, which is consistent with the seasonal trends of ΔT and ΔZ. This phenomenon also occurs on the AOD below EI top height. The sensitivity analysis shows that the mean AOD below SBI height or EI top height increases with an increase of the ΔT and ΔZ of SBI (EI). It indicates that ΔT and ΔZ are the key factors affecting the vertical distribution of aerosols. In addition, the variation of AOD below and above EI top height is opposite to that of AOD below and above EI bottom height under different ΔT and ΔZ conditions. The correlation coefficients between ΔT (ΔZ) of EI with AOD in EI were 0.62 (0.65). These results indicate that the space between EI bottom height and EI top height can store aerosols. The larger the ΔZ of EI, the more aerosols are stored. These findings contribute to our understanding of the effect of temperature inversion on the vertical distribution of aerosols.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1976

Geared-elevator flutter study

The paper describes an experimental and analytical study of the transonic flutter characteristics of an empennage flutter model having an all-movable horizontal tail with a geared elevator. Two configurations were flutter tested: one with a geared elevator and one with a locked elevator with the model cantilever-mounted on a sting in the wind tunnel. The geared-elevator configuration fluttered experimentally at about 20% higher dynamic pressures than the locked-elevator configuration. The experimental flutter boundary was nearly flat at transonic speeds for both configurations. It was found that an analysis which treated the elevator as a discrete surface predicted flutter dynamic pressure levels better than analyses which treated the stabilizer and elevator as a warped surface. Warped-surface methods, however, predicted more closely the experimental flutter frequencies and Mach number trends.

Ruhlin, C. L.↗
NASA NTRS2015

An Enhanced Seasonal Transition that Intensified Summer Drought in the Central U.S.

Precipitation in the central U.S. decreases by about 25% during the seasonal transition from June to July, and this precipitation decrease has been observed to have intensified since 1979. Such an intensification could enhance future spring drought occurrences such as was the case in the 2012 "flash drought" in the Midwestern U.S., where conditions evolved quickly from being abnormally dry to exceptionally dry within a mere month from June to July. In this study, various atmospheric and land reanalysis datasets were analyzed to examine the trend calculated from 1979 to 2012 in the June-to-July seasonal transition. It was found that the change in precipitation deficit was accompanied by increased downward shortwave radiation flux and tropospheric subsidence, enhanced evaporative fraction, as well as an elevated planetary boundary layer height. The change in the tropospheric circulation encompassed an anomalous ridge over the western U.S. and a trough on either side; this wave-form circulation pattern is known to induce dry conditions in the central U.S. Possibly, the trends in the June-to-July seasonal shifts in precipitation, drought severity and tropospheric circulation intensified the 2012 "flash drought" in timing and extent. The knowledge of the trends allows one to anticipate the evolution of spring onset of drought into the summer.

Drought↗
DOE OSTI2025

Quantifying precursors to void nucleation and coalescence in aluminum

Ductile rupture is a common failure mode for engineering alloys. It is generally comprised of three mechanisms: void nucleation at secondary particles, void growth, and coalescence of voids. Conventional models for ductile rupture have limited precision for predicting macroscopic failure. This is partially because they have been corroborated using ex-situ observations of these three mechanisms and calibrated by macroscopic strain or stress metrics. In this study, in-situ high-energy X-ray characterization was conducted to correlate sites of void nucleation via particle cracking and sites of void growth with grain-scale metrics. Here it is shown that particle cracking is not predicated by elevated stress metrics, which disagrees with classical models. Instead, particle cracking tended to occur for the largest, least spherical particles. This trend persisted on the aggregate-scale and within individual neighborhoods around particles. Furthermore, an Eshelby analysis illuminated a statistically significant increase in maximum principal stress within a cracked particle, compared to an uncracked particle. In-situ observations also revealed two separate examples of intragranular void growth comprised of flat, crack-like features that grew showing alignment with slip systems of the highest resolved shear stress. Post-mortem fractography revealed a secondary population of dimples on these crack-like features, implying that void sheeting may be occurring during this crack-like void growth. Furthermore, these in-situ observations imply that classical models for void growth, that assume a homogenous medium, should be extended to account for the anisotropic grain-level behavior to correctly capture distinct features of void nucleation and growth.

Al-2219↗
DOE OSTI2026

First-principles investigation of structure-property relationships in stable and metastable MXenes

Understanding the structure–property relationships in layered transition-metal carbides or nitrides, known as MXenes, is of critical importance for their rational design, synthesis, and application. However, the vast chemical and structural diversity of MXenes, stemming from their wide range of M and X elements, surface terminations, and different atomic coordination environments, makes it challenging to clearly understand these structure–property relationships. Here, in this work, we perform first-principles density functional theory (DFT) calculations and molecular dynamics (MD) simulations to comprehensively investigate the stability and a variety of physical properties of MXenes with different coordination environments. Using Ti- and Mo-based carbide MXenes as model systems, energetic calculations reveal that Ti-based MXenes are most stable in octahedral coordination, whereas Mo-based MXenes preferentially adopt prismatic coordination. This fundamental difference in preferred atomic coordination gives rise to markedly distinct properties between these two systems as a function of the fraction of octahedral and prismatic sites. For instance, the in-plane stiffness of Ti-based MXenes increases as octahedral coordination becomes dominant, but it decreases in the Mo-based MXenes under the same conditions. Additional stability analyses based on mechanical, lattice-dynamical, and temperature-dependent thermodynamic properties demonstrate that many metastable MXenes not only satisfy the strict stability criteria but can also undergo phase transitions among different structures and even become stabilized at elevated temperatures. Although surface terminations, such as F and O atoms, do not alter the energetic ordering or the overall stiffness trends among stable and metastable MXenes, they influence other material properties. For instance, O termination can induce semiconducting behavior in both stable and metastable Ti 2 ⁢CO 2 MXenes. This study significantly advances the fundamental understanding of structure–property relationships in MXenes and provides valuable guidance for developing coordination-based design principles to precisely engineer MXenes with improved properties.

Oyeniran, Noah [University of Alabama, Tuscaloosa,↗
NASA NTRS1982

Mechanical properties of a fiberglass prepreg system at cryogenic and other temperatures

The compressor driving the flow in the National Transonic Facility, which is nearing completion at the Langley Research Center, has 25 fiberglass blades. E-glass cloth with a pre-impregnated epoxy resin has been selected as the material for the fan blades because of its low cost, high damping, and fatigue resistance. A complete characterization is presented of this fan blade fiberglass system at temperatures of 367 K, room temperature, and 89 K. The characterization test results suggest that the material follows the general trends of metals and other glass-reinforced plastics at cryogenic temperatures. A slight diminution in strength was observed at the elevated temperature. The tests included the following: tensile, compression, fatigue, inplane shear, interlaminar shear, thermal expansion, creep, and thermal cycle.

Klich, P. J.↗
NASA NTRS2022

Grand Valley Ecological Forecasting II: Forecasting Trends in Pinyon-Juniper and Sagebrush Habitat Relative to Wildfire, Drought, Beetle Disturbance, and Treatment Impact for Management Planning

Disturbances and landcover change in pinyon-juniper and sagebrush ecosystems are exacerbated by environmental conditions such as variability in climate characteristics. Our DEVELOP team partnered with the National Park Service (NPS) in Colorado National Monument and the Bureau of Land Management (BLM)in McInnis Canyons and Dominguez-Escalante National Conservation Areas to investigate disturbances to land cover. NPS partners were interested in identifying areas at risk of pinyon-juniper die-off or encroachment by invasive species. The BLM partners prioritized identifying areas suitable for fire reduction/prevention treatment. To address these concerns, we forecasted landcover change in the Grand Valley region of Colorado using NASA Earth observation data from Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper (ETM+), Landsat 8 Operational Land Imager (OLI), and Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Terra and Aqua. We collected and analyzed these data in conjunction with Term I of this project. We found that the primary drivers of forecasted landcover change in the study area were aspect and elevation. Our forecasted landcover change maps, created using the Idrisi TerrSet Land Change Modeler, addressed the needs of our partners by showing potential habitat suitability trends, which will inform management planning. Forecasted landcover maps indicated that by 2040, ecosystems within partner management areas will likely see tree encroachment on shrublands.

William Curtiss↗
NASA NTRS2019

A Terrestrial Validation of ICESat Elevation Measurements and Implications for Global Reanalyses

The primary goal of NASA's Ice, Cloud, and land Elevation Satellite (ICESat) mission was to detect centimeter-level changes in global ice sheet elevations at the spatial scale of individual ice streams. Confidence in detecting these small signals requires careful validation over time to characterize the uncertainty and stability of measured elevations. A common validation approach compares altimeter elevations to an independently characterized and stable reference surface. Using a digital elevation model (DEM) from geodetic surveys of one such surface, the salar de Uyuni in Bolivia, we show that ICESat elevations at this location have a 0.0-centimeter bias relative to the WGS84 ellipsoid, 4.0-centimeter (1-sigma) uncertainty overall, and 1.8-centimeter uncertainty under ideal conditions over short (50 kilometer) profiles. We observe no elevation bias between ascending and descending orbits, but we do find that elevations measured immediately after transitions from low to high surface albedo may be negatively biased. Previous studies have reported intercampaign biases (ICBs) between various ICESat observation campaigns, but we find no statistically significant ICBs or ICB trends in our data. We do find a previously unreported 3.1-centimeter bias between ICESat's Laser 2 and Laser 3, and we find even larger interlaser biases in reanalyzed data from other studies. For an altimeter with an exact repeat orbit like ICESat, we also demonstrate that validation results with respect to averaged elevation profiles along a single ground track are comparable to results obtained using reference elevations from an in situ survey.

Laser Ranging↗
DOE OSTI2021

Do Remote Camera Arrangements and Image Capture Settings Improve Individual Identification of Golden Eagles?

Individual identification of animals from camera traps has become an important task in wildlife research, but camera deployment methods often do not facilitate this important undertaking. Identification of individual golden eagles (Aquila chrysaetos) is possible using uniquely marked rectrices, but no studies have explored methods to maximize the rate of individual identification from camera images. Furthermore, our objectives were to assess whether different camera heights (1 m vs. 3 m), image capture settings (one image after a 1-min delay vs. burst of 5 images after a 30 sec delay), and arrangements relative to bait (dorsally vs. ventrally aimed) affected views of rectrices on golden eagles and our ability to identify individuals. We conducted our study from 15 December 2016 to 3 March 2017 on the Savannah River Site, South Carolina. First, we developed a scoring system based on views of rectrices and used a linear mixed-effects model to compare image scores among different camera arrangements and image settings. Next, after identifying individual eagles, we used generalized linear mixed-effects models to compare total individual eagle detections, total days an individual was detected, and probability of obtaining an unknown individual identification among camera arrangements and settings. Overall, we scored a total of 27,499 images, with 8,083 providing views of marked rectrices that allowed identification of 18 individual eagles. Average image scores and proportion of images suitable for individual identification were higher from elevated (3 m) camera arrangements than standard arrangements (1 m) across sites. Regardless of camera height, faster frequency of image capture provided more images that could be used to identify individuals and the most trap days per individual. Researchers and managers should consider deploying elevated cameras traps with faster frequency of image capture to improve data quality and potential for analysis of golden eagle populations and trends across the species’ range.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1976

The Sagatu Ridge dike swarm, Ethiopian rift margin

A swarm of dikes forms the core of the Sagatu Ridge, a 70-km-long topographic feature elevated to more than 4000 m above sea level and 1500 m above the level of the Eastern (Somalian) plateau. The ridge trends NNE and lies about 50 km east of the northeasterly trending rift-valley margin. Intrusion of the dikes and buildup of the flood-lava pile, largely hawaiitic but with trachyte preponderant in the final stages, occurred during the late Pliocene-early Pleistocene and may have been contemporaneous with downwarping of the protorift trough to the west. The ensuing faulting that formed the present rift margin, however, bypassed the ridge. The peculiar situation and orientation of the Sagatu Ridge, and its temporary existence as a line of crustal extension and voluminous magmatism, are considered related to a powerful structural control by a major line of Precambrian crustal weakness, well exposed further south. Transverse rift structures of unknown type appear to have limited the development of the ridge to the north and south.

Mohr, P. A.↗
NASA NTRS1993

Temporal changes in the geographic distribution, elevation, and potential origin of the Martian outflow channels

Observational evidence of outflow channel activity on Mars suggests that water was abundant in the planet's early crust. However, with the decline in the planet's internal heat flow, a freezing front developed within the regolith that propagated downward with time and acted as a thermodynamic sink for crustal H2O. One result of this thermal evolution is that, if the initial inventory of water on Mars was small, the cryosphere may have grown to the point where all the available water was taken up as ground ice. Alternatively, if the inventory of H2O exceeds the current pore volume of the cryosphere, then Mars has always possessed extensive bodies of subpermafrost groundwater. We have investigated the relative age, geographic distribution, elevation, and geologic setting of the outflow channels in an effort to accomplish the following: (1) identify possible modes of origin and evolutionary trends in their formation; (2) gain evidence regarding the duration and spatial distribution of groundwater in the crust; and (3) better constraint estimates of the planetary inventory of H2O.

Tribe, S.↗
NASA NTRS2017

Washboard Terrain on Pluto

Washboard texture or patterning consists of fields of parallel to sub-parallel ridges typically spaced ~1-2 km crest to crest and a few 100 m in amplitude (Fig. 4a in Moore et al., 2016, Science, 351, 1284-1293). For the most part, underlying topography can be easily discerned. We will refer to discrete, well-bounded patches of these landforms as Washboard Terrain (WT). WT is observed to occur along the rim, and just beyond the rim, of Sputnik basin from the West to NNW. Where it is seen in high-resolution data, it has clearly defined limits, beyond which it would be able to be seen if it were there. WT doesn't occur at very low latitudes or very high latitudes (ranging from 22degN to 62degN). WT seems to occur most conspicuously on relatively level, gently sloping terrain. It is restricted to elevations between approximately 2 km to less than +1.5 km (i.e. not at high elevations). The most noticeable regional aspect of the area in which WT occurs is the sinuous valley network, which is suspected to have been formed, or at least substantially modified, by glaciation. WT also appears to occur mainly on an intermediate-albedo reddish material, where seen in enhanced color data. Where it occurs in level terrain, WT tends to trend ENE - there doesn't seem to be a strong local control of its orientation in response to valley drainage directions. WT can display a greater range of orientations where it occurs in higher-relief (not higher elevation) settings such as spurs. WT appears superposed on very ancient landscapes, but is itself cratered locally by clusters of small (approximately 1-3 km) craters, which may be secondaries. This implies that WT may be intermediate in age. Of several working hypotheses, we currently provisionally favor that WT may be akin to terrestrial recessional moraines (or de Geer moraines) associated with the retreat of a higher stand of N2 glaciation that once overfilled Sputnik basin. These putative moraine features may owe their spacing to superseasonal retreat on Milankovitch timescales of approximately 1 Ma. If this hypothesis has validity, then perhaps the intermediate-albedo reddish material may be akin to ground moraine deposits.

Moore, Jeffrey M.↗