SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The SC5 rapid scan particle spectrometer, operating on the SCATHA satellite, is discussed. SC5 in-orbit operation and reduction of electrostatic analyzer (ESA) spectra are addressed. ESA data summaries from ion and electron gun operations are explained. Data from gun operations show how the satellite potential responds and provide information on the various time constants involved.
The Low Altitude Plasma Instrument on the Dynamics Explorer-B spacecraft provides high resolution velocity space measurements of positive ions and electrons from 5 eV to 32 keV and a monitor of electrons with energies above 35 keV. It consists of an array of 15 parabolic electrostatic analyzers spanning 180 deg in angle and two Geiger-Mueller counters mounted on a one-degree of freedom scan platform. The platform is controlled by a magnetometer that allows placement of the array to selected angles with respect to the magnetic field. Each parabolic analyzer simultaneously measures electrons and positive ions. The temporal resolution and energy range of the measurements and the detector complement to be sampled are programmable by ground command
Ion acceleration is a well known phenomenon at both interplanetary shocks, while there have been only a few reports concerning an acceleration of electrons at interplanetary shocks. The considered investigation reports that electron acceleration occurs at many shocks. The instrumentation used is discussed, taking into account the ISEE 3 (International Sun Earth Explorer) spacecraft and the electrostatic analyzer employed for the measurement of electrons. Changes in the electron distribution function caused by shocks are found to be quite varied. Some events show a simple step to a higher flux level, some show fluctuations as the flux rises, and some have one or more pulses at the time of the shock. Attention is given to data obtained on July 26, 1979, December 25, 1978, and November 12, 1978. A calculation of shock geometries is also reported.
Two Fast Ion Mass Spectrometers (FIMS A and FIMS B) were developed. The design, development, construction, calibration, integration, and flight of these instruments, along with early results from the data analysis efforts are summarized. A medium energy ion mass spectrometer that covers mass velocity space with significantly higher time resolution, improved mass resolution, (particularly for heavier ions), and wider energy range than existing instruments had achieved was completed. The initial design consisted of a dual channel cylindrical electrostatic analyzer followed by a dual channel cylindrical velocity filter. The gain versus count rate characteristics of the high current channel electron multipliers (CEM's), which were chosen for ion detection, revealed a systematic behavior that can be used as a criterion for selection of CEM's for long counting lifetimes.
An instrument which can rapidly measure plasma particle distribution functions has been developed based upon recent innovations in electrostatic analyzer design and position sensitive particle detection. The new analyzer uses a quadrispherical geometry, but has a completely uniform 360 deg fan-shaped field of view. The polar angular distribution of entering particles is spatially imaged onto a position sensitive detector at the annular exit aperture after a deflection through 90 deg. Several methods of position sensitive detection have been successfully used in conjunction with this analyzer. The simplest is individual channel multipliers spaced around the annular exit. Microchannel plate electron multipliers permit greater position resolution to be obtained, and a detector using microchannel plates followed by a resistive anode image converter obtains angular resolution of about one degree, i.e., 360 individual angle pixels. Instruments of this type were flown on a sounding rocket in early 1982 and will be included on the Giotto comet mission and the AMPTE ion release module (IRM).
A low energy electron beam magnetometer utilizes near-monoenergetic electrons thereby reducing errors due to electron energy spread and electron nonuniform angular distribution. In a first embodiment, atoms in an atomic beam of an inert gas are excited to a Rydberg state and then electrons of near zero energy are detached from the Rydberg atoms. The near zero energy electrons are then accelerated by an electric field V(acc) to form the electron beam. In a second embodiment, a filament emits electrons into an electrostatic analyzer which selects electrons at a predetermined energy level within a very narrow range. These selected electrons make up the electron beam that is subjected to the magnetic field being measured.
The International Solar Polar Mission (ISPM) Solar-Wind Ion Composition Spectrometer which determines elemental and ionic-charge composition, and the temperatures and mean speeds of all major solar-wind ions, from H through Fe, at solar wind speeds ranging from 145 km/sec (protons) to 1352 km/sec (Fe+8) is described. The instrument, which covers an energy per charge range from 110 eV/q to 66.7 keV/q in 13 min, combines an electrostatic analyzer with postacceleration, followed by a time-of-flight and energy measurement. Conditions and processes in the region of the corona where the solar wind is accelerated; location of the source regions of the solar wind in the corona; coronal heating processes; the extent and causes of variations in the composition of the solar atmosphere; plasma processes in the solar wind; acceleration of energetic particles in the solar wind; the thermalization and acceleration of interstellar ions in the solar wind, and their composition; and the composition and behavior of the plasma in the Jovian magnetosphere are studied.
The SCATHA and the ATS-5 and 6 spacecraft provided insights to the problem of spacecraft charging at geosychronous altitudes. Reduction of the levels of both absolute and differential charging was indicated, by the emission of low energy neutral plasma. It is appropriate to complete the transition from experimental results to the development of a system that will sense the state-of-charge of a spacecraft, and, when a predetermined threshold is reached, will respond automatically to reduce it. A development program was initiated utilizing sensors comparable to the proton electrostatic analyzer, the surface potential monitor, and the transient pulse monitor that flew in SCATHA, and combine these outputs through a microprocessor controller to operate a rapid-start, low energy plasma source.
Energetic particle data from electrostatic analyzers aboard the S3-3 satellite indicative of a downward parallel electric field at low altitudes are presented to argue for a causal connection between downward parallel electric fields and ion heating. The data include observations of upward field-aligned electron beams in regions where precipitating electron fluxes are suppressed. Evidence of downward acceleration of ions and locally mirroring ion conics is also presented. It is argued that the presence of a downward electric field may have important consequences for ion conic heating and might in fact be required for the observed heating of ions to several hundred electron volts.
The high altitude plasma instrument, i.e., five electrostatic analyzers, on board the DE 1 satellite obtained data on electron conical distributions during two nightside auroral zone passes and one polar cap pass. The southern orbit apogee was 675 km, the northern, 24,000 km. Electrons confined to the outside of the loss cone were the highest energy particles detected. The upward integrated flux was greater than the downward flux, indicating the presence of a heating process perpendicular to the geomagnetic field.
Described are the design, construction and test results of a Low Energy Electron Magnetometer (LEEM). The electron source is a commercial electron gun capable of providing several microamperes of electron beam. These electrons, after acceleration through a selected potential difference of 100-300 volts, are sent through two 30 degree second-order focussing parallel plate electrostatic analyzers. The first analyzer acts as a monochromator located in the field-free space. It is capable of providing energy resolution of better than 10 to the -3 power. The second analyzer, located in the test field region, acts as the detector for electrons deflected by the test field. The entire magnetometer system is expected to have a resolution of 1 part in 1000 or better.
The present study is concerned with an evaluation of some of the plasma and field processes by which the magnetospheric boundary layer acts as a magnetohydrodynamic (HD) dynamo. An analysis is conducted of 18 crossings of the dayside magnetopause and boundary layer, taking into account data provided by the quadrispherical electrostatic analyzers (Lepedea) of the International Sun-Earth Explorer (ISEE) spacecraft. These instruments sample ion and electron velocity distributions in three dimensions. Attenion is given to aspects of data presentation, magnetopause identification, details regarding the magnetopause crossings, cross-field plasma flow, comparisons of magnetosheath and boundary layer plasma flow, and six conclusions.
In an investigation conducted by Olsen (1982) on the basis of particle data taken with an electrostatic analyzer, it was found that a cold plasma population with a density between 10 and 100 per cu cm appeared suddenly when the satellite was eclipsed, but was hidden in sunlight. The present paper has the objective to show further measurements of ordinarily 'hidden' ion populations, in order to resolve some of the questions raised in connection with the Scatha satellite data reported by Olsen. It is found that the retarding ion mass spectrometer (RIMS) detector is capable of measuring the core of the plasma distribution in sunlight and eclipse, though the task is more easily done in eclipse. There are, however, limitations concerning the ability of the detector to measure all the plasma, all the time. It is, therefore, pointed out that continuous effective measurements of the 'hidden' ion population of the magnetosphere still awaits satellites with effective means of potential control.
Participation of U.S. scientists on the COPERNIC (COmplete Positive ions, Electrons and Ram Negative Ion measurements near Comet Halley) plasma experiment on the Giotto mission is described. The experiment consisted of two detectors: the EESA (electron electrostatic analyzer) which provided three-dimensional measurements of the distribution of electrons from 10 eV to 30 keV, and the PICCA (positive ion cluster composition analyzer) which provided mass analysis of positively charged cold cometary ions from mass 10 to 210 amu. In addition, a small 3 deg wide sector of the EESA looking in the ram direction was devoted to the detection of negatively charged cold cometary ions. Both detectors operated perfectly up to near closest approach (approx. 600 km) to Halley, but impacts of dust particles and neutral gas on the spacecraft contaminated parts of the data during the last few minutes. Although no flight hardware was fabricated in the U.S., The U.S. made very significant contributions to the hardware design, ground support equipment (GSE) design and fabrication, and flight and data reduction software required for the experiment, and also participated fully in the data reduction and analysis, and theoretical modeling and interpretation. Cometary data analysis is presented.
Data obtained from the electrostatic analyzers aboard the Pioneer 10 and 11 spacecraft and from the Faraday cup aboard Voyager 2 were used to study spatial gradients in the distant solar wind. Prior to mid-1985, both spacecraft observed nearly identical solar wind structures. After day 150 of 1985, the velocity structure at Voyager 2 became flatter, and the Voyager 2 velocities were smaller than those observed by Pioneer 11. It is suggested that these changes in the solar wind at low latitudes may be related to a change which occurred in the coronal hole structure in early 1985.
By combining a toroidal electrostatic analyzer with a novel cylindrically symmetric isochronous time-of-flight mass spectrometer, an instrument was developed that simultaneously determines the three-dimensional distribution function of ions and differentiates species. The ion mass is determined to high resolution (M/Delta-M greater than 50) from the time of flight within a harmonic field configuration defined by hyperboloid equipotential surfaces. A second conventional time-of-flight channel makes use of particles leaving the thin entrance foil as neutrals. An additional solid state detector in which the neutrals are stopped allows the total energy and thereby the ionic charge of the incident ions to be determined as well. Information from the neutral and the ion channels can be combined to determine the total mass of an incident molecular ion and the mass of one atomic fragment.
Instruments on the SCEX 3 rocket payload were used to study charging during electron beam emissions. The data show that electrostatic analyzers can be used to measure vehicle charging and direct beam return currents in dense plasma conditions. The data also show return current dependencies on pitch angle, beam current and beam energy. It is found that if the proper care is taken, ESAs can be used to detect charging on vehicles in low altitude orbits which are contaminated with high levels of outgassing and in dense plasma regimes. These results are particularly important for the TSS-1 electrodynamic tether program where ESAs are being used to determine Shuttle charging levels during tether employment and to look for high fluxes of directly returning electrons during electron generator operations to balance the Shuttle charging.
The Solar Wind Ion Composition Spectrometer (SWICS) on Ulysses is designed to determine uniquely the elemental and ionic-charge composition, and the temperatures and mean speeds of all major solar-wind ions, from H through Fe, at solar wind speeds ranging from 175 km/s (protons) to 1280 km/s (Fe(8+)). The instrument, which covers an energy per charge range from 0.16 to 59.6 keV/e in about 13 min, combines an electrostatic analyzer with postacceleration, followed by a time-of-flight and energy measurement. The measurements made by SWICS will have an impact on many areas of solar and heliospheric physics, in particular providing essential and unique information on: (1) conditions and processes in the region of the corona where the solar wind is accelerated; (2) the location of the source regions of the solar wind in the corona; (3) coronal heating processes; (4) the extent and causes of variations in the composition of the solar atmosphere; (5) plasma processes in the solar wind; (6) the acceleration of energetic particles in the solar wind; (7) the thermalization and acceleration of interstellar ions in the solar wind, and their composition; and (8) the composition, charge states, and behavior of the plasma in various regions of the Jovian magnetosphere.