Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drag estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Roughness of Weddell Sea ice and estimates of the air-ice drag coefficient

Snow surface, ice surface, and ice underside roughness computed from 47 surface elevation profiles collected during a transect of the Weddell Sea are reported. Roughness spectra for all three surfaces and for both deformed and undeformed ice roll off roughly as k exp -1 when the wavenumber k is between 0.1 and 3 rad/m. The snow surface and underside spectra roll off somewhat faster than k exp -1, and the ice surface spectra roll off somewhat slower than k exp -1. It is argued that the excess spectral intensity at high wavenumbers in the Antarctic ice surface spectra results from the small-scale roughness that the ice sheet had on consolidation. The snow surface spectra are used to compute a roughness scale that parameterizes the air-ice momentum coupling and makes it possible to estimate the neutral stability drag coefficient referenced to a height of 10 m, C sub DN10. Typical C sub DN10 values are 1.1-1.4 x 10 exp -3 over undeformed ice and 1.3-1.8 x 10 exp -3 over deformed ice.

Andreas, Edgar L.↗
NASA NTRS1939

The Effects of Some Surface Irregularities on Wing Drag

The N.A.C.A. has conducted tests to provide more complete data than were previously available for estimating the effects of common surface irregularities on wing drag. The irregularities investigated included: brazier-head and countersunk rivets, spot welds, several types of sheet-metal joints, and surface roughness. Tests were also conducted to determine the over-all effect of manufacturing irregularities incidental to riveted aluminum alloy and to spot-welded stainless-steel construction. The tests were made in the 8-foot high speed wind tunnel at Reynolds Numbers up to 18,000,000. The results show that any of the surface irregularities investigated may increase wing drag enough to have important adverse effects on high-speed performance and economy. A method of estimating increases in wing drag caused by brazier-head rivets and lapped joints under conditions outside the range of the tests is suggested. Estimated drag increases due to rivets and lapped joints under conditions outside the range of the tests is suggested. Estimated drag increases due to rivets and lapped joints on a wing of 20-foot chord flying at 250 miles per hour are shown.

Drag, Manley↗
NASA NTRS2017

Atmospheric Form Drag Coefficients Over Arctic Sea Ice Using Remotely Sensed Ice Topography Data, Spring 2009-2015

Sea ice topography significantly impacts turbulent energy/momentum exchange, e.g., atmospheric (wind) drag, over Arctic sea ice. Unfortunately, observational estimates of this contribution to atmospheric drag variability are spatially and temporally limited. Here we present new estimates of the neutral atmospheric form drag coefficient over Arctic sea ice in early spring, using high-resolution Airborne Topographic Mapper elevation data from NASA's Operation IceBridge mission. We utilize a new three-dimensional ice topography data set and combine this with an existing parameterization scheme linking surface feature height and spacing to form drag. To be consistent with previous studies investigating form drag, we compare these results with those produced using a new linear profiling topography data set. The form drag coefficient from surface feature variability shows lower values [less than 0.5-1 × 10(exp. −3)] in the Beaufort/Chukchi Seas, compared with higher values [greater than 0.5-1 ×10(exp. −3)] in the more deformed ice regimes of the Central Arctic (north of Greenland and the Canadian Archipelago), which increase with coastline proximity. The results show moderate interannual variability, including a strong increase in the form drag coefficient from 2013 to 2014/2015 north of the Canadian Archipelago. The form drag coefficient estimates are extrapolated across the Arctic with Advanced Scatterometer satellite radar backscatter data, further highlighting the regional/interannual drag coefficient variability. Finally, we combine the results with existing parameterizations of form drag from floe edges (a function of ice concentration) and skin drag to produce, to our knowledge, the first pan-Arctic estimates of the total neutral atmospheric drag coefficient (in early spring) from 2009 to 2015.

sea ice↗
NASA NTRS2018

Performance of Cassini Reaction Wheel Friction Compensation Scheme During Spin Rate Zero-Crossing and Drag Spikes

Cassini uses reaction wheels to achieve the spacecraft pointing stability that is needed during imaging operations of several science instruments. The Cassini flight software makes inflight estimates of reaction wheel bearing drag torque and the reaction wheel controller uses these estimates to achieve a high level of spacecraft pointing stability. However, the Cassini drag torque estimator was designed to accurately track the bearing drag torque only in the steady state. When the physical drag torque changes abruptly (for example, during a reaction wheel spin rate reversal or when wheel bearings experienced drag spikes), the drag estimator will not be able to track the physical drag closely. This will lead to a degradation in the spacecraft pointing stability performance. For Cassini, this was not a problem because of the significant performance margin in pointing stability. However, for missions that have very challenging pointing stability requirements and that must perform well in the presence of frequent wheel rate reversals, alternative drag-compensating control schemes must be considered. To this end, alternative drag torque compensating control schemes (such as the adaptive model reference control scheme) are briefly reviewed in this paper. Selected design features used in these friction compensation schemes may be incorporated in reaction wheel controller design to improve the robustness of spacecraft pointing stability performance with regard to a wide range of reaction wheel drag torque anomalous behavior.

Lee, Allan Y↗
NASA NTRS1989

Drag measurements on a laminar-flow body of revolution in the 13-inch magnetic suspension and balance system

Low speed wind tunnel drag force measurements were taken on a laminar flow body of revolution free of support interference. This body was tested at zero incidence in the NASA Langley 13 in. Magnetic Suspension and Balance System (MSBS). The primary objective of these tests was to substantiate the drag force measuring capabilities of the 13 in. MSBS. The drag force calibrations and wind-on repeatability data provide a means of assessing these capabilities. Additional investigations include: (1) the effects of fixing transition; (2) the effects of fins installed in the tail; and (3) surface flow visualization using both liquid crystals and oil flow. Also two simple drag prediction codes were used to assess their usefulness in estimating overall body drag.

Dress, David A.↗
NASA NTRS2019

Assessment of TLE-Based Orbit Determination and Prediction for Cubesats

The IceCube satellite is a 3U cubesat which was deployed from the International Space Station Nanoracks in May 2017. IceCube uses onboard Global Positioning System (GPS) measurements for both science data processing and orbit determination; additionally, IceCube uses Two Line Element (TLE) sets provided by USSTRATCOM through Space Track for ground station acquisition. Once acquired, GPS measurements are downlinked and can be verified against nearby TLE states.TLE sets are typically used for cubesat acquisition data, however the accuracy of their propagation has a limited lifespan which can cause issues when using an older TLE to attempt spacecraft acquisition. This presentation details the merits of TLE-based orbit determination and prediction and discusses techniques for improving both. These refinements allow for improved cubesat acquisition as well as calibration and on-orbit checkout of the GPS. Using IceCube data as representative of a typical cubesat, TLE states are simulated as tracking data and processed through an Extended Kalman Filter. This filtered solution provides not only an ongoing estimate of spacecraft drag state parameters, but also improves the definitive orbit determination estimation as well as the propagation accuracy and therefore spacecraft acquisition. Next, using the definitive TLE-based solution, raw GPS measurements are introduced into the filter where the combined measurement types allow the GPS measurements to be subsequently calibrated with respect to an unknown timing bias. These analyses provide a more accurate state estimation and prediction of cubesats during early orbit operations. Additionally, these techniques showcase methods for TLE-based state estimation and GPS calibration when other methods of tracking are unavailable.

Smith, Alexander↗
NASA NTRS1973

Preliminary study of supersonic-transport configurations with low values of sonic boom

A parametric study of low-boom supersonic transport airplanes with conventional configurations was made to identify the features of specific configurations that promise relatively low sonic boom overpressures (less than 47.9 N/sq m). The range of values considered was gross weight from 28,300 to 170,000 kg; cruise Mach numbers of 2 to 3.2; and wing loadings of 1436, 2870, and 4309 N/sq m. Fuselage length was varied from 49.1 to 102.4 m and fuselage diameter from 2.75 to 3.98 m. A nominal Mach 2 configuration weighing 56,700 kg and having a wing loading of 2870 N/sq m was selected; and its gross geometric, aerodynamic, and structural features were estimated. At a cruise altitude of 18,300 m, lift-drag ratio was estimated to be 7.35, while sonic boom overpressure was 41.7 N/sq m. Takeoff thrust loading using four afterburning turbojet engines at maximum dry thrust was 0.32. Payload for a 4440-km range was 16.7 percent of gross weight, giving a direct operating cost of 0.82 cent per seat statute mile.

Dugan, J. F., Jr.↗
NASA NTRS1980

Induced drag ideal efficiency factor of arbitrary lateral-vertical wing forms

A relatively simple equation is presented for estimating the induced drag ideal efficiency factor e for arbitrary cross sectional wing forms. This equation is based on eight basic but varied wing configurations which have exact solutions. The e function which relates the basic wings is developed statistically and is a continuous function of configuration geometry. The basic wing configurations include boxwings shaped as a rectangle, ellipse, and diamond; the V-wing; end-plate wing; 90 degree cruciform; circle dumbbell; and biplane. Example applications of the e equations are made to many wing forms such as wings with struts which form partial span rectangle dumbbell wings; bowtie, cruciform, winglet, and fan wings; and multiwings. Derivations are presented in the appendices of exact closed form solutions found of e for the V-wing and 90 degree cruciform wing and for an asymptotic solution for multiwings.

Deyoung, J.↗
NASA NTRS1979

The effect of disturbance on a wing

Disturbances such as flap and aileron hinges and poorly faired spoilers were simulated in a computer wind tunnel. The total drag of a single roughness element does not depend only on the size of that element. Its position on the wing has a surprisingly strong effect. In particular, a roughness element on the convex side of a deflected flap or aileron causes a very substantial increase in drag. Very few experimental data are available for comparison. Good agreement with experiment can be achieved, however, by adapting a fictive step size. The correlation between the real roughness-element size and the drag increase remains to be determined. Simple, fundamental experiments are suggested which will allow a theoretical estimation of the drag increase due to roughness elements.

Eppler, R.↗
NASA NTRS1993

Analysis and evaluation of an integrated laminar flow control propulsion system

Reduction of drag has been a major goal of the aircraft industry as no other single quantity influences the operating costs of transport aircraft more than aerodynamic drag. It has been estimated that even modest reduction of frictional drag could reduce fuel costs by anywhere from 2 to 5 percent. Current research on boundary layer drag reduction deals with various approaches to reduce turbulent skin friction drag as a means of improving aircraft performance. One of the techniques belonging to this category is laminar flow control in which extensive regions of laminar flow are maintained over aircraft surfaces by delaying transition to turbulence through the ingestion of boundary layer air. While problems of laminar flow control have been studied in some detail, the prospect of improving the propulsion system of an aircraft by the use of ingested boundary layer air has received very little attention. An initial study for the purpose of reducing propulsion system requirements by utilizing the kinetic energy of boundary layer air was performed in the mid-1970's at LeRC. This study which was based on ingesting the boundary layer air at a single location, did not yield any significant overall propulsion benefits; therefore, the concept was not pursued further. However, since then it has been proposed that if the boundary layer air were ingested at various locations on the aircraft surface instead of just at one site, an improvement in the propulsion system might be realized. The present report provides a review of laminar flow control by suction and focuses on the problems of reducing skin friction drag by maintaining extensive regions of laminar flow over the aircraft surfaces. In addition, it includes an evaluation of an aircraft propulsion system that is augmented by ingested boundary layer air.

Keith, Theo G., Jr.↗
NASA NTRS1981

Aerodynamic tests and analysis of a turbojet-boosted launch vehicle concept (spacejet) over a Mach number range of 1.50 to 2.86

Results from analytical and experimental studies of the aerodynamic characteristics of a turbojet-boosted launch vehicle concept through a Mach number range of 1.50 to 2.86 are presented. The vehicle consists of a winged orbiter utilizing an area-ruled axisymmetric body and two winged turbojet boosters mounted underneath the orbiter wing. Drag characteristics near zero lift were of prime interest. Force measurements and flow visualization techniques were employed. Estimates from wave drag theory, supersonic lifting surface theory, and impact theory are compared with data and indicate the ability of these theories to adequately predict the aerodynamic characteristics of the vehicle. Despite the existence of multiple wings and bodies in close proximity to each other, no large scale effects of boundary layer separation on drag or lift could be discerned. Total drag levels were, however, sensitive to booster locations.

Riebe, G. D.↗
NASA NTRS1991

The computation of induced drag with nonplanar and deformed wakes

The classical calculation of inviscid drag, based on far field flow properties, is reexamined with particular attention to the nonlinear effects of wake roll-up. Based on a detailed look at nonlinear, inviscid flow theory, it is concluded that many of the classical, linear results are more general than might have been expected. Departures from the linear theory are identified and design implications are discussed. Results include the following: Wake deformation has little effect on the induced drag of a single element wing, but introduces first order corrections to the induced drag of a multi-element lifting system. Far field Trefftz-plane analysis may be used to estimate the induced drag of lifting systems, even when wake roll-up is considered, but numerical difficulties arise. The implications of several other approximations made in lifting line theory are evaluated by comparison with more refined analyses.

Kroo, Ilan↗
NASA NTRS1990

The computation of induced drag with nonplanar and deformed wakes

The classical calculation of inviscid drag, based on far field flow properties, is re-examined with particular attention to the nonlinear effects of wake roll-up. Based on a detailed look at nonlinear, inviscid flow theory, the paper concludes that many of the classical, linear results are more general than might have been expected. Departures from the linear theory are identified and design implications are discussed. Results include the following: wake deformation has little effect on the induced drag of a single element wing, but introduces first order corrections to the induced drag of a multi-element lifting system. Far field Trefftz-plane analysis may be used to estimate the induced drag of lifting systems, even when wake roll-up is considered, but numerical difficulties arise. The implications of several other approximations made in lifting line theory are evaluated by comparison with more refined analyses.

Kroo, Ilan↗
NASA NTRS1988

Yarkovsky thermal drag on LAGEOS

Based on a thermal model including the radiative heat transfer between the retroreflector, its mounting rings, and the aluminum cavity in which it sits, it is estimated that thermal drag accounts for about 70 percent of the observed average drag on the LAGEOS satellite. It is found that neutral particle drag accounts for about 13 percent of the average drag, with charged particle drag accounting for at least 5 percent. It is suggested that the remaining 12 percent is probably due to charged particle drag as well.

Rubincam, David Parry↗
NASA NTRS1975

Propeller blockage research needs

The effect of mutual propeller/nacelle of fuselage interference on aircraft propulsive efficiency is studied in order to determine accurate drag levels from flight test data by accurately estimating installed thrust and drag and the resulting aircraft performance.

Tumlinson, R. R.↗
NASA NTRS1989

An Euler analysis of a High-Speed Civil Transport (HSCT) concept at Mach 3

A marching Euler solver, GEM3D, was used to predict the Mach 3 flow field for the wing and body of a High-Speed Civil Transport concept. The analysis focused on a typical cruise lift coefficient of 0.1 at alpha = 3 deg. The Euler solution indicated that embedded shocks formed on the upper surface of the inboard wing panel and at the leading-edge of the outboard wing panel, due to its supersonic leading edge condition. According to a simple static-pressure criterion, the embedded wing upper-surface shocks were sufficiently strong to separate a turbulent boundary layer. Comparison of aerodynamic coefficients from the Euler solver with those from linear theory shows that the linear theory estimates of lift and drag are optimistic, which would lead to optimistic estimates of cruise range.

Pittman, James L.↗
NASA NTRS1985

Comparison of predicted and measured drag for a single-engine airplane

Renewed interest in natural laminar flow (NLF) has rekindled designers' concerns that manufacturing deviations, (loss of surface contours or other surface imperfections) may destroy the effectiveness of NLF for an operational airplane. This paper reports on experimental research that compares predicted and measured boundary layer transition, total drag, and two-dimensional drag coefficients for three different wing surface conditions on an airplane typical of general aviation manufacturing technology. The three flight test phases included: (1) assessment of an unpainted airframe, (2) flight tests of the same airplane after painstakingly filling and sanding the wings to design contours, and (3) similar measurements after this airplane was painted. In each flight phase, transition locations were monitored using either sublimating chemicals or pigmented oil. As expected, total drag changes were difficult to measure. Two-dimensional drag coefficients were estimated using the Eppler-Somers code and measured with a wake rake in a method very similar to Jones' pitot traverse method. The net change in two-dimensional drag was approximately 20 counts between the unpainted airplane and the 'hand-smoothed' airplane for typical cruise flight conditions.

Ward, D. T.↗